共找到 2055 条与 航空与航天用非金属材料 相关的标准,共 137 页
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm; German and English version EN 4491:2013
Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD; German and English version EN 2844:2013
Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD; German and English version EN 2839:2013
O-Ring, Molded from AMS 7379 Rubber for Use with AS 5205 Ports
This specification covers a acrylonitrile- butadiene (NBR) rubber in the manufacturer of molded seals. These products have been used typically at temperatures from -65 degrees F (-54 degrees C) to +180 degrees F (+182 degrees C) where resistance to fuel is required, but usage is not limited to such applications. Each application should be considered individually.
Acrylonitrile-butadiene (NBR) Rubber for Fuel-Resistant Seals 60 to 70
This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings, compressions seals, o-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.
Rubber: Butadiene-Acrylonitrile (NBR) Synthetic Lubricant Resistant 67-75 Hardness for Seals in Synthetic Lubricant Systems
This specification establishes the requirements for a polysulfide sealing compound in putty consistency to be used for form-in-place sealing of removable doors, skins, and panels.
Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm; German and English version EN 4488:2013
Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD; German and English version EN 3697:2013
Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass; German and English version EN 3862:2013
Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shaped.
Acrylonitrile Butadiene (NBR) Rubber, Hot Oil Resistant, Low Swell, 75-85
This specification establishes the engineering requirements for producing thick coatings of polytetrafluoroethylene (PTFE) resin on parts and the properties of such coatings. Primarily to provide dry lubrication, high heat stability, and corrosion protection on parts which operate at not higher than 527 degrees F (275 degrees C) for limited periods or not higher than 473 degrees F (245 degrees C) for extended periods. This coating is usually smoother than that of AMS 2515. This coating may also be used as a release film for molds.
Polytetrafluoroethylene (PTFE) Resin Coating, High Build, 698-752°F (370-400°C) Fusion
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. Primarily for hose, packings, bushings, grommets, and seals in contact with hot, petroleum-base lubricating oils and glycol-type coolants from -40 degrees to +212 degrees F (-40 degrees to +100 degrees C).
Acrylonitrile Butadiene (NBR) Rubber, Hot Oil and Coolant Resistant, Low Swell, 55-65
This document establishes standard requirements for aerospace sealants and adhesion promoters, which may be incorporated as part of Aerospace Material Specifications (AMS) for such products. This document provides for commonality of methods and procedures for responsibility for inspection, source inspection, classification of tests, establishment of/and qualification to qualified products lists, approval, reports, resampling and retesting, packaging, and marking.
Standard Requirements for Aerospace Sealants and Adhesion Promoters
This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one type of sprayable fuel resistant polythioether urethane sealing compound supplied as a two-component system. This sealing compound has been used typically for sealing metal and composite integral fuel tanks by spray application, but usage is not limited to such applications. It can be used for original fuel tank sealing of seams, joints, fasteners and fay surface edges or for repair of convent
Sealing Compound, Sprayable, for Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350°F (177°C)
Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance; German and English version EN 4594:2013
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号