V13 航空与航天用非金属材料 标准查询与下载

SAE AMS-I-7444A-2013 柔性电气绝缘套管

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers flexible extruded, vinyl plastic tubing.

Insulation Sleeving, Electrical, Flexible

SAE AS5127B-2013 航空航天密封剂的双组分合成橡胶化合物用航空航天标准试验方法

This standard describes the accepted methods used for preparing aerospace sealant test specimens for qualification and quality conformance or acceptance testing. AS5127/1 and AS5127/2 are to be used in conjunction with this document and the applicable AMS specifications.

Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens

SAE AMS7259E-2013 橡胶 燃油系统和特殊内燃机油系统里密封剂用氟橡胶(FKM)高温/抗流体阻尼元件/硬度85至95

This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, O-ring cord, compression seals and molded-in-place gaskets for aeronautical and aerospace applications. These products have been used typically as sealing rings, compression seals, O-ring cord, and molded-in-place gaskets in contact with air and a wide variety of fuels, lubricants, and specific hydraulic fluids from but usage is not limited to such application. Each application should be considered individually. This class of fluoroelastomers is not recommended for use in high temperature stabilized, ""HTS"", engine oils. Each ""HTS"" oil should be evaluated separately. This fluor

Rubber: Fluorocarbon (FKM) High-Temperature/Fluid Resistant Low Compression Set /85 to 95 Hardness for Seals in Fuel Systems and Specific Engine Oil Systems

EN 3864:2013 航空航天系列.非金属材料.玻璃透明度.试验方法.抗裂系数的测定

This European Standard defines the requirements for the determination of the modulus of rupture of glass transparencies for aircraft applications, whether in the annealed or chemically or thermally tempered condition.

Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture

DIN EN 4106:2013 航空航天系列. 非金属材料. 结构型粘合系统. 糊状粘合剂. 技术规范; 德文和英文版本EN 4106-2013

Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification; German and English version EN 4106:2013

DIN EN 3861:2013 航空航天系列. 非金属材料. 玻璃透明度. 材料标准. 热处理碱石灰浮法玻璃; 德文和英文版本EN 3861-2013

Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass; German and English version of EN 3861:2013

DIN EN 4491:2013 航空航天系列. 非金属材料. 厌氧可聚合化合物. 螺纹锁固. 抗扭强度16 Nm; 德文和英文版本EN 4491-2013

Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm; German and English version EN 4491:2013

DIN EN 2847:2013 航空航天系列.丁腈橡胶(NBR).耐燃油和合成油.硬度70 IRHD(国际橡胶硬度).德文和英文版本EN 2847-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD; German and English version EN 2847:2013

DIN EN 2842:2013 航空航天系列.丁腈橡胶(NBR).耐矿物油.硬度70 IRHD(国际橡胶硬度).德文和英文版本EN 2842-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD; German and English version EN 2842:2013

DIN EN 2849:2013 航空航天系列.丁腈橡胶(NBR).耐燃油和合成油.硬度90 IRHD(国际橡胶硬度).德文和英文版本EN 2849-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD; German and English version EN 2849:2013

DIN EN 2843:2013 航空航天系列.丁腈橡胶(NBR).耐矿物油.硬度80 IRHD(国际橡胶硬度).德文和英文版本EN 2843-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD; German and English version EN 2843:2013

DIN EN 2841:2013 航空航天系列.丁腈橡胶(NBR).耐矿物油.硬度60 IRHD(国际橡胶硬度).德文和英文版本EN 2841-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD; German and English version EN 2841:2013

DIN EN 2838:2013 航空航天系列. 氯丁二烯橡胶 (CR). 热阻. 硬度70 IRHD; 德文和英文版本EN 2838-2013

Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD; German and English version EN 2838:2013

DIN EN 3102:2013 航空航天系列. 密封剂. 试验方法. 低温柔韧性的测定; 德文和英文版本EN 3102-2013

Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013

DIN EN 3698:2013 航空航天系列. 丁腈橡胶 (NBR). 低温耐性. 硬度70 IRHD; 德文和英文版本EN 3698-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD; German and English version EN 3698:2013

DIN EN 2844:2013 航空航天系列.丁腈橡胶(NBR).矿物油耐性.硬度90国际橡胶硬度(IRHD).德文和英文版本EN 2844-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD; German and English version EN 2844:2013

DIN EN 3863:2013 航空航天系列.非金属材料.玻璃透明胶片.试验方法.平面度的确定.德文和英文版本EN 3863-2013

Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of flatness; German and English version EN 3863:2013

DIN EN 2846:2013 航空航天系列.丁腈橡胶(NBR).耐燃油和合成油.硬度60 IRHD(国际橡胶硬度).德文和英文版本EN 2846-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD; German and English version EN 2846:2013

DIN EN 4492:2013 航空航天系列.非金属材料.厌氧聚合物.螺纹锁.扭矩强度19 Nm.德文和英文版本EN 4492-2013

Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm; German and English version of EN 4492:2013

DIN EN 2845:2013 航空航天系列.丁腈橡胶(NBR).耐燃和合成抗油性.硬度50 IRHD(国际橡胶硬度).德文和英文版本EN 2845-2013

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD; German and English version EN 2845:2013