V44 生命保障系统与设备 标准查询与下载

SAE ARP1523C-2014 空气隔绝容器.热有效性要求

This SAE Aerospace Recommended Practice (ARP) delineates the minimum operational requirements that will ensure that perishable cargoes in insulated standard airborne containers are kept in prime condition during the ground handling and air transportation cycle for a maximum period of 36 h.

Air Mode Insulated Containers - Thermal Efficiency Requirements

CFR 14-135.168-2014 航空和航天. 第135部分:通勤和按需运营和管理登上该飞机上的人的规则. 第135.168节:应急设备:水上旋翼机操作.

(a) Definitions. For the purposes of this section, the following definitions apply

Aeronautics and Space. Part135:Operating requirements: Commuter and on demand operations and rules governing persons on board such aircraft. Section135.168:Emergency equipment: Overwater rotorcraft operations.

HB 7046-2013 民用运输类飞机驾驶员座椅通用要求

General requirements for pilot seats of civil transport aircraft

HB 8394-2013 民用运输类飞机连续供氧系统通用要求

本标准规定了民用运愉类飞机连续供氡系统的设计、 駿旺要諦ˋˋ 本标准适用于飞行高度不大于 13 恤 的民用运输类飞机连续乓氧系统的研制=

General requirements for continuous oxygen supply system of civil transport aircraft

HB 7047-2013 民用运输类飞机旅客座椅通用要求

本标准规定了民用运输类飞机旅客座椅的设计、试验和驗收的通用要求。 本标准适用于民用运输类飞机旅客座椅的研制。

General requirements for passenger seats of civil transport aircraft

SAE ARP5252A-2013 紧急便携式滑梯/救生艇

This SAE Aerospace Recommended Practice (ARP) recommends design features for facilitating relocation of portable slide/rafts for deployment at an alternate exit under ditching conditions.

Emergency Portability of Slide/Rafts

SAE ARP1176A-2013 氧气系统与组件的清洁

This SAE Aerospace Recommended Practice (ARP) provides recommended practices for cleaning aircraft oxygen equipment such as tubing, pieces parts (including regulator and valve parts), cylinders and ground-based equipment that may be used to support aircraft oxygen systems. This revision introduces a cleanliness coding scheme that can be referenced as a requirements, and/or referenced to identify compliance to meeting such a requirements. These methods may apply to gaseous and liquid oxygen equipment. This document specifies work area details, methods to select suitable cleaning chemicals, cleaning methods, test methods to verify cleanliness level, and metho

Oxygen System and Component Cleaning

SAE AIR6036-2013 利用富氧气体混合物的乘客缺氧保护

Currently, existing civil aviation standards address the design and certification of oxygen dispensing devices that utilize oxygen sources supplying at least 99.5% oxygen. This Aerospace Information Report discusses issues relating to the use in the passenger cabin of oxygen enriched breathing gas mixtures having an oxygen content of less than 99.5% and describes one method of showing that passenger oxygen dispensing devices provide suitable hypoxia protection when used with such mixtures.

Passenger Hypoxia Protection Utilizing Oxygen Enriched Gas Mixtures

SAE AS1426A/2B-2013 标准空厨系统规范.附录II:20.0数据要求和规程

Standard Galley System Specification Appendix II 20.0 Data Requirements and Procedures

SAE AS8040B-2013 内燃式热交换型飞机暖风装置

This SAE Aerospace Standard (AS) covers combustion heaters used in the following applications: a. cabin heating (all occupied regions and windshield heating); b. wing and empennage anti-icing; c. engine and accessory heating (when heater is installed as part of the aircraft); d. aircraft de-icing. This document details the minimum safety, performance, design, and testing requirements for combustion heaters and certain auxiliary devices that are considered necessary for the utilization of heaters in fixed and rotary wing aircraft. This standard is to be considered currently applicable and necessarily subject to revision from time to time due to advances in t

Heater, Aircraft, Internal Combustion Heat Exchanger Type

SAE J140-2013 空气制动阀试验规程

This SAE Recommended Practice describes test procedures for evaluating hardware used in motor vehicle seat belt assemblies. Related hardware performance requirements are described in SAE J141. Test procedures and performance requirements for retractors will be covered in separate SAE Recommended Practices to be issued later.

Seat Belt Hardware Test Procedure

KS V ISO 9097:2013 小型船舶.电风扇

이 표준은 소형선박의 기계적인 통풍이 요구되는 기관실, 취사장 및 기타 공간에 사용하기 위

Small craft－Electric fans

SAE AIR825D-2012 飞机用氧气设备

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This report provides information on the design and use of aircraft oxygen systems. It explains the physiological oxygen requirements of the human body in both a normal environment and in an hypoxic environment. It includes an overview of the continuous flow, demand and pressure demand, and liquid oxygen systems. A basic understanding of how each system operates is then specifically addressed in its own titled section. The ch

Oxygen Equipment for Aircraft

SAE AIR1223B-2012 民航机内液压氧系统的安装

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared "NONCURRENT" as of March 1999. It is recommended, therefore, that this document not be specified for new designs. Liquid supply systems for breathing oxygen for the crew and/or passengers of transport aircraft require design and installation considerations, which are detailed herein. AIR 825, Oxygen Equipment for Aircraft, contains general information on determination of breathing oxygen

Installation of Liquid Oxygen Systems in Civil Aircraft

SAE AS1356-2012 救生艇

This SAE Aerospace Standard (AS) establishes Minimum Performance Standards (MPS) for life rafts carried on board aircraft. This document is not intended to specify particular design methods, mechanisms, or equipment to be used to accomplish the objectives established herein. The purpose of this AS is to improve the performance of life rafts carried on transport aircraft, by ensuring that their design and function support rapid and effective use as group flotation aids after an emergency landing in water (ditching). ARP1356A has been converted to AS1356, at the request of the FAA, to support revision of Technical Standard Order C-70.

Life Rafts

SAE ARP1282B-2012 救生背包.救生艇和滑梯/救生艇

This SAE Aerospace Recommended Practice (ARP) applies to survival kits to be carries with life rafts or slide/rafts on transport category airplanes flying extended over water routes and equipped with approved satelite alerting devices (e.g. 406 MHz Emergency Locator Transmitter (ELT)), available for deployment after an emergency landing. The purpose of this document is to establish the minimum contents for survival kits so as to enhance health and survivability of airplane occupants after a planned or unplanned landing on open water or a remote land environment.

Survival Kit - Life Rafts and Slide/Rafts

SAE AIR6190-2012 飞机乘客用医用氧气供应

This document provides information on provisions for passengers with disabilities on board commercial aircraft. In this context the term "provision of medical oxygen" shall be understood as application of oxygen on board an aircraft not linked to (post) decompression in the sense of Airworthiness Requirements FAR/CS 25 and Operational Regulations of FAR 121/135. Information about available equipment and physiological treatment in clinical practice will be provided in this document. It covers the use of oxygen concentrators according to guidance of FAR Advisory Circular AC120-95.

Provisions of Medical Oxygen for Aircraft Occupants

SAE AS8059-2012 手提便携式氧气收集器

This SAE Aerospace Standard (AS) applies to a personal, portable oxygen concentrator (POC) to be supplied and used by a passenger requiring supplemental oxygen therapy while traveling on board civil, commercial, or personal aircraft. It covers a POC during both self-powered battery operation and while powered from an aircraft seat's electrical power through the use of an accessory adapter. The POC is not intended to be connected to the aircraft's oxygen systems or to be used by any aircraft personnel in any method of treatment or first aid of the general flying public.

Carry-On Portable Oxygen Concentrators

SAE AIR805C-2011 商用运输飞机喷气式风挡除雨系统

The purpose of this information report is to present factors which affect the design and development of jet blast windshield rain removal systems. Rain removal system design will generally be unique to specific aircraft. Design of these systems typically requires a preliminary design for the system based on available empirical data to be followed with a laboratory development program and a flight test validation program. Published windshield rain removal performance test data is available only for limited windshield configurations.

Jet Blast Windshield Rain Removal Systems for Commercial Transport Aircraft

SAE AS6040-2010 无人系统联合体系结构(JAUS)人机界面(HMI)设施装置

This document defines a set of standard application layer interfaces called JAUS HMI Services. JAUS Services provide the means for software entities in an unmanned system or system of unmanned systems to communicate and coordinate their activities. The HMI Services represent the platform-independent Human Machine Interface (HMI) capabilities commonly found across all domains and types of unmanned systems. Five services are defined in this document: Drawing; Pointing Device; Keyboard; Digital Control; Analog Control Each service is described by a JAUS Service Definition (JSD) which specifies the message set and protocol required for compliance. Each JSD is fully compliant with the JAUS Service Interface Definition Language (JSIDL) (AS5684). The purpose of this document is to provide unmanned systems, subsystems, and payloads a standard message set for the definition of HMI drawing functions and associated control mechanisms. While this standard does not mandate a particular application, a common use allow an unmanned system to provide a consistent user interface across a variety of Operator Control Units (OCUs).

JAUS HMI Service Set