W55 纺织制品综合 标准查询与下载

FZ/T 62043-2021 聚氨酯离型转印沙发面料

Polyurethane release transfer printing sofa fabric

DIN EN ISO 1833-18:2021 纺织品. 定量化学分析. 第18部分: 丝绸、羊毛或其他动物毛发的混合（硫磺酸法）(ISO 1833-18-2020); 德文版本EN ISO 1833-18-2020

This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after removal of non-fibrous matter, in textiles made of mixtures of silk with wool or other animal hair.

Textiles - Quantitative chemical analysis - Part 18: Mixtures of silk with wool or other animal hair (method using sulfuric acid) (ISO 1833-18:2020); German version EN ISO 1833-18:2020

DIN EN ISO 1833-3:2021 纺织品. 定量化学分析. 第3部分: 纤维素和聚酯纤维的混合(硫酸法)(ISO 1833-3-2020);德文版本EN ISO 1833-3-2020

This document specifies a method, using acetone, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of acetate with wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, ab

Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate with certain other fibres (method using acetone) (ISO 1833‐3:2020); German version EN ISO 1833-3:2020

DIN EN ISO 1833-12:2021 纺织品. 定量化学分析. 第12部分: 丙烯酸纤维素, 人造纤维, 含氯纤维, 弹性纤维及其他纤维混织物(二甲基甲酰胺法)(ISO 1833-12-2020); 德文版本EN ISO 1833-12-2020

This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane f

Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) (ISO 1833-12:2020); German version EN ISO 1833-12:2020

DB43/T 454-2021 公共用纺织产品安全技术规范

Safety technical specification for textile products for public use

BS EN ISO 1833-3:2020 纺织品. 定量化学分析. 醋酸纤维以及某些特定纤维混合物(丙酮法)

Textiles. Quantitative chemical analysis. Mixtures of acetate with certain other fibres (method using acetone)

FORD ASL TEXTILE-15H-2020 核准来源清单（ASL）-纺织类-纱线

APPROVED SOURCE LIST (ASL) - CATEGORY TEXTILE - THREADS

DB14/T 1653-2018 单件纺织制品质量测定

各类单件纺织制品质量的测定

Determination of the quality of a single piece of textile product

ASTM D3786/D3786M-18 织物破裂强度的标准试验方法.薄膜破裂强度试验器法

5.1 This method for the determination of diaphragm bursting strength of knitted, nonwoven and woven fabrics is being used by the textile industry for the evaluation of a wide variety of end uses. 5.2 In cases where test results obtained using the procedures in Test Method D3786 have not been correlated with actual performance, Test Method D3786 is considered satisfactory for acceptance testing of commercial shipments of textile fabrics for bursting strength since the method has been used extensively in the trade for acceptance testing. In cases where disagreement arising from differences in values reported by the purchaser and the supplier when using Test Method D3786 for acceptance testing, the statistical bias, if any, between the laboratory of the purchaser and the laboratory of the supplier should be determined with comparison based on testing specimens randomly drawn from one sample of material of the type being evaluated. Note 2: The kind of load transfer and stretch that occur when knitted goods and nonwoven fabrics are worn are prevented by clamping them as described in this method. 1.1 This test method describes the measurement of the resistance of textile fabrics to bursting using a hydraulic or pneumatic diaphragm bursting tester. This test method is generally applicable to a wide variety of textile products. 1.2 This test method may also be applicable for stretch woven and woven industrial fabrics such as inflatable restraints. As new materials that may exceed the range of the instrument are developed, please refer to the reporting section and consider using Test Methods D3787 or D6797 instead. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Note 1: For the measurement of the bursting strength by means of a ball burst mechanism, refer to Test Method D3787. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Bursting Strength of Textile Fabrics&x2014;Diaphragm Bursting Strength Tester Method

ASTM D737-18 纺织织物透气性的标准试验方法

5.1 This test method is considered satisfactory for acceptance testing of commercial shipments since current estimates of between-laboratory precision are acceptable, and this test method is used extensively in the trade for acceptance testing. 5.1.1 If there are differences of practical significance between reported test results for two laboratories (or more), comparative tests should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, ensure the test samples to be used are as homogeneous as possible, are drawn from the material from which the disparate test results were obtained, and are randomly assigned in equal number to each laboratory for testing. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If bias is found, either its cause must be found and corrected, or future test results for that material must be adjusted in consideration of the known bias. 5.2 Air permeability is an important factor in the performance of such textile materials as gas filters, fabrics for air bags, clothing, mosquito netting, parachutes, sails, tentage, and vacuum cleaners. In filtration, for example, efficiency is directly related to air permeability. Air permeability also can be used to provide an indication of the breathability of weather-resistant and rainproof fabrics, or of coated fabrics in general, and to detect changes during the manufacturing process. 5.3 Performance specifications, both industrial and military, have been prepared on the basis of air permeability and are used in the purchase of fabrics where permeability is of interest. 5.4 Construction factors and finishing techniques can have an appreciable effect upon air permeability by causing a change in the length of airflow paths through a fabric. Hot calendaring can be used to flatten fabric components, thus reducing air permeability. Fabrics with different surface textures on either side can have a different air permeability depending upon the direction of air flow. 5.4.1 For woven fabric, yarn twist also is important. As twist increases, the circularity and density of the yarn increases, thus reducing the yarn diameter and the cover factor and increasing the air permeability. Yarn crimp and weave influence the shape and area of the interstices between yarns and may permit yarns to extend easily. Such yarn extension would open up the fabric, increase the free area, and increase the air permeability. 5.4.2 Increasing yarn twist also may allow the more circular, high-density yarns to be packed closely together in a tightly woven structure with reduced air permeability. For example, a worsted gabardine fabric may have lower air permeability than a woolen hopsacking fabric. 1.1 This test method covers the measurement of the air permeability of textile fabrics. 1.2 This test method applies to most fabrics including woven fabrics, nonwoven fabrics, air bag fabrics, blankets, napped fabrics, kn......

Standard Test Method for Air Permeability of Textile Fabrics

BS EN ISO 1833-4:2017 纺织品 定量化学分析 某些蛋白质纤维与某些其他纤维的混合物（使用次氯酸盐的方法）

Textiles. Quantitative chemical analysis. Mixtures of certain protein fibres with certain other fibres (method using hypochlorite)

BS EN ISO 1833-11:2017 纺织品 定量化学分析 某些纤维素纤维与某些其他纤维的混合物（使用硫酸的方法）

Textiles. Quantitative chemical analysis. Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid)

BS EN ISO 1833-7:2017 纺织品 定量化学分析 聚酰胺与某些其他纤维的混合物（使用甲酸的方法）

Textiles. Quantitative chemical analysis. Mixtures of polyamide with certain other fibres (method using formic acid)

JIS L 0212-2:2017 织物术语汇编(不包括衣物).第2部分:室内织物产品

Glossary of textile terms (except clothes) -- Part 2: Textile interior products

BS ISO 20251:2016 纺织地板覆盖物. 水密性试验

Textile floor coverings. Water impermeability test

ASTM D7722-17 工业纺织针脚和接缝相关标准术语

1.1 This terminology covers stitches and seams related to industrial textiles. 1.2 Section 3, Terminology, is categorized into two subsections, specific to the two areas of specialization under this document. 1.2.1 Section 3.1 Relating to Seams. 1.2.2 Section 3.2 Relating to Stitches. 1.3 For other terms relating to textiles refer to Terminology D123. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Industrial Textile Stitches and Seams

BS EN ISO 12947-2:2016 纺织品 用马丁代尔法测定织物的耐磨性 试样破裂的测定

Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of specimen breakdown

DIN EN 1102:2016 纺织品.窗帘和帷幕耐燃特性.火焰垂向蔓延试样性能详细测定程序.德文版本EN 1102-2016

Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens; German version EN 1102:2016

EN 1102:2016 纺织品和纺织产品-燃烧性能-窗帘和帷幕-垂直排列试样火焰扩散测定的详细程序

This European Standard specifies a procedure to determine the flame spread of textiles for curtains and drapes by testing a vertically oriented specimen in accordance with EN ISO 6941.

Textiles and Textile Products - Burning Behaviour - Curtains and Drapes - Detailed Procedure to Determine the Flame Spread of Vertically Oriented Specimens

EN ISO 5089:2016 纺织品化学测试实验室样品和试样的制备(ISO 5089:1977)

Diese Internationale Norm legt Verfahren zum Erhalt von Laborproben textiler Materialien aus Laborsammelproben fest, die einem Prüfgut entnommen wurden, und gibt allgemeine Anweisungen für die Herstellung von Messproben geeigneter Größe für chemische Prüfungen. Für die Probenahme aus dem Prüfgut werden keine Regelungen beschrieben, da davon ausgegangen wird, dass die Laborsammelprobe mit einem geeigneten Verfahren ausgewählt wurde und für das Prüfgut repräsentativ ist.

Textiles - Preparation of laboratory test samples and test specimens for chemical testing