W60 针织综合 标准查询与下载

ISO 4921:2000 针织品 基本概念 词汇 两种语言版

This International Standard defines terms for basic knit-ting concepts. The definitions of this vocabulary are complete in them-selves; illustrations are used to clarify the content of a definition, but no standardization of any notational sys-tem is attempted.

Knitting - Basic concepts - Vocabulary

ISO 8388:1998 针织物 类型 词汇 两种语言版

1 General This International Standard defines terms for industrially produced machine knitted fabrics. 2 Definitions The definitions of this vocabulary are complete in themselves; illustrations are used to clarify the content of a definition, but no standardization of the symbolic representation of knitted fabrics is attempted.

Knitted fabrics - Types - Vocabulary

SN/T 0780-1998 出口丝类针织服装检验规程

本标准规定了出口丝类针织服装的内在质量、外观质量和包装质量以及抽样、检验条件、检验方法和检验结果的判定。 本标准适用于桑蚕丝、绢丝、化纤长丝及与其他纤维混纺或交织的针织服装检验。

Rules of inspection on knitted clothes of silk series for export

ASTM D3887-96(2008) 针织物公差的标准规范

Knitted fabrics are known to exhibit inherent variations in properties. This specification lists the tolerances for each property deemed acceptable in the trade. These tolerances can be used to determine if knitted fabrics meet specifications for properties, and provide a guide in case of dispute. Tolerances agreed upon between the purchaser and the seller shall take precedence over those listed in this specification. 1.1 This specification covers test methods and tolerances applicable to the following properties of knitted fabrics: yield, mass (weight), width, length, fabric count, bursting strength, moisture regain, thickness, extractable matter, and fiber composition. 1.2 These tolerances are applicable to knitted fabrics of all types, such as warp knits, weft knits, flat bed knits, and so forth. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Tolerances for Knitted Fabrics

ISO 4921:1993 针织.基本概念.词汇

Knitting; basic concepts; vocabulary

FZ/T 01031-1993 针织物和弹性机织物接缝强力和伸长率的测定 抓样拉伸法

本标准规定了测定纺织品直线接缝型式的接缝强力和伸长率的两种拉伸试验方法。方法A为平行拉伸法，方法B为垂直拉伸法。 本标准适用于针织物和弹性机织物及其制品。

Determination of seam strength and elongation of knitted and elastic woven fabrics - grab tensile method

FZ/T 01030-1993 针织物和弹性机织物接缝强力和扩张度的测定 顶破法

本标准规定了测定纺织品直线接缝型式的接缝强力和顶破扩张度的两种顶破试验方法。方法A为弹子顶破法，方法B为膜片顶破法。 本标准适用于针织物和弹性机织物及其制品。 本标准不适用于高弹织物。

Determination of seam strength and expansion of knitted and elastic woven fabrics Burst method

prEN 984-1992 针刺铺地织物使用表面单位面积质量的测定

Determination of the mass per unit area of the use surface of needled floorcoverings

FZ/T 70005-1992 毛针织物伸长和回复性试验方法

本标准规定用定负荷法侧定毛针织物在低负荷下的伸长和负荷终止时的残留变形。 本标准适用于毛针织物。

Test method for elongation and recovery of wool knitted fabrics

FZ/T 70003-1992 针织 基础木语

knitting basics wood language

FZ/T 70004-1992 纺织品 针织物疵点术语

Terminology for defects in textile knitted fabrics

FZ/T 70002-1991 针织物线圈密度测量法

Knitted fabric loop density measurement method

DIN 53882:1990 纺织品试验.针织品可缝纫性能的测定.针扎残损

This standard deals with the determination of the sewing behaviour of knitted fabrics.

Testing of textiles; determination of the sewing behaviour of knitted fabrics; needle cutting damage

BS 7343:1990 针织物疵点术语表

This International Standard describes defects which commonly appear during the inspection of knitted piece-goods. The purpose of this International Standard is to define knitted-fabric defects, i.e. those characteristics that have been uninten-tionally introduced into the fabric. The presence of one or other of these characteristics in a fabric does not automatically imply that the fabric is sub-standard. Textile suppliers and purchasers will still have to reach agreement on whether a defect is pre-sent. If it is considered that a defect is present they will then have to agree on the limits of the defect and on any allowance to be made, bearing in mind the intended use of the fabric. Sections 2 to 6 of this International Standard cover the follow-ing groups of defects: Section 2: Yarn defects in a knitted fabric Section 3: Defects in the course direction Section 4: Defects in the length direction Section 5: Defects due to, or apparent after, dyeing, print-ing or finishing Section 6: General defects Except where otherwise stated, the descriptions apply to defects appearing in both warp-knitted fabrics and weft-knitted fabrics.

Glossary of terms for defects in knitted fabrics

ISO 8499:1990 针织物 疵点的描述 词汇 两种语言版

Knitted fabrics; description of defects; vocabulary

DOD A-A-51454 A-1989 外科棉线针织的衣料(包金箔的缝制6*48英尺)(用以代替: DOD A-A-0051454)

The General Services Administration has authorized the use of this Commercial Item Description.

STOCKINET, SURGICAL, COTTON (6 INCHES BY 48 INCHES, ROLLED AND SEWN) [Use In Lieu Of: DOD A-A-0051454]

ASTM D3787-89 针织品破裂强度测试方法.恒速横向移动球式破裂试验

1.1 This test method describes the measurement for bursting strength with a ball burst strength tester of textiles or garments that exhibit a high degree of ultimate elongation.1.2 The values stated in SI units are to be regarded as the standard.1.3 The values stated in either SI units or inch-pound units are to be regarded separately as the standard. Within the test, the inch-pound units are shown in parenthesis. The values stated in each system are not exact equivalents; therefore, each system may be used independently of the other. Combining values from the two systems may result in nonconformance within the specification.Note 18212;For the measurement of bursting strength with a hydraulic testing machine, refer to Test Method D 3786.1.4 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to us.

Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test

BS 5441:1988 针织品试验方法

Tests for barriness, fabric construction, wales and courses per centimetre and linear density of component yarns. Also stitch and course length of weft knitted and run-in of warp knitted fabrics.

Methods of test for knitted fabrics

NF G07-160:1988 纺织品.装饰合成织物接头经纱织物道

Textiles. Passage of furnishing synthetic fibres through fabric.

ASTM D4769-88(2000) 纺织品和较舒适经纱针织品

1.1 This specification covers woven and warp knitted comforter fabrics, composed of any textile fiber, or mixture of fibers. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 The following safety hazards caveat pertains only to the test methods described in this specification: This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Woven and Warp Knitted Comforter Fabrics