Y20 日用玻璃、陶瓷、搪瓷、塑料制品综合 标准查询与下载
共找到 173 条与 日用玻璃、陶瓷、搪瓷、塑料制品综合 相关的标准，共 12 页
本标准规定了日用陶瓷单位产品能源消耗限额的术语和定义、规定、能源消耗统计范围、统计方法及计算方法、节能管理与措施。本标准适用于日用陶瓷生产企业进行能源消耗的计算、控制和考核。
The norm of energy consumption per unit products of domestic ceramics
- ICS
- 81.060.01
- CCS
- Y20
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了亮金水、亮钯金水的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存、保用期限。本标准适用于装饰陶瓷和玻璃制品所用的亮金水和亮钯金水。
Bright liquid gold and bright liquid platinum
- ICS
- 81.060.01
- CCS
- Y20
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了骨质瓷器用骨炭的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于骨质瓷器用骨炭。
Bone charcoal for bone china
- ICS
- 81.060.01
- CCS
- Y20
- 发布
- 2014-05-06
- 实施
- 2014-10-01
Technical specification for application of foamed ceramic insulation board external wall insulation system
- ICS
- 81.060.99
- CCS
- Y20
- 发布
- 2014-01-15
- 实施
- 2014-02-15
이 표준은 모든 세라믹 타일의 열적 충격에 대한 저항을 결정하는 시험방법을 규정한다.이해 당사자 간의 합의가 없는 한, 타일의 수분 흡수율에 따라 함침 또는 비함침 시험 과정을 거친다.
Ceramic tiles — Part 9: Determination of resistance to thermal shock
- ICS
- 91.100.23
- CCS
- Y20
- 发布
- 2013-12-19
- 实施
- 2013/12/19
이 표준은 단일체 세라믹스의 마찰 계수와 비마모 속도를 측정하는 방법으로서, 구형 시험편과 원판모양 시험편을 마찰시키는 볼-온-디스크법에 의한 시험방법에 대하여 규정한다.
Fine Ceramics (Advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
- ICS
- 81.060.30
- CCS
- Y20
- 发布
- 2013-12-19
- 实施
- 2013/12/19
이 표준은 소지재료가 강판 또는 주철의 법랑제품 및 법랑부품의 유효면1)의 품질 시험방법에 대하여규정한다.
Vitreous and porcelain enamels ? Quality test methods of enamelled products
- ICS
- 81.080
- CCS
- Y20
- 发布
- 2013-12-19
- 实施
- 2013/12/19
이 표준은 수십에서 수백 μm인 파인 세라믹스 과립의 과립경 분포, 부피 밀도, 건조 감량, 유동도 측정 방법에 관하여 규정한다.
Fine ceramics(advanced ceramics, advanced technical ceramics)- Test methods of properties of ceramic granules
- ICS
- 81.060.30
- CCS
- Y20
- 发布
- 2013-12-19
- 实施
- 2013/12/19
이 표준은 국제적으로 받아들여지는 일반적 실험용 자기 및 실리카 도가니 종류와 뚜껑에 대해 규정한다.
Laboratory crucibles in porcelain and silica
- ICS
- 71.040.20
- CCS
- Y20
- 发布
- 2013-12-19
- 实施
- 2013/12/19
本标准规定了湿法测定日用陶瓷原料筛余量的测定方法。本标准适用于颗粒直径在45 µm以上的日用陶瓷用原料筛上物含量的测定。
Test method for sieve residue of domestic ceramic raw material
- ICS
- 81.060.01
- CCS
- Y20
- 发布
- 2012-12-28
- 实施
- 2013-06-01
本标准规定了室温至试样所需测试温度范围内,陶瓷材料平均线热膨胀系数的测定方法。本标准适用于烧成后的坯料、釉料等陶瓷材料。
Test method for mean liner thermal expansion coefficient of ceramic material
- ICS
- 81.060.10
- CCS
- Y20
- 发布
- 2012-12-28
- 实施
- 2013-06-01
本标准规定了陶瓷器抗冲击强度的试验方法。本标准适用于测定陶瓷器底部中心及边缘的抗冲击强度。
Test method for impact resistance of ceramic ware
- ICS
- 81.060.01
- CCS
- Y20
- 发布
- 2012-12-28
- 实施
- 2013-06-01
本标准规定了日用陶瓷原料含水率的测定方法。本标准适用于日用陶瓷用原料中游离水含量的测定。
Test method for water content of domestic ceramic raw material
- ICS
- 81.060.01
- CCS
- Y20
- 发布
- 2012-12-28
- 实施
- 2013-06-01
이 표준은 상온에서 단일축 시험하에 놓인 연속섬유강화 세라믹 복합재료(CFRCMCs, Co
Fine ceramics－Test method for tensile stress-strain behaviour of continuous, fibre-reinforced composites at room temperature
- ICS
- 81.060.30
- CCS
- Y20
- 发布
- 2012-11-30
- 实施
- 2012-11-30
이 표준은 이화학용 유리 기구의 모양, 치수, 부피 및 질량에 대하여 규정한다.
Shape and dimension of glass apparatus for chemical analysis
- ICS
- 71.040.20;81.060.30
- CCS
- Y20
- 发布
- 2012-11-13
- 实施
- 2012-11-13
이 표준은 인공 자외선을 조사하여 수용액에서 메틸렌 블루(MB) 분해법을 이용하여 표면의
Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of photocatalytic activity of surface in an aqueous medium by degradation of methylene blue
- ICS
- 81.060.30
- CCS
- Y20
- 发布
- 2012-09-17
- 实施
- 2012-09-17
이 표준은 광촉매 기능을 이용하여 수중의 오염 물질을 분해하여 정화하는 것을 목적으로 하는
Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
- ICS
- 81.060.30
- CCS
- Y20
- 发布
- 2012-07-26
- 实施
- 2012-07-26
本标准规定了用石墨炉原子吸收光谱法测定日用陶瓷中铅、镉溶出量的术语和定义、原理和方法。 本标准适用于与食物接触的日用陶瓷器皿中火焰原子吸收光谱法无法准确测量的微量铅、镉溶出量的测定，其他日用陶瓷器皿中铅、镉溶出量的测定可参照本标准执行。
Determination of Dissolution of Lead and Cadmium in Ceramics for Daily Use Graphite Furnace Atomic Absorption Spectrometry
- ICS
- 81.060
- CCS
- Y20
- 发布
- 2011-08-22
- 实施
- 2011-11-15
WARNING — This International Standard calls for the use of substances and/or procedures that may be injurious to health if adequate safety measures are not taken. This International Standard does not address any health hazards, safety or environmental matters associated with its use. It is the responsibility of the user of this International Standard to establish appropriate health, safety and environmentally acceptable practices and take suitable actions for any national and international regulations. Compliance with this International Standard does not in itself confer immunity from legal obligations. This International Standard specifies a comparative method of determining the fluidity behaviour of vitreous and porcelain enamels in the viscous condition during firing. It is not intended for use as an absolute method.
Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
- ICS
- 25.220.50
- CCS
- Y20
- 发布
- 2010-12-15
- 实施
- 2010-12-15
The fineness of the frit has a direct bearing on many of its properties, such as fusibility, tearing, gloss, opacity, suspension in the slip, and ease of spraying.1.1 These test methods cover the determination of the fineness of frit in wet- or dry-milled porcelain enamels and other ceramic coatings for metals by means of the No. 200 (75-μm) or No. 325 (45-μm) sieve. 1.2 The two methods appear as follows:
Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
- ICS
- 25.220.50 (Enamels)
- CCS
- Y20
- 发布
- 2010
- 实施
