Y20 日用玻璃、陶瓷、搪瓷、塑料制品综合 标准查询与下载

ISO 2722:1997 釉瓷和搪瓷 室温下耐柠檬酸的测定

Specifies a method of test for the determination of acid resistance, and also a method for classifying the results. ISO 2722 is not suitable for matt enamels, enamels that come in contact with hot and strong acids and enamelled articles that are used in the chemical industry.

Vitreous and porcelain enamels - Determination of resistance to citric acid at room temperature

DB37/T 257-1998 软聚氯乙烯压延（拉幅）农用无滴大棚薄膜

本标准规定了软聚氯乙烯（拉幅）农用无滴大棚薄膜的要求、试验方法、检验规则、标志、包装、运输和贮存，适用于以聚氯乙烯树脂为主要原料，加入增塑剂、稳定剂及其它助剂，采用压延拉罐工艺方法制得的软聚氯乙烯（拉幅）农用无滴大棚薄膜。

Soft PVC calendered (stenter) agricultural non-drip greenhouse film

ISO 2723:1995 薄钢板用的瓷釉和搪瓷 试样的制备

Specifies a method for the production of specimens suitable for testing enamels for sheet steel and enamelled sheet steel articles. Replaces the first edition, of which it constitutes a technical revision.

Vitreous and porcelain enamels for sheet steel - Production of specimens for testing

DIN ISO 4532:1995 釉瓷和搪瓷.瓷层抗冲击性的测定.釉瓷器耐冲击性测定.枪击试验; 等同采用 ISO 4532:1991

This document specifies a test method for determining the resistance of enamelled articles to impact.

Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test; identical with ISO 4532:1991

QB/T 2127-1995 日用陶瓷彩烤辊道窑热工性能指标监测与计算方法

本标准规定了日用陶瓷工业中彩烤陶瓷制品的辊道窑热工性能指标监测与计算方法。 本标准适用于月用陶瓷制品彩烤过程中，使用液体、固体、气体燃料以及电能的辊道窑热工性能指标监侧与计算。对于彩烤其他陶瓷制品的辊道窑、素烧辊道窑的热工基本性能指标监测与计算亦可参照本标准，并根据具体情况增删监测项目。

Monitoring and Calculation Method of Thermal Performance Indicators of Color-Baked Roller-hearth Kiln for Daily-use Ceramics

QB/T 2130-1995 日用陶瓷彩烤辊道窑热平衡、热效率测定与计算方法

本标淮规定了日用陶瓷工业中彩烤陶瓷制品辊道窑的热平衡、热效率测定与计算方法。 本标淮适用于日用陶瓷制品彩烤过程中，使用液体、固体、气体燃料以及电能的辊道窑的热平衡、热效率的测定与计算。对于彩烤其他陶瓷制品辊道窑、素烧辊道窑热平衡、热效率的测定与计算亦可参照本标准，井根据具体情况增删测定项目。

Determination and Calculation Method of Thermal Balance and Thermal Efficiency of Colored Roasting Roller Hearth Kiln for Daily-use Ceramics

QB/T 2131-1995 日用陶瓷链式干燥器热平衡、热效率测定与计算方法

本标谁规定了日用陶瓷链式千燥器的热平衡、热效率的测定与计算方法。 本标谁适用于日用陶瓷坯体干燥过程中，使用热烟气、各类窑炉余热和锅炉饱和水蒸气为干燥热源的链式干燥器热平衡、热效率的测定与计算，对于生产其他类型陶瓷坯体的链式、箱式或隧道式干燥器的热平衡、热效率测定与计算亦可参照或采用本标准。

Determination and Calculation Method of Thermal Balance and Thermal Efficiency of Daily Ceramic Chain Dryer

QB/T 2126-1995 日用陶瓷火焰隧道窑热工性能指标监测与计算方法

本标准规定了日用陶瓷火焰隧道赛热工基本性能指标监测与计算方法。 本标准适用于日用陶瓷产品生产中，使用液体、固体和气体燃料的火焰隧道赛热工基本性能监测与计算。

Monitoring and Calculation Method of Thermal Performance Index of Flame Tunnel Kiln for Daily-use Ceramics

QB/T 2129-1995 日用陶瓷工业间歇式窑炉热平衡、热效率测定与计算方法

本标准规定了日用陶瓷工业间歇式窑炉热平衡、热效率的测定与计算方法。 本标准适用于日用陶瓷产品生产中，使用液体、固体和气体燃料的间歇式窑炉热平衡、热效率的测定与计算。对于生产其他类型陶瓷产品的间歇式窑炉其热平衡、热效率的测定与计算可参照采用本标准。也可根据窑炉的具体现状增删测定项目。

Determination and Calculation Method of Heat Balance and Heat Efficiency of Batch Kiln in Household Ceramics Industry

JIS S 2006:1994 暖水瓶

この規格は，一般に保温，保冷を目的としてガラス製真空二重びん(以下。中びんという。)を用いた携帯用及び卓上用まほうびん並びに弁当用ジャー(以下，まほうびんという。)について規定する。

Vacuum bottles

JIS S 2016:1994 煤油炉

Oil burning cooking stoves

JIS S 2053:1994 不锈钢制暖水瓶

この規格は，主として飲用水の保温，保冷を目的として屋外に携帯するもので，内びんがステンレス鋼裂で，かつ，内びんの内口径が内びんの胴内径より小さい、真空二重びんを用いた携帯用まほうびん(以下，まほうびんという。)について規定する。

Stainless steel vacuum bottles

ISO 10136-4:1993 玻璃和玻璃器皿 萃取溶液的分析 第4部分:用分子吸收光谱法测定氧化铝

The principle of the method specified is complexing of the aluminium in the extract solution to be analyzed with chromazurol S, measuring the optical density of the resulting solution by means of a molecular absorption spectrometer at 545 nm using 10 mm optical cells. Measures the concentration of aluminium, expressed as its oxide AlO. Applies to the analysis of extract solutions obtained from any kind of glass or glassware including laboratory and pharmaceutical ware, food and drink packaging ware, tableware and kitchenware.

Glass and glassware; analysis of extract solutions; part 4: determination of aluminium oxide by molecular absorption spectrometry

ISO 10136-1:1993 玻璃和玻璃器皿 萃取溶液的分析 第1部分:用分子吸收光谱法测定二氧化硅

The principle of the method specified is conditioning the extract solution to be analyzed, developing the blue silicomolybdate complex using ammonium molybdate and a reducing solution, measuring the optical density of the resulting colour complex by means of a molecular absorption spectrometer at 800 nm using 10 mm optical cells. Measures the concentrations of silicon, expressed as its oxide SiO. Applies to the analysis of extract solutions obtained from any kind of glass or glassware including laboratory and pharmaceutical ware, food and drink packaging ware, tableware and kitchenware.

Glas and glassware; analysis of extract solutions; part 1: determination of silicon dioxide by molecular absorption spectrometry

ISO 10136-3:1993 玻璃和玻璃器皿 萃取溶液的分析 第3部分:用火焰原子吸收光谱法测定氧化钙和氧化镁

The principle of the method specified is measuring the portion of the 422,7 nm line absorbed by calcium atoms and of the 285,2 nm line absorbed by magnesium atoms using a flame atomic absorption spectrometer, and comparison with the absorption produced by reference solutions. Measures the concentrations of calcium and magnesium, expressed as their oxides CaO and MgO. Applies to the analysis of extract solutions obtained from any kind of glass or glassware including laboratory and pharmaceutical ware, food and drink packaging ware, tableware and kitchenware.

Glass and glassware; analysis of extract solutions; part 3: determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry

ISO 10136-2:1993 玻璃和玻璃器皿 萃取溶液的分析 第2部分:用火焰光谱法测定氧化钠和氧化钾

The principle of the method specified is spraying the extract solution into the flame of the burner of an emission or absorption spectrometer, if necessary with the addition of a spectrochemical buffer solution, or into the flame of a filter flame spectrometer without this addition. For FES and FAAS, the lines at 589,0 nm and 766,5 nm, respectively, are used and compared with the measurements of reference solutions, for a flame filter spectrometer, the specific filters are used. Measures the concentrations of sodium and potassium, expressed as their oxides NaO and KO. Applies to the analysis of extract solutions obtained from any kind of glass or glassware.

Glass and glassware; analysis of extract solutions; part 2: determination of sodium oxide and potassium oxide by flame spectrometric methods

ISO 10136-6:1993 玻璃和玻璃器皿 萃取溶液的分析 第6部分:用分子吸收光谱法测定氧化硼(III)

The principle of the method specified is complexing of the boron in the extract solution to be analyzed with azomethine H, measurement of the optical density of the resulting colour complex by means of a molecular absorption spectrometer at 415 nm using 20 mm optical cells. Measures the concentration of boron, expressed as its oxide BO. Applies to the analysis of extract solutions obtained from any kind of glass or glassware including laboratory and pharmaceutical ware made, e.g., from borosilicate glass, neutral glass, tableware and kitchenware.

Glass and glassware; analysis of extract solutions; part 6: determination of boron(III) oxide by molecular absorption spectrometry

ISO 10136-5:1993 玻璃和玻璃器皿 萃取溶液的分析 第5部分:用分子吸收光谱法和火焰原子吸收光谱法测定氧化铁(III)

The principle of the method specified is reducing the iron in the extract solution, complexing, extracting the complex into chloroform and measurement of the optical density of the resulting colour complex by means of a molecular absorption spectrometer at 533 nm or evaporating with hydrofluoric and perchloric acids, dissolving of the residue in hydrochloric acid, measuring the absorption using a flame atomic absorption spectrometer at 248,3 nm. Measures the concentration of iron, expressed as its oxide FeO. Applies to the analysis of extract solutions obtained from any kind of glass or glassware.

Glas and glassware; analysis of extract solutions; part 5: determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry

QB/T 1639-1992 陶瓷模用石膏粉

本标准规定了半水石膏粉的术语、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于陶瓷模用半水石膏粉。

Gypsum powder for ceramic mold

ISO 4532:1991 釉瓷和搪瓷 搪瓷制品抗冲击性的测定 冲击枪试验

Specifies a test method which is used as a factory production control test. The test is not intended to be used for testing the adhesion of the enamel. Annexes A and B are for information only.

Vitreous and porcelain enamels; determination of the resistance of enamelled articles to impact; pistol test