Y20 日用玻璃、陶瓷、搪瓷、塑料制品综合 标准查询与下载

JIS S 2006 AMD 1:2009 热水瓶(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS S 2006:1994 is partially replaced with this Amend- ment.

Vacuum bottles (Amendment 1)

JIS S 2053 AMD 1:2009 不锈钢热水瓶(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS S 2053:1994 is partially replaced with this Amend- ment.

Stainless steel vacuum bottles (Amendment 1)

IWA 8:2009 餐具、礼品、珠宝、灯具.玻璃透明度.分类和试验方法

This International Workshop Agreement establishes requirements for the use of the glass designations “clear glass” and “ultra-clear glass” for non-coloured glass items according to their clarity and iron content. This International Workshop Agreement specifies a procedure for measuring the clarity of glass items by means of a spectrophotometer. This International Workshop Agreement is applicable to ⎯ mineral glasses, and ⎯ glass items where a part is not covered by coating or decoration, and is therefore available for sampling. This International Workshop Agreement is applicable to the use of glass as tableware, giftware, jewellery and luminaries. This International Workshop Agreement is not applicable to the use of glass in the context of building, containers, medicine and laboratories, and to other technical uses of glass.

Tableware, giftware, jewellery, luminaries — Glass clarity — Classification and test method

DB62/T 1673-2007 爆裂啤酒瓶质量鉴定技术规范

本标准规定了爆裂啤酒瓶质量鉴定技术规范的术语和定义、啤酒瓶部位示意图、质量鉴定基本程序、质量鉴定方案、分析要求、测试方法与判定、鉴定综合分析判定准则和质量鉴定报告。本标准适用于对爆裂的啤酒瓶进行质量技术鉴定。

Technical specification for quality appraisal of burst beer bottles

KS L ISO 8289:2001 釉瓷和搪瓷.检测和确定缺陷位置的低电压试验

이 규격은 법랑으로 코팅한 제품의 결함과 결함 위치를 검출하는 방법에 대하여 규정한다. 이

Vitreous and porcelain enamels－Low voltage test for detecting and locating defects

ISO 8289:2000 釉瓷和搪瓷 检查和定位缺陷的低电压试验

This International Standard specifies two low voltage tests for detecting and locating defects that extend to the basis metal in vitreous and porcelain enamel coatings. Method A (electrical) is suitable for the rapid detection and determination of the general location of defects. Method B (optical), based on colour effects, is suitable for the more precise detection of defects and their exact locations. Method A is commonly applied to flat surfaces, whereas method B is preferred for more intricate shapes. NOTE 1 Selection of the correct test method is critical to distinguish the areas of increased conductivity detected by method B from actual pores that extend to the basis metal, which can be detected by both methods. NOTE 2 The low voltage test is a non-destructive method of detecting defects (see clause 3) and therefore, is completely differ-ent from the high voltage test specified in ISO 2746. The results of high and low voltage tests are not comparable and will differ.

Vitreous and porcelain enamels - Low voltage test for detecting and locating defects

BS ISO 13807:2000 釉瓷和搪瓷.化学工业用瓷釉的热冲击试验中裂缝形成温度的测定

The value of crack temperature determined can be used to compare relative qualities of different enamel formulations.

Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry

BS ISO 13805:2000 铝用釉瓷和搪瓷.在电解溶液的作用下铝与搪瓷粘合性的测定.

Method for accelerated determination of the resistance of porcelain enamel coatings on aluminium and its alloys to spalling as a result of exposure to moisture or weathering.

Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)

BS ISO 13804:2000 铝用釉瓷和搪瓷.试件的制备

This International Standard specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings on aluminium, as well as the enamelling process for aluminium materials.

Vitreous and porcelain enamels for aluminium - Production of specimens for testing

ISO 16028:1999 液压传动 用于压力为20 MPa(200 bar)～31.5 MPa(315 bar)的平面对接型快速接头 规范

This International Standard specifies the interface dimensions for interchangeability and specifies the performance requirements for hydraulic, flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Couplings in accordance with this International Standard are not designed to connect or disconnect under pressure. NOTE Couplings in accordance with this International Standard provide for automatic sealing of the fluid pressure on the upstream side and on the downstream side when the coupling is disconnected.

Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications

ISO 6486-2:1999 与食物接触的陶瓷制品、玻璃陶瓷制品和玻璃餐具 铅、镉溶出量 第2部分:允许极限

This part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glass dinnerware intended to be used in contact with food, but excluding porcelain enamel articles. This part of ISO 6486 is applicable to ceramic ware, glass-ceramic ware and glass dinnerware which is intended to be used for the preparation, cooking, serving and storage of food and beverages, excluding articles used in food manufacturing industries or those in which food is sold.

Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 2: Permissible limits

ISO 6486-1:1999 与食物接触的陶瓷制品、玻璃陶瓷制品和玻璃餐具 铅、镉溶出量 第1部分:检验方法

This part of ISO 6486 specifies a test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware, and glass dinnerware intended to be used in contact with food, but excluding porcelain enamel articles. This part of ISO 6486 is applicable to ceramic ware, glass-ceramic ware, and glass dinnerware which is intended to be used for the preparation, cooking, serving and storage of food and beverages, excluding articles used in food manufacturing industries or those in which food is sold.

Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Test method

QB/T 2455.2-1999 陶瓷颜料检验方法

本标准规定了陶瓷颜料检验的方法和步骤。 本标准适用于日用陶瓷釉上、釉中、釉下颜料，不适用于含萤光物质及带有金属光泽的陶瓷颜料。

Inspection methods for ceramic pigments

QB/T 2434-1999 日用陶瓷原料含水率的测定

本标准规定了日用陶瓷原料含水率测定的基本要求和方法。 本标准适用于日用陶瓷用原料中游离水含量的测定。

Determination of moisture content of daily-use ceramic raw materials

QB/T 2435-1999 日用陶瓷原料筛余量的测定

本标准规定了湿法测定日用陶瓷原料筛余量的基本要求和方法。 本标准适用于颗粒直径在63μm以上的日用陶瓷用原料筛上物含量的测定。

Determination of Sieve Residue of Daily Ceramic Raw Materials

QB/T 1010-1999 陶瓷材料颜料真密度的测定

本标准规定了陶瓷材料、颜料真密度测定的基本要求和方法。 本标准适用于陶瓷原料、坯料和颜料。

Determination of True Density of Ceramic Material Pigments

DB37/T 264-1999 农业用聚乙烯吹塑无滴薄膜

本标准规定了农业用聚乙烯吹塑无滴薄膜的要求、试验方法、检验规则、标志、包装、运输、贮存，适用于用吹塑方法制得的农业用聚乙烯吹塑无滴薄膜。

Polyethylene blown drip-free film for agriculture

ISO 8290:1998 釉瓷和搪瓷 室温下抗硫酸腐蚀的测定

This International Standard specifies a method of test for the determination of resistance to sulfuric acid, at room temperature, of vitreous and porcelain enamelled articles, and also specifies a method for classifying the results. It is particularly intended for the testing of vitreous and porcelain enamelled articles that come into contact with products of combustion containing sulfuric acid. It is not applicable to vitreous and porcelain enamels that come into contact with weak acids or hot strong acids or to vitreous and porcelain enamelled articles for use in the chemical industry. NOTES 1 For testing the resistance to citric acid of vitreous and porcelain enamels at room temperature, see ISO 2722. 2 For testing the resistance to boiling citric acid, see ISO 2742. 3 For testing the resistance to condensing hydrochloric acid vapour of vitreous and porcelain enamelled surfaces of containers and equipment used in the chemical industry, see ISO 2743.

Vitreous and porcelain enamels - Determination of resistance to sulfuric acid at room temperature

ISO 2742:1998 釉瓷和搪瓷 耐煮沸柠檬酸腐蚀性的测定

This International Standard specifies a method of test for determining the resistance of flat surfaces of vitreous and porcelain enamels to pure boiling citric acid. It is especially intended for the testing of enamels for articles which are used with boiling, slightly dissociated acids, for example cooking utensils. NOTE — This method of test is also suitable for determining the chemical resistance of enamels to other acid solutions. This method of test is not suitable for enamels used in the chemical industry or those exposed to heavy attack by inorganic acids for a long period. For testing enamels at room temperature, see ISO 2722. For testing acid resistance of enamels for containers and apparatus for the chemical industry, see ISO 2743.

Vitreous and porcelain enamels - Determination of resistance to boiling citric acid

QB/T 2298-1997 双线法测玻璃线热膨胀系数

本标准规定了双线法测定玻璃线热膨胀系数的方法。 本标准适用于测定同种玻璃及料器、搪瓷等的线热膨胀系数。

Measuring Linear Thermal Expansion Coefficient of Glass by Two-Line Method