Y24 日用陶瓷制品 标准查询与下载

QB/T 1465-2012 陶瓷原料、颜料颗粒分布测定方法

本标准规定了陶瓷原料、颜料颗粒分布测定的原理及测试条件,分散介质、分散剂及分散方法,仪器设备、测定方法和试验报告。本标准适用于测定直径不大于63 µm的陶瓷原料、颜料,及指定采用本标准的其他粉状体材料的颗粒分布情况。

Test method for particle size of ceramic raw materials and ceramic pigments

DB43/T 679-2012 中国红日用瓷器

Chinese Red Daily Porcelain

ASTM C1607-12 陶瓷器"重新加热的微波安全性"测定的标准试验方法

This test is for evaluating ceramic products that are intended for reheating in a Consumer based microwave oven. It is not intended for evaluating products that will be used in commercial type microwaves. This test method is not intended to evaluate metallic or polymeric based products. Ceramic products intended for microwave use must also be evaluated for thermal shock resistance and pass the 325°F criteria as described in Test Method C554, before being tested for microwave safety. This would include specific tests for dinnerware, cookware, drinkware and ancillary items intended for use with hot foods, such as gravy boats or any product intended for microwave use. Dishes having a metallic glaze, decoration or paint should not be used in this test or microwave ovens unless it is specifically designed for and marked as microwave safe.1.1 This test method determines the suitability of ceramicware for use in microwave re-heating applications. Microwave ovens are mainly used for reheating and defrosting frozen foods. Severe thermal conditions can occur while reheating foods. Typical reheating of foods requires one to five min. in the microwave at the highest power settings. Longer periods than five minutes are considered cooking. Cooking test methods and standards are not addressed in this test method. Most ceramicware is minimally absorbing of the microwave energy and will not heat up significantly. Unfortunately there are some products that absorb microwave energy to a greater extent and can become very hot in the microwave and pose a serious hazard. Additionally, the nature of microwave heating introduces radiation in a non-uniform manner producing temperature differentials in the food being cooked as well as the ceramic container holding it. The differential may become great enough to thermal shock the ware and create dangerous conditions. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of ldquo;Microwave Safe for Reheatingrdquo; for Ceramicware

QB/T 4253-2011 日用陶瓷器抗釉裂测定方法

本标准规定了日用陶瓷器抗釉裂性的测定方法。 本标准适用于吸水率大于0.5%且表面有釉的日用陶器、炻器、瓷器抗釉裂性的测定。

Test method for crazing resistance of domestic ceramic ware

QB/T 2455-2011 陶瓷颜料

本标准规定了陶瓷颜料的术语和定义、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于日用陶瓷釉上、釉中、釉下装饰颜料，不适用于含荧光物质的陶瓷颜料。

Ceramic color

QB/T 1503-2011 日用陶瓷白度测定方法

本标准规定了日用陶瓷器和陶瓷原料的白度、色差测定条件及测定方法。 本标准适用于日用陶瓷器和陶瓷原料的白度、色差测定。

Test method for whiteness of domestic ceramics

QB/T 4255-2011 印刷金膏

本标准规定了印刷金膏的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于装饰各种陶瓷制品和玻璃制品所用的印刷金膏。

Printing gold paste

QB/T 4254-2011 陶瓷酒瓶

本标准规定了陶瓷酒瓶的产品分类、技术要求、试验方法、检验规则和包装、标志、运输、贮存规则。 本标准适用于酿酒行业盛装食用不含气酒类的陶瓷酒瓶。

Ceramic winebottle

DB14/T 622-2011 平定砂器

Flat sander

DB35/T 1162-2011 日用陶瓷单位产品能耗限额

本标准规定了日用陶瓷单位产品能源消耗（能源消耗以下简称能耗）限额的术语与定义、能耗限额、能耗统计范围、方法及计算方法、节能管理与措施。 本标准适用于日用陶瓷生产企业进行能耗的计算、控制和考核。

Energy consumption quota per unit product of daily-use ceramics

DB41/T 664-2010 当阳峪绞胎瓷

Dangyangyu Twisted Bodied Porcelain

QB/T 1322-2010 陶瓷泥料可塑性指数测定方法

本标准规定了用压缩法测定陶瓷泥料可塑性指数的原理与方法。 本标准适用于含工作水分的陶瓷泥料。

Standard test method for plasticity index of ceramic clay

SN/T 2509-2010 出口日用陶瓷生产企业铅镉控制规范

本标准规定了出口日用陶瓷生产企业铅镉控制的质量管理体系要求。 本标准适用于出口日用陶瓷生产企业建立铅镉控制的质量管理体系。

Lead and cadmium control specifications for manufacturer of export domestic ceramicware

SN/T 2510-2010 进出口日用陶瓷铅、镉溶出量的测定方法

本标准规定了用原子吸收分光光度法测定进出口日用陶瓷制品铅、镉溶出量的测定方法。 本标准适用于进出口日用陶瓷制品的铅、镉溶出量测定(包括日用陶瓷制品与食物接触面及饮料容器唇边处的釉面)。

Test method of lead and cadmium extracted from export and import domestic ceramicware

SN/T 2508-2010 进出口日用陶瓷检验规程

本标准规定了进出口日用陶瓷的分类、检验、结果评定和不合格处置。 本标准适用于进出口日用细瓷、普瓷、炻器(瓷)和普通陶器的检验。

Rules of the inspection of import and export domestic ceramicware

ARMY QPL-49467-7-2007 一般规格的(一般用途)高电压多层陶瓷固定电容器

This list has been prepared for use by or for the Government in the actheof products covered by Specification MIL-PRF-49467. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

CAPACITOR, FIXED, CERAMIC, MULTILAYER, HIGH VOLTAGE (GENERAL PURPOSE), GENERAL SPECIFICATION FOR

ARMY QPL-39014-114-2007 一般规格的有既定可靠性和非既定可靠性(一般用途)陶瓷介质的固定电容器

This list has been prepared for use by or for the Government in the actheof products covered by Specification MIL-PRF-39014. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.

CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

ARMY QPL-55681-121-2006 一般规格有既定可靠性和非既定可靠性的.陶瓷介质的.固定多层贴片电容器

This list has been prepared for use by or for the Government in the actheof products covered by Specification MIL-PRF-55681. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.

CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

ARMY MIL-PRF-39014 G SUPP 1-2005 稳定性能最佳和非稳定性能最佳普通陶瓷电介体普通规格电容器

This supplement forms a part of MIL-PRF-39014G, dated 16 June 2005.

CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

ARMY MIL-PRF-39014 G-2005 稳定性能最佳和非稳定性能最佳普通陶瓷电介体普通规格电容器

This specification covers the general requirements for established reliability(ER) and nonestablished reliability(non-ER),(product level C), general purpose, ceramic dielectric, insulated, fixed capacitors for use in applications where appreciable variations in capacitance with respect to temperature, voltage, frequency, and life can be tolerated(see 6.1). ER capacitors covered by this specification have failure rate levels(FRL)(M, P, R,and S) ranging from 1.0 percent to 0.001 percent per 1,000 hours. These FRLs are established at a 90-percent confidence level and maintained at a 10-percent producer's risk and are based on life tests performed at maximum rated voltage at maximum rated temperature. An acceleration factor of 8:1 has been used to relate life test data obtained at 200 percent of rated voltage at maximum rated temperature, to rated voltage at rated temperature.

CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR