共找到 177 条与 日用陶瓷制品 相关的标准,共 12 页
This specification covers the general requirements for general purpose, ceramic multilayer high voltage capacitors for use in applications where appreciable variations in capacitance with respect to temperature,voltage, frequency, and life can be tolerated(BR and BZ characteristics)(see 6.1), or in critical frequency determining applications, timing circuits, and other applications where absolute stability is required(Bpcharacteristic).
CAPACITOR, FIXED, CERAMIC, MULTILAYER, HIGH VOLTAGE (GENERAL PURPOSE), GENERAL SPECIFICATION FOR
The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at http://assist.daps.dla.mil.
CAPACITOR, FIXED, CERAMIC, MULTILAYER, HIGH VOLTAGE (GENERAL PURPOSE), GENERAL SPECIFICATION FOR
This specification covers the general requirements for non-established reliability(non-ER) and established reliability(ER), ceramic dielectric, multiple layer, chip capacitors. ER capacitors covered by this specification have failure rate levels(FRL) ranging from 1.0 percent to 0.001 percent per 1,000 hours. These FRLs are established at a 90-percent confidence level and maintained at a 10-percent producer's risk and are based on life tests performed at maximum rated voltage at maximum rated temperature. An acceleration factor of 8:1 has been used to relate life test data obtained at 200 percent of rated voltage at maximum rated temperature, to rated voltage at rated temperature.
CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
This supplement forms a part of MIL-PRF-55681F, dated 3 September 2004.
CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
本标准规定了用光度法测定陶瓷原料中二氧化硅、三氧化二铝、二氧化二铁、二氧化钛、氧化钙、氧化镁、氧化钾、氧化钠和灼烧减量的分析方法。 本标准适用于陶瓷原料的化学成分常规分析。
Standard test method for chemical composition of ceramic materials by spectrophotometry
本标准规定了精细陶瓷烹调器的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于精细陶瓷烹调器皿。
Fine ceramic cookware
本标准规定了普通陶瓷烹调器的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于普通陶瓷烹调器皿。
Ordinary ceramic cookware
Rules for the inspection of black earthenwares for export
この規格は,直火用又は天火用に使用する卓上・ちゅう(厨)房用の陶磁器製耐熱食器(以下,食器という。)について規定する。
Heat resistant ceramic tablewares
本标准规定了陶瓷颜料的术语、产品分类、技术要求、试验方法、检验规则及标志、标签、包装、运输、贮存。 本标准适用于陶瓷釉上、釉中、釉下颜料。
ceramic pigment
この規格は,一般に家庭で用いる素地材料が鋼板製のほうろう器物(以下,器物という。)について規定する。
Vitreous and porcelain enamelled household warers of sheet steel
本标准规定了亮金水、亮把金水技术指标的试验方法。 本标准适用于瓷器、搪瓷、精陶和玻璃制品装饰用的亮金水、亮把金水。
Bright gold water, bright palladium gold water test method
本标准规定了亮金水、亮把金水的技术要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于装饰瓷器、搪瓷、精陶和玻璃制品所用的亮金水和亮把金水。
Bright gold water, bright palladium gold water
本标准规定了瓷石的术语、产品分类、技术要求、试验方法、检验规则和包装、标志、运输、贮存规则。 本标准适用于主要由石英、绢云母(或水云母)、长石和少量高岭石、碳酸盐及其他矿物所组成的经加工成一定细度的陶瓷工业用原料。
Porcelain stone for ceramics
Rules for the sampling of domesticceramics for export
本标准规定了日用陶瓷火焰隧道窑(以下简称“窑炉”)档案管理,安全生产,工业创窟七,计量水平,节能措施,产品烧成质量、单位能耗、热效率等经济、技术和管理等内容的评定标准。 本标准适用于从事于日用陶瓷生产的,以煤、油、气体燃料烧成的隧道窑等级评定。
Evaluation method and evaluation standard of flame tunnel kiln for daily-use ceramics
本标准规定了用油浸法、煮沸法或抽真空法测定陶瓷坯体显气孔率、体积密度。 本标准适用于陶瓷生坯和素烧坯。
Test method for apparent porosity and bulk density of ceramic body
The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Federal Specification NNN-C-25B which is cancelled.
CASSEROLE, LABORATORY (PORCELAIN)
本标准规定了日用陶瓷火焰隧道窑的热平衡、热效率的侧定与计算方法。 本标准适用于日用陶瓷产品生产中,使用液体、固体和气体燃料的火焰隧道窑的热平衡、热效率的测定与计算。对于生产其他类型陶瓷产品的隧道窑其热平衡、热效率的测定与计算可参照采用本标准。也可根据窑炉的具体现状增删测定项目。
Determination and Calculation Method of Thermal Balance and Thermal Efficiency of Flame Tunnel Kiln for Daily-use Ceramics
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号