Y26 日用搪瓷制品 标准查询与下载

SANS 1002:2006 半玻化陶器（宾馆用器皿）

covers semi-vitreous crockery suitable for use in hotels, hospitals, and other public institutions.

Semi-vitreous crockery (hotel ware)

SANS 1004:2006 非家用精致磁器和玻化餐具

covers the requirements for fine china and vitrified tableware, suitable for use in restaurants, hotels, hospitals and other public institutions.

Fine china and vitrified tableware for non-domestic use

NF A92-125-3:2006 釉瓷和搪瓷.工业用玻璃垫板设备.第3部分:耐热冲击

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3 : thermal shock resistance.

NF A92-125-1:2006 釉瓷和搪瓷.工业用玻璃垫板设备.第1部分:设备、部件、器具和附件的质量要求

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1 : quality requirements for apparatus, components, appliances and accessoires.

NF A92-125-2:2006 釉瓷和搪瓷.工业用玻璃垫板设备.第2部分:耐化学腐蚀和热冲击设计和规范

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2 : Designation and specification of resistance to chemical attack and thermal shock.

DIN EN 15159-2:2006 釉瓷和搪瓷.加工厂的玻璃层设备.第2部分:耐化学反应腐蚀和热冲击得设计和规范

This European Standard specifies requirements for the resistance to chemical attack and thermal shock of chemical enamels and their designation for ordering purposes. It is applicable to enamelled apparatus, components and piping components primarily used for process equipment in chemical plants. This European Standard only applies to unalloyed and low-alloy carbon steels suitable for enamelling. NOTE The main criteria for assessing enamel quality are the resistance to chemical attack and thermal shock and the structure of the cover coat enamel.

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock; German version EN 15159-2:2006

NF A92-122:2006 釉瓷和搪瓷.空气与气体、气体与气体热交换器用蓄热、上釉和包装的板材.规范

Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications.

NF A92-124:2006 釉瓷和搪瓷.用于热交换器的钢板上釉层边缘的测定

Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers.

DIN EN 14863:2006 釉瓷和搪瓷.用于热交换器的钢板上边缘釉覆层的测定

The Standard specifies a test method for the determination of the covering of the edge of enamelled steel plate to be used in heat exchangers. It is applicable to plates with a thickness between 0,5 mm and 1,0 mm. This method is not applicable where the current flow generated in the test exceeds 3 A.

Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers; German version EN 14863:2005

KS D ISO 4531-1:2005 釉瓷和搪瓷.食品用搪瓷器皿铅和镉的释放.第1部分:试验方法

이 규격은 음식물(음료 포함)과 접촉하는 법랑 그릇에서 납과 카드뮴의 침출량을 정량하는 모

Vitreous and porcelain enamels-Release of lead and cadmium from enamelled ware in contact with food-Part 1:Method of test

KS D ISO 4531-2:2005 釉瓷和搪瓷.食品用搪瓷器皿铅和镉的释放.第2部分:允许极限值

이 규격은 음식물(음료 포함)과 접촉하는 법랑 그릇에서 납과 카드뮴의 침출량에 대한 허용

Vitreous and porcelain enamels-Release of lead and cadmium from enamelled ware in contact with food-Part 2:Permissible limits

BS EN 14864:2005 釉层和搪瓷.书写表面用适用于钢的搪瓷层.规范

This European Standard specifies the requirements for the functional and aesthetic characteristics of vitreous or porcelain enamel coatings applied to plain steel for use as writing surfaces (whiteboards and chalkboards).

Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification

DIN EN 14864:2005 釉层和搪瓷.书写表面用适用于钢的搪瓷层.规范

The European Standard specifies the requirements for the functional and aesthetic characteristics of vitreous or porcelain enamel coatings applied to plain steel for use as writing surfaces (whiteboards and chalkboards).

Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification; English version of DIN EN 14864

BS EN 14431:2004 釉和搪瓷.用于建筑钢板的瓷釉涂层的特性

This document specifies the requirements for enamel coated, plane, cold rolled, heavy and light gauge steel panels intended for interior and exterior architectural use. It includes the functional and aesthetic characteristics and resistance to graffiti of these panels and the related coatings.

Vitreous and porcelain enamels-Characteristics of the enamel coatings applied to steel panels intended for architecture

NF A92-121:2005 釉和搪瓷.用于建筑钢板的瓷釉涂层的特性

Vitreous and porcelain enamels - Characteristics of enamel coatings to steel panels intended for architecture.

NF A92-120:2005 釉和搪瓷.高压试验

Vitreous and porcelain enamels - High voltage test.

QB/T 2664-2004 搪瓷浴缸

标准规定了搪瓷浴缸的产品分类和标记、要求、试验方法、检验规则和标志、包装、运输、贮存。 标准适用于铸铁搪瓷浴缸和钢板搪瓷浴缸。

Enameled bathtub

BS EN 14483-3:2004 釉瓷和搪瓷.耐化学腐蚀性的测定.用六角容器测定耐碱液化学腐蚀性

This part of EN 14483 describes a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack by alkaline liquids at temperatures between 25 ℃ and 95 ℃. The apparatus used in this section is a hexagonal vessel in which 6 enamelled specimens are simultaneous tested. NOTE 1 The resistance to any alkaline liquid can be tested. However, the test method was original made for the determination of the resistance to hot detergent solutions, within the neutral and alkaline range, used for washing textiles. NOTE 2 Since detergents are continually subject to alterations in their composition, a standard test solution is specified which, in respect to its alkalinity, wetting property and complexing behaviour, can be considered as a typical composition for the detergents at present on the market. The pH value and alkalinity of the standard test solution depend on the proportions of sodium tripolyphosphate, sodium carbonate and sodium perborate present; sodium tripolyphosphate acts simultaneously as a complexing agent. The wetting property of the standard test solution is obtained by the addition of alkylsulphonate. A higher sodium perborate content is not considered necessary since the effect of oxygen on enamel is unimportant, and an increase in the perborate content does not cause any considerable alteration in the alkalinity of the standard test solution. The testing of different enamels using this standard test solution and other test solutions (including 5 % sodium pyrophosphate solution) has justified the use of this standard test solution for determining the resistance of enamels to hot detergent solutions.

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel

BS EN 14483-2:2004 釉瓷和搪瓷.耐化学腐蚀性的测定.耐沸酸、中性液和/或其蒸气的化学腐蚀性的测定

This part of EN 14483 describes a test method for the determination of the resistance of flat surfaces of vitreous and porcelain enamels to boiling acids, neutral liquids, and/or their vapours. This method allows the determination of the resistance of vitreous and porcelain enamels to the liquid and vapour phases of the corrosive medium simultaneously.

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours

BS EN 14483-1:2004 釉瓷和搪瓷.耐化学腐蚀性的测定.室温下耐酸化学腐蚀性的测定

This part of EN 14483 describes a test method for the determination of resistance of vitreous and porcelain enamelled articles to attack by an acid at room temperature, and also specifies a method of classifying results.

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Determination of resistance to chemical corrosion by acids at room temperature