Y71 建筑五金 标准查询与下载

QB/T 4050-2010 淋浴器

本标准规定了淋浴器（淋浴柱）的产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于公称压力不大于1.0MPa，水介质温度不大于90℃条件下，安装在盥洗室(洗手间、浴室)、淋浴房等卫生设施上使用的淋浴器。 本标准不适用于自带加热装置的淋浴器。

Shower panel

DIN 81402:2010 连接铰链及铰链.用螺丝安装接合的家具门

This standard applies to joint hinges and hinges for doors and flaps of furniture on ships.

Joint hinges and hinges - For screwing-on for furniture doors

ANSI/BHMA A156.11-2010 储藏柜锁具

This standard establishes requirements for Cabinet Locks used on doors, drawers and furniture. Cycle tests, operational tests, strength tests and finish tests are included.

Cabinet Locks

ANSI/BHMA A156.23-2010 电磁锁的美国国家标准

This Standard establishes requirements for electromagnetic locks and includes cyclical, dynamic, operational, strength and finish tests. This product is used for access control.

AMERICAN NATIONAL STANDARD FOR ELECTROMAGNETIC LOCKS

ANSI/BHMA A156.36-2010 辅助锁具的美国国家标准

ANSI/BHMA A156.36 establishes requirements for Auxiliary Locks, and includes dimensional criteria and five classifications of tests: operational, cycle, strength, security and, finish . This Standard was formerly part of ANSI/BHMA A156.5 for Auxiliary Locks and Associated Products

AMERICAN NATIONAL STANDARD FOR AUXILARY LOCKS

ANSI/BHMA A156.8-2010 门控制器美国国家标准.顶置门吸和固位装置

This Standard establishes requirements for overhead door stops and holders, and includes performance tests covering operational, cyclical, strength and finish criteria.

AMERICAN NATIONAL STANDARD FOR DOOR CONTROLS - OVERHEAD STOPS AND HOLDERS

DIN SPEC 1104:2009 建筑五金.家庭和公共建筑内儿童,老人和残疾人使用的房门配件.说明符指南,德文版本CEN/TR 15894:2009

Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers; German version CEN/TR 15894:2009

BS PD CEN/TR 15894:2009 建筑五金件.住宅和公共建筑内供儿童、老年人和残疾人使用的门配件.规范制定者指南

This European guidance document provides guidance on the selection of existing building hardware for manually and power operated pedestrian doors and associated products whose integration into the design of buildings will make them more safe, secure and convenient for the occupants inclusive of children, elderly and disabled people to use ("design for all"). Although it is intended for people with reduced physical and sensorial capabilities, it may not cover all specific individual needs. For example, it may not cover all needs of blind people or those not able to move unassisted.

Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers

BS EN 13126-12:2008 建筑五金件 窗和门上窗用要求和试验方法 边悬伸出翻转五金件

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of side hung projecting reversible hardware for windows. NOTE This European Standard is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Side hung projecting reversible hardware

BS EN 13126-10:2008 建筑五金 窗户和门上窗的要求和试验方法 臂平衡设备

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of arm-balancing systems for windows and door height windows.

Building hardware - Requirements and test methods for windows and doors height windows - Arm-balancing systems

BS EN 14846:2008 建筑五金件 锁和插销 电动锁和冲击板要求和试验方法

This European Standard specifies requirements and test methods for strength, security, durability and function of electrical and electronic components for all types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings. Requirements relating to the purely mechanical feature of products included in this European Standard (e.g. resistance to drilling/side load) are covered by EN 12209. This European Standard covers electromechanically operated locks and striking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This document is not applicable to electrically powered hold-open devices (EN 1155), electrically controlled panic exit systems (prEN 13633) or electrically controlled emergency exit systems (prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders (EN 1303), handles (EN 1906), locks for windows, padlocks (EN 12320), locks for safes (EN 1300), furniture locks or prison locks, nor does it apply to cover operating and identification devices (such as mechanical cylinders, intelligent cards, digit codes, magnetic cards). This European Standard does not, for the time being, apply to electromagnetic door locks but these devices will be considered for inclusion in the first revision of this European Standard.

Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods

BS EN 13126-6:2008 建筑五金件 窗户和门上窗的要求及试验方法(带或不带摩擦铰链)可变几何支柱铰链

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system). By means of this European Standard, the user of recognized tested hardware can assume that with correct usage, the variable geometry stay hinges (with or without a friction system) for windows conform to prescribed requirements. NOTE 1 This European Standard is applicable to variable geometry stay hinges (with or without a friction system) whether fitted with integral restrictors or not. NOTE 2 Balancing stay arms/hinges do not represent a friction system. NOTE 3 For the purposes of this European Standard, the friction system is achieved by friction pads or similar.

Building hardware - Requirements and test methods for windows and doors height windows - Variable geometry stay hinges (with or without a friction stay)

BS EN 13126-11:2008 建筑五金件 窗户和门上窗的要求及试验方法 上悬伸出翻转五金

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows. NOTE This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Top hung projecting reversible hardware

BS EN 13126-4:2008 建筑五金件 窗户和门上窗的要求及试验方法 长插销

This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of espagnolettes and their striker plates for use on windows and door height windows. NOTE Espagnolettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90º. This European Standard does not include door bolts within the scope of EN 12051, or multi-point locks with latch and/or dead bolt within the scope of EN 12209.

Building hardware - Requirements and test methods for windows and doors height windows - Espagnolettes

DIN EN 13126-12:2009 建筑五金件 窗和门上窗的要求和试验方法 第12部分:边悬伸出翻转五金件

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of side hung projecting reversible hardware for windows. NOTE This European Standard is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware; German version EN 13126-12:2008

DIN EN 13126-6:2009 建筑五金件.窗户和门上窗的要求和试验方法.第6部分:可变几何支柱铰链(有或无摩擦离合器支柱)

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system). By means of this European Standard, the user of recognized tested hardware can assume that with correct usage, the variable geometry stay hinges (with or without a friction system) for windows conform to prescribed requirements. NOTE 1 This European Standard is applicable to variable geometry stay hinges (with or without a friction system) whether fitted with integral restrictors or not. NOTE 2 Balancing stay arms/hinges do not represent a friction system. NOTE 3 For the purposes of this European Standard, the friction system is achieved by friction pads or similar.

Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay); English version of DIN EN 13126-6:2009-02

DIN EN 13126-10:2009 建筑五金件.窗和门上窗用要求和试验方法.第10部分:臂平衡设备

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of arm-balancing systems for windows and door height windows.

Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems; English version of DIN EN 13126-10:2009-02

DIN EN 13126-11:2009 建筑五金件.窗和门上窗的要求和试验方法.第11部分:上悬伸出翻转五金

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows. NOTE This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware; English version of DIN EN 13126-11:2009-02

NF P26-330-6:2009 建筑五金件.窗和门上窗的要求和试验方法.第6部分:可变几何支柱铰链(有或无摩擦离合器支柱)

Building hardware - Requirements and test methods for windows and doors height windows - Part 6 : variable geometry stay hinges (with or without a friction stay).

DIN EN 13126-4:2009 建筑五金件.窗和门上窗用要求和试验方法.第4部分:长插销

This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of espagnolettes and their striker plates for use on windows and door height windows. NOTE Espagnotettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90~. This European Standard does not include door bolts within the scope of EN 12051, or multi-point locks with latch and/or dead bolt within the scope of EN 12209.

Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes; German version EN 13126-4:2008