Y71 建筑五金 标准查询与下载

ANSI/BHMA A156.15-2015 释放装置.电磁和机电闭门手持器

RELEASE DEVICES �C CLOSER HOLDER@ ELECTROMAGNETIC AND ELECTROMECHANICAL

DIN EN 13126-5:2015 建筑五金件. 窗和落地窗用五金件. 要求和试验方法. 第5部分: 开窗和落地窗的限制设备; 德文版本EN 13126-5-2011+A1-2014

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows; German version EN 13126-5:2011+A1:2014

DIN 81405:2015 门钩和门钩环

Door hooks and corresponding eye

QB/T 1199-2014 浮球阀

本标准规定了浮球阀的结构型式、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于工作温度小于80 ℃、工作介质为水的公称压力不大于PN6的内、外螺纹连接浮球阀(公称尺寸DN不大于100mm)和法兰连接浮球阀(公称尺寸DN:>100mm~300mm)。

Float valve

QB/T 4718-2014 水暖管道设施用快速连接件

本标准规定了水暖管道设施用快速连接件(以下简称管件)的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于公称压力PN不大于1.0 MPa、工作温度不超过40℃的建筑PE水暖管道系统及公称压力PN不大于1.0 MPa、工作温度不超过90 ℃的建筑PE-X或PE-RT水暖管道系统上的连接件。

Fast-connection coupling for plumbing piping system

QB/T 4769-2014 无障碍开门喷水按摩浴缸

本标准规定了无障碍开门喷水按摩浴缸的术语和定义、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。本标准适用于由浴缸、水泵和/或气泵、喷嘴、排水配件组装的无障碍开门喷水按摩浴缸(以下简称“开门缸”),也适用于无按摩功能的开门缸。

Walk-in whirlpool bathtub

DIN 81404:2014 门钩用悬置夹持装置

Suspension catch for door hooks

ASTM B779-14 钢芯加强线状致密同芯绞捻铝导线的标准规格(ACSR/TW)

1.1 This specification covers shaped wire compact concentric-lay-stranded aluminum conductor, steel-reinforced (ACSR/TW) and its component wires for use as overhead electrical conductors (Explanatory Note 1 and Note 2). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.Note 1—ACSR/TW is designed to increase the aluminum area for a given diameter of conductor by the use of trapezoidally shaped wires (TW). The conductors consist of a central core of round steel wire(s) surrounded by two or more layers of trapezoidal aluminum 1350-H19 wires. Different strandings of the same size of conductor are identified by type, which is the approximate ratio of steel area to aluminum area expressed in percent (Table 1, Table 2 and Table 3). For the purpose of this specification, the sizes listed in Table 1 and Table 2 are tabulated on the basis of the finished conductor having an area or outside diameter equal to that of specific sizes of standard ACSR so as to facilitate conductor selection.Note 2—The aluminum and temper designations conform to ANSI Standard H8201;35.1. Aluminum 1350 corresponds to Unified Numbering System (UNS) A91350 in accordance with Practice E527.

Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced 40;ACSR/TW41;

ASTM F626-14 栅栏配件的标准规范

1.1 This specification covers the materials, coating requirements, and inspection of fence accessories for chain-link fence for the following: 1.1.1 Post and line caps, 1.1.2 Rail and brace ends, 1.1.3 Top rail sleeves, 1.1.4 Tie wires, clips, and fasteners, 1.1.5 Tension and brace bands, 1.1.6 Tension bars, 1.1.7 Truss rod assembly, 1.1.8 Barbed wire arms, 1.1.9 Color coating of fittings, and 1.1.10 Fitting size terminology. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Fence Fittings

ASTM A933/A933M-14 加固用乙烯基(PVC)镀层钢丝和焊接钢丝网的标准规格

1.1 This specification covers plain and deformed steel wire and plain and deformed steel welded wire reinforcement with protective vinyl (polyvinyl chloride, or polyvinyl chloride powder compound) coating. A Class A minimum coating thickness is required for wire and welded wire reinforcement intended for use in concrete and masonry. A Class B minimum coating thickness is required for wire and welded wire reinforcement intended for use in mechanically stabilized earth applications. 1.2 Other thermoplastic organic coatings may be used provided they meet the requirements of this specification. Note 1—The coating applicator is identified throughout this specification as the manufacturer. 1.3 Requirements for coatings are contained in Annex A1. 1.4 Requirements for patching materials are contained in Annex A2. 1.5 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables or figures, do not contain any mandatory requirements. 1.6 This specification is applicable for orders in either inch-pound units (as Specification A933) or in SI units [as Specification A933M]. 1.7 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

BS EN 10223-3:2013 栅栏和结网用钢丝和钢丝制品. 土木工程用六角钢丝网产品

Steel wire and wire products for fencing and netting. Hexagonal steel wire mesh products for civil engineering purposes

QB/T 4595.1-2013 合页 第1部分:普通型合页

QB/T 4595的本部分规定了普通型合页的要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于厚度不小于2.5 mm、供各类建筑门窗及橱柜门转动连接用的矩形合页。

Hinge.Part 1: General type

QB/T 2032-2013 钢插销

本标准规定了钢插销的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于供各类建筑门窗及橱柜门定位和锁闭用的金属插销。

Metal flush bolt

QB/T 4595.4-2013 合页 第4部分:H型合页

QB/T4595.1中的该章,用下述内容代替。本部分规定了H型合页的要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于需要经常脱卸而较薄的门窗所使用的两页片成“H”型的合页。

Hinge.Part 4:H type

QB/T 4595.2-2013 合页 第2部分:轻型合页

QB/T 4595.1中的该章,用下述内容代替:本部分规定了厚度小于2.5 mm的矩形合页的要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于轻便门窗及橱柜类所使用的合页。

Hinge.Part 2: Light type

QB/T 4595.5-2013 合页 第5部分:T型合页

QB/T4595.1中的该章,用下述内容代替:本部分规定了T型合页的要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于建筑门窗和家具类门使用的两页片成“T”形的合页。

Hinge.Part 5: T type

QB/T 4595.6-2013 合页 第6部分:双袖型合页

QB/T 4595.1中的该章,用下述内容代替:本部分规定了双袖型合页的要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于需要经常脱卸的门窗的分左右使用的双袖型合页。

Hinge.Part 6: Lift-off type

QB/T 4596-2013 门吸和门扣

本标准规定了门吸和门扣的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于供门扇定位用的各类门吸及锁闭门扇用的各类门扣,不适用于电磁阀控制的门吸。

Door stop and door guard

QB/T 4595.3-2013 合页 第3部分:抽芯型合页

QB/T 4595.1中的该章用下述内容代替:本部分规定了抽芯型合页的要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于需要经常拆卸的门窗的,芯轴可抽离的合页。

Hinge.Part 3: Loose pin type

QB/T 2698-2013 闭门器

本标准规定了闭门器的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于安装在平开门上部、用于单向开门的各种关门或开门装置。

Door closer