Y71 建筑五金 标准查询与下载

ANSI/BHMA A156.22-2012 门垫片和封边系统

Establishes requirements for the performance and installation of gasketing systems including intumescents applied to, or mortised to doors or frames, or both. Included are performance tests intended to evaluate resistance to smoke and air infiltration, energy performance, acoustic properties, and the life and durability of gasketing materials.

Door Gasketing and Edge Seal Systems

ANSI/BHMA A156.13-2012 插锁和插销

This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.

Mortise Locks and Latches

ANSI/UL 305a-2012 太平门五金件安全性标准

Standard for Safety for Panic Hardware

ASTM F1043-12 钢铁工业栅栏框架强度和保护涂层的标准规范

1.1 This specification covers the strength and protective coating requirements for industrial steel fence framework. The intended use is for all types of fence, including but not limited to, chain link, expanded metal, wire mesh both welded and woven, PVC and wood. Consult fencing product manufacturer for post spacing requirements. Post spacings for chain link fence are not to exceed 10 ft. (For additional information, see CLFMI Guide WLG2445.) 1.1.1 Caution Regarding Windload???If additives to the fence, such as windscreen, inserts, or signage are required, it is advisable to use stronger framework and fittings, to reduce the on-center spacing of posts, or to add back bracing. Factors to consider when determining windload include the type of screening material to be used, area of fence to be covered and local wind conditions. 1.2 Posts and rails may have any cross-sectional shape meeting the requirements herein. The shapes may be formed and welded, cold formed, hot rolled, or extruded. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

ASTM F1267-12 网状钢金属材料的标准规范

1.1 This specification covers expanded metal. 1.1.1 Expanded metal covered by this specification is intended for a variety of applications. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only and may be approximate. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 11, of this specification. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Metal, Expanded, Steel

BS EN 13126-3:2011 建筑五金.窗和落地窗用建筑五金.要求和试验方法.倾斜和旋转,先倾斜和只旋转的五金手柄

Building hardware. Hardware for windows and door-height windows. Requirements and test methods. Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware

BS EN 13126-1:2011 建筑五金.窗和落地窗用建筑五金.要求和试验方法.所有类型五金的通用要求

Building hardware. Hardware for windows and door height windows. Requirements and test methods. Requirements common to all types of hardware

BS EN 13126-5:2011 建筑五金.窗和落地窗用建筑五金.要求和试验方法.开窗限制设备

Building hardware. Hardware for windows and door height windows. Requirements and test methods. Devices that restrict the opening of windows and door height windows

NF P26-330-2:2011 建筑五金.窗户和门上窗的要求和试验方法.第2部分:窗紧固把手

Building hardware - Requirements and test methods for windows and doors height windows - Part 2 : window fastener handles.

DIN EN 13126-2:2011 建筑五金.门窗高度窗要求及试验方法.第2部分:窗撑柄.德文版 EN 13126-2-2011

This European Standard specifies requirements and test methods for durability, strength, security and functionality of window fastener handles.

Building hardware - Requirements and test methods for windows and door height windows - Part 2: Window fastener handles; German version EN 13126-2:2011

BS EN 13126-2:2011 建材硬件.窗户和门高度的要求和试验方法.窗户紧固件手柄

Building hardware. Requirements and test methods for windows and doors height windows. Window fastener handles

DIN EN 13126-19:2011 建筑五金.窗户和门上窗的要求和试验方法.第19部分:滑动式闭合装置;德文版本EN 13126-19-2011

This part of EN 13126 specifies requirements and test procedures for durability, strength, security and functionality of Sliding Closing Devices (SCD) for windows and door height windows.

Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices; German version EN 13126-19:2011

BS EN 13126-19:2011 建筑五金 窗户和门上窗的要求和试验方法 推拉关闭装置

Building hardware. Requirements and test methods for windows and door height windows. Sliding closing devices

ANSI/BHMA A156.15-2011 释放装置.电磁和机电闭门手持器

Establishes requirements for door closers combined with hold-open devices or free-swinging door closers combined with releasing devices and includes performance tests covering operational, cyclical, and finish criteria.

Release Devices - Closer Holder, Electromagenetic and Electromechanical

JG/T 290-2010 建筑疏散用门开门推杠装置

本标准规定了建筑疏散用门开门推杠装置的术语和定义、分类、代号和标记、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于-10℃～60℃环境下的建筑疏散用门开门推杠装置，其他疏散用门开门推杠装置可参考使用。

Panic devices operated by a horizontal bar for building exit doors

BS EN 1906:2010 建筑五金器具.杠杆式把手和圆形把手家具.要求和试验方法

This European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles, knobs for doors, push pads and similar in combination with backplates or roses operating latches. This document is applicable only to lever handles and knobs that operate a latch or a lock and other devices. It specifies four categories of use according to frequency and other conditions of use.

Building hardware - Lever handles and knob furniture - Requirements and test methods

QB/T 4051-2010 太阳能热水器用温控混合阀

本标准规定了太阳能热水器用温控混合阀的术语和定义、分类和标记、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于公称压力不大于0.5MPa条件下使用, 安装在太阳能热水器设施上, 出水温度自动受预选温度控制的温控阀。 本标准也适用于安装在储水式燃气热水器、电热水器等设施上, 能配套使用的温控阀。

Thermostatic mixing valves for solar water heater

QB/T 4000-2010 感应温控水嘴

本标准规定了感应温控水嘴的术语和定义、分类和标记、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于公称压力不大于0.5MPa，热水温度不大于85℃的条件下使用，安装在盥洗室（洗手间、浴室等）、厨房、医院、宾馆等卫生设施上，采用感应开关控制，以电动阀控制通断，出水口温度自动受预选温度控制的感应温控水嘴。

Sensor automatic thermostatic faucets

QB/T 4001-2010 桑那房

本标准规定了桑那房的术语和定义、分类、要求、试验方法、检验规则和标志、使用说明书、包装、运输、贮存。 本标准适用于由桑那加热器、干蒸房体、蒸汽发生器、淋浴房体、喷淋器等配件组成，并带有电器控制装置的干湿蒸桑那房。 本标准也适用于由桑那加热器、干蒸房体、淋浴房体、喷淋器等组成的干蒸淋浴房。 本标准一般没考虑： 无人照看的幼儿和体弱者使用； 幼儿拿器具玩耍的情况。 本标准不适用于： 准备用在特殊场所的器具，如存在腐蚀性和爆炸性气体（灰尘、蒸汽或煤气）的地方； 打算仅引起人体的一部分出汗的器具； 使用者的头部保持在加热区外的发汗浴器； 帐篷及其他可折叠式桑那浴器。

Sauna rooms

QB/T 4050-2010 淋浴器

本标准规定了淋浴器（淋浴柱）的产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于公称压力不大于1.0MPa，水介质温度不大于90℃条件下，安装在盥洗室(洗手间、浴室)、淋浴房等卫生设施上使用的淋浴器。 本标准不适用于自带加热装置的淋浴器。

Shower panel