共找到 276 条与 日用五金制品 相关的标准,共 19 页
本标准规定了金属拉链的产品分类、要求、试验方法、检验规则和标志包装、运输、贮存。 本标准适用于金属拉链(以下简称“拉链”)。
metal zipper
本标准规定了尼龙拉链的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于尼龙拉链(以下简称“拉链”)。
nylon zipper
本标准规定了注塑拉链的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于注塑拉链(以下简称“拉链”)。
Injection zipper
本标准规定了喷火灯的定义、分类与命名、技术要求、试验方法、检验规则和标志、标签、使用说明书、包装、运输、贮存等要求。 本标准适用于以煤油、车用汽油、轻柴油为燃料的,用于钢铁、机械制造、工矿电讯的有色金属加温、焊接、烘铲油漆、冬季发动机加温(非燃料部分)、防水材料施工、肉食品去毛加工和水暖管路的烘烤等范围的喷火灯(简称“喷灯”)。 本标准不适用于以液化石油气等为燃料的喷灯。
torch
1.1 These requirements cover key locks categorized as follows and defined in Glossary, Section 3: a) Cabinet locking cylinders, b) Door locks, c) Locking cylinders, d) Security container key locks, Type 1 and Type 2, and e) Two-key locks. 1.2 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.
UL Standard for Safety for Key Locks
本标准规定了外装门锁的定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于外装门锁。 本标准不适用于防盗安全门锁。
Exterior door lock
本标准规定了弹子插芯门锁的分类、要求、试验方法、检验规则和标志包装、运输、贮存。 本标准适用于安装在各种平开和推拉门上的弹子插芯门锁。 本标准不适用于防盗安全门锁。
Pin mortise lock
本标准规定了球形门锁(以下简称“球锁”)的分类与命名、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于安装在木门、钢门、铝合金门及塑料门上使用的球形门锁。 本标准不适用于防盗安全门锁。
Ball lock
本标准规定了叶片插芯门锁的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于安装在各种平开门上的叶片插芯门锁。 本标准不适用于防盗安全门锁。
Blade mortise lock
This European Standard defines terms and symbols relating to castors and wheels. NOTE 1 Castors and wheels is the English expression; in other languages the expression may be reversed e.g. in French "Roues et roulettes" and in German "Rader und Rollen". NOTE 2 In addition to terms used in the three official CEN languages (English, French and German), this European Standard gives the equivalent terms in the Dutch, Finnish, Italian and Swedish languages; these are published under the responsibility of the national Committee/member body for Holland, Finland, Italy and Sweden. However, only the terms and definitions given in the official languages can be considered as EN terms and definitions.
Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary
This European Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to swivel castors for hospital beds with a wheel diameter of 100 mm or more, which have a central locking device. Swivel castors may be used with the main principal dimensions.
Castors and wheels - Hospital bed castors
This European Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to castors and wheels which may include braking and/or locking devices, specifically for manually propelled use in an institutional environment This includes for example, shops, restaurants, hotels, educational buildings and hospitals.
Castors and wheels - Castors and wheels for manually propelled institutional applications
This European Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to castors with or without braking devices that will normally be used on swivel chairs.
Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements
This European Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European Standard applies to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications.
Castors and wheels - Castors for furniture - Requirements
This European Standard specifies the test methods and apparatus to be used to check the performance of the castors and wheels. The test to be used and the acceptance criteria, values and applicability relevant to each type of castor and wheel are covered by the specific standards.
Castors and wheels - Test methods and apparatus
This Commercial Item Description (CID) covers industrial medium duty rigid or swivel casters suitable for nonpowered material transport equipment.
CASTER, INDUSTRIAL, MEDIUM DUTY
This Commercial Item Description (CID) covers industrial heavy duty rigid or swivel casters suitable for nonpowered material transport equipment.
CASTER, INDUSTRIAL, HEAVY DUTY
Plastic slide fasteners - Design types, dimensions, materials
The document specifies definitions for slide fasteners.
Slide fasteners - Concepts
The document contains the labelling for consumers for metallic and plastic slide fasteners.
Slide fasteners - Part 2: Labelling for consumers
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号