共找到 276 条与 日用五金制品 相关的标准,共 19 页
This British Standard specifies performance requirements and test methods for thief resistant mechanically operated single-point lock assemblies (including locking plates, fixing screws, fitting instructions and cylinders where appropriate) that: a) incorporate locks conforming to BS EN 12209 field of door application grades K. L. M. N. R. S and T. i.e. locks that can be locked from both sides with a key thereby only allowing key egress: and b) are used in doors, window doors and entrance doors in buildings. This standard does not cover thief resistant lock assemblies that provide keyless egress, i.e. lock assemblies that can always be unlocked from the inside without the need for a key. NOTE 1 Thief resistant lock assemblies that provide keyless egress are specified in a separate standard. BS 8621. because they are sufficiently different in terms of what they offer for means of escape (from fire) and security. NOTE 2 It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance with 7.2.
Thief resistant lock assembly - Key egress
이 규격은 가스가 주입된 액상 제품을 담은 캔(1)을 제외하고, ISO 1361에서 지름이
Light-gauge metal containers-Round open-top cans-Cans defined by their nominal gross lidded capacities
이 규격은 가스를 주입하고 액상 제품을 담는 둥근 오픈탑 캔의 공칭 충전 용적 및 관련 지
Light-gauge metal containers-Round open-top cans-Cans for liquid products with added gas, defined by their nominal filling volumes
이 규격은 손톱깎이에 대하여 규정한다. 다만 애완 동물용은 제외한다.
Nail scissor
This specification covers pedestrian door deadbolts (PDD’s) for use with changeable combination locks and strikes. Pedestrian door deadbolts include designs that meet the Americans with Disabilities Act (ADA) and Uniform Federal Accessibility Standards ~UFAS).
LOCK EXTENSION (PEDESTRIAN DOOR, DEADBOLT)
1.1 This specification covers functional, operational, and security requirements for padlocks. Included are function descriptions, operational tests, forcing tests, and surreptitious entry tests.1.2 This specification describes and grades various levels of performance to provide users of the specification with criteria upon which to select suitable padlocks. 1.3 Tests described are laboratory tests, and although they simulate field conditions as to attacks, they do not duplicate these conditions. Tests described are repeatable in the laboratory.1.4 Some users of this specification may wish to use padlocks that have special attributes not related to security.1.5 This specification describes and grades various levels of performance provided by limited dual custody operation. 1.6 The specific padlocks included have shackles of limited diameter, permitting attachment to existing zipper slides and zipper pulls and other devices provided for closure.1.7 These padlocks are considered "privacy padlocks" offering limited protection to forced attack similar to that provided by tamper-indicative security seals. A successful forced attack would be indicated by the damage done to the padlock. For padlocks offering greater protection to forced attack, the user is directed to Performance Specification F 883.1.8 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only.The following precautionary caveat pertains only to the test method portions, Sections , of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Performance Specification for Privacy Padlocks
1.1 This specification covers environmental, functional, operational, and security requirements for padlocks. Included are function descriptions, cycle tests, operational tests, environmental tests, forcing tests, and surreptitious entry tests. No effort has been made to include criteria for specially made padlocks used by the Department of Defense or others in highly sensitive locations.1.2 This specification describes and grades various levels of performance to provide users of the specification with criteria upon which to select suitable padlocks.1.3 Tests described are laboratory tests and although they simulate field conditions as to attacks or the environment, they do not duplicate these conditions. Tests described are repeatable in the laboratory.1.4 Some users of this specification may wish to use padlocks that have special attributes not related to security. These are found in 4.3.1.5 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only.1.6 The following precautionary caveat pertains only to the test method portions, Sections 8-11, of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Performance Specification for Padlocks
1.1 This specification covers functional, operational, and security requirements for padlocks. Included are function descriptions, operational tests, forcing tests, and surreptitious entry tests. 1.2 This specification describes and grades various levels of performance to provide users of the specification with criteria upon which to select suitable padlocks. 1.3 Tests described are laboratory tests, and although they simulate field conditions as to attacks, they do not duplicate these conditions. Tests described are repeatable in the laboratory. 1.4 Some users of this specification may wish to use padlocks that have special attributes not related to security. 1.5 This specification describes and grades various levels of performance provided by limited dual custody operation. 1.6 The specific padlocks included have shackles of limited diameter, permitting attachment to existing zipper slides and zipper pulls and other devices provided for closure. 1.7 These padlocks are considered “privacy padlocks” offering limited protection to forced attack similar to that provided by tamper-indicative security seals. A successful forced attack would be indicated by the damage done to the padlock. For padlocks offering greater protection to forced attack, the user is directed to Performance Specification F883. 1.8 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.9 The following precautionary caveat pertains only to the test method portions, Sections 8-11, of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Performance Specification for Privacy Padlocks
이 규격은 손바느질용 바늘(이하 “바늘”이라 한다.)에 대하여 규정한다.
Hand sewing needles
Building hardware - Controlled door closing devices - Fixing dimensions and installation
本标准规定了锁匙挂件的结构、要求、试验方法、检验规则及标志、包装。 本标准适用于串挂锁只钥匙的各类挂件。
Key holder
A-A-55619B, dated 29 May 1998, has been reviewed and determined to be valid for use in acquisition
CASTER, INDUSTRIAL, HEAVY DUTY
A-A-55617B, dated 29 May 1998, has been reviewed and determined to be valid for use in acquisition
CASTER, INDUSTRIAL, MEDIUM DUTY
이 규격은 칼날의 수가 4개 이하로서 접어서 휴대하는 휴대용 칼(이하 칼이라 한다.)에
Pocket knives
This Commercial Item Description (CID) covers industrial heavy duty kingpinless swivel casters for nonpowered material transport and maintenance equipment with towing application for no more than five (5) miles per hour (mph).
CASTER, SWIVEL, KINGPINLESS INDUSTRIAL, HEAVY DUTY WITH TOWING APPLICATION
1.1 This specification establishes standard dimensions for zippers of all materials for specified size designation; for equivalency, in inch-pound and metric units, of zipper length and length tolerances, of tape width and width tolerances, and of tape end lengths. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Zipper Dimensions
Fittings for furniture - Furniture locks - General characteristics.
This draft standard applies to multiple locks with catch and bolt including multiple locks with selflocking device. These multiple locks can habe a locking device with levers or cylinders. The document is an additional standard to DIN EN 12209 as the European standards do not devine measurements. It does not contain requirements which would be in contrast to EN 12209.
Locks - Mortise locks - Part 3: Mortise locks as multipoint locks
This standard defines definitions, measurements, requirements, tests and marking for mortice locks with latch and/or lock including mortice locks with selflocking device, which are suitable for tube frame doors. This standard only deals with mortice locks for profile cylinders.
Locks - Mortise locks - Part 2: Mortise locks for tube frame doors
The document describes mortice locks with catch and bolt. The mortice locks can have a locking devices with bulleted key, levers or cylinders. The document is an additional standard to EN 12209, as the European standard does not define measurements. It does not contain requirements which would be in contrary to EN 12208.
Locks - Mortice locks - Part 1: Mortice locks for rebated doors
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号