Y73 日用五金制品 标准查询与下载

BS 8621:2007 防盗锁组件.无钥匙出口

This British Standard specifies performance requirements and test methods for a thief resistant mechanically operated single-point lock assembly (including locking plates, fixing screws, fitting instructions, cylinders and protective furniture where appropriate) that: a) incorporates a lock conforming to BS EN 12209 field of door application grades A, B, C, D, E, F or J, i.e. a lock that can always be unlocked from the inside without a key thereby only allowing keyless egress; and b) is used in doors, window doors and entrance doors in buildings. This standard does not cover thief resistant lock assemblies that only allow egress using a removable key, or lock assemblies that provide a secure (no egress) mode in addition to keyless egress. NOTE 1 Thief resistant lock assemblies that only allow egress using a key or assemblies that provide a secure (no egress) mode in addition to keyless egress are specified in separate standards, BS 3621 and BS 10621 (respectively), because they are sufficiently different in terms of what they offer for means of escape (from fire) and security. NOTE 2 It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance with 9.2. NOTE 3 A lock or latch assembly conforming to this standard can be included as part of an exit device that conforms to BS EN 179 or BS EN 1125.

Thief resistant lock assembly - Keyless egress

BS 3621:2007 防盗锁组件.钥匙孔

This British Standard specifies performance requirements and test methods for a thief resistant mechanically operated single-point lock assembly (including locking plates, fixing screws, fitting instructions, cylinders and protective furniture where appropriate) that: a) incorporates a lock conforming to BS EN 12209 field of door application grades K, L, M, N, R, S or T, i.e. a lock that can be locked from both sides with a key thereby only allowing key egress; and b) is used in doors, window doors and entrance doors in buildings. This standard does not cover thief resistant lock assemblies that provide keyless egress, i.e. lock assemblies that can always be unlocked from the inside without the need for a key, or lock assemblies that provide a secure (no egress) mode in addition to keyless egress. NOTE 1 Thief resistant lock assemblies that provide keyless egress or assemblies that provide a secure (no egress) mode in addition to keyless egress are specified in separate standards, BS 8621 and BS 10621 (respectively), because they are sufficiently different in terms of what they offer for means of escape (from fire) and security. NOTE 2 It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance with 9.2.

Thief resistant lock assembly – Key egress

BS 3621:2007+A2:2012 防盗锁组件.钥匙孔

Thief resistant lock assembly. Key egress

BS 3621:2007+A1:2009 防盗锁组件.钥匙孔

This British Standard specifies performance requirements and test methods for a thief resistant mechanically operated single-point lock assembly (including locking plates, fixing screws, fitting instructions, cylinders and protective furniture where appropriate) that: a) incorporates a lock conforming to BS EN 12209 field of door application grades K, L, M, N, R, S or T, i.e. a lock that can be locked from both sides with a key thereby only allowing key egress; and b) is used in doors, window doors and entrance doors in buildings. This standard does not cover thief resistant lock assemblies that provide keyless egress, i.e. lock assemblies that can always be unlocked from the inside without the need for a key, or lock assemblies that provide a secure (no egress) mode in addition to keyless egress. NOTE 1 Thief resistant lock assemblies that provide keyless egress or assemblies that provide a secure (no egress) mode in addition to keyless egress are specified in separate standards, BS 8621 and BS 10621 (respectively), because they are sufficiently different in terms of what they offer for means of escape (from fire) and security. NOTE 2 It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance wit.h 9.2.

Thief resistant lock assembly - Key egress

NF P26-432:2007 建筑五金 锁 安全锁

Quincaillerie pour le bâtiment - Serrures - Verrous de sûreté

SANS 1823:2007 粘附锁紧件

Specifies requirements for touch and close fasteners.

Touch and close fasteners

BS PD CEN/TR 15588:2007 家具用五金件.铰链及其部件的术语

This Technical Report specifies terms for all types of hinges and their components for all fields of application. With the aid of figures it establishes different types, with the aim of facilitating understanding the technical language.

Hardware for furniture. Terms for hinges and their components

SN/T 1860-2007 进出口日用不锈钢真空保温容器检验规程

本标准规定了日用不锈钢真空保温容器的抽样、检验、检验结果的判定及不合格处置。 本标准适用于采用镍铬系列不锈钢材料制做的，具有保暖、贮冷、焖烧等多种功能的，且用于存放冷热饮料及食物的日用真空保温瓶、杯、壶、罐等容器。

Rules for the inspection of stainless steel vacuum containers of daily use for import and export

UL 437 BULLETIN-2007 UL安全标准.钥匙锁装置

The requirements cover key locks categorized as follows: Cabinet locking cylinders; Door locks; Locking cylinders; Security container key locks, Type 1 and Type 2; and Two-key locks.

UL Standard for Safety for Key Locks

KS G 4500-2006 耐火金库

이 규격은 화재를 예상한 고온 분위기 속에서 금고 안쪽을 소정 온도 및 습도를 유지하는 내

Fire-resistive containers

DIN 18252:2006 门锁圆形钢柱形锁芯.术语、尺寸、要求和标记

The document defines the terminology, dimensions, requirements and markings for profile cylinders for locks in buildings.

Profile cylinders for door locks - Terminology, dimensions, requirements and marking

QB/T 1001-2006 自行车锁

bicycle lock

DIN 81316:2006 船用门锁的钥匙面板和把手

Face-plates for door-handles and keys depending on this standard are for doors according to DIN 81300-1 on ships.

Backplates for keys and door-handles for door looks used on ships

BS 3084:2006 拉链.规范

This British Standard specifies performance levels and test methods for the following characteristics of slide fasteners made from interlocking components mounted on textile tapes: strengths of puller attachment, closed-end, top stop, open-end fastener box, reciprocating mechanism, closed fastener when extended laterally, open-end attachment when extended laterally, slider lock, and open-end fastener single stringer slider retention. NOTE The tests specified in Annexes B to J have been specifically devised to permit their direct application to finished fasteners with a view to giving the user reasonable assurance that a fastener conforming to the requirements of this British Standard can satisfactorily fulfil its intended purpose. Annex K gives information about sampling procedures for bulk quantities of fasteners. In addition, performance levels are also specified for colour fastness to washing, dry cleaning and water, and for dimensional stability to washing and dry cleaning. This British Standard is applicable to slide fasteners for general use and is not applicable to slide fasteners for aeronautical or other specialist purposes (slide fasteners for aeronautical purposes are covered by BS 3F 121).

Slide fasteners (Zips) - Specification

BS PD CEN/TR 15349:2006 家具用五金件.延伸件及其部件用术语

This European Technical Report specifies terms for all types of extension elements and their components for all fields of application, except table extensions. With the aid of figures it establishes different types, with the aim of facilitating understanding the technical language.

Hardware for furniture — Terms for extension elements and their components

UL 768-2006 暗码锁

These requirements cover combination locks intended for attachment on doors of safes, chests, vaults, and the like, to provide a means of locking the boltwork against unauthorized opening. These requirements are intended to test the ability of combination locks to resist unauthorized opening of the combination locks by sense of sight, touch, or hearing. Combination locks covered by these requirements may or may not have integral protection against entry by force.

UL Standard for Safety Combination Locks Eighth Edition; Reprint with revisions through and including March 9, 2007

SANS 1533:2005 挂锁

Specifies the characteristics of various types and categories of padlocks.

Padlocks

UL 437 BULLETINS-2005 钥匙锁/注:批准

The requirements cover key locks categorized as follows: Cabinet locking cylinders; Door locks; Locking cylinders; Security container key locks, Type 1 and Type 2; and Two-key locks.

Key Locks / Note: Approved

KS D ISO TR 10194:2004 一般用途的非圆形薄壁金属容器.公称灌装容量和公称横截面积

이 규격은 둥글지 않은 일반용 라이트 게이지 금속 용기에 관한 공칭 충전 용적 및 이와 관

Non-round general use light gauge metal containers-Nominal filling volumes and nominal cross-sections

BS 8621:2004 防盗锁组件.无钥匙出口

This British Standard specifies performance requirements and test methods for thief resistant mechanically operated single-point lock assemblies (including locking plates, fixing screws, fitting instructions and cylinders where appropriate) that: a) incorporate locks conforming to BS EN 12209 field of door application grades A, B, C, D, E, F and J, i.e. locks that can always be unlocked from the inside without a key thereby only allowing keyless egress; and b) are used in doors, window doors and entrance doors in buildings. This standard does not cover thief resistant lock assemblies that only allow egress using a removable key. NOTE 1 Thief resistant lock assemblies that only allow egress using a key are specified in a separate standard, BS 3621, because they are sufficiently different in terms of what they offer for means of escape (from fire) and security. NOTE 2 It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance with 7.2. NOTE 3 A lock or latch assembly conforming to this standard can be included as part of an exit device that conforms to BS EN 179 or BS EN 1125.

Thief resistant lock assembly - Keyless egress