TM-650 2.5.5.3C-1987

Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method)

TM-650 2.5.5.3C-1987 发布历史

"Purpose: This method is suitable for determining the volume permittivity@ (dielectric constant) and loss tangent (dissipation factor) of insulating materials at 1 MHz. It is not dependent on either direct or indirect measurement of specimen thickness and therefore is very useful for thin films and laminates but may also be used on specimens up to approximately 6.35 mm [0.25""] thick. It is useful for all ranges of permittivity and for loss tangent as low as 0.0005 providing the range and accuracy of the bridge used are adequate. Description of Method: The two fluid method utilizes air as one fluid and a suitable liquid@ normally Dow 200 1.0CS silicon fluid@ as the second. Using an established value for the permittivity of air@ the values for the permittivity of the fluid and the sample may easily be calculated. The cell spacing is fixed during all readings but does not need to be known accurately for the series of readings required. Since specimens do not require any electrodes to be applied and since many specimens can be measured at one time without changing any spacings or machine settings@ the method is not only very accurate but very rapid. The method has been used for measurement of PTFE and epoxy glass laminates and flexible films@ e.g. polyimide. Reproducibility lab to lab is excellent for permittivity provided minimal precautions are observed and bridge accuracy is appropriate. On most materials@ the effects of small changes in moisture or temperature are larger than any error due to the method. Lab to lab correlation on stable material such as PTFE have shown results to be consistently within 0.005 or (0.2%)."

TM-650 2.5.5.3C-1987由IPC - Association Connecting Electronics Industries 发布于 1987-12-01，并于 2015-12-31 实施。

TM-650 2.5.5.3C-1987的历代版本如下：

• 1987年12月01日 TM-650 2.5.5.3C-1987

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 TM-650 2.5.5.3C-1987 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

TM-650 2.5.5.3C-1987

发布日期

1987年12月01日

实施日期

2015年12月31日

废止日期

无

中国标准分类号

/

国际标准分类号

/

发布单位

IPC - Association Connecting Electronics Industries

引用标准

4

适用范围

"Purpose: This method is suitable for determining the volume permittivity@ (dielectric constant) and loss tangent (dissipation factor) of insulating materials at 1 MHz. It is not dependent on either direct or indirect measurement of specimen thickness and therefore is very useful for thin films and laminates but may also be used on specimens up to approximately 6.35 mm [0.25""] thick. It is useful for all ranges of permittivity and for loss tangent as low as 0.0005 providing the range and accuracy of the bridge used are adequate. Description of Method: The two fluid method utilizes air as one fluid and a suitable liquid@ normally Dow 200 1.0CS silicon fluid@ as the second. Using an established value for the permittivity of air@ the values for the permittivity of the fluid and the sample may easily be calculated. The cell spacing is fixed during all readings but does not need to be known accurately for the series of readings required. Since specimens do not require any electrodes to be applied and since many specimens can be measured at one time without changing any spacings or machine settings@ the method is not only very accurate but very rapid. The method has been used for measurement of PTFE and epoxy glass laminates and flexible films@ e.g. polyimide. Reproducibility lab to lab is excellent for permittivity provided minimal precautions are observed and bridge accuracy is appropriate. On most materials@ the effects of small changes in moisture or temperature are larger than any error due to the method. Lab to lab correlation on stable material such as PTFE have shown results to be consistently within 0.005 or (0.2%)."