4.1 The analyzer site precision is an estimate of the variability that can be expected in a UAR or a PPTMR produced by an analyzer when applied to the analysis of the same material over an extended time period.
4.2 For applications where the process analyzer system results are required to agree with results produced from an independent PTM, a mathematical function is derived that relates the UARs to the PPTMRs. The application of this mathematical function to an analyzer result produces a predicted PPTMR. For analyzers where the mathematical function, that is, a correlation, is developed by D7235, the analyzer site precision of the UARs is a required input to the computation.
4.3 After the correlation relationship between the analyzer results and primary test method results has been established, a probationary validation (see D3764 and D6122) is performed using an independent but limited set of materials that were not part of the correlation activity. This probationary validation is intended to demonstrate that the PPTMRs agree with the PTMRs to within user-specified requirements for the analyzer system application. The analyzer site precision is a required input to the probationary validation procedures.
4.3.1 If the process stream analyzer system and the primary test method are based on the same measurement principle(s), or, if the process stream analyzer system uses a direct and well-understood measurement principle that is similar to the measurement principle of the PTM then validation is done via D3764. Practice D3764 also applies if the process stream analyzer system uses a different measurement technology from the PTM, provided that the calibration protocol for the direct output of the analyzer does not require use of the PTM.
4.3.2 If the process stream analyzer system utilizes an indirect or mathematically modeled measurement principle such as chemometric or multivariate analysis techniques where PTMRs are required for the development of the chemometric or multivariate model, then validation of the analyzer is done using Practice D6122.
STRESS-X残余应力分析仪,符合ASTM E915及EN 15305残余应力国际分析检测标准。仪器的衍射单元安装在6自由度机械臂上,可方便对各种形状和尺寸的样品进行检测,同时配有非接触自动激光准直系统提高定位精度,有效避免机械定位误差。整个测试系统可封装在密闭的舱体中用于实验室分析,也可安装在四轮合金推车上用于现场分析,进行移动测量大型工件各个部位的残余应力。...
生产商• 美国Tinius Olsen• 意大利CEAST 熔体流动速率熔体体积流率测试仪热塑性塑料在规定的温度和负荷条件下,每10min通过标准口模,物质的量为熔体流动速率;体积的量为熔体体积流率。 单位:g/10minGB/T 3682-2000ISO 1133ASTM D 1238 简介• 热塑性塑料熔体质量流动速率和熔体体积流动速率与剪切速率有关。...
而ASTM D6377是由奥地利格拉布纳仪器公司开发与编写。并在1999年,Werner Grabner博士也因开发与编写两种蒸气压测定标准ASTM D6377(原油),ASTM D6378和一种闪点测定标准ASTM D6450得到了ASTM(美国试验材料协会)颁发的 “杰出贡献奖” 。在2001年,奥地利格拉布纳仪器公司编写了ASTM D6897用于测试液化石油气 (LPG)。...
随着对土壤修复和治理的需求日益增长,这个新方法的出现,及时为行业提供了一个土壤重金属定量分析的标准方法。ASTM D8064-16适用于各种土壤基质中铬、镍、砷、镉、汞、铜、锌和铅的测定。这八种重金属元素在工业制作过程中广泛出现,且会残留在土壤中,HDXRF作为一种土壤重金属定量分析的标准方法,可以达成您准确、快速、简易的现场测试需求。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号