EN 1870-19-2013 发布历史

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit) and building site saws, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to cut wood-based material may also be used for cutting hardened plastic materials with similar physical characteristics as wood. NOTE 1 For the definition of stationary and displaceable machine see 3.2.9 and 3.2.10. NOTE 2 Circular saw benches are used for ripping, cross cutting, dimensioning and grooving. Building site saws are used for ripping, cross cutting and dimensioning. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-1:2012; a hand-held motor-operated electric tool and a saw bench to form an integrated whole are covered by EN 60745-1:2009 together with EN 60745-2-5: 2010. For the purpose of this document, building site saws having a tiltable spindle are considered to be circular saw

EN 1870-19-2013由欧洲标准化委员会 IX-CEN 发布于 2013。

EN 1870-19-2013在国际标准分类中归属于: 79.120.10 木工机械。

EN 1870-19-2013 发布之时，引用了标准

EN 614-1+A1-2009 机械的安全性.符合人体工程学设计原则.第1部分:术语和一般原则
EN 847-1-2013
EN 894-1+A1-2008 机械的安全性.显示和控制致动器的设计的人类工效学要求.第1部分:人机交互与显示和控制执行器的一般原理
EN 894-2+A1-2008 机械的安全性.显示和控制致动器的设计的人类工效学要求.第2部分:显示器
EN 894-3+A1-2008 机械的安全性.显示和控制致动器的设计的人类工效学要求.第3部分:控制执行器
EN 1005-1-2001 机械安全性.人体物理性能.第1部分:术语和定义
EN 1005-1+A1-2008 机械的安全性.人类的物理性能.第1部分:术语和定义
EN 1005-2+A1-2008 机械安全.人类物理性能.第2部分:机械和机械零部件的人工处理
EN 1005-3+A1-2008 机械的安全性.人类的物理性能.第3部分:机械操作的建议力量限值
EN 1005-4+A1-2008 机械的安全性.人类的物理性能.第4部分:与机械有关的工作姿势和动作的评价
EN 1037+A1-2008 机械的安全性.防止意外启动
EN 50370-1-2005 电磁兼容性.机床的产品系列标准.第1部分:电磁干扰
EN 50370-2-2003 电磁兼容性.机床产品系列标准.第2部分:抗扰度
EN 50525-2-21-2011 电缆.额定电压为450/750 V(U0/U)及以下的低压节能电缆.第2-21部分:一般应用电缆.交联人造橡胶绝缘软电缆
EN 60204-1-2006 机械安全性.机械电气设备.第1部分:一般要求;包含修改件A1-2009;合并勘误表2010年2月
EN 60439-1-1999
EN 60529-1991 隔离罩(IP规范)提供的保护等级规范(IEC 529-89)
EN 60825-1-2007
EN 61310-1-2008 机械安全性.指示,标志和操作.第1部分:可视,可听和可触模信号的要求
EN 61800-5-2-2007 可调速的电力传动系统.第5-2部分:安全要求.功能
EN ISO 3743-1-2010 声学.利用声压的噪声源声功率级和声能级的测定.专用混响现场内小型可移动声源的工程方法.硬质围墙试验室用对比法
EN ISO 3743-2-2009 声学.声压法测定噪声源声功率级.混响声场中小型可移动声源的工程检测法.第2部分:专用混响试验室法
EN ISO 3744-2010 声学.声压法测定噪声源的声功率级.反射面上近似自由场的工程法
EN ISO 3745-2012 声学.用声压法测定噪声源声功率级.消声室和半消声室精密法
EN ISO 3746-2010 声学.声压法测定噪声源声功率级使用标准声源简易法,通过密封测量表面参考反射面的方式测得
EN ISO 4413-2010 液压流体动力.通用规则和安全要求系统及其组件(ISO 4413:2010)

EN 1870-19-2013的历代版本如下：

2013年 EN 1870-19-2013 木工机械安全性.圆盘锯床.第19部分:圆锯架(带及不带滑台)和建筑工地锯

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 EN 1870-19-2013 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: EN 1870-19-2013
发布日期: 2013年
实施日期
废止日期: 无
国际标准分类号: 79.120.10
发布单位: IX-CEN
引用标准: EN 614-1+A1-2009 EN 847-1-2013 EN 894-1+A1-2008 EN 894-2+A1-2008 EN 894-3+A1-2008 EN 1005-1-2001 EN 1005-1+A1-2008 EN 1005-2+A1-2008 EN 1005-3+A1-2008 EN 1005-4+A1-2008 EN 1037+A1-2008 EN 1088+A2-2008 EN 50370-1-2005 EN 50370-2-2003 EN 50525-2-21-2011 EN
被代替标准: EN 1870-1+A1-2009 FprEN 1870-19-2013

适用范围: This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit) and building site saws, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to cut wood-based material may also be used for cutting hardened plastic materials with similar physical characteristics as wood. NOTE 1 For the definition of stationary and displaceable machine see 3.2.9 and 3.2.10. NOTE 2 Circular saw benches are used for ripping, cross cutting, dimensioning and grooving. Building site saws are used for ripping, cross cutting and dimensioning. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-1:2012; a hand-held motor-operated electric tool and a saw bench to form an integrated whole are covered by EN 60745-1:2009 together with EN 60745-2-5: 2010. For the purpose of this document, building site saws having a tiltable spindle are considered to be circular saw

EN 1870-19-2013

Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws [Superseded: CEN EN 1870-1, CEN EN 1870-1]