VDI/VDE/VDMA 2632 Blatt 2-2015 发布历史

Industrial manufacturing processes are characterised by a constantly progressing automation and increasingly stricter requirements relating to manufacturing quality. In many cases this is not possible without using image processing systems. The standard provides assistance in the preparation of a requirement specification for industrial image processing systems and thereby supports the communication between the supplier and the user of image processing systems in the project phase. Particular emphasis has been placed on the representation and description of influencing factors as well as on their effects. The project partners will thus be able to identify influences at an early stage during planning and to find optimised solutions. The contents of this standard correspond to VDI/VDE 2632 Part 2:2013-09, however, some editorial changes were madem, and Section 2 and Section 3 were updated.

VDI/VDE/VDMA 2632 Blatt 2-2015由德国机械工程师协会 DE-VDI 发布于 2015-10。

VDI/VDE/VDMA 2632 Blatt 2-2015在国际标准分类中归属于: 35.240.50 信息技术在工业中的应用。

VDI/VDE/VDMA 2632 Blatt 2-2015 发布之时，引用了标准

DIN 1319-1-1995 测量技术基础.第1部分:基本术语
DIN 1319-2-2005 计量学基础.第2部分:与测量设备相关的术语
DIN 1319-3-1996 计量基础.第3部分:单一测量值测量、测量误差评价
DIN 1319-4-1999 计量学的基本知识.第4部分:测量评估.测量的不定度
DIN 32937-2006 检验、测量和试验设备的控制.检验、测量和试验设备的计划、管理和使用
DIN 69901-1-2009 项目管理.项目管理系统.第1部分:基本原则
DIN 69901-2-2009 项目管理.项目管理系统.第2部分:过程模型
DIN 69901-3-2009 项目管理.项目管理系统.第3部分:方法
DIN 69901-4-2009 项目管理.项目管理系统.第4部分:数据模型
DIN 69901-5-2009 项目管理.项目管理系统.第5部分:概念
DIN EN ISO 10012-2004 测量管理系统.测量过程和测量设备的要求
DIN EN ISO 10360-1-2003 产品几何量规范(GPS).坐标测量仪(CMM)验收和再检定试验.第1部分:术语
DIN EN ISO 10360-2-2010 产品几何技术规范(GPS).坐标测量机(CMM)的验收检测和复检检测.第2部分:用于测量尺寸的坐标测量机(ISO 10360-2-2009).德文版本EN ISO 10360-2-2009

VDI/VDE/VDMA 2632 Blatt 2-2015的历代版本如下：

2015年10月 VDI/VDE/VDMA 2632 Blatt 2-2015

VDI/VDE/VDMA 2632 Blatt 2-2015 由 VDI/VDE 2632 Blatt 2-2013 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 VDI/VDE/VDMA 2632 Blatt 2-2015 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: VDI/VDE/VDMA 2632 Blatt 2-2015
发布日期: 2015年10月
实施日期
废止日期: 无
国际标准分类号: 35.240.50
发布单位: DE-VDI
引用标准: DIN 1319-1-1995 DIN 1319-2-2005 DIN 1319-3-1996 DIN 1319-4-1999 DIN 32937-2006 DIN 69901-1-2009 DIN 69901-2-2009 DIN 69901-3-2009 DIN 69901-4-2009 DIN 69901-5-2009 DIN EN ISO 10012-2004 DIN EN ISO 10360-1-2003 DIN EN ISO 10360-2-2010 DIN EN ISO 10360-3-20
被代替标准: VDI/VDE 2632 Blatt 2-2013

适用范围: Industrial manufacturing processes are characterised by a constantly progressing automation and increasingly stricter requirements relating to manufacturing quality. In many cases this is not possible without using image processing systems. The standard provides assistance in the preparation of a requirement specification for industrial image processing systems and thereby supports the communication between the supplier and the user of image processing systems in the project phase. Particular emphasis has been placed on the representation and description of influencing factors as well as on their effects. The project partners will thus be able to identify influences at an early stage during planning and to find optimised solutions. The contents of this standard correspond to VDI/VDE 2632 Part 2:2013-09, however, some editorial changes were madem, and Section 2 and Section 3 were updated.

VDI/VDE/VDMA 2632 Blatt 2-2015

Machine vision - Guideline for the preparation of a requirement specification and a system specification