GB/T 25119-2010
Railway applications.Electronic equipments used on rail vehicles
- Standard No.
- GB/T 25119-2010
- Language
- Chinese
- Release Date
- 2010
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2022-07
- Replace By
- GB/T 25119-2021
- Latest
- GB/T 25119-2021
- Scope
- This standard stipulates the use, design, manufacture and test requirements of electronic devices, and also specifies the basic requirements for software and hardware that must be possessed by the device for durability and reliability. If appropriate, additional requirements in other standards or specifications can be used as supplementary requirements of this standard. See Appendix B for the terms of this standard that can be negotiated and reached by both parties. This standard applies to all control, adjustment, protection, power supply and other electronic devices installed on rail transit vehicles (including subways and urban rail vehicles). These devices may be powered by the on-board battery or generator, or may be powered by a low-voltage power source (transformer, voltage divider, auxiliary power supply) connected directly or indirectly to the catenary; in this standard, electronic devices refer to semiconductor devices and other General-purpose components are the main components of the device, and these components are usually mounted on a printed board.
GB/T 25119-2010 Referenced Document
- GB 4208-2008 Degrees of protection provided by enclosure(IP code)
- GB 9254 Limits and methods of measurement of radio disturbance for information technology equipment
- GB/T 12629 Thin epoxide woven glass fabric copper clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards
- GB/T 13555 Copper-clad polyimide film laminates for flexible printed circuits*， 2017-12-29 Update
- GB/T 17626.2 Electromagnetic compatibility.Testing and measurement techniques.Electrostatic discharge immunity test*， 2018-06-07 Update
- GB/T 17626.3 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test*， 2016-12-13 Update
- GB/T 17626.4-2008 Electromagnetic compatibility.Testing and measurement techniques.Electrical fast transient/burst immunity test
- GB/T 17626.5 Electromagnetic compatibility—Testing and measurement techniques－Surge immunity test*， 2019-06-04 Update
- GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*， 2017-12-29 Update
- GB/T 18290.2 Solderless connections.Part 2:Crimped connections.General requirements, test methods and practical guidance*， 2015-12-31 Update
- GB/T 19001 Quality Management System Requirements*， 2017-07-01 Update
- GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
- GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
- GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
- GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
- GB/T 4588.1 Sectional specification:Single and double sided printed boards with plain holes
- GB/T 4588.2 Sectional specification:Single and double sided printed boards with plated-through holes
- GB/T 4588.3 Design and use of printed boards
- GB/T 4728.1 Graphical symbols for electrical diagrams.Part 1:General information*， 2018-07-13 Update
- GB/T 4728.10 Graphical symbols for electrical diagrams—Part 10：Telecommunications: Transmission*， 2022-10-14 Update
- GB/T 4728.11 Graphical symbols for electrical diagrams—Part 11：Architectural and topographical*， 2022-10-14 Update
- GB/T 4728.12 Graphical symbols for electrical diagrams—Part 12：Binary logic elements*， 2022-10-14 Update
- GB/T 4728.13 Graphical symbols for electrical diagrams—Part 13： Analogue elements*， 2022-10-14 Update
- GB/T 4728.2 Graphical symbols for electrical diagrams—Part 2：Symbol elements,qualifying symbols and other symbols having general application*， 2018-07-13 Update
- GB/T 4728.3 Graphical symbols for electrical diagrams.Part 3:Conductors and connecting devices*， 2018-07-13 Update
- GB/T 4728.4 Graphical symbols for electrical diagrams—Part 4: Basic passive components*， 2018-07-13 Update
- GB/T 4728.5 Graphical symbols for electrical diagrams—Part 5：Semiconductors and electron tubes*， 2018-07-13 Update
- GB/T 4728.6 Graphical symbols for electrical diagrams—Part 6： Production and conversion of electrical energy*， 2022-10-14 Update
- GB/T 4728.7 Graphical symbols for electrical diagrams—Part 7：Switchgear, controlgear and protective devices*， 2022-10-14 Update
- GB/T 4728.8 Graphical symbols for electrical diagrams—Part 8：Measuring instruments, lamps and signalling devices*， 2022-10-14 Update
- GB/T 4728.9 Graphical symbols for electrical diagrams—Part 9： Telecommunications :Switching and peripheral equipment*， 2022-10-14 Update
- GB/T 5080.1 Reliability testing.Part 1:Test conditions and statistical test principles*， 2012-11-05 Update
- GB/T 5080.2 Reliability testing.Part 2:Design of test cycles*， 2012-11-05 Update
- GB/T 5080.4 Equipment reliability testing--Procedure for point estimates and confidence intervals from reliability determination tests(Exponential distribution)
- GB/T 5080.5 Equipment reliability testing--Compliance test plans for success ratio
- GB/T 5080.6 Equipment reliability testing--Tests for the validity of a constant failure rate assumption
- GB/T 5080.7 Equipment reliability testing--Compliance test plans for failure rate and mean time between failures assuming constant failure rate
- GB/T 6988.1 Preparation of documents used in electrotechnology.Part 1:Rules
GB/T 25119-2010 history
- 2021 GB/T 25119-2021 Railway applications—Electronic equipment used on rolling stock
- 2010 GB/T 25119-2010 Railway applications.Electronic equipments used on rail vehicles