ZH
RU
ES

Atomization Performance Tester

Atomization Performance Tester, Total:499 items.

In the international standard classification, Atomization Performance Tester involves: Leather technology, Surface treatment and coating, Road vehicle systems, Refrigerating technology, Products of the textile industry, Road engineering, Linear and angular measurements, Diagnostic, maintenance and test equipment, Plastics, Rubber, Metrology and measurement in general, Nuclear energy engineering, Corrosion of metals, Non-destructive testing, Mining and quarrying, Construction materials, Non-ferrous metals, Powder metallurgy, Electricity. Magnetism. Electrical and magnetic measurements, Protective equipment, Body care equipment, Geology. Meteorology. Hydrology, Thermodynamics and temperature measurements, Telecontrol. Telemetering, Medical equipment, Lubricants, industrial oils and related products, Alarm and warning systems, Textile machinery, Textile fibres, Packaging materials and accessories, Analytical chemistry, Testing of metals, Standardization. General rules, Environmental testing, Road vehicles in general, Rubber and plastics products, Equipment for the metallurgical industry, Miscellaneous domestic and commercial equipment, Mechanical testing, Farming and forestry, Protection against fire, Rectifiers. Convertors. Stabilized power supply, Paper and board, Burners. Boilers, Inorganic chemicals, Power transmission and distribution networks, Earth-moving machinery, Optoelectronics. Laser equipment, Optics and optical measurements, Test conditions and procedures in general, Non-metalliferous minerals, Measurement of time, velocity, acceleration, angular velocity, Air quality, Magnetic materials, Sewing machines and other equipment for the clothing industry, Extraction and processing of petroleum and natural gas, Industrial automation systems, Semiconducting materials, Petroleum products in general, Lamps and related equipment, Ventilators. Fans. Air-conditioners, On-board equipment and instruments, Radiation protection, Radiation measurements, Shipbuilding and marine structures in general, Raw materials for rubber and plastics, Ceramics, Internal combustion engines for road vehicles, Energy and heat transfer engineering in general, Networking, Paints and varnishes, Plant and equipment for the food industry, Electrical and electronic testing, Cereals, pulses and derived products, Furniture, Services, Items of art and handicrafts, Particle size analysis. Sieving, Aircraft and space vehicles in general, Protection of and in buildings, Domestic, commercial and industrial heating appliances, Applications of information technology, Galvanic cells and batteries, Electromagnetic compatibility (EMC).

GM North America, Atomization Performance Tester

GM GM9068P-2003 Test for Fogging Characteristics of Plastics

SE-SIS, Atomization Performance Tester

SIS SS 890-1979 Atomizing oil burners of the monobloc type — Performance and testing
SIS 65 00 98-1966 Textilen. Determination of resistance to externa! ivetting of fabrics.
SIS 11 70 02-1967 Hardenabilitv test by end quenching steel (Jominy test)

Professional Standard - Light Industry, Atomization Performance Tester

QB/T 2728-2005 Leather - Physical and mechanical tests - Determination of fogging characteristics
QB/T 2515-2001 Methods of measurement for the electrical and photometric performance of metal halide lamps

International Organization for Standardization (ISO), Atomization Performance Tester

ISO 17071:2006 Leather - Physical and mechanical tests - Determination of fogging characteristics
ISO/DIS 17491-4 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
ISO 179-1:2000 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
ISO 16001:2017 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests
ISO/DIS 17491-5:2011 Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)
ISO 23706:2020 Plastics — Determination of apparent activation energies of property changes in standard weathering test methods
ISO/CD 17491-5 Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)
ISO 5801:2017 Fans - Performance testing using standardized airways
ISO/FDIS 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 16331-1:2012 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
ISO 16331-1:2017 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
ISO 5801:2007 Industrial fans - Performance testing using standardized airways
ISO 6914:2013 Rubber, vulcanized or thermoplastic.Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 6914:2021 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing

Korean Agency for Technology and Standards (KATS), Atomization Performance Tester

KS M ISO 17071:2007 Leather－Physical and mechanical tests－Determination of fogging characteristics
KS M ISO 17071-2007(2017) Leather－Physical and mechanical tests－Determination of fogging characteristics
KS M ISO 17071-2007(2022) Leather－Physical and mechanical tests－Determination of fogging characteristics
KS B 0534-2000 Method for assessing the overall performance characteristicsof ultrasonic pulse echo testing instrument
KS K ISO 17491-4-2016(2021) Protective clothing－Test methods for clothing providing protection against chemicals－Part 4：Determination of resistance to penetration by a spray of liquid(spray test)
KS C 6592-2007(2018) Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS P ISO 20776-2:2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS M 6687-2016 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS M 6687-1986 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M 6687-2016(2021) Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS C 6596-2007 Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS K ISO 17491-5:2021 Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid(manikin spray test)
KS M ISO 179-2-2012(2022) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 179-2-2012(2017) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS B 0534-2021 Methods for evaluating performance characteristics of ultrasonic pulse-echo testing systems
KS M ISO 179-1-2012(2017) Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
KS M ISO 179-1:2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS C IEC 61468:2006 Nuclear power plants－In-core instrumentation－Characteristics and test methods of self-powered neutron detectors
KS M ISO 6603-2:2002 Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS M 6785-1994 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS R 1051-2006 Testing methods for simplified carbonmonoxide testers for automobiles
KS C 8547-2017 Redox flow battery for use in energy storage system — Performance and safety tests

American Society for Testing and Materials (ASTM), Atomization Performance Tester

ASTM D1735-14 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D5289-07a Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D5289-07 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D5289-17 Standard Test Method for Rubber Property&x2014;Vulcanization Using Rotorless Cure Meters
ASTM D5289-12 Standard Test Method for Rubber Propertymdash;Vulcanization Using Rotorless Cure Meters
ASTM D1735-02 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D1735-99 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM F21-65(1996) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
ASTM F21-20 Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
ASTM D4049-06(2011) Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ASTM D6537-00(2021) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM D2084-19 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-19a Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-11(2016) Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-17 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D2084-07 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-01 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D6601-19 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
ASTM D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM E1260-03(2020) Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
ASTM D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D6537-00(2014) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D6204-04 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-99 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-01 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-05 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D3835-96 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D4166-99(2004)e1 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument (Withdrwan 2008)
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D2084-11 Standard Test Method for Rubber Propertymdash;Vulcanization Using Oscillating Disk Cure Meter
ASTM D6774-22 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM E1133-86(1996)e1 Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E1133-86(2016) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM D5867-12(2020) Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D5099-08(2022) Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM D3835-02 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D5289-06 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D6601-12 Standard Test Method for Rubber Propertiesmdash;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM D5422-03 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D6049-03(2008) Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D6049-96 Standard Test Method for Rubber Property--Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D604-91(1996)e1 Standard test method for rubber properties - Measurement of viscous and elastic properties of unvulcanized raw rubber and rubber compounds by compression between parallel plates
ASTM D6011-96(2008) Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
ASTM D5867-12 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D3835-16 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D5867-12e1 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

Group Standards of the People's Republic of China, Atomization Performance Tester

T/SASJL 0002-2021 Trim materials in motor vehicles fogging test
T/CAIA YQ005-2018 Performance testing method of liquid chromatograph
T/CAIA YQ006-2018 Performance testing method of Ion chromatography
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
T/CPQS E00020-2021 Performance requirements and test methods for Eye care appliance
T/CMSA 0024-2021 Air negative ion measuring instrument performance test specification
T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
T/CSRA 10.4-2021 Test method for aging resistance of aramid Ⅲ fiber Part 4: salt spray resistance test method
T/GDCKCJH 064-2022 Performance requirements and testing methods for cable plug testers
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/GDCKCJH 041-2021 Performance requirements and test methods of portable adhesion tester
T/CIMA 0058-2022
T/CAIA YQ003-2016 Testing Methods for Optical/Electrical Characteristics of Linear Charge Coupled Imaging Device for Spectrometer
T/CSRA 15.4-2021 Test method for aging resistance of aramid fiber Ⅲ reinforced materials Part 4: salt spray resistance test method
T/CMA JD009-2020 Dynamic test items and methods for portable braking performance testers
T/GDBX 017-2019 Low Temperature Bending Resistance Tester for Uppers of Footwear - Cold Resistance Testing Machines - Specification
T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/GDCKCJH 052-2021 Performance requirements and test method for optoelectronic integrated test instrument with integrating sphere
T/CADBM 45-2021 Testing method for decontamination performance of coating materials Environmental test chamber method
T/GDCKCJH 066-2022 Performance requirements and test methods for ozone aging test chambers
T/CAS 310-2018 Test method for cleaning performance of household fruit and vegetable washing appliances
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/CBMF 72-2019 Test method for air-purification performance of photocatalytic materials and products Removal of nitric oxides

British Standards Institution (BSI), Atomization Performance Tester

PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
13/30277597 DC BS ISO 14787. Protective clothing. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions. Atomizer test
BS EN 14147:2003 Natural stone test methods - Determination of resistance to ageing by salt mist
BS EN ISO 17071:2011 Leather. Physical and mechanical tests. Determination of fogging characteristics
BS EN ISO 17491-4:2008+A1:2016 Protective clothing. Test methods for clothing providing protection against chemicals. Determination of resistance to penetration by a spray of liquid (spray test)
BS EN IEC 62947:2022 Electrically operated spray seats for household and similar use. Methods for measuring the performance. General test methods of spray seats
18/30377401 DC BS EN ISO 179-2. Plastics. Determination of Charpy impact properties. Part 2. Instrumented impact test
BS EN 1744-1:1998 Tests for chemical properties of aggregates - Chemical analysis
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN 14786:2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
BS ISO 12136:2011 Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
BS ISO 24461:2022 Textiles. Anti-mosquito performance test method using the attractive blood-feeding apparatus
BS EN IEC 60404-16:2018 Magnetic materials - Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
BS EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Determination of resistance to freezing and thawing
BS EN IEC 60404-3:2022 Magnetic materials - Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
23/30374608 DC BS EN ISO 17491-4. Protective clothing. Test methods for clothing providing protection against chemicals - Part 4. Determination of resistance to penetration by a spray of liquid (spray test)
20/30431421 DC BS EN IEC 62947. Electrically operated spray toilet seat for household and similar use. Methods for measuring the performance. General test methods of spray seats
BS ISO 16331-1:2017 Tracked Changes. Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to disintegration of Lightweight Aggregates
20/30415176 DC BS ISO 24461. Textiles. Anti-mosquito performance test method using the attractive blood-feeding apparatus
BS 5548:1978 Specification for radiation detectors for the instrumentation and protection of nuclear reactors: characteristics and test methods
BS IEC 62706:2019 Radiation protection instrumentation. Recommended climatic, electromagnetic and mechanical performance requirements and methods of tests
BS ISO 16331-1:2012 Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
BS ISO 23706:2020 Plastics. Determination of apparent activation energies of property changes in standard weathering test methods
BS EN 50980-1:2019 Remote alcohol monitoring devices. Test methods and performance requirements - Instruments for assessment programmes
BS EN IEC 60746-4:2019 Expression of performance of electrochemical analyzers - Dissolved oxygen in water measured by membrane-covered amperometric sensors
BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing of Lightweight aggregates
BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing
BS EN ISO 8394-2:2017 Buildings and civil engineering works. Determination of extrudability for sealant. Using standardized apparatus
19/30391462 DC BS ISO 23706. Plastics. Determination of apparent activation energies of property changes in standard weathering test methods
DD CEN/TS 12390-10:2007 Testing hardened concrete — Part 10: Determination of the relative carbonation resistance of concrete
BS ISO 5801:2008 Industrial fans - Performance testing using standardized airways
BS EN 16322:2013 Conservation of Cultural Heritage. Test methods. Determination of drying properties
BS IEC 61468:2021 Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation: Characteristics and test methods of self-powered neutron detectors
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS EN ISO 6603-1:2000 Plastics - Determination of multi-axial impact behaviour of rigid plastics - Non-instrumented impact testing
BS ISO 4664-2:2006 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Torsion pendulum methods at low frequencies
BS 7967-2:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances - Guide for using electronic portable combustion gas analysers in the measurement of carbon monoxide and the determination of combustion performance
BS ISO 5011:2020 Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
BS ISO 5011:2014+A1:2018 Inlet air cleaning equipment for internal combustion engines and compressors. Performance testing
BS EN 17694-1:2023 Hydrometry. Minimum performance requirements and test procedures for water monitoring equipment. Devices for the determination of flow - Open channel instrumentation
BS EN 61511-3:2003 Functional safety - Safety instrumented systems for the process - Guidance for the determination of the required safety integrity levels
BS 7164-31.1:1997 Chemical tests for raw and vulcanized rubber - Determination of anti-degradants - High-performance liquid chromatography

American National Standards Institute （ANSI), Atomization Performance Tester

ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector
ANSI/ISA S92.02.01-1-1998 Performance Requirements for Chlorine Monoxide Detection Instruments (50-1000 ppm Full Scale)
ANSI/TAPPI T558 om-2010 Surface wettability and absorbency of sheeted materials using an automated contact angle tester
BS EN ISO 179-1:2023 Plastics. Determination of Charpy impact properties Non-instrumented impact test (British Standard)

Professional Standard - Textile, Atomization Performance Tester

FZ/T 60045-2014 Textile trim materials in the interior of automobiles.Test method for fogging characteristics
FZ/T 98019-2018 Roller-type fabric pilling performance tester
FZ/T 98022-2021 Circular Track Method Fabric Pilling Performance Tester

Professional Standard - Traffic, Atomization Performance Tester

JT/T 685-2007 Measurer for adhesion performance of retroreflective sheeting
JT/T 682-2007 Measurer for resistance to impact of raised pavement markers
JT/T 687-2007 Measurer for liner removal performance of retroreflective sheeting

Professional Standard - Public Safety Standards, Atomization Performance Tester

GA/T 485-2004 The portable braking performance tester for vehicles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Atomization Performance Tester

GB/T 28945-2012 Portable braking performance tester for vehicles
GB/T 18902-2002 Performance requirements and test methods for UHF Measuring Distance Equipment(DME)
GB/T 15750-2008 Test methods for the properties of piezoelectric ceramics.Test for the ageing properties
GB/T 1043.1-2008 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
GB/T 31364-2015 Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
GB/T 26594-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray tube
GB/T 13789-2008 Methods of measurement of the magnetic properties of magnetic sheet and strip by means a single sheet tester
GB/T 13789-2022 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
GB/T 42680-2023 Test method for liquid fuel atomization characteristics using phase Doppler technique
GB/T 23761-2009 Test method of photocatalytic materials for air purification
GB/T 26592-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray apparatus
GB/T 23762-2020 Test method for water purification performance of photocatalytic materials
GB/T 26593-2011 Non-destructive testing instruments.Properties test method for performance of industrial X-ray computed tomography(CT) equipment
GB/T 41760-2022 Test method for spontaneous polarization of tourmaline
GB/T 42260-2022 Electrochemical performance test of lithium iron phosphate—Test method for cycle life
GB/T 11547-2008 Plastic.Methods of test for the determination of the effects of immersion in liquid chemicals
GB/T 23764-2009 Test method of photocatalytic materials for self-cleaning
GB/T 33252-2016 Nanotechnology—Performance testing for laser confocal microscope Raman spectrometers
GB/T 14282.3-1993 Performance requirements and test methods for ILS localizer
GB/T 14282.1-1993 Performance requirements and test methods for ILS glide path beacon
GB/T 11711-2002 Marine automatic radar plotting aids(ARPA)--Performance requirements,methods of testing and required test results
GB/T 30809-2014 UV light sources for testing properties of photocatalytic materials
GB/T 9871-1988 Rubber,vulcanized--Determination of ageing characteristics by measurement of stress at a given elongation
GB/T 24488-2009 Test method for electrochemical properties of magnesium alloys sacrificial anode
GB/T 42265-2022 Test method for air-purification performance of photocatalytic materials—Removal of toluene
GB/T 5594.6-1985 Test methods for properties of structure ceramic used in electronic components--Test method for chemical durability
GB/T 14282.2-1993 Performance requirements and test methods for ILS glide slope receiver
GB/T 14282.4-1993 Performance requirements and test methods for ILS localizer receiver
GB/T 4893.8-2023 Testing of physical and chemical properties of furniture surfaces Part 8: Determination of wear resistance
GB/T 41937-2022 Rubber- or plastics-coated fabrics—Physical and mechanical tests—Determination of flex resistance by the flexometer method
GB/T 9871-2008 Rubber,vulcanized or thermoplastic.Determination of aging characteristics by measurement of stress relaxation
GB/T 14282.1-2006 Instrument landing system(ILS). Part 1: Performance requirements and test methods for glide path beacon
GB/T 14282.3-2006 Instrument landing system(ILS). Part 3: Performance requirements and test methods for ILS localizer
GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys--Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus

未注明发布机构, Atomization Performance Tester

BS EN 468:1995(1999) Protective clothing — Protection against liquid chemicals — Test method : Determination of resistance to penetration by spray (Spray Test)
BS 3900-F4:1968(2008) Methods of test for paints Part F4 : Resistance to continuous salt spray
BS EN 1744-5:2006(2007) Tests for chemical properties of aggregates — Part 5 : Determination of acid soluble chloride salts
DIN EN ISO 179-1:2001 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact testing
BS 2782-3-Methods 352F:1996 Methods of testing plastics Part 3 . Mechanical properties Method 352F.Determination of impact resistance by the free - falling dart method (instrumented puncture test)
ISO/PAS 03930:2009 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests

German Institute for Standardization, Atomization Performance Tester

DIN EN 14786:2007-03 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test; German version EN 14786:2006
DIN 6847-5:1998 Medical electron accelerator - Part 5: Constancy test of functional performance characteristics
DIN EN ISO 17491-4:2016-09 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008 + Amd. 1:2016); German version EN ISO 17491-4:2008 + A1:2016
DIN EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003
DIN 43743:1977 Stabilized supply apparatus for measurement; definitions, expression and testing of performance
DIN EN ISO 17491-4:2023-07 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO/DIS 17491-4:2023); German and English version prEN ISO 17491-4:2023 / Not...
DIN EN 14786:2007 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test; English version of DIN EN 14786:2007-03
DIN ISO 16331-1:2020-09 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
DIN 24163-2:1985 Fans; performance testing, standardized test airways
DIN EN 16322:2013-12 Conservation of Cultural Heritage - Test methods - Determination of drying properties; German version EN 16322:2013
DIN EN ISO 17071:2011 Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006); German version EN ISO 17071:2011
DIN EN 1744-5:2006-12 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts; German version EN 1744-5:2006
DIN EN ISO 179-2:2020-09 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020); German version EN ISO 179-2:2020
DIN ISO 16331-1:2020 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
DIN EN ISO 5801:2018-04 Fans - Performance testing using standardized airways (ISO 5801:2017); German version EN ISO 5801:2017
DIN EN 60851-4:2017-04 Winding wires - Test methods - Part 4: Chemical properties (IEC 60851-4:2016); German version EN 60851-4:2016 / Note: DIN EN 60851-4 (2005-11) remains valid alongside this standard until 2019-08-10.
DIN EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing English version of DIN EN 1367-1:2007-06
DIN 6653-2:2004 Beverage dispensing systems - Accessories - Part 2: Performance requirements and test methods for apparatus for the detection of carbon dioxide
DIN EN ISO 179-1:2022-05 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/DIS 179-1:2022); German and English version prEN ISO 179-1:2022 / Note: Date of issue 2022-03-25*Intended as replacement for DIN EN ISO 179-1 (2010-11).
DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010 / Note: To be replaced by DIN EN ISO 179-1 (2022-05).
DIN IEC 60404-3 Berichtigung 1:2010-09 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:1992 + A1:2002 + A2:2009), Corrigendum to DIN IEC 60404-3:2010-05 / Note: To be replaced b...
DIN IEC 60404-3:2010-05 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:1992 + A1:2002 + A2:2009) / Note: To be replaced by DIN EN IEC 60404-3 (2021-07).
DIN CEN/TS 12390-10:2007 Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete; German version CEN/TS 12390-10:2007
DIN EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
DIN EN 14831:2005-07 Fasteners - Tightening performance - Torque/Angle simplified test method; German version EN 14831:2005
DIN EN 1367-6:2008 Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl); English version of DIN EN 1367-6:2008-12
DIN EN 12830:2018-10 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German version EN 12830:2018

Professional Standard - Electricity, Atomization Performance Tester

DL/T 2357-2021 Test method for atomization performance of slurry nozzle for wet flue gas desulfurization
DL/T 1694.5-2017 Calibration specifications for high-voltage testing instruments and equipment Part 5: Zinc oxide arrester resistive current tester
DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations
DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
DL/T 987-2017 General technical requirements for zinc oxide arrester resistive current tester

Professional Standard - Nuclear Industry, Atomization Performance Tester

EJ/T 1139-2001 γ-ray radiation meters and γ-ray spectrometers used for prospecting-characteristics and test methods

Japanese Industrial Standards Committee (JISC), Atomization Performance Tester

JIS D 1029:1979 Testing method for simplified carbon monoxide testers for automobiles
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS T 8032-4:2015 Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
JIS T 8032-5:2015 Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)
JIS B 7996:2018 Performance evaluation test method of automated concentration monitoring instrument of dust in flue gas
JIS C 2556:2015 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
JIS K 7211-2:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing

Indonesia Standards, Atomization Performance Tester

SNI 07-0413-1989 Test method for corrosion resistance by salt fog spray
SNI 07-0479-1989 Accelerated corrosion resistance by acetic acid salt-copper salt fog spray, Test method
SNI 06-0708-1989 Petroleum products and their derivatives, Test method for corrosion against copper
SNI ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
SNI 03-1768-1990 Aggregates for concrete, Test methods for reactive properties against alkalin by chemical method

Professional Standard - Machinery, Atomization Performance Tester

JB/T 8283-1999 Methods for testing the operating characteristics of acoustic emission instrumentation
JB/T 5525-2011 Non-destructive testing instruments characteristics measured method for one-channel eddy current testing instrument
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection

IN-BIS, Atomization Performance Tester

Association Francaise de Normalisation, Atomization Performance Tester

NF B10-632:2004 Natural stone test methods - Determination of resistance to ageing by salt mist.
NF G52-050*NF EN ISO 17071:2011 Leather - Physical and mechanical tests - Determination of fogging characteristics
NF EN 14786:2006 Vêtements de protection - Détermination de la résistance à la pénétration par les produits chimiques pulvérisés, les émulsions et les dispersions - Essai de pulvérisation
NF EN ISO 17491-4:2008 Vêtements de protection - Méthodes d'essai pour les vêtements fournissant une protection contre les produits chimiques - Partie 4 : détermination de la résistance à la pénétration par une vaporisation de liquide (essai au brouillard)
NF B10-636*NF EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester.
NF S74-565*NF EN 14786:2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test.
FD V03-112:2013 Produits alimentaires - Qualification des thermocycleurs pour le maintien de leurs performances - Mise en oeuvre des tests et indicateurs de performance
NF EN 60746-2:2004 Expression des qualités de fonctionnement des analyseurs électrochimiques - Partie 2 : mesure du pH
NF E51-271*NF ISO 18740:2016 Turbocompressors - Performance test code - Simplified acceptance test
NF ISO 18740:2016 Turbocompresseurs - Code d'essais des performances - Essai de réception simplifié
NF S74-516-4/A1*NF EN ISO 17491-4/A1:2016 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4 : determination of resistance to penetration by a spray of liquid (spray test) - Amendment 1
NF EN ISO 17491-4/A1:2016 Vêtements de protection - Méthodes d'essai pour les vêtements fournissant une protection contre les produits chimiques - Partie 4 : détermination de la résistance à la pénétration par vaporisation de liquide (essai au brouillard) - Amendement 1
NF P18-653-4*NF EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4 : determination of drying shrinkage
NF C28-901-16*NF EN IEC 60404-16:2018 Magnetic materials - Part 16 : methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
NF EN 16322:2013 Conservation du patrimoine culturel - Méthodes d'essai - Détermination des propriétés de séchage
NF T51-035-2*NF EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test
NF T51-035-2/A1:2012 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test - Amendment 1 : précision data.
NF E51-008*NF EN ISO 5801:2017 Fans - Performance testing using standardized airways
NF ISO 9959-1:1993 Machines à dessiner à commande numérique - Essai de traçage pour l'évaluation des performances - Partie 1 : traceurs de vecteurs.
NF P18-653-8*NF EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8 : determination of resistance to disintegration of Lightweight Aggregates
NF P18-653-1*NF EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1 : determination of resistance to freezing and thawing
NF V03-744:1993 Rice. Determination of viscoelastic properties at various stages of cooking. Method using a viscolelastograph.
NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
NF E18-150*NF EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
NF ISO 5682-3:2017 Matériel de protection des cultures - Équipement de pulvérisation - Partie 3 : méthode d'essai pour évaluer les performances des systèmes de régulation du volume/surface
NF C46-803:1994 Marine speed and distance measuring equipment (sdme). Operational and performance requirements. Methods of testing and required test results.

European Committee for Standardization (CEN), Atomization Performance Tester

EN ISO 17071:2011 Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006)
EN 14147:2003 Natural stone test methods - Determination of resistance to ageing by salt mist
EN 468:1994 Protective Clothing - Protection Against Liquid Chemicals - Test Method: Determination of Resistance to Penetration by Spray (Spray Test)
EN ISO 17491-4:2008/A1:2016 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016)
EN 14786:2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
EN ISO 16001:2017 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests
prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods
EN 1744-1:1998 Tests for Chemical Properties of Aggregates - Part 1: Chemical Analysis
EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
EN 1367-1:1999 Tests for Thermal and Weathering Properties of Aggregates - Part 1: Determination of Resistance to Freezing and Thawing
EN ISO 5801:2017 Fans - Performance testing using standardized airways
prEN 17694-1-2021 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 1: Open channel instrumentation

CZ-CSN, Atomization Performance Tester

CSN 42 0895 Cast.3-1988 Testing of granulated aluminium powder, powder and paste. Determination of active aluminium content
CSN EN 24920-1994 Textiles. Determination of resistance to surface wetting (spray test) of fabrics
CSN 42 0895 Cast.20-1988 Testing of granulated aluminium powder, powder and paste. Water suspension stability test
CSN 35 6512-1988 Electronic measuring instruments. General requirements on firmness and resistance at performance of mechanical influences and testing methods

National Metrological Verification Regulations of the People's Republic of China, Atomization Performance Tester

JJG 080-2020 Protruding road sign impact resistance performance tester
JJG 080-2007 Protruding road sign impact resistance performance tester
JJG(交通) 083-2007 Measurer for Adhesion Performance of Retroreflective Sheeting
JJG(交通) 080-2007 Measurer for Resistance to Impact of Raised Pavement Markers
JJG(船舶) 01-1990 Verification regulations for lead-acid battery electrical performance tester
JJG(交通) 085-2007 Measurer for Liner Removal Performance of Retroreflective Sheeting
JJG(机械) 114-1992 SP-428 Verification Regulations for Electrostatic Photosensitive Material Electrical Performance Tester
JJG(民航) 0084-2005 T1201 VOR/ADF/ILS discrete function interface unit

ISA - International Society of Automation, Atomization Performance Tester

ISA S12.15 PT I-1990 Performance Requirements for Hydrogen Sulfide Detection Instruments (10-100 ppm)
ISA 92.0.01 PART I-1998 Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide
ISA 92.02.01 PART I-1998 Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

国家市场监督管理总局、中国国家标准化管理委员会, Atomization Performance Tester

GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
GB/T 40726-2021 Rubber- or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles
GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
GB/T 24488-2021 Test method for electrochemical properties of magnesium alloys sacrificial anode
GB/T 39472-2020 Performance requirements and test methods for BeiDou navigation satellite system signal record and playback devices
GB/T 39716-2020 Test method for air-purification performance of photocatalytic materials and products—Removal of nitric oxide

Lithuanian Standards Office , Atomization Performance Tester

LST EN ISO 17071:2011 Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006)
LST EN 14147-2004 Natural stone test methods - Determination of resistance to ageing by salt mist
LST EN ISO 17491-4:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008)
LST EN 14786-2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
LST EN 10280+A1-2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
LST EN 1744-5-2007 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts

AENOR, Atomization Performance Tester

UNE-EN ISO 17071:2011 Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006)
UNE-EN 14147:2004 Natural stone test methods - Determination of resistance to ageing by salt mist
UNE-EN ISO 17491-4:2009 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008)
UNE-EN 14786:2007 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
UNE-EN 1744-5:2007 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
UNE-EN 1367-7:2015 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates

Danish Standards Foundation, Atomization Performance Tester

DS/EN 14147:2004 Natural stone test methods - Determination of resistance to ageing by salt mist
DS/EN ISO 17491-4:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
DS/EN 14786:2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
DS/EN 50291-1:2021 Gas detectors – Electrical apparatus for the detection of carbon monoxide in domestic premises – Part 1: Test methods and performance requirements
DS/EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
DS/EN 1744-5:2007 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
DS/EN ISO 5801:2009 Industrial fans - Performance testing using standardized airways
DS/EN 61000-4-15:2011 Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

GM Daewoo, Atomization Performance Tester

GMKOREA EDS-T-7694-2012 Test Method for Determining fogging Characteristics of Automotive Interior Trim Materials ??? ???? ?? ?? ???? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3

National Metrological Technical Specifications of the People's Republic of China, Atomization Performance Tester

JJF(纺织) 050-2015 Calibration Specification for Yarn Abrasion Measuring Instrument
JJF(纺织) 085-2019 Calibration Specification for Fabric Water Vapor Transmission Testers
JJF 1534-2015 Calibration Specification for Data Network Performance Testers
JJF(纺织)050-2015 Calibration Specification for Yarn Abrasion Measuring Instrument
JJF(纺织)085-2019 Calibration Specification for Fabric Water Vapor Transmission Testers
JJF 1168-2007 Calibration Specification for Portable Braking Performance Tester for Motor Vehicles
JJF(机械) 1017-2018 Calibration specification for motor vehicle comprehensive performance tester
JJF 2010-2022 Calibration specification for reflective film adhesion tester
JJF(机械)1017-2018 Calibration specification for motor vehicle comprehensive performance tester
JJF(纺织)106-2023 Calibration Specification for General Textile Abrasion Resistance Testers
JJF(纺织) 076-2018 Calibration Specification for Fabrics Mace Snagging Resistance Tester
JJF(纺织)076-2018 Calibration Specification for Fabrics Mace Snagging Resistance Tester
JJF(纺织) 091-2020 Calibration Specification of Tester for Down-proof Properties of Fabrics(Tumble Test)
JJF(纺织) 100-2021 Calibration Specification for Textile Electrical Resistance Testers
JJF(纺织)100-2021 Calibration Specification for Textile Electrical Resistance Testers
JJF(纺织)091-2020 Calibration Specification of Tester for Down-proof Properties of Fabrics(Tumble Test)

Military Standard of the People's Republic of China-General Armament Department, Atomization Performance Tester

GJB 2241A-2008 Performance test method for pulse laser rangefinder
GJB 2241-1994 Pulse laser rangefinder performance test method
GJB 5004-2001 Test methods for physical and chemical properties of military leather
GJB 8684.21-2015 Pyrotechnic powder performance test methods Part 21: Determination of mass concentration of smoke solid particles Filter membrane weighing method
GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy

European Committee for Electrotechnical Standardization（CENELEC）, Atomization Performance Tester

EN IEC 62947:2022 Electrically operated spray seats for household and similar use - Methods for measuring the performance - General test methods of spray seats
EN IEC 60404-16:2018 Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
EN IEC 60404-3:2022 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester

ES-UNE, Atomization Performance Tester

UNE-EN IEC 62947:2023 Electrically operated spray seats for household and similar use - Methods for measuring the performance - General test methods of spray seats
UNE-EN ISO 17491-4:2009/A1:2016 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016)
UNE-EN 16322:2016 Conservation of Cultural Heritage - Test methods - Determination of drying properties
UNE-EN ISO 179-2:2021 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
UNE-EN ISO 5801:2019 Fans - Performance testing using standardized airways (ISO 5801:2017)
UNE-EN IEC 60404-16:2018/AC:2018-12 Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester (Endorsed by Asociación Española de Normalización in February of 2019.)
UNE-EN IEC 60404-16:2018 Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN IEC 60404-3:2022 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 50980-1:2019 Remote alcohol monitoring devices - Test methods and performance requirements - Part 1: Instruments for assessment programmes (Endorsed by Asociación Española de Normalización in December of 2019.)

AT-ON, Atomization Performance Tester

ONORM EN 24920-1993 Textile fabrics - Determination of resistance to surface wetting. (Spray test)
OENORM EN 17694-1-2021 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow Part 1: Open channel instrumentation

KR-KS, Atomization Performance Tester

KS C 6592-2007(2023) Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS K ISO 17491-4-2016 Protective clothing－Test methods for clothing providing protection against chemicals－Part 4：Determination of resistance to penetration by a spray of liquid(spray test)
KS P ISO 20776-2-2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS K ISO 17491-5-2021 Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid(manikin spray test)
KS L 1672-2023 Specimen preparation for the performance test of slurry-type photocatalytic materials
KS M ISO 179-1-2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Atomization Performance Tester

GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test
GB/T 34243-2017 Test method for pervaporation dehydration membranes

Chongqing Provincial Standard of the People's Republic of China, Atomization Performance Tester

DB50/T 628-2015 Test method for metrological performance of rapid pesticide residue detector

RU-GOST R, Atomization Performance Tester

GOST R 52763-2007 Climatic environment stability test methods for machines, instruments and other industrial products. Tests for exposure to salt mist
GOST R 12.4.261-2011 Occupational safety standards system. Special clothing for protection from toxic chemicals. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions

The American Road & Transportation Builders Association, Atomization Performance Tester

AASHTO T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

工业和信息化部, Atomization Performance Tester

YS/T 1186-2017 Falling sand tester for testing the wear resistance of anodized films and organic polymer films on aluminum surfaces
JB/T 13809-2020 General technical conditions for in-situ testing instruments for mechanical properties of solid materials
SJ/T 11793-2022 Test method for electrochemical properties of lithium-ion battery electrode materials

农业农村部, Atomization Performance Tester

NY/T 1860.27-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 27: Flammability of Aerosols
NY/T 3272-2018 Cotton fiber physical properties test method AFIS single fiber tester method

International Electrotechnical Commission (IEC), Atomization Performance Tester

IEC 62947:2022 Electrically operated spray seat for household and similar use - Methods for measuring the performance - General test methods of spray seats
IEC 61468:2000/AMD1:2003 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors; Amendment 1
IEC 60404-3:2002 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
IEC 60404-3:1992 Magnetic materials; part 3: methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
IEC 61468:2000 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors

Professional Standard - Aviation, Atomization Performance Tester

HB 7407-1996 Minimum performance requirements for civil aircraft carbon monoxide detectors

SG-SPRING SG, Atomization Performance Tester

SS 5 Pt.B10-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B10: Spraying Properties

RO-ASRO, Atomization Performance Tester

STAS 5924/4-1990 Winding wires. Methods of test. Chemical properties determination

AASHTO - American Association of State Highway and Transportation Officials, Atomization Performance Tester

T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
TP 122-2016 Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method

PL-PKN, Atomization Performance Tester

PN C04833-02-1986 Household chemistry products Rinsing agents Methods of test Determination of softening properties
PN M42353-1974 National Automation and Measure- ent System agnetic tacheometers e?uirements and tests
PN E88604-1988 Electrical relays Endurance tests for electrical relay contacts Specification for the charakteristics of test equipment
PN C04258-12-1991 Rubber test mixes Fluoroelastomers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-06-1986 Rubber test mixes Butadiene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-10-1987 Rubber test mixes Halogenated isobutene-isoprene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-07-1985 Rubber test mixes Chloroprene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-09-1988 Rubber test mixes Ethylene-propylene diene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN-EN ISO 179-2-2020-12 E Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO179-2:2020)
PN C89085-24-1988 Epoxy resins Methóds of testing Determination of properties of cured resins

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Atomization Performance Tester

ASHRAE LV-11-C052-2011 Air Cleaning by Photo Catalytic Oxidation: An Experimental Performance Test
ASHRAE 3941-1996 Predicting Lubricant Performance in Refrigerant Compressors: a Comparison Between Component Testing and Benchtesters
ASHRAE OR-16-C038-2016 Unitary HVAC Equipment: Performance Optimization Strategy and Field Tests
ASHRAE 173-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detectors

VDE - VDE Verlag GmbH@ Berlin@ Germany, Atomization Performance Tester

FNN LASTENHEFT EDL@ FUNKTIONSMERKMALE-2010 Testcases fuer Konformitaetstests von EDL21-Zaehlern (Funktionsmerkmale) gemaess Lastenheft EDL; Version 1.0

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Atomization Performance Tester

GJB 2241.1-2006 Test method of performance for pulsed laser rangefinders Part 1: General rules
GJB 5384.21-2005 Test methods of performance for pyrotechnic composition. Part 21: Mass concentration determination of solid smoke particles. Filter paper weighting method
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method

SAE - SAE International, Atomization Performance Tester

SAE J2992-2020 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing
SAE J2992-2015 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing

国家能源局, Atomization Performance Tester

SY/T 5613-2016 Drilling fluid testing method for physical and chemical properties of shale

Taiwan Provincial Standard of the People's Republic of China, Atomization Performance Tester

CNS 14782-2003 Manipulating industrial robots —Test equipment and metrology methods of operation for robot performance evaluation
CNS 8254-1989 Method of Exhaust Gas Test of Carburetors for Automobiles
CNS 6164-1980 Methods of Test Simplified Carbon Monoxide Testers for Automobiles

American Society of Mechanical Engineers (ASME), Atomization Performance Tester

ASME PTC 6S-1988 Performance Test Code - Steam Turbines, Simplified Procedures for Routine Tests

Professional Standard - Electron, Atomization Performance Tester

SJ/T 11499-2015 Test method for measuring electrical properties of monocrystalline silicon carbide
SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method

Standard Association of Australia （SAA）, Atomization Performance Tester

AS/NZS 61000.4.15:2012
AS 4459.13:1999 Methods of sampling and testing ceramic tiles - Determination of chemical resistance
AS 2001.2.16:1987 Methods of test for textiles - Physical tests - Determination of water repellency of textile surfaces - Spray rating test
AS 2001.2.16:1987(R2016) Methods of test for textiles - Physical tests - Determination of water repellency of textile surfaces - Spray rating test
AS/NZS 61000.4.15:2005 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Flickermeter - Function and design specifications

ETSI - European Telecommunications Standards Institute, Atomization Performance Tester

GR NFV-TST 007-2017 Network Functions Virtualisation (NFV); Testing; Guidelines on Interoperability Testing for MANO (V1.1.1)
GR NFV-TST 007-2018 Network Functions Virtualisation (NFV) Release 2; Testing; Guidelines on Interoperability Testing for MANO (V2.5.1)

Institute of Electrical and Electronics Engineers (IEEE), Atomization Performance Tester

IEEE N42.17C-1989 Performance specifications for health physics instrumentation; portable instrumentation for use in extreme environmental conditions
IEEE/ANSI N42.18-2004 American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents

IFI/FASTNR - Industrial Fastener Institute, Atomization Performance Tester

125-1987 Test Procedure for the Locking Ability Performance of Chemical Coated Lock Screws
525-1982 Test Procedure for the Locking Ability Performance of Metric Chemical Coated Lock Screws
125-1996 Test Procedure for the Performance of Chemical Coated Prevailing-Torque Screws
125-2002 Test Procedure for the Performance of Chemical Coated Prevailing-Torque Screws

CEN - European Committee for Standardization, Atomization Performance Tester

EN ISO 5801:2008 Industrial fans - Performance testing using standardized airways

Professional Standard - Energy, Atomization Performance Tester

NB/T 34004-2011 Test method for purifier of centralization biogas supply

European Telecommunications Standards Institute (ETSI), Atomization Performance Tester

ETSI GS NFV-TST 010 V 3.3.1-2021 Network Functions Virtualisation (NFV) Release 3 - Testing - API Conformance Testing Specification
ETSI GS NFV-TST 010 V 2.8.1-2021 Network Functions Virtualisation (NFV) Release 2 - Testing - API Conformance Testing Specification
ETSI GS NFV-TST 002-2016 Network Functions Virtualisation (NFV); Testing Methodology; Report on NFV Interoperability Testing Methodology (V1.1.1)

Professional Standard - Commodity Inspection, Atomization Performance Tester

SN/T 2102.2-2008 Polymerase chain reaction(PCR)for the detection of food-borne pathogens.Part 2:Performance testing for thermal cyclers

Professional Standard - Aerospace, Atomization Performance Tester

QJ 2136.4-1991 Specimens for physical and chemical re-inspection of metal materials Specified physical performance test specimens
QJ 2136.2-1991 Specimens for physical and chemical re-inspection of metallic materials specify mechanical and process performance test specimens

NL-NEN, Atomization Performance Tester

NEN 2873-1982 Testing of stony materials - Skid-resistance apparatus according Leroux and determination of surf ace frictional properties

US-CFR-file, Atomization Performance Tester

CFR 40-1065.205-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.205:Performance specifications for measurement instruments.

IT-UNI, Atomization Performance Tester

UNI 4914-1962

Canadian Standards Association (CSA), Atomization Performance Tester

CSA N288.3.4-2013 Performance testing of nuclear air-cleaning systems at nuclear facilities (First Edition)

Professional Standard - Forestry, Atomization Performance Tester

LY/T 3298-2022 Test method for natural aging performance of exterior wood coatings

NEMA - National Electrical Manufacturers Association, Atomization Performance Tester

NEMA LSD 63-2012 Measurement Methods and Performance Variation for Verification Testing of General Purpose Lamps and Systems

Association of German Mechanical Engineers, Atomization Performance Tester

VDI 4478 Blatt 1-2013 Test procedure for standardizing the definition of performance of RFID gates for use in libraries

API - American Petroleum Institute, Atomization Performance Tester

API 1033A-1997 Full Scale Performance Tests of Environmentally Acceptable Thread Compounds

海关总署, Atomization Performance Tester

SN/T 5315-2021 Photocatalytic self-cleaning ceramic performance testing method Fluorescent probe method