ZH
RU
ES

Abrasion performance tester

Abrasion performance tester, Total:380 items.

In the international standard classification, Abrasion performance tester involves: Plastics, Dentistry, Rubber, Surface treatment and coating, Products of the textile industry, Graphic technology, Construction materials, Pipeline components and pipelines, Footwear, Tyres, Textile machinery, Plant and equipment for the food industry, Wood, sawlogs and sawn timber, Paints and varnishes, Products of the chemical industry, Equipment for the metallurgical industry, Farm buildings, structures and installations, Road engineering, Linear and angular measurements, Diagnostic, maintenance and test equipment, Non-ferrous metals, Metrology and measurement in general, Nuclear energy engineering, Non-destructive testing, Ceramics, Body care equipment, Geology. Meteorology. Hydrology, Thermodynamics and temperature measurements, Telecontrol. Telemetering, Road vehicle systems, Medical equipment, Electronic tubes, Furniture, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry, Power stations in general, Road vehicles in general, Mining and quarrying, Textile auxiliary materials, Refrigerating technology, Lubricants, industrial oils and related products, Mechanical testing, Laundry appliances, Testing of metals, Farming and forestry, Paper and board, Cutting tools, Non-textile floor coverings, Waxes, bituminous materials and other petroleum products, Protection against fire, Rectifiers. Convertors. Stabilized power supply, Optics and optical measurements, Fuels, Shop fittings, Earth-moving machinery, Optoelectronics. Laser equipment, Measurement of time, velocity, acceleration, angular velocity, Air quality, Magnetic materials, Sewing machines and other equipment for the clothing industry, Gears, Industrial automation systems, Packaging materials and accessories, Kitchen equipment, Leather technology, Domestic electrical appliances in general, On-board equipment and instruments, Radiation measurements, Shipbuilding and marine structures in general, Radiation protection, Test conditions and procedures in general, Textile fibres.


International Organization for Standardization (ISO), Abrasion performance tester

  • ISO 9352:1995 Plastics - Determination of resistance to wear by abrasive wheels
  • ISO 9352:2012 Plastics - Determination of resistance to wear by abrasive wheels
  • ISO 9352:1989 Plastics; determination of resistance to wear by abrasive wheels
  • ISO 5470-1:2016 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
  • ISO 6945:1991 Rubber hoses; determination of abrasion resistance of the outer cover
  • ISO 4649:2002 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
  • ISO 8251:1987 Anodized aluminium and aluminium alloys; Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
  • ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
  • ISO 12947-1:1998 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus
  • ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
  • ISO 16001:2017 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests
  • ISO 12947-1:1998/cor 1:2002 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus; Technical Corrigendum 1
  • ISO/FDIS 14635-3 Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
  • ISO/FDIS 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

Korean Agency for Technology and Standards (KATS), Abrasion performance tester

  • KS M ISO 9352:2007 Plastics-Determination of resistance to wear by abrasive wheels
  • KS M ISO 9352:2013 Plastics — Determination of resistance to wear by abrasive wheels
  • KS M 6624-2008 Testing methods for abrasion of vulcanized rubber (Akron method)
  • KS M ISO 6945:2013 Rubber hoses－Determination of abrasion resistance of the outer cover
  • KS M ISO 6945:2008 Rubber hoses－Determination of abrasion resistance of the outer cover
  • KS F 2215-2009 Method of abrasion test for wood
  • KS L 1606-1993 Testing method for wear resistance of high performance ceramics by ball-on-disk method
  • KS B 0534-2000 Method for assessing the overall performance characteristicsof ultrasonic pulse echo testing instrument
  • KS P ISO 20776-2:2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
  • KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
  • KS C IEC 62552-3:2018 Household refrigerating appliances — Characteristics and test methods — Part 3: Energy consumption and volume
  • KS M ISO 179-2-2012(2022) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
  • KS M ISO 179-2-2012(2017) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
  • KS B ISO 9398-4:2007 Specifications for industrial laundry machines－Definitions and testing of capacity and consumption characteristics－Part 4：Washer-extractors
  • KS B 0534-2021 Methods for evaluating performance characteristics of ultrasonic pulse-echo testing systems
  • KS M ISO 179-1-2012(2017) Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
  • KS M ISO 179-1:2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
  • KS C IEC 61468:2006 Nuclear power plants－In-core instrumentation－Characteristics and test methods of self-powered neutron detectors

Professional Standard - Medicine, Abrasion performance tester

  • YY/T 0113-1993 Resistance-to-abrasion capability test method for dental compound colophony
  • YY/T 0113-2015 Dentistry.Test method for the wear resistant of dental composite resin

NZ-SNZ, Abrasion performance tester

  • AS/NZS 1580.403.2:1994 Paints and Related Materials - Methods of Test Method 403.2: Abrasion Resistance - Taber Abraser

National Metrological Technical Specifications of the People's Republic of China, Abrasion performance tester

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Abrasion performance tester

  • GB/T 1689-2014 Rubber vulcanized.Determination of abrasion resistance (Akron machine)
  • GB/T 1689-1998 Rubber vulcanized--Determination of abrasion resistance (Akron machine)
  • GB/T 12721-1991 Rubber hoses--Determination of abrasion resistance of the outer cover
  • GB/T 12721-2007 Rubber hoses.Determination of abrasion resistance of the outer cover
  • GB/T 9867-1988 Rubber--Determination of abrasion resistance using a rotating cylinderical drum device
  • GB/T 26703-2011 Determination of abrasion resistance for top piece of leather shoes.Rotation cylindrical drum method
  • GB/T 42122-2022 Rubber,vulcanized or thermoplastic—Determination of abrasion resistance（the method of Improved Lambourn test machine）
  • GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device
  • GB/T 28945-2012 Portable braking performance tester for vehicles
  • GB/T 18902-2002 Performance requirements and test methods for UHF Measuring Distance Equipment(DME)
  • GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys--Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
  • GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys--Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • GB/T 21196.1-2007 Textiles-Determination of the abrasion resistance of fabrics by the Martindale method-Part 1:Martindale abrasion testing apparatus
  • GB/T 3789.8-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum anode dissipation power and anode overload dissipation power
  • GB/T 4893.8-2023 Testing of physical and chemical properties of furniture surfaces Part 8: Determination of wear resistance
  • GB/T 3789.9-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum grid dissipation power
  • GB/T 3789.18-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of high frequency loss for interelectrode insulators
  • GB/T 4893.8-2013 Test of surface coatings of furniture.Part 8:Determination of wearability
  • GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
  • GB/T 31364-2015 Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
  • GB/T 26594-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray tube
  • GB/T 13789-2008 Methods of measurement of the magnetic properties of magnetic sheet and strip by means a single sheet tester
  • GB/T 13789-2022 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 1:Measurement of meat specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • GB/T 26592-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray apparatus
  • GB/T 26593-2011 Non-destructive testing instruments.Properties test method for performance of industrial X-ray computed tomography(CT) equipment
  • GB/T 5594.4-1985 Test methods for properties of structure ceramic used in electronic components--Test method for dielectric loss angle tangent value
  • GB/T 32095.2-2015 Performance and test methods of non-stick surface of domestic metal cooking utensils for household food.Part 2:Test specification of non-stick performance and abrasion resistance
  • GB/T 33252-2016 Nanotechnology—Performance testing for laser confocal microscope Raman spectrometers
  • GB/T 14282.3-1993 Performance requirements and test methods for ILS localizer
  • GB/T 14282.1-1993 Performance requirements and test methods for ILS glide path beacon
  • GB/T 11711-2002 Marine automatic radar plotting aids(ARPA)--Performance requirements,methods of testing and required test results

American Society for Testing and Materials (ASTM), Abrasion performance tester

  • ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
  • ASTM D4060-14 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
  • ASTM F2497-05 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
  • ASTM C501-84(2015) Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
  • ASTM D6928-10 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • ASTM F1978-12 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM C535-03 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C535-03e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C535-01 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C535-96e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C535-12 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C535-09 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C535-16 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM F1978-99 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the TaberTM Abraser
  • ASTM F1978-00e1 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the TaberTM Abraser
  • ASTM F1978-00(2007)e2 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM F1978-22 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM C131-06 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C131/C131M-14 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM D2228-04(2019) Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
  • ASTM D7918-17a Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
  • ASTM D7918-15 Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
  • ASTM D7918-17 Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
  • ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
  • ASTM D5707-11 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM D5707-98(2003)e1 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5707-98 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5707-19 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5707-16 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D6537-00(2014) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
  • ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
  • ASTM F2661-07 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
  • ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
  • ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
  • ASTM D3835-96 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
  • ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
  • ASTM D2670-95(2016) Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
  • ASTM D6774-22 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
  • ASTM D5289-07a Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
  • ASTM D5289-07 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
  • ASTM D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM E1133-86(1996)e1 Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
  • ASTM E1133-86(2016) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
  • ASTM D5867-12(2020) Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5099-08(2022) Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
  • ASTM D1735-14 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
  • ASTM D3835-02 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
  • ASTM D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
  • ASTM D5289-17 Standard Test Method for Rubber Property&x2014;Vulcanization Using Rotorless Cure Meters
  • ASTM D5289-12 Standard Test Method for Rubber Propertymdash;Vulcanization Using Rotorless Cure Meters

German Institute for Standardization, Abrasion performance tester

  • DIN EN ISO 21546:2021-02 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
  • DIN 55654:2015-08 Scratch test using a linear abrasion tester (crockmeter)
  • DIN EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
  • DIN 51350-5:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
  • DIN 6847-5:1998 Medical electron accelerator - Part 5: Constancy test of functional performance characteristics
  • DIN EN 1071-6:2008 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test; German version EN 1071-6:2007
  • DIN 51350-3:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
  • DIN EN 17432:2022-12 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing; German version EN 17432:2021
  • DIN EN 1097-1:2021-04 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval); German and English version prEN 1097-1:2021 / Note: Date of issue 2021-02-26*Intended as replacement for DIN EN 1097-1 (2011-04).
  • DIN EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003
  • DIN EN 15586:2008 Textiles - Methods of testing the fibre proof properties of fabrics: Rubbing test; German version EN 15586:2008
  • DIN EN 17432:2022 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
  • DIN EN 16838:2019-09 Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing; German version EN 16838:2019 / Note: To be replaced by DIN EN 16838 (2023-02).
  • DIN EN 16838:2023-02 Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing; German and English version prEN 16838:2023 / Note: Date of issue 2023-01-13*Intended as replacement for DIN EN 16...
  • DIN EN 1097-1:2011-04 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval); German version EN 1097-1:2011 / Note: To be replaced by DIN EN 1097-1 (2021-04).
  • DIN EN ISO 12947-1:2007 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998+Cor. 1:2002)(includes Corrigendum AC:2006); English version of DIN EN ISO 12947-1:2007-04
  • DIN 51165-1:2023-05 Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 1: Hydroabrasion testing apparatus / Note: Date of issue 2023-04-21
  • DIN EN 660-2:1999 Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test; German version EN 660-2:1999
  • DIN 43743:1977 Stabilized supply apparatus for measurement; definitions, expression and testing of performance
  • DIN EN 16838:2023 Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing; German and English version prEN 16838:2023
  • DIN EN 16838:2019 Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing
  • DIN EN 1097-9:2014-03 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test; German version EN 1097-9:2014
  • DIN ISO 16331-1:2020-09 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
  • DIN EN ISO 11125-9:2022-09 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021); German version EN ISO 11125-9:2022
  • DIN EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test; German version EN 1097-9:2014
  • DIN 51350-5:1984 Testing of lubricants; testing by the Shell four-ball tester; determination of wear characteristics for consistent lubricants
  • DIN 51350-5:2015 Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
  • DIN EN ISO 179-2:2020-09 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020); German version EN ISO 179-2:2020
  • DIN ISO 16331-1:2020 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
  • DIN EN 660-2/A1:2003 Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test; Amendment A1; German version EN 660-2:1999/A1:2003
  • DIN EN ISO 179-1:2022-05 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/DIS 179-1:2022); German and English version prEN ISO 179-1:2022 / Note: Date of issue 2022-03-25*Intended as replacement for DIN EN ISO 179-1 (2010-11).
  • DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010 / Note: To be replaced by DIN EN ISO 179-1 (2022-05).
  • DIN ISO 14635-3:2011-08 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
  • DIN EN 1097-9:2005 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test(includes Amendment A1:2005); English version of DIN EN 1097-9:1998 + A1:2005

ES-UNE, Abrasion performance tester

  • UNE-EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
  • UNE-EN 17432:2022 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
  • UNE-EN 16838:2021 Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing
  • UNE-EN ISO 11125-9:2023 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021)
  • UNE-EN ISO 179-2:2021 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)

British Standards Institution (BSI), Abrasion performance tester

  • BS EN 1097-1:1996 Tests for mechanical and physical properties of aggregates - Determination of the resistance to wear (micro-Deval)
  • BS EN ISO 21546:2020 Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
  • BS EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test
  • PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
  • BS EN 17432:2021 Packaged refrigerating units for walk-in cold rooms. Classification, performance and energy consumption testing
  • BS EN 62552-3:2020 Household refrigerating appliances. Characteristics and test methods. Energy consumption and volume
  • BS 2782-3 Method 370:1996 Methods of testing plastics - Mechanical properties - Determination of resistance to wear by abrasive wheels
  • BS ISO 12136:2011 Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
  • BS ISO 24461:2022 Textiles. Anti-mosquito performance test method using the attractive blood-feeding apparatus
  • BS EN IEC 60404-16:2018 Magnetic materials - Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
  • BS EN 1097-9:2014 Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear by abrasion from studded tyres. Nordic test
  • 23/30458202 DC BS EN 16838. Refrigerated display scooping cabinets and pozzetto for gelato. Classification, requirements, performance and energy consumption testing
  • 19/30397143 DC BS EN 17432. Packaged refrigerating units for walk-in cold rooms. Classification, performance and energy consumption testing
  • ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
  • BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
  • BS ISO 9398-3:2003 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Washing tunnels
  • BS EN 16838:2019 Tracked Changes. Refrigerated display scooping cabinets and pozzetto for gelato. Classification, requirements, performance and energy consumption testing
  • BS EN IEC 60404-3:2022 Magnetic materials - Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • BS ISO 14635-3:2023 Gears. FZG test procedures - FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
  • BS ISO 16331-1:2017 Tracked Changes. Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
  • BS ISO 14635-3:2005 Gears. FZG test procedures. FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
  • 20/30415176 DC BS ISO 24461. Textiles. Anti-mosquito performance test method using the attractive blood-feeding apparatus
  • BS 5548:1978 Specification for radiation detectors for the instrumentation and protection of nuclear reactors: characteristics and test methods
  • BS IEC 62706:2019 Radiation protection instrumentation. Recommended climatic, electromagnetic and mechanical performance requirements and methods of tests
  • BS ISO 16331-1:2012 Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
  • 21/30426139 DC BS EN 1097-1. Tests for mechanical and physical properties of aggregates - Part 1. Determination of the resistance to wear (micro-Deval)
  • BS ISO 9398-2:2003 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Batch drying tumblers
  • BS EN 50980-1:2019 Remote alcohol monitoring devices. Test methods and performance requirements - Instruments for assessment programmes
  • BS ISO 11125-9:2021 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Wear testing and performance
  • BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing

KR-KS, Abrasion performance tester

  • KS M ISO 6945-2008 Rubber hoses－Determination of abrasion resistance of the outer cover
  • KS P ISO 20776-2-2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
  • KS C IEC 62552-3-2018 Household refrigerating appliances — Characteristics and test methods — Part 3: Energy consumption and volume
  • KS M ISO 179-1-2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

Professional Standard - Chemical Industry, Abrasion performance tester

  • HG/T 2444-2012 Test method of wear performance for agricultural tyres.Double drum method
  • HG/T 2444-1993 Test method for wear resistance of agricultural tires - double drum method
  • HG/T 3590-1999 Test method of Attrition of molecular Sieve Desiccant Used in Refrigeration System

Professional Standard - Textile, Abrasion performance tester

  • FZ/T 90040.2-1992 Test method of rubbing rubber plate for carding machine Abrasion resistance (using Akron abrasion machine)
  • FZ/T 98014-2016 Martindale abrasion and pilling tester
  • FZ/T 98019-2018 Roller-type fabric pilling performance tester
  • FZ/T 98022-2021 Circular Track Method Fabric Pilling Performance Tester

Indonesia Standards, Abrasion performance tester

Group Standards of the People's Republic of China, Abrasion performance tester

  • T/ZZB 0659-2018 Martindale abrasion and pilling tester
  • T/CAIA YQ005-2018 Performance testing method of liquid chromatograph
  • T/CAIA YQ006-2018 Performance testing method of Ion chromatography
  • T/CPQS E00020-2021 Performance requirements and test methods for Eye care appliance
  • T/CMSA 0024-2021 Air negative ion measuring instrument performance test specification
  • T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
  • T/GDCKCJH 064-2022 Performance requirements and testing methods for cable plug testers
  • T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
  • T/GDCKCJH 041-2021 Performance requirements and test methods of portable adhesion tester
  • T/CIMA 0058-2022
  • T/CAIA YQ003-2016 Testing Methods for Optical/Electrical Characteristics of Linear Charge Coupled Imaging Device for Spectrometer
  • T/CMA JD009-2020 Dynamic test items and methods for portable braking performance testers
  • T/GDBX 017-2019 Low Temperature Bending Resistance Tester for Uppers of Footwear - Cold Resistance Testing Machines - Specification
  • T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
  • T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
  • T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
  • T/GDCKCJH 052-2021 Performance requirements and test method for optoelectronic integrated test instrument with integrating sphere

(U.S.) Ford Automotive Standards, Abrasion performance tester

NL-NEN, Abrasion performance tester

  • NEN 2874-1982 Testing of stony materials - Abrasion apparatus according to Amsler and determination of resistance to abrasion

The American Road & Transportation Builders Association, Abrasion performance tester

  • AASHTO T 96-2002 Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • AASHTO T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
  • AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester

SA-SASO, Abrasion performance tester

  • SASO SSA 279-1982 METHODS OF TEST FOR CONCRETE AGGREGATES PART (5) DETERMINATION OF COARSE AGGREGATE RESISTANCE TO ABRASION BY LOS ANGELES MACHINE

工业和信息化部, Abrasion performance tester

  • YS/T 1186-2017 Falling sand tester for testing the wear resistance of anodized films and organic polymer films on aluminum surfaces
  • JB/T 13809-2020 General technical conditions for in-situ testing instruments for mechanical properties of solid materials

Professional Standard - Agriculture, Abrasion performance tester

  • NY/T 2532-2013 Performance test method of the water consumption for vegetable washing machine

Professional Standard - Traffic, Abrasion performance tester

  • JT/T 685-2007 Measurer for adhesion performance of retroreflective sheeting
  • JT/T 682-2007 Measurer for resistance to impact of raised pavement markers
  • JT/T 687-2007 Measurer for liner removal performance of retroreflective sheeting

Professional Standard - Public Safety Standards, Abrasion performance tester

  • GA/T 485-2004 The portable braking performance tester for vehicles

Japanese Industrial Standards Committee (JISC), Abrasion performance tester

  • JIS H 8682-1:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings .Part 1: Abrasive-wheel-wear abrasion resistance test
  • JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
  • JIS B 7996:2018 Performance evaluation test method of automated concentration monitoring instrument of dust in flue gas
  • JIS D 1029:1979 Testing method for simplified carbon monoxide testers for automobiles
  • JIS C 2556:2015 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • JIS A 1509-5:2014 Test methods for ceramic tiles -- Part 5: Determination of resistance to body abrasion for floor tiles
  • JIS A 1509-6:2014 Test methods for ceramic tiles -- Part 6: Determination of resistance to surface abrasion for floor tiles

国家能源局, Abrasion performance tester

  • SY/T 4113.8-2020 Test methods for performance of pipeline anti-corrosion coatings Part 8: Wear resistance test
  • SH/T 0721-2016 Determination of friction and wear properties of grease using high-frequency linear vibration tester (SRV) method
  • SH/T 0944.1-2017 Determination of anti-wear properties of lubricants FE8 rolling bearing wear tester method Part 1: Lubricating oils

Professional Standard - Nuclear Industry, Abrasion performance tester

  • EJ/T 1139-2001 γ-ray radiation meters and γ-ray spectrometers used for prospecting-characteristics and test methods

Professional Standard - Machinery, Abrasion performance tester

  • JB/T 8283-1999 Methods for testing the operating characteristics of acoustic emission instrumentation
  • JB/T 5525-2011 Non-destructive testing instruments characteristics measured method for one-channel eddy current testing instrument
  • JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
  • JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection

Association Francaise de Normalisation, Abrasion performance tester

  • NF EN 17432:2021 Groupes frigorifiques prêts à monter pour chambres froides - Classification, performance et essai de consommation d'énergie
  • NF P18-650-1*NF EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1 : determination of the resistance to wear (micro-Deval).
  • NF P18-650-1:1996 Tests for mechanical and physical properties of aggregates. Part 1 : determination of the resistance to wear (micro-deval).
  • NF D74-305*NF EN 17432:2021 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
  • NF P18-650-9*NF EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9 : determination of the resistance to wear by abrasion from studded tyres - Nordic test
  • NF B10-636*NF EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester.
  • FD V03-112:2013 Produits alimentaires - Qualification des thermocycleurs pour le maintien de leurs performances - Mise en oeuvre des tests et indicateurs de performance
  • NF Q03-055:1974 Paper and board tests. Determination of abrasion resistance of paper and board (by the taber method).
  • NF D74-203*NF EN 16838:2019 Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing
  • NF EN 16838:2019 Vitrines réfrigérées de vente de glace et pozzetto - Classification, exigences, performance et essai de consommation énergétique
  • NF C28-901-16*NF EN IEC 60404-16:2018 Magnetic materials - Part 16 : methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
  • NF T51-035-2*NF EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test
  • NF P18-650-9/A1:2005 Tests for mechanical and physical properties of aggregate - Part 9 : determination of the resistance to wear by abrasion from studded tyres - Nordic test.
  • NF ISO 9959-1:1993 Machines à dessiner à commande numérique - Essai de traçage pour l'évaluation des performances - Partie 1 : traceurs de vecteurs.

SAE - SAE International, Abrasion performance tester

  • SAE J2115-2020 Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer
  • SAE J2992-2020 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing
  • SAE J2992-2015 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing

Society of Automotive Engineers (SAE), Abrasion performance tester

  • SAE J2115-2000 Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer
  • SAE J2115-1993 Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer R(2000)
  • SAE J2115-2006 Brake Performance and Wear Test Code Commercial Vehicle Inertia dynamometer

National Metrological Verification Regulations of the People's Republic of China, Abrasion performance tester

国家市场监督管理总局、中国国家标准化管理委员会, Abrasion performance tester

  • GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
  • GB/T 41356-2022 Superabrasive products—Test method for cutting performance of diamond circular saw blades
  • GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
  • GB/T 38074-2019 Standard test method for determining the friction and wear properties of manual transmission fluid using a high-frequency—Linear-oscillation（SRV）test machine
  • GB/T 39507-2020 Leather—Physical and mechanical tests—Determination of abrasion resistance：Martindale ball plate method

Military Standard of the People's Republic of China-General Armament Department, Abrasion performance tester

Professional Standard - Light Industry, Abrasion performance tester

  • QB/T 2726-2005 Leather - Physical and mechanical tests - Determination of abrasion resistance

AT-ON, Abrasion performance tester

  • OENORM EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
  • OENORM EN 1097-1-2021 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
  • OENORM EN 17694-1-2021 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow Part 1: Open channel instrumentation

CH-SNV, Abrasion performance tester

  • SN EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
  • SN EN 17432-2021 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing

Lithuanian Standards Office , Abrasion performance tester

  • LST EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
  • LST EN 1097-9-2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
  • LST EN 1097-1-2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
  • LST EN 10280+A1-2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
  • LST EN 1097-9-2002 Tests for mechanical and physical properties of aggregate - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
  • LST EN 1097-9-2002/A1-2006 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test

未注明发布机构, Abrasion performance tester

  • DIN EN ISO 12947 1:1999 Textiles – Determination of the abrasion resistance of fabrics by the Martindale method – Part 1: Martindale abrasion testing apparatus
  • DIN EN 1097-1:2003 Tests for mechanical and physical properties of aggregates — Part 1: Determination of the resistance to wear (micro-Deval)
  • DIN EN 1097-9:1998 Tests for mechanical and physical properties of aggregates — Part 9: Determination of the resistance to wear by abrasion from studded tires — Nordic test
  • DIN EN ISO 179-1:2001 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact testing

IN-BIS, Abrasion performance tester

European Committee for Standardization (CEN), Abrasion performance tester

  • EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
  • EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
  • EN 17432:2021 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
  • prEN 1097-1-2021 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
  • EN ISO 16001:2017 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests
  • prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods
  • EN ISO 12947-2:2016 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
  • EN 1097-9:1998 Tests for mechanical and physical properties of aggregates Part 9: Determination of the resistance to wear by abrasion from studded tyres Nordic test Includes Amendment A1:2005
  • prEN 17694-1-2021 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 1: Open channel instrumentation
  • EN 660-1:1999 Resilient Floor Coverings - Determination of Wear Resistance - Part 1: Stuttgart Test (Incorporates Amendment A1: 2003)

PL-PKN, Abrasion performance tester

  • PN P04605-06-1989 Wear testing of textile cloth articles Determination of the resistance to snagging
  • PN C04048-1987 Petroleum products Test for antiwear properties of hydraulic fluids in the vane pumpe (Yickers test)
  • PN E88604-1988 Electrical relays Endurance tests for electrical relay contacts Specification for the charakteristics of test equipment

Chongqing Provincial Standard of the People's Republic of China, Abrasion performance tester

  • DB50/T 628-2015 Test method for metrological performance of rapid pesticide residue detector

Professional Standard - Electricity, Abrasion performance tester

  • DL/T 1704-2017 Performance test method of desulfurization wet mill limestone pulping system

Guangdong Provincial Standard of the People's Republic of China, Abrasion performance tester

  • DB44/T 1100.3-2012 Test methods for artificial stone: Part 3 Determination of wear resistance

American National Standards Institute （ANSI), Abrasion performance tester

  • ANSI/SAE J2115-1993 Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer
  • ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector
  • ANSI/TAPPI T558 om-2010 Surface wettability and absorbency of sheeted materials using an automated contact angle tester
  • BS EN ISO 179-1:2023 Plastics. Determination of Charpy impact properties Non-instrumented impact test (British Standard)

CEN - European Committee for Standardization, Abrasion performance tester

  • EN 1097-1:1996 Tests for mechanical and physical properties of aggregates Part 1: Determination of the resistance to wear (micro-Deval) (Incorporates Amendment A1: 2003)
  • EN 16838:2019 Refrigerated display scooping cabinets and pozzetto for gelato - Classification@ requirements@ performance and energy consumption testing
  • PREN 16838-2018 Refrigerated display scooping cabinets and pozzetto for gelato - Classification@ requirements@ performance and energy consumption testing
  • EN ISO 12947-2:1998 Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown

Danish Standards Foundation, Abrasion performance tester

  • DS/EN 17432:2021 Packaged refrigerating units for walk-in cold rooms – Classification, performance and energy consumption testing
  • DS/EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
  • DS/EN 1097-9/A1:2006 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
  • DS/EN 1097-9:1998 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
  • DS/EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
  • DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

Professional Standard - Petrochemical Industry, Abrasion performance tester

  • NB/SH/T 0847-2010 Standard test method for measuring friction and wear properties of extreme pressure(EP)lubricating oils using SRV test machine
  • SH/T 0721-2002 Standard test method for measuring friction and wear properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine

Standard Association of Australia （SAA）, Abrasion performance tester

  • AS/NZS 2442.1/SUPP 3:1996 Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Pillow case (Supplement to AS/NZS 2442.1:1996)
  • AS/NZS 2442.1/SUPP 4:1996 Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Bath towel (Supplement to AS/NZS 2442.1:1996)
  • AS/NZS 2442.1/SUPP 7:1998 Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Table cloth (Supplement to AS/NZS 2442.1:1996)
  • AS/NZS 2442.1/SUPP 6:1998 Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Double bed sheet (Supplement to AS/NZS 2442.1:1996)
  • AS/NZS 61000.4.15:2012

农业农村部, Abrasion performance tester

  • NY/T 3272-2018 Cotton fiber physical properties test method AFIS single fiber tester method

AASHTO - American Association of State Highway and Transportation Officials, Abrasion performance tester

  • T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester

Professional Standard - Energy, Abrasion performance tester

  • NB/SH/T 0721-2016 Determination of Friction and Wear Properties of Lubricating Grease High Frequency Linear Vibration Tester (SRV) Method
  • NB/SH/T 0944.2-2020 Determination of anti-wear properties of lubricants FE8 Rolling bearing wear test machine method Part 2: Lubricating grease

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Abrasion performance tester

  • ASHRAE OR-16-C040-2016 Annual Performance of a Two-Speed@ Dedicated Dehumidification Heat Pump in the NIST Net-Zero Energy Residential Test Facility
  • ASHRAE 3941-1996 Predicting Lubricant Performance in Refrigerant Compressors: a Comparison Between Component Testing and Benchtesters

RU-GOST R, Abrasion performance tester

  • GOST R 8.720-2010 State system for ensuring the uniformity of measurements. Optical power meters, optical radiation sources, return loss meters and optical testers for fiber-optical transfer systems. Verification procedure
  • GOST 33252-2015 Lubricants. Determination of the coefficient of friction, resistant to wear and extreme pressure performance using SRV testing machine
  • GOST R IEC 62552-3-2018 Household refrigerating appliances. Characteristics and test methods. Part 3. Energy consumption and volume

AENOR, Abrasion performance tester

  • UNE-EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
  • UNE-EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test

VDE - VDE Verlag GmbH@ Berlin@ Germany, Abrasion performance tester

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Abrasion performance tester

  • GJB 2241.1-2006 Test method of performance for pulsed laser rangefinders Part 1: General rules

Professional Standard - Aerospace, Abrasion performance tester

  • QJ 1990.3-1990 Electrical performance test method of electrical insulating adhesives Dielectric loss angle at power frequency and high frequency
  • QJ 2220.5-1994 Test method for coating electrical insulation performance Test method for dielectric loss tangent at power frequency, audio frequency and high frequency

Taiwan Provincial Standard of the People's Republic of China, Abrasion performance tester

  • CNS 14782-2003 Manipulating industrial robots —Test equipment and metrology methods of operation for robot performance evaluation

European Committee for Electrotechnical Standardization（CENELEC）, Abrasion performance tester

  • EN IEC 60404-16:2018 Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester

International Electrotechnical Commission (IEC), Abrasion performance tester

  • IEC 61468:2000/AMD1:2003 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors; Amendment 1
  • IEC 60404-3:2002 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
  • IEC 60404-3:1992 Magnetic materials; part 3: methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
  • IEC 61468:2000 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors

Institute of Electrical and Electronics Engineers (IEEE), Abrasion performance tester

  • IEEE N42.17C-1989 Performance specifications for health physics instrumentation; portable instrumentation for use in extreme environmental conditions

Professional Standard - Commodity Inspection, Abrasion performance tester

  • SN/T 2102.2-2008 Polymerase chain reaction(PCR)for the detection of food-borne pathogens.Part 2:Performance testing for thermal cyclers

  Laser Performance Tester, Liquid Performance Tester, Mechanical performance tester, Atomization Performance Tester, Air permeability tester, Flame Performance Tester, Air Performance Tester, Battery Performance Tester, wave performance tester, performance tester, Fiber Performance Tester, Protection Performance Tester, Concentrating Performance Tester, Abrasion performance tester, Fan Performance Tester, Rubber performance tester, Shielding Performance Tester, Tester performance, Motor Performance Tester, Flame retardant performance tester.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved