ZH
RU
ES

Fiber Performance Tester

Fiber Performance Tester, Total:499 items.

In the international standard classification, Fiber Performance Tester involves: Road engineering, Linear and angular measurements, Farming and forestry, Components for aerospace construction, Fibre optic communications, Optics and optical measurements, Nuclear energy engineering, Optoelectronics. Laser equipment, Telecommunication systems, Analytical chemistry, Metrology and measurement in general, Diagnostic, maintenance and test equipment, Textile fibres, Optical equipment, Test conditions and procedures in general, Solar energy engineering, Environmental testing, Non-destructive testing, Plant and equipment for the food industry, Shipbuilding and marine structures in general, Products of the textile industry, Body care equipment, Geology. Meteorology. Hydrology, Organic chemicals, Thermodynamics and temperature measurements, Glass, Ceramics, Telecontrol. Telemetering, Lamps and related equipment, Medical equipment, Textile machinery, Particle size analysis. Sieving, Plastics, Materials for the reinforcement of composites, Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, Road vehicles in general, Mining and quarrying, Construction materials, Electronic tubes, Farm buildings, structures and installations, Photography, Reinforced plastics, Mechanical testing, Mobile services, Radiocommunications, Installations in buildings, Materials for aerospace construction, Protection against fire, Refrigerating technology, Rectifiers. Convertors. Stabilized power supply, Aerospace electric equipment and systems, Protection of and in buildings, Inorganic chemicals, Agricultural machines, implements and equipment, Earth-moving machinery, On-board equipment and instruments, Equipment for petroleum and natural gas industries, Fluid power systems, Technical drawings, Textile auxiliary materials, Insulating materials, Milk and milk products, Measurement of time, velocity, acceleration, angular velocity, Air quality, Magnetic materials, Sewing machines and other equipment for the clothing industry, Power transmission and distribution networks, Industrial automation systems, Packaging materials and accessories, Astronomy. Geodesy. Geography, Applications of information technology, Electronic display devices, Rubber, Paper and board, Radiation measurements, Radiation protection.


Professional Standard - Traffic, Fiber Performance Tester

  • JT/T 685-2007 Measurer for adhesion performance of retroreflective sheeting
  • JT/T 687-2007 Measurer for liner removal performance of retroreflective sheeting
  • JT/T 686-2007 Measureer for impact resistance of retroreflective sheeting
  • JT/T 682-2007 Measurer for resistance to impact of raised pavement markers
  • JT/T 690-2007 Test method for photonEetrie characteristics of retrordectors
  • JT/T 693-2007 Test method for daytime colorimetric properties of fluorescent retroreflective sheeting and marking materials

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Fiber Performance Tester

  • GJB 2426A-2004 Test methods for fiber optic gyroscope
  • GJB 2241.1-2006 Test method of performance for pulsed laser rangefinders Part 1: General rules
  • GJB 2241.4-2006 Test method of performance for pulsed laser rangefinders Part 4: Test of range gating area and gating accuracy
  • GJB 2241.2-2006 Test method of performance for pulsed laser rangefinders Part 2: Static test of maximum ranging, minimum ranging, range accuracy and echo ratio
  • GJB 2241.3-2006 Test method of performance for pulsed laser rangefinders Part 3: Test of angle discrimination, range discrimination and multic target designate function
  • GJB 2241.5-2006 Test method of performance for pulsed laser rangefinders Part 5: Test of dynamic tracking range accuracy, maximum ranging, all-airway echo ratio and range tracking wave gate
  • GJB 5384.16-2005 Test methods of performance for pyrotechnic composition Part 16: Determination of laser extinction coefficient

SAE - SAE International, Fiber Performance Tester

  • SAE AS16781A-2011 Fiber Optics Test Methods and Instrumentation
  • SAE J2992-2020 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing
  • SAE J2992-2015 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing

Military Standard of the People's Republic of China-General Armament Department, Fiber Performance Tester

  • GJB 2426-1995 Fiber optic gyroscope test method
  • GJB 2426A-2015 Fiber optic gyroscope test method
  • GJB 2241A-2008 Performance test method for pulse laser rangefinder
  • GJB 2241-1994 Pulse laser rangefinder performance test method
  • GJB 4262-2001 Reconnaissance low-light night vision device tactical performance test method
  • GJB 8361-2015 Parameter testing method of military laser power energy testing instrument
  • GJB 9721-2020 Fiber optic gyroscope inertial measurement device test method
  • GJB 6919-2009 Test and evaluation methods of conductorial-fibre performance
  • GJB 9770-2020 Test method for fiber optic gyro strapdown inertial navigation system for missiles
  • GJB 2408-1995 Test method for protective performance of laser protective glasses
  • GJB 9018-2017 Indoor test method for laser interference performance of smoke screen
  • GJB 10246.1-2021 Test methods for mechanical properties of fiber-reinforced airgel insulation materials Part 1: Tensile properties
  • GJB 10246.3-2021 Test methods for mechanical properties of fiber-reinforced airgel insulation materials Part 3: Bending properties
  • GJB 10246.2-2021 Test methods for mechanical properties of fiber reinforced airgel insulation materials Part 2: Compression properties
  • GJB 8684.16-2015 Pyrotechnic performance test methods Part 16: Determination of laser extinction coefficient

农业农村部, Fiber Performance Tester

  • NY/T 3272-2018 Cotton fiber physical properties test method AFIS single fiber tester method

Society of Automotive Engineers (SAE), Fiber Performance Tester

Danish Standards Foundation, Fiber Performance Tester

  • DS/EN 61744:2006 Calibration of fibre optic chromatic dispersion test sets
  • DS/IEC 61753-062-6:2008 Fibre optic interconnecting devices and passive components performance standard -- Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test
  • DS/EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
  • DS/EN 60793-1-32:2011 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
  • DS/EN 60793-1-33:2002 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
  • DS/EN 61300-3-20/Corr.:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices
  • DS/EN 61300-3-20:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices
  • DS/EN 61300-3-13:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch

Korean Agency for Technology and Standards (KATS), Fiber Performance Tester

  • KS C IEC 61744-2007(2017) Calibration of fibre optic chromatic dispersion test sets
  • KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
  • KS B 5570-2017(2022) Performance test for UV/Vis spectrophotometer
  • KS C IEC 61280-4-2:2003 Fibre optic communication subsystem basic test procedures－Part 4－2：Fiber optic cable plant－Single-mode fiber optic cable plant attenuation
  • KS B 0534-2000 Method for assessing the overall performance characteristicsof ultrasonic pulse echo testing instrument
  • KS B 5570-2017 Performance test for UV/Vis spectrophotometer
  • KS L 6803-2012(2017) Carbon fiber－Determination of the tensile properties of the single-filament specimens
  • KS L 6803-2012(2022) Carbon fiber－Determination of the tensile properties of the single-filament specimens
  • KS L 6804-2012(2017) Carbon fibre－Determination of the tensile properties of the single-filament specimens
  • KS D 8513-2003(2018)
  • KS C 6952-1993(2018)
  • KS M 3904-2005 TESTING METHOD OF PHOTOCHARACTERISTIC OF PHOTOGRAPHIC PAPER FOR GENERAL USE
  • KS M 3709-2002 TESTING METHODS FOR COMPRESSIVE PROPERTIES OF CARBON FIBER REINFORCEDPLASTICS
  • KS B ISO 13694-2015(2020) Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
  • KS B ISO 11554-2015(2020) Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics
  • KS P ISO 20776-2:2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
  • KS K 0819-2009 Test method for light blocking effect of curtain materials
  • KS D 8508-1997(2017) Test method for tensile properties of fiber reinforced metals
  • KS C IEC 62670-1:2016 Photovolatic concentrators(CPV) ― Performance testing ― Part 1: Standard conditions
  • KS F 2300-2002 Testing method for thermal resistance of glass wool heat insulating material
  • KS C IEC 60793-1-32:2020 Optical fibres — Part 1-32: Measurement methods and test procedures — Coating strippability
  • KS C IEC 60793-1-32:2014 Optical fibres — Part 1-32: Measurement methods and test procedures — Coating strippability
  • KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
  • KS K 3100-2007 Test methods for internal/external water-pressure flux of hollow fiber ultrafiltration membrane
  • KS A ISO 9959-2:2013 Numerically controlled draughting machines-Draughting test for evaluation of performance-Part 2:Monochrome raster plotters
  • KS A ISO 9959-2-2003(2008) Numerically controlled draughting machines－Draughting test for evaluation of performance－Part 2：Monochrome raster plotters
  • KS C IEC 60793-1-33:2020 Optical fibres — Part 1-33: Measurement methods and test procedures — Stress corrosion susceptibility
  • KS C IEC 60793-1-33:2014 Optical fibres — Part 1-33: Measurement methods and test procedures — Stress corrosion susceptibility
  • KS C IEC 61300-3-20:2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-20: Examinations and measurements — Directivity of fibre optic branching devices

International Electrotechnical Commission (IEC), Fiber Performance Tester

  • IEC 61744:2023 Calibration of fibre optic chromatic dispersion test sets
  • IEC 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
  • IEC 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement
  • IEC 62670-1:2013 Concentrator photovoltaic (CPV) performance testing - Part 1: Standard conditions
  • IEC 60793-1-32:2018 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
  • IEC 60793-1-33:2017 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility

ES-UNE, Fiber Performance Tester

  • UNE-EN IEC 61744:2023 Calibration of fibre optic chromatic dispersion test sets (Endorsed by Asociación Española de Normalización in July of 2023.)
  • UNE-EN 62670-2:2016 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement
  • UNE-EN 62670-3:2018 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
  • UNE-EN 61753-062-6:2008 Fibre optic interconnecting devices and passive components performance standard -- Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Outside plant environment and sequential test (Endorsed by AENOR in May of 2008.)
  • UNE-EN IEC 61853-3:2018 Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules (Endorsed by Asociación Española de Normalización in December of 2018.)
  • UNE-EN IEC 60794-1-219:2022 Optical fibre cables - Part 1-219: Generic specification - Basic optical cable test procedures - Material compatibility test, Method F19 (Endorsed by Asociación Española de Normalización in February of 2022.)
  • UNE-EN IEC 60793-1-32:2019 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
  • UNE-EN 3745-602:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity (Endorsed by AENOR in May of 2008.)
  • UNE-EN 60793-1-33:2018 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility

Association Francaise de Normalisation, Fiber Performance Tester

  • NF EN 61744:2006 Étalonnage des ensembles d'essai de la dispersion chromatique des fibres optiques
  • NF C57-370-2*NF EN 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2 : energy measurement
  • NF EN 62670-2:2015 Concentrateurs photovoltaïques (CPV) - Essai de performances - Partie 2 : mesure de l'énergie
  • NF EN 62670-3:2017 Concentrateurs photovoltaïques (CPV) - Essai de performances - Partie 3 : mesurages de performances et rapport de puissance
  • NF T25-102*NF ISO 11566:1997 Carbon fibre. Determination of the tensile properties of single-filament specimens.
  • NF C57-370-3*NF EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: performance measurements and power rating
  • NF B10-636*NF EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester.
  • NF EN 62670-1:2014 Concentrateurs photovoltaïques (CPV) - Essai de performance - Partie 1 : conditions normales
  • FD V03-112:2013 Produits alimentaires - Qualification des thermocycleurs pour le maintien de leurs performances - Mise en oeuvre des tests et indicateurs de performance
  • NF EN IEC 61853-3:2018 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 3 : caractéristiques assignées d'énergie des modules PV
  • NF C93-840-1-32:2011 Optical fibres - Part 1-32 : measurement methods and test procedures - Coating strippability.
  • NF C93-850-1-219*NF EN IEC 60794-1-219:2022 Optical fibre cables - Part 1-219 : generic specification - Basic optical cable test procedures - Material compatibility test, method F19
  • NF EN IEC 60794-1-219:2022 Câbles à fibres optiques - Partie 1-219 : spécification générique - Procédures fondamentales d'essais des câbles optiques - Essai de compatibilité des matériaux, méthode F19
  • NF C93-840-1-32*NF EN IEC 60793-1-32:2018 Optical fibres - Part 1-32 : measurement methods and test procedures - Coating strippability
  • NF EN IEC 60793-1-32:2018 Fibres optiques - Partie 1-32 : méthodes de mesure et procédures d'essai - Dénudabilité du revêtement
  • NF EN 3745-701:2003 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 701 : dénudabilité
  • NF EN 3745-407:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 407 : ininflammabilité
  • NF C93-840-1-33*NF EN 60793-1-33:2017 Optical fibres - Part 1-33 : measurement methods and test procedures - Stress corrosion susceptibility
  • NF EN 61300-3-20:2004 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-20 : examens et mesures - Directivité des dispositifs de couplage pour fibres optiques
  • NF EN 3745-411:2018 Série aérospatiale - Câbles et fibres optiques à usage aéronautique - Méthodes d'essais - Partie 411 : résistance aux fluides
  • NF C93-885*NF EN 50582:2016 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing

National Metrological Technical Specifications of the People's Republic of China, Fiber Performance Tester

  • JJF 1197-2008 Calibration Specification of Optical Fiber Chromatic Dispersion Test Sets
  • JJF 2010-2022 Calibration specification for reflective film adhesion tester
  • JJF 1428-2013 Calibration Specification of Fiber Polarization Mode Dispersion Testers
  • JJF(纺织) 050-2015 Calibration Specification for Yarn Abrasion Measuring Instrument
  • JJF(纺织) 085-2019 Calibration Specification for Fabric Water Vapor Transmission Testers
  • JJF 1534-2015 Calibration Specification for Data Network Performance Testers
  • JJF(纺织)050-2015 Calibration Specification for Yarn Abrasion Measuring Instrument
  • JJF(纺织)085-2019 Calibration Specification for Fabric Water Vapor Transmission Testers
  • JJF 1168-2007 Calibration Specification for Portable Braking Performance Tester for Motor Vehicles
  • JJF(机械) 1017-2018 Calibration specification for motor vehicle comprehensive performance tester
  • JJF(机械)1017-2018 Calibration specification for motor vehicle comprehensive performance tester
  • JJF(纺织)106-2023 Calibration Specification for General Textile Abrasion Resistance Testers
  • JJF(纺织) 076-2018 Calibration Specification for Fabrics Mace Snagging Resistance Tester
  • JJF(纺织)076-2018 Calibration Specification for Fabrics Mace Snagging Resistance Tester
  • JJF(纺织) 091-2020 Calibration Specification of Tester for Down-proof Properties of Fabrics(Tumble Test)
  • JJF(纺织) 100-2021 Calibration Specification for Textile Electrical Resistance Testers
  • JJF(纺织)100-2021 Calibration Specification for Textile Electrical Resistance Testers
  • JJF(纺织)091-2020 Calibration Specification of Tester for Down-proof Properties of Fabrics(Tumble Test)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fiber Performance Tester

  • GB/T 14075-2008 Specifications for optical fibre chromatic dispersion measuring set
  • GB/T 31364-2015 Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
  • GB/T 32266-2015 Method of performance testing for atomic fluorescence spectrometer
  • GB/T 33252-2016 Nanotechnology—Performance testing for laser confocal microscope Raman spectrometers
  • GB/T 6360-1995 Specification for laser radiation power and energy measuring equipment
  • GB/T 15972.34-2008 Specifications for optical fibre test methods.Part 34:Measurement methods and test procedures for mechanical characteristics.Fibre curl
  • GB/T 15972.30-2008 Specifications for optical fibre test methods.Part 30:Measurement methods and test procedures for mechanical characteristics.Fibre proof test
  • GB/T 8404.1-1987 Test methods for environmental properties of optical fibres--General
  • GB/T 28945-2012 Portable braking performance tester for vehicles
  • GB/T 8404.2-1987 Test methods for environmental properties of optical fibres--Temperature cycling
  • GB/T 27583-2011 Optical functional films.Determination of reflected glare
  • GB/T 15972.3-1998 Generic specification for optical fibres. Part 3: Measuring methods for mechanical characteristics
  • GB/T 15972.5-1998 Generic specification for optical fibres. Part 5: Measuring methods for environmental characteristics
  • GB/T 30983-2014 Test method for optical properties of photovoltaic glass
  • GB/T 30809-2014 UV light sources for testing properties of photocatalytic materials
  • GB/T 18902-2002 Performance requirements and test methods for UHF Measuring Distance Equipment(DME)
  • GB/T 29199-2012 Test methods for rodent resistance of optical fiber cable
  • GB/T 42222-2022 Laboratory glassware—Testing method and classification of optical uniformity
  • GB/T 15972.51-2008 Specifications for optical fibre test methods.Part 51:Measurement methods and test procedures for environmental characteristics.Dry heat
  • GB/T 15972.53-2008 Specifications for optical fibre test methods.Part 53:Measurement methods and test procedures for environmental characteristics.Water immersion
  • GB/T 15972.32-2008 Specifications for optical fibre test methods.Part 32:Measurement methods and test procedures for mechanical characteristics.Coating strippability
  • GB/T 12079-1989 Measurements of the photoelectric properties for X-ray tubes
  • GB/T 12079-2012 Measurements of the photoelectric properties for X-ray tubes
  • GB/T 15972.55-2009 Specification for optical fibre test methods.Part 55:Measurement methods and test procedures for enviromental characteristics.Hydrogen aging
  • GB/T 15972.31-2008 Specifications for optical fibre test methods.Part 31:Measurement methods and test procedures for mechanical characteristics.Tensile strength
  • GB/T 15972.50-2008 Specifications for optical fibre test methods.Part 50:Measurement methods and test procedures for environmental characteristics.Damp heat(steady state)
  • GB/T 15972.52-2008 Specifications for optical fibre test methods.Part 52:Measurement methods and test procedures for environmental characteristics.Change of temperature
  • GB/T 15972.54-2008 Specifications for optical fibre test methods.Part 54:Measurement methods and test procedures for environmental characteristics.Gamma irradiation
  • GB/T 21380-2008 Nighttime photometric performance and test method of retroreflective pedestrian markings
  • GB/T 26594-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray tube
  • GB/T 13789-2008 Methods of measurement of the magnetic properties of magnetic sheet and strip by means a single sheet tester
  • GB/T 13789-2022 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • GB/T 15972.33-2008 Specifications for optical fibre test methods.Part 33:Measurement methods and test procedures for mechanical characteristics.Stress corrosion susceptibility
  • GB/T 14760-1993 The measurement methods of transmission performances on optical fiber cable communcation systems
  • GB/T 23764-2009 Test method of photocatalytic materials for self-cleaning
  • GB/T 26592-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray apparatus
  • GB/T 7962.10-1987 Colourless optical glass test methods--Radiation stability of radiation stable
  • GB/T 26593-2011 Non-destructive testing instruments.Properties test method for performance of industrial X-ray computed tomography(CT) equipment
  • GB/T 14218-1993 Electronic lighting control equipment--Performance,Parameters and measurement methods
  • GB/T 23761-2009 Test method of photocatalytic materials for air purification
  • GB/T 15972.46-2008 Specifications for optical fibre test methods.Part 46:Measurement methods and test procedures for transmission and optical characteristics.Monitoring of changes in optical transmittance
  • GB/T 25275-2010 Test methods for optical properties and weather resistance of polarizers for liquid crystal displays (LCD)
  • GB/T 15972.40-2008 Specifications for optical fibre test methods.Part 40:Measurement methods and test procedures for transmission and optical characteristics.Attenuation
  • GB/T 15972.41-2008 Specifications for optical fibre test methods.Part 41:Measurement methods and test procedures for transmission and optical characteristics.Bandwidth
  • GB/T 30697-2014 Test methods of characteristics for spaceborne multispectral camera with wide field of view
  • GB/T 36297-2018 Field test characteristics of optical remote sensing payload
  • GB/T 23762-2020 Test method for water purification performance of photocatalytic materials
  • GB/T 14282.3-1993 Performance requirements and test methods for ILS localizer
  • GB/T 14282.1-1993 Performance requirements and test methods for ILS glide path beacon
  • GB/T 11711-2002 Marine automatic radar plotting aids(ARPA)--Performance requirements,methods of testing and required test results

National Metrological Verification Regulations of the People's Republic of China, Fiber Performance Tester

未注明发布机构, Fiber Performance Tester

  • DIN EN IEC 61290-1-1:2022 Test methods for fiber optic amplifiers – Part 1 1: Optical performance and gain parameters – Optical spectrum analyzer method
  • BS ISO 11566:1996(1998) Carbon fibre — Determination of the tensile properties of single - filament specimens
  • BS EN 3745-703:2005(2006) Fibres and cables, optical, aircraft use — Test methods — Part 703 : Durability of manufacturer’s marking

(U.S.) Telecommunications Industries Association , Fiber Performance Tester

  • TIA TSB-143-2007 Fiber Optic Power Meters: Measurement and Application Issues
  • TIA/EIA-455-69A-1991 FOTP-69 Test Procedure for Evaluating the Effect of Minimum and Maximum Exposure Temperatures on the Optical Performance of Optical Fibers
  • TIA/EIA-455-225-2002 FOTP-225 IEC-61745 End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets
  • TIA/EIA-455-209-2000 FOTP-209 IEC 61290-2-1 Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer
  • TIA TSB-140-2004 Additional Guidelines for Field- Testing Length, Loss and Polarity of Optical Fiber Cabling Systems Contains Color
  • TIA/EIA-455-206-2000 FOTP-206 IEC 61290-1-1 Optical Fibre Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters - Optical Spectrum Analyzer
  • TIA-455-C-2014 General requirements for standard test procedures for optical fibers, cables, transducers, sensors, connecting and terminating devices, and other fiber optic components

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Fiber Performance Tester

  • IEEE 1591.1-2012 Testing and Performance of Hardware for Optical Ground Wire (OPGW)
  • IEEE 952-1997 Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
  • IEEE 1526-2003 Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems

Group Standards of the People's Republic of China, Fiber Performance Tester

  • T/CAIA YQ003-2016 Testing Methods for Optical/Electrical Characteristics of Linear Charge Coupled Imaging Device for Spectrometer
  • T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
  • T/CAIA YQ005-2018 Performance testing method of liquid chromatograph
  • T/CAIA YQ006-2018 Performance testing method of Ion chromatography
  • T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
  • T/GDCKCJH 052-2021 Performance requirements and test method for optoelectronic integrated test instrument with integrating sphere
  • T/CANSI 41-2021 Requirements and methods for performance testing of Marine optical fiber link
  • T/CPQS E00020-2021 Performance requirements and test methods for Eye care appliance
  • T/CMSA 0024-2021 Air negative ion measuring instrument performance test specification
  • T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
  • T/CSA 071-2022 Performance test method of flexible light source in optical medical equipment
  • T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
  • T/GDCKCJH 064-2022 Performance requirements and testing methods for cable plug testers
  • T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
  • T/CSTM 00443-2023 Test method of the tensile properties of single fiber—Balance method
  • T/GDCKCJH 041-2021 Performance requirements and test methods of portable adhesion tester
  • T/GAMA 29-2023 Optical performance testing method for 3D printed UV projectors
  • T/CIMA 0058-2022
  • T/NJ 1263-2021 Laser brake performance tester for agricultural and forestry tractors and self-propelled machinery
  • T/GDCKCJH 025-2020 Determination method for performance parameters of distributed fiber temperature / strain / vibration sensor
  • T/CMA JD009-2020 Dynamic test items and methods for portable braking performance testers
  • T/GDBX 017-2019 Low Temperature Bending Resistance Tester for Uppers of Footwear - Cold Resistance Testing Machines - Specification
  • T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
  • T/ZSA 18-2020 Measuring method of viewing field optical characteristic for liquid crystal display devices

Professional Standard - Aviation, Fiber Performance Tester

  • HB 8618-2021 Performance testing requirements for fiber Bragg grating strain sensors used in aviation

Lithuanian Standards Office , Fiber Performance Tester

  • LST EN 61744-2006 Calibration of fibre optic chromatic dispersion test sets (IEC 61744:2005)
  • LST EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000)
  • LST EN 61753-062-6-2008 Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test (IEC 61753-062-6:2007)
  • LST EN 10280+A1-2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
  • LST EN ISO 13694:2000/AC:2008 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000/Cor 1:2005)

Professional Standard - Post and Telecommunication, Fiber Performance Tester

  • YD/T 903-1997 Technical conditions of mode field diameters for optical fibers
  • YD/T 598-1992 Technical conditions of mono-mode optical fiber time-domain reflectoscopes
  • YD/T 515-1992 Technical conditions for multimode optical fiber frequency-domain bandwidth tester
  • YD/T 1588.2-2006 Measurement methods for characteristics of optical fibre cable line. Part 2: Optical fibre splice loss
  • YD/T 1154-2001 Performance requirements and test methods of Erbium-Doped Fiber-Amplifier for Single-channel applications

German Institute for Standardization, Fiber Performance Tester

  • DIN EN 61744:2006-10 Calibration of fibre optic chromatic dispersion test sets (IEC 61744:2005); German version EN 61744:2005 / Note: DIN EN 61744 (2002-01) remains valid alongside this standard until 2008-09-01.*To be replaced by DIN EN IEC 61744 (2021-07).
  • DIN ISO 16331-1:2020-09 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
  • DIN 58142:2006 Testing of fibre optic elements - Determination of the resistance against environmental conditions
  • DIN EN IEC 61744:2021-07 Calibration of fibre optic chromatic dispersion test sets (IEC 86/569/CD:2020); Text in English / Note: Date of issue 2021-06-04*Intended as replacement for DIN EN 61744 (2006-10).
  • DIN ISO 16331-1:2020 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
  • DIN EN IEC 61744:2021 Calibration of fibre optic chromatic dispersion test sets (IEC 86/569/CD:2020); Text in English
  • DIN 6847-5:1998 Medical electron accelerator - Part 5: Constancy test of functional performance characteristics
  • DIN EN 15586:2008-09 Textiles - Methods of testing the fibre proof properties of fabrics: Rubbing test; German version EN 15586:2008
  • DIN EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003
  • DIN EN 61753-062-6:2008-09 Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test (IEC 61753-062-6:2007); German ver...
  • DIN 43743:1977 Stabilized supply apparatus for measurement; definitions, expression and testing of performance
  • DIN EN 3745-701:2002-12 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability; German and English version EN 3745-701:2002
  • DIN EN 15586:2008 Textiles - Methods of testing the fibre proof properties of fabrics: Rubbing test; German version EN 15586:2008
  • DIN 10478:2003 Determination of ingredients of raw milk using infra-red spectrophotometry - Function test of the instruments
  • DIN EN 3745-412:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance; German and English version EN 3745-412:2005

American National Standards Institute （ANSI), Fiber Performance Tester

  • ANSI/EIA/TIA 455-186:1991 Proposed New FOTP, Gauge Retention Force Measurement for the Fiber Optic Components
  • BS EN IEC 61744:2023 Tracked Changes. Calibration of fibre optic chromatic dispersion test sets
  • ANSI/ASME B89.1.8-2011 Performance Evaluation of Displacement-Measuring Laser Interferometers
  • ANSI/TIA/EIA 455-221-2001 Optical Fiber Amplifiers - Basic Specification - Part 5 -1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer
  • ANSI PH3.619-1988 Photography (Optics) - Rangefinders and Other Focusing Aids - Performance Specifications
  • ANSI T1.231.04-2003 SONET - Layer 1 In-Service Digital Transmission Performance Monitoring
  • ANSI/ATIS 0300231.04-2013 SONET - Layer 1 In-Service Digital Transmission Performance Monitoring
  • ANSI/ASHRAE 93-2003 Solar Collectors, Method of Testing to Determine the Thermal Performance of
  • ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector
  • ANSI/TIA/EIA 455-209-2000 FOTP209 - IEC 61290-2-1 - Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer
  • ANSI/TIA-455-209-2000 FOTP209 - IEC 61290-2-1 - Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer
  • ANSI/EIA/TIA 455-69A:1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers
  • ANSI/IEEE 1526:2020 Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
  • ANSI/TIA/EIA 455-206-2000 FOTP206 - IEC 61290-1-1 - Optical Fiber Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters - Optical Spectrum Analyzer
  • ANSI/TIA-455-206-2000 FOTP206 - IEC 61290-1-1 - Optical Fiber Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters - Optical Spectrum Analyzer
  • ANSI/TIA/EIA 455-210-2000 FOTP210-IEC 61290-2-2 - Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer
  • ANSI/TAPPI T558 om-2010 Surface wettability and absorbency of sheeted materials using an automated contact angle tester

British Standards Institution (BSI), Fiber Performance Tester

  • 20/30425193 DC BS EN IEC 61744. Calibration of fibre optic chromatic dispersion test sets
  • 21/30442040 DC BS EN IEC 61744. Calibration of fibre optic chromatic dispersion test sets
  • BS ISO 16331-1:2017 Tracked Changes. Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
  • BS ISO 16331-1:2012 Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
  • BS EN 61290-2-3:1998 Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Optical power meter
  • BS ISO 11421:1997 Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement
  • BS EN 62670-2:2015 Photovoltaic concentrators (CPV). Performance testing. Energy measurement
  • BS EN 61280-4-2:2000 Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation
  • BS EN 62670-3:2017 Photovoltaic concentrators (CPV). Performance testing. Performance measurements and power rating
  • BS EN 62343-3-2:2016 Dynamic modules. Performance specification templates. Optical channel monitor
  • BS EN 60793-1-32:2011 Optical fibres. Measurement methods and test procedures. Coating strippability
  • BS EN 60793-1-32:2010 Optical fibres. Measurement methods and test procedures. Coating strippability
  • BS EN IEC 60794-1-219:2022 Optical fibre cables - Generic specification. Basic optical cable test procedures. Material compatibility test, method F19
  • BS EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1:Noise figure parameters - Optical spectrum analyzer method
  • BS EN 61290-3-1:2004 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
  • PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
  • BS EN IEC 61853-3:2018 Photovoltaic (PV) module performance testing and energy rating - Energy rating of PV modules
  • BS EN 60793-1-32:2004 Optical fibres - Measurement methods and test procedures - Coating strippability
  • BS EN 60793-1-32:2003 Optical fibres - Part 1-32:Measurement methods and test procedures - Coating strippability
  • BS ISO 14133-2:2006 Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - High performance instruments
  • BS EN IEC 60793-1-32:2018 Tracked Changes. Optical fibres. Measurement methods and test procedures. Coating strippability
  • BS ISO 12136:2011 Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
  • BS ISO 24461:2022 Textiles. Anti-mosquito performance test method using the attractive blood-feeding apparatus
  • BS EN 61300-3-13:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Control stability of a fibre optic switch
  • BS EN 61300-3-20:2002 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Directivity of fibre optic branching devices
  • BS EN 3745-412:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
  • BS EN IEC 60404-16:2018 Magnetic materials - Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
  • BS EN 62670-1:2014 Photovoltaic concentrators (CPV). Performance testing. Standard conditions
  • BS EN 61300-3-8:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Ambient light susceptibility
  • ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
  • BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
  • BS EN 61300-2-4:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention
  • BS EN IEC 60794-1-310:2022 Optical fibre cables - Generic specification. Basic optical cable test procedures. Cable element test methods. Strippability, method G10
  • BS EN 61300-2-45:1999 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Durability test by water immersion
  • BS EN 60793-1-33:2017 Tracked Changes. Optical fibres. Measurement methods and test procedures - Stress corrosion susceptibility
  • BS EN 60811-501:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
  • BS EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
  • BS EN IEC 60404-3:2022 Magnetic materials - Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • BS EN IEC 61300-2-56:2020 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Tests. Wind resistance of mounted housing
  • BS EN 61300-3-19:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependence of return loss of a single-mode fibre optic component
  • 20/30415176 DC BS ISO 24461. Textiles. Anti-mosquito performance test method using the attractive blood-feeding apparatus
  • BS 5548:1978 Specification for radiation detectors for the instrumentation and protection of nuclear reactors: characteristics and test methods
  • BS EN 2591-6318:2002 Elements of electrical and optical connection. Test methods - Optical elements. Fire resistance
  • BS IEC 62706:2019 Radiation protection instrumentation. Recommended climatic, electromagnetic and mechanical performance requirements and methods of tests

RU-GOST R, Fiber Performance Tester

  • GOST R 8.720-2010 State system for ensuring the uniformity of measurements. Optical power meters, optical radiation sources, return loss meters and optical testers for fiber-optical transfer systems. Verification procedure
  • GOST R ISO 17123-4-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 4. Elektro-optical distance meters (EDM instruments)
  • GOST R ISO 17123-7-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 7. Optical plumbing instruments
  • GOST R ISO 17123-5-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 5. Electronic tacheometers
  • GOST 8.608-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of chromatic dispersion in optical fiber
  • GOST R ISO 17123-6-2011 State system for ensuring the uniformity of meansurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 6. Rotating lasers
  • GOST R ISO 17123-2-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 2. Levels
  • GOST R ISO 17123-3-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 3. Theodolites
  • GOST R ISO 13694-2010 Optics and optical instruments. Laser and laser-related equipment. Test methods for laser beam power (energy) density distribution
  • GOST 8.607-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of polarization mode dispersion in optical fiber
  • GOST R ISO 17123-1-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
  • GOST R IEC 60793-1-32-2010 Optical fibres. Part 1-32. Measurement methods and test procedures. Coating strippability

Institute of Electrical and Electronics Engineers (IEEE), Fiber Performance Tester

  • IEEE Std 1591.1-2012 IEEE Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)
  • IEEE P1591.1/D5, May 2023 IEEE Draft Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)
  • IEEE P1591.1/D6, June 2023 IEEE Draft Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)
  • IEEE P1591.1/D4, December 2022 IEEE Draft Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)
  • IEEE P1591.1/D2, March 2011 IEEE Draft Standard for Testing and Performance of Hardware for Optical Groundwire (OPGW)
  • IEEE P1591.1 IEEE Draft Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)
  • IEEE 952-2020 IEEE Standard for Specifying and Testing Single-Axis Interferometric Fiber Optic Gyros
  • IEEE Std 952-2020 IEEE Standard for Specifying and Testing Single-Axis Interferometric Fiber Optic Gyros
  • IEEE Std 952-1997 IEEE Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
  • IEEE P952/D08, June 2020 IEEE Draft Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
  • IEEE P952/D07, June 2020 IEEE Draft Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
  • IEEE P952/D06, February 2020 IEEE Draft Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
  • IEEE 1526-2020 Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
  • IEEE 1138-2009 Standard for testing and performance for Optical Ground Wire (OPGW) for use on electric utility power lines
  • IEEE P952/D09, June 2020 IEEE Approved Draft Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros
  • IEEE Std 1526-2003 IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
  • IEEE Std 1526-2020 IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems

American Society for Testing and Materials (ASTM), Fiber Performance Tester

  • ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM E1866-97(2007) Standard Guide for Establishing Spectrophotometer Performance Tests
  • ASTM E1866-97(2002) Standard Guide for Establishing Spectrophotometer Performance Tests
  • ASTM E1866-97 Standard Guide for Establishing Spectrophotometer Performance Tests
  • ASTM D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-12(2020) Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-12 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
  • ASTM D5867-12e1 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
  • ASTM E1683-02(2007) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM E1683-02 Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM E1683-95A Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM D6500-00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E1866-97(2021) Standard Guide for Establishing Spectrophotometer Performance Tests
  • ASTM D6500-00(2006) Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
  • ASTM D6500-00 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
  • ASTM D4018-17 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
  • ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
  • ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM D6466-99(2005) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
  • ASTM D6466-99 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
  • ASTM D6625-01(2007) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
  • ASTM D6625-01 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
  • ASTM D6537-00(2014) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
  • ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
  • ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
  • ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
  • ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry

国家市场监督管理总局、中国国家标准化管理委员会, Fiber Performance Tester

  • GB/T 15972.34-2021 Specifications for optical fibre test methods—Part 34: Measurement methods and test procedures for mechanical characteristics—Fibre curl
  • GB/T 15972.30-2021 Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test
  • GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
  • GB/T 15972.32-2021 Specifications for optical fibre test methods—Part 32： Measurement methods and test procedures for mechanical characteristics—Coating strippability
  • GB/T 39585-2020 Opto-electronic measurement—Performance requirements and test methods of light distribution measurement system
  • GB/T 33779.3-2021 Guidance for special characteristic of optical fibre—Part 3: Effective area (Aeff)
  • GB/T 15972.54-2021 Specifications for optical fibre test methods—Part 54: Measurement methods and test procedures for environmental characteristics—Gamma irradiation
  • GB/T 15972.31-2021 Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength
  • GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
  • GB/T 14218-2018 Electronic lighting control equipment performance parameters and measurement methods
  • GB/T 37240-2018 Test and evaluation methods for light transmission property of cover glass for crystalline silicon photovoltaic module

American Society of Mechanical Engineers (ASME), Fiber Performance Tester

International Organization for Standardization (ISO), Fiber Performance Tester

  • ISO 16331-1:2012 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
  • ISO 16331-1:2017 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
  • ISO 11566:1996 Carbon fibre - Determination of the tensile properties of single-filament specimens
  • ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
  • ISO 12136:2011 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
  • ISO 16001:2017 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests
  • ISO 14133-2:2006 Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 2: High performance instruments

Professional Standard - Public Safety Standards, Fiber Performance Tester

  • GA/T 485-2004 The portable braking performance tester for vehicles

Hunan Provincial Standard of the People's Republic of China, Fiber Performance Tester

  • DB43/T 1776-2020 Test method for main parameters of high energy continuous fiber laser

Professional Standard - Nuclear Industry, Fiber Performance Tester

  • EJ/T 1139-2001 γ-ray radiation meters and γ-ray spectrometers used for prospecting-characteristics and test methods

Professional Standard - Machinery, Fiber Performance Tester

  • JB/T 8283-1999 Methods for testing the operating characteristics of acoustic emission instrumentation
  • JB/T 5525-2011 Non-destructive testing instruments characteristics measured method for one-channel eddy current testing instrument
  • JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
  • JB/T 10875-2008 Measuring methods for optical properties of LEDs
  • JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection

International Telecommunication Union (ITU), Fiber Performance Tester

  • ITU-T L.68-2007 Optical fibre cable maintenance support, monitoring and testing system for optical fibre cable networks carrying high total optical power (Study Group 6)
  • ITU-T G.650.1 FRENCH-2004 Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable D閒initions et methodes de test applicables aux attributs lineaires deterministes des fibres et cables optiques monomodes
  • ITU-T G.650.1 SPANISH-2004 Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable Definiciones y metodos de prueba de los atributos lineales y determin韘ticos de fibras y cables monomodo
  • ITU-T L.125-1992 Measurement method to determine the tensile performance of optical fibre cables under load

Indonesia Standards, Fiber Performance Tester

Professional Standard - Textile, Fiber Performance Tester

  • FZ/T 20026-2013 Test method for fibre length and diameter of wool top & slivers.Optical analyser
  • FZ/T 98019-2018 Roller-type fabric pilling performance tester
  • FZ/T 98022-2021 Circular Track Method Fabric Pilling Performance Tester
  • FZ/T 50047-2019 Test method for heat resistance, ultraviolet radiation resistance and acid resistance of polyimide fiber

US-TIA_EIA, Fiber Performance Tester

  • TIA_EIA-455-69A-1991 FOTP-69 Test Procedure for Evaluating the Effect of Minimum and Maximum Exposure Temperatures on the Optical Performance of Optical Fibers

European Committee for Electrotechnical Standardization（CENELEC）, Fiber Performance Tester

  • EN 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement
  • EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
  • EN 62670-1:2014 Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions
  • EN 50582:2016 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing

GB-REG, Fiber Performance Tester

工业和信息化部, Fiber Performance Tester

  • YD/T 1588.2-2020 Optical cable line performance measurement methods Part 2: Optical fiber connector loss
  • YD/T 1154-2015 Performance requirements and test methods for erbium-doped fiber amplifiers for single channel use
  • YD/T 3022.2-2016 Test methods for mechanical properties of communication optical cables Part 2: Compressive displacement of coated optical fibers in patch cables
  • JB/T 13809-2020 General technical conditions for in-situ testing instruments for mechanical properties of solid materials

TIA - Telecommunications Industry Association, Fiber Performance Tester

  • EIA/TIA-455-69A-1991 FOTP-69 Test Procedure for Evaluating the Effect of Minimum and Maximum Exposure Temperatures on the Optical Performance of Optical Fibers

ES-AENOR, Fiber Performance Tester

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fiber Performance Tester

  • GB/T 33779.1-2017 Guidance for special characteristics of optical fibre—Part 1: Attenuation uniformity
  • GB/T 34520.5-2017 Test methods for continuous silicon carbide fiber—Part 5：Tensile properties of single-filament fiber
  • GB/T 35378-2017 Testing methods for tensile mechanical properties of plant short individual fibers
  • GB/T 33779.2-2017 Guidance for special characteristic of optical fibre—Part 2: Interpretation of OTDR backscattering traces

Japanese Industrial Standards Committee (JISC), Fiber Performance Tester

  • JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
  • JIS K 7105:1981 Testing methods for optical properties of plastics
  • JIS C 6122-1-1:2011 Optical amplifiers -- Test methods -- Part 1-1: Power and gain parameters -- Optical spectrum analyzer method
  • JIS K 7073:1988 Testing method for tensile properties of carbon fiber reinforced plastics
  • JIS K 7074:1988 Testing methods for flexural properties of carbon fiber reinforced plastics
  • JIS B 7996:2018 Performance evaluation test method of automated concentration monitoring instrument of dust in flue gas
  • JIS D 1029:1979 Testing method for simplified carbon monoxide testers for automobiles
  • JIS C 2556:2015 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • JIS C 6122-1-2:2011 Optical amplifiers -- Test methods -- Part 1-2: Power and gain parameters -- Electrical spectrum analyzer method
  • JIS C 61300-3-43:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-43: Examinations and measurements -- Mode transfer function measurement for fiber optic sources
  • JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

CENELEC - European Committee for Electrotechnical Standardization, Fiber Performance Tester

  • EN 61290-2-1:1998 Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters Optical Spectrum Analyzer
  • EN 61290-1-1:1998 Optical Fibre Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters Optical Spectrum Analyzer
  • EN 61290-2-2:1998 Optical Fibre Amplifiers - Basic Specification Part 2-2: Test Methods for Optical Power Parameters Electrical SPectrum Analyzer
  • EN 60793-1-32:2003 Optical fibres Part 1-32: Measurement methods and test procedures Coating strippability
  • EN 60793-1-32:2010 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability

IN-BIS, Fiber Performance Tester

SE-SIS, Fiber Performance Tester

  • SIS SS 64 12 50-1981 Measurement in building - Laser direction and laser surface indicating device - Function and testing

Chongqing Provincial Standard of the People's Republic of China, Fiber Performance Tester

  • DB50/T 628-2015 Test method for metrological performance of rapid pesticide residue detector

Professional Standard - Aerospace, Fiber Performance Tester

  • QJ 971A-2011 Test method of tensile properties for small speciments of fiber-reinforced plastics
  • QJ 971-1986 Test method for tensile properties of small specimens of fiber-reinforced plastics

The American Road & Transportation Builders Association, Fiber Performance Tester

  • AASHTO T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
  • AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester

Professional Standard - Agriculture, Fiber Performance Tester

  • NY/T 1936-2010 Test method for daylighting perfermance of gutter connected greenhouses

Jilin Provincial Standard of the People's Republic of China, Fiber Performance Tester

KR-KS, Fiber Performance Tester

  • KS P ISO 20776-2-2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
  • KS C IEC 60793-1-32-2020 Optical fibres — Part 1-32: Measurement methods and test procedures — Coating strippability
  • KS L 1672-2023 Specimen preparation for the performance test of slurry-type photocatalytic materials
  • KS C IEC 60793-1-33-2020 Optical fibres — Part 1-33: Measurement methods and test procedures — Stress corrosion susceptibility
  • KS C IEC 61300-3-20-2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-20: Examinations and measurements — Directivity of fibre optic branching devices

Taiwan Provincial Standard of the People's Republic of China, Fiber Performance Tester

  • CNS 14178-1998 Measurement methods for the performance of digital transmitter and receiver modules used for optical fiber communication
  • CNS 14782-2003 Manipulating industrial robots —Test equipment and metrology methods of operation for robot performance evaluation
  • CNS 14181-1998 Measurement methods for the performance of analog video laser transmitter and receiver modules used for optical fiber communication

AASHTO - American Association of State Highway and Transportation Officials, Fiber Performance Tester

  • T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester

AENOR, Fiber Performance Tester

  • UNE-EN 62670-1:2014 Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions
  • UNE-EN 61300-3-13:1999 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-13: EXAMINATIONS AND MEASUREMENTS. CONTROL STABILITY OF A FIBRE OPTIC SWITCH.
  • UNE-EN 61300-3-20:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices.

海关总署, Fiber Performance Tester

  • SN/T 5315-2021 Photocatalytic self-cleaning ceramic performance testing method Fluorescent probe method

Professional Standard - Light Industry, Fiber Performance Tester

  • QB/T 2515-2001 Methods of measurement for the electrical and photometric performance of metal halide lamps

Professional Standard - Electron, Fiber Performance Tester

  • SJ/T 11870-2022 Performance test methods for light sensors used in lighting
  • SJ/T 11834-2022 Optical performance test method for automotive head-up displays
  • SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method
  • SJ 816-1974 Methods of measurement for the resetting performance of glow discharge counting tubes

European Telecommunications Standards Institute (ETSI), Fiber Performance Tester

  • ETSI I-ETS 300 783-1998 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optic Fusion Splices for Single-Mode Optical Fibre Transmission Systems; Common Requirements and Conformance Testing
  • ETSI I-ETS 300 671-1996 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optical Connectors for Single-Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing
  • ETSI PRI-ETS 300 783-1998 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optic Fusion Splices for Single-Mode Optical Fibre Transmission Systems; Common Requirements and Conformance Testing
  • ETSI PRI-ETS 300 783-1996 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optic Fusion Splices for Single-Mode Optical Fibre Transmission Systems; Common Requirements and Conformance Testing
  • ETSI PRI-ETS 300 671-1996 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optical Connectors for Single-Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing
  • ETSI PRI-ETS 300 671-1995 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optical Connectors for Single-Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing
  • ETSI ES 200 671-2000 Transmission and Multiplexing (TM); Passive Optical Components; Optical Fibre Connectors for Single Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing
  • ETSI ES 201 792-2000 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optic Patchcords for Single Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing (V1.1.1)
  • ETSI TS 100 671-2004 Transmission and Multiplexing (TM); Passive optical components; Optical fibre connectors for single mode optical fibre communication systems; Common requirements and conformance testing (V1.3.1)

European Committee for Standardization (CEN), Fiber Performance Tester

  • EN ISO 16001:2017 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests
  • EN 3745-412:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
  • prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods

European Association of Aerospace Industries, Fiber Performance Tester

  • AECMA PREN 3745-412-1999 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 412: Humidity Resistance Edition P 1

VDE - VDE Verlag GmbH@ Berlin@ Germany, Fiber Performance Tester

PL-PKN, Fiber Performance Tester

  • PN E88604-1988 Electrical relays Endurance tests for electrical relay contacts Specification for the charakteristics of test equipment

Sichuan Provincial Standard of the People's Republic of China, Fiber Performance Tester

  • DB51/T 1999-2015 Requirements and test methods for electrical degradation performance of solar photovoltaic modules

Henan Provincial Standard of the People's Republic of China, Fiber Performance Tester

  • DB41/T 1277-2016 Technical specifications for performance testing of grid-connected photovoltaic power generation systems

能源, Fiber Performance Tester

  • NB/T 32026-2015 Photovoltaic power station grid-connected performance testing and evaluation methods

ETSI - European Telecommunications Standards Institute, Fiber Performance Tester

  • PRI-ETS 300 671-1995 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optical Connectors for Single-Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing
  • I-ETS 300 671-1996 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optical Connectors for Single-Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing
  • ES 201 792-2000 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optic Patchcords for Single Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing (V1.1.1)
  • PRI-ETS 300 671-1996 Transmission and Multiplexing (TM); Passive Optical Components; Fibre Optical Connectors for Single-Mode Optical Fibre Communication Systems; Common Requirements and Conformance Testing

ZA-SANS, Fiber Performance Tester

  • SANS 60793-1-32:2001 Optical fibres Part 1-32: Measurement methods and test procedures - Coating strippability

  Laser Performance Tester, Liquid Performance Tester, Mechanical performance tester, Atomization Performance Tester, Air permeability tester, Flame Performance Tester, Air Performance Tester, Battery Performance Tester, wave performance tester, performance tester, Fiber Performance Tester, Protection Performance Tester, Fiber Loss Tester, Concentrating Performance Tester, Abrasion performance tester, Bending performance tester, Fiber Tester, Fan Performance Tester, Fiber Tester, Motor Performance Tester.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved