ZH
RU
ES
molecular weight polymer
molecular weight polymer, Total:88 items.
In the international standard classification, molecular weight polymer involves: Plastics, Rubber, Analytical chemistry, Protection against dangerous goods, Raw materials for rubber and plastics, Environmental protection.
American National Standards Institute （ANSI), molecular weight polymer
- ANSI/ASTM D5576:2000 Classification for System and Basis for Specification of Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Materials (08.03)
- ANSI/ASTM D4322:1996 Test Method for Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
GOSTR, molecular weight polymer
- GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
- GOST R 57268.5-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 5. Method using light-scattering detection
Professional Standard - Petrochemical Industry, molecular weight polymer
- SH/T 1759-2007 Determinaaonof the molecular.mass distribution of solution polpners by gel permeation chromatography
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, molecular weight polymer
- GB/T 31816-2015 Water treatment chemicals.Determination of the molecular weight and molecular weight distribution of polymers.Gel filtration chromatography
- GB/T 27843-2011 Chemicals.Determination of the low molecular weight content of a polymer using Gel permeation chromatography (GPC)
- GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
- GB/T 36214.2-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 2:Universal calibration method
- GB/T 41638.2-2023 Carbon and environmental footprints of plastics Bio-based plastics Part 2: Carbon footprint of materials Amount (mass) of CO2 incorporated into polymer molecules from the air
American Society for Testing and Materials (ASTM), molecular weight polymer
- ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
- ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
- ASTM D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
- ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
Association Francaise de Normalisation, molecular weight polymer
- NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
- NF EN ISO 16014-5:2019 Plastiques - Détermination de la masse moléculaire moyenne et de la distribution des masses moléculaires de polymères par chromatographie d'exclusion stérique - Partie 5 : méthode par diffusion lumineuse
- XP CEN/TS 14577:2004 Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Additifs polymériques - Méthode d'essai pour la détermination de la fraction massique d'un additif polymérique de masse moléculaire inférieure à 1000 daltons
- NF EN ISO 10927:2018 Plastiques - Détermination de la masse moléculaire et de la distribution des masses moléculaires des polymères par spectrométrie de masse, à temps de vol, après désorption/ionisation laser assistée par matrice (SM-MALDI-TOF)
- NF T51-240-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5 : method using light-scattering method.
- NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
- NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
- NF T51-798-2*NF EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2 : material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
HU-MSZT, molecular weight polymer
Korean Agency for Technology and Standards (KATS), molecular weight polymer
- KS M ISO 11344:2007 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
- KS M ISO 11344:2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
- KS M ISO 11344-2017(2022) Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KR-KS, molecular weight polymer
- KS M ISO 11344-2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
International Organization for Standardization (ISO), molecular weight polymer
- ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
- ISO 11344:2016 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
- ISO 11344:2004/Cor 1:2008 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography; Technical Corrigendum 1
- ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
- ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
- ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
- ISO 16014-1:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
- ISO 16014-5:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
- ISO 16014-2:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
- ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
- ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
- ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
- ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
- ISO 16014-1:2003/Cor 1:2005 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles; Technical Corrigendum 1
German Institute for Standardization, molecular weight polymer
- DIN 55674:2006 Synthetic Polymers - Determination of molecular mass and molecular mass distribution of polymers by matrix assisted laser desorption/ionization-time-of-flight-mass spectrometry
- DIN EN ISO 16014-5:2019-09 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
- DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
- DIN EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
- DIN EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
RU-GOST R, molecular weight polymer
- GOST R 57268.1-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General principles
- GOST R 57268.2-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. System calibration
- GOST R 57268.3-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperature method
- GOST R 57268.4-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
- GOST 33402-2015 Testing of chemicals of environmental hazard. Determination of the low molecular weight content of a polymer using gel permeation chromatography
- GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography
British Standards Institution (BSI), molecular weight polymer
- BS ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
- BS ISO 11344:2016 Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
- BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
- BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
- BS ISO 16014-4:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. High-temperature method
- BS ISO 16014-3:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Low-temperature method
- BS ISO 16014-1:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. General principles
- BS EN ISO 16014-5:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Light-scattering method
- BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Method using light-scattering detection
- BS ISO 16014-2:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Universal calibration method
- BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
- BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
农业农村部, molecular weight polymer
- NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)
- NY/T 1860.36-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 36: Determination of Low Molecular Weight Components of Polymers (Gel Permeation Chromatography)
国家市场监督管理总局、中国国家标准化管理委员会, molecular weight polymer
- GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
- GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
- GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
Japanese Industrial Standards Committee (JISC), molecular weight polymer
- JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
- JIS K 7252-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
- JIS K 7252-5:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
European Committee for Standardization (CEN), molecular weight polymer
- EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
- EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
- EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
- EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
TH-TISI, molecular weight polymer
- TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
- TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
- TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
- TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method
ES-UNE, molecular weight polymer
- UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
- UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
Danish Standards Foundation, molecular weight polymer
- DS/EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
- DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
Institute of Interconnecting and Packaging Electronic Circuits (IPC), molecular weight polymer
Lithuanian Standards Office , molecular weight polymer
- LST EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
AENOR, molecular weight polymer
- UNE-EN ISO 16014-5:2013 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
BE-NBN, molecular weight polymer