ZH
RU
ES

Test pin

Test pin, Total:500 items.

In the international standard classification, Test pin involves: Medical equipment, Road vehicle systems, Clothes, Products of the textile industry, Road vehicles in general, Sterilization and disinfection, Waxes, bituminous materials and other petroleum products, Protective equipment, Lubricants, industrial oils and related products, Non-destructive testing, Environmental testing, Aircraft and space vehicles in general, Furniture, Linear and angular measurements, Electrical and electronic testing, Mechanical structures for electronic equipment, Wood, sawlogs and sawn timber, Electromagnetic compatibility (EMC), Protection against fire, Electrical engineering in general, Lamps and related equipment, Footwear, Dentistry, Soil quality. Pedology, Aerospace electric equipment and systems, Civil engineering in general, Construction materials, Installations in buildings, Commercial vehicles, Tyres, Testing of metals, Cycles, Test conditions and procedures in general, Components for aerospace construction, Electromechanical components for electronic and telecommunications equipment, Packaging materials and accessories, Earth-moving machinery, Aerospace fluid systems and components, Electricity. Magnetism. Electrical and magnetic measurements, Semiconducting materials, Electrical accessories, Fasteners for aerospace construction, Adhesives, Earthworks. Excavations. Foundation construction. Underground works, Leather technology, Measurement of volume, mass, density, viscosity, Electronic components in general, Insulating materials, Ceramics, Aids for disabled or handicapped persons, Agricultural machines, implements and equipment, Conducting materials, Plastics, Semiconductor devices, Non-ferrous metals, Cellular materials.


German Institute for Standardization, Test pin

  • DIN 13097-5:2008 Hypodermic needles - Part 5: Sockets, hubs and connections - Requirements and testing
  • DIN 51579:2010-03 Testing of paraffin - Determination of needle penetration
  • DIN 53882:1990-09 Testing of textiles; determination of the sewing behaviour of knitted fabrics; needle cutting damage
  • DIN EN 17850:2022 Furniture - Star bases for seating - Requirements and test methods; German and English version prEN 17850:2022
  • DIN EN 17850:2022-07 Furniture - Star bases for seating - Requirements and test methods; German and English version prEN 17850:2022 / Note: Date of issue 2022-06-10
  • DIN 58916:2004-05 Hypodermic blood lancets - Point geometry, requirements and test methods
  • DIN 51580:2008 Testing of petroleum waxes - Determination of cone penetration
  • DIN 53882:1990 Testing of textiles; determination of the sewing behaviour of knitted fabrics; needle cutting damage
  • DIN 13097-4:2019-06 Hypodermic needles - Part 4: Point geometry, requirements and testing
  • DIN 19516:2004-05 WC seats - Requirements and test methods
  • DIN EN ISO 11608-2:2022-09 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022); German version EN ISO 11608-2:2022
  • DIN 53506:1990 Testing of rubber; determination of needle tear resistance
  • DIN EN 16989:2018-08 Railway applications - Fire protection on railway vehicles - Fire behaviour test for a complete seat; German version EN 16989:2018
  • DIN EN ISO 11608-1:2022-09 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022); German version EN ISO 11608-1:2022
  • DIN EN ISO 21649:2023-06 Needle-free injection systems for medical use - Requirements and test methods (ISO 21649:2023); German version EN ISO 21649:2023
  • DIN EN ISO 4210-9:2023-05 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods (ISO 4210-9:2023); German version EN ISO 4210-9:2023
  • DIN EN ISO 23910:2019 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2019)
  • DIN 53852:1991-09 Testing of textiles; determination of yarn length ratios in woven and knitted fabrics
  • DIN EN 60512-16-1:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008); German version EN 60512-16-1:2008 / Note: DIN IEC 60512-8 (1994-05) remains valid al...
  • DIN EN ISO 4210-9:2023 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods (ISO 4210-9:2023)
  • DIN EN 16653:2015 Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method; German version EN 16653:2015
  • DIN EN ISO 11608-4:2022-09 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022); German version EN ISO 11608-4:2022
  • DIN 54301:1977 Testing of textiles; determination of the needle tearing out resistance of nonwoven textiles
  • DIN EN ISO 9626:2016-12 Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016); German version EN ISO 9626:2016
  • DIN EN 1728:2012 Furniture - Seating - Test methods for the determination of strength and durability; German version EN 1728:2012
  • DIN EN 17191:2021-09 Children's Furniture - Seating for children - Safety requirements and test methods; German version EN 17191:2021
  • DIN EN 13759:2012-06 Furniture - Operating mechanisms for seating and sofa-beds - Test methods; German version EN 13759:2012
  • DIN EN 1728:2014-02 Furniture - Seating - Test methods for the determination of strength and durability; German version EN 1728:2012 + AC:2013

(U.S.) Ford Automotive Standards, Test pin

Indonesia Standards, Test pin

SE-SIS, Test pin

Business and Institutional Furniture Manufacturers Association （BIFMA), Test pin

GM Europe, Test pin

  • GME GMI L-10B-11-2008 Test for Firm Seating (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14339.)
  • GME GMI L-1J/K-8-2007 Seat Back Torque Test (Seat Bench) (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14601.)
  • GME L-1J03-3-1979 Seat Adjustment, Wear Test
  • GME GMI L-1J/K06-6-2007 Seat Back Trim, Wear Test (English/German; This standard may be applied only for current projects incl. Global Epsilon ε (37##). It is Superceded for all future projects and replaced by GMW14414.)

RU-GOST R, Test pin

YU-JUS, Test pin

British Standards Institution (BSI), Test pin

  • BS 5441:1988+A1:2019 Methods of test for knitted fabrics
  • BS EN ISO 11608-2:2022 Needle-based injection systems for medical use. Requirements and test methods. Double-ended pen needles - Part 2: Needles
  • BS EN 60068-2-67:1996+A1:2019 Environmental testing - Tests. Test Cy. Damp heat, steady state, accelerated test primarily intended for components
  • DD ENV 14443-2004 Domestic furniture--Seating--Test methods for the determination of durability of upholstery
  • 22/30449500 DC BS EN 17850. Furniture. Star bases for seating. Requirements and test methods
  • BS EN 60838-1:2017+A2:2021 Miscellaneous lampholders - General requirements and tests
  • BS EN 60838-1:2017+A11:2021 Miscellaneous lampholders - General requirements and tests
  • BS EN ISO 11608-1:2022 Needle-based injection systems for medical use. Requirements and test methods - Needle-based injection systems
  • PD IEC/TR 62878-2-2:2015 Device embedded substrate. Guidelines. Electrical testing
  • BS EN ISO 4210-9:2023 Tracked Changes. Cycles. Safety requirements for bicycles. Saddles and seat-post test methods
  • BS EN 2591-6415:2002 Elements of electrical and optical connection. Test methods - Optical elements. Test probe damage
  • 20/30381877 DC BS EN ISO 11608-2. Needle-based injection systems for medical use. Requirements and test methods - Part 2. Double-ended needles
  • PD IEC/TS 62878-2-4:2015 Device embedded substrate. Guidelines. Test element groups (TEG)
  • BS EN 60695-11-5:2017 Tracked Changes. Fire hazard testing. Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance
  • 16/30332255 DC BS EN ISO 20874. Footwear. Test methods for outsoles. Needle tear strength
  • BS EN 61340-4-7:2017 Electrostatics. Standard test methods for specific applications. Ionization
  • PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
  • BS PD ISO/TS 16840-12:2015 Wheelchair seating. Apparatus and method for cushion envelopment testing
  • BS EN 2591-415:2001 Elements of electrical and optical connection - Test methods - Test probe damage (female contacts)
  • 21/30393409 DC BS EN ISO 4210-9. Cycles. Safety requirements for bicycles. Part 9. Saddles and seat-post test methods
  • BS EN ISO 11608-4:2022 Tracked Changes. Needle-based injection systems for medical use. Requirements and test methods. Needle-based injection systems containing electronics
  • BS EN ISO 9902-5:2001+A2:2014 Textile machinery. Noise test code - Weaving and knitting preparatory machinery
  • BS EN ISO 21649:2023 Tracked Changes. Needle-free injection systems for medical use. Requirements and test methods
  • 22/30441993 DC BS EN ISO 21649. Needle-free injection systems for medical use. Requirements and test methods
  • BS EN 1728:2012 Furniture. Seating. Test methods for the determination of strength and durability

AT-ON, Test pin

  • ONORM E 1380-1971 Testing Devices, Standard Test Pin D
  • ONORM C 9214-1984 Bitumen and hard coal tar pitch; testing; determination of needle penetration
  • ONORM M 1348-1995 Control of measuring and test equipment - Testing instruction for electrical linear measuring probes
  • ONORM S 4117-1984 Stiched tape slings; requirements, testing, marking of conformity
  • ONORM C 9215-1985 Bitumen and hard coal tar pitch; testing; calculation of penetration Index
  • OENORM EN 17191-2021 Children's Furniture - Seating for children - Safety requirements and test methods

Society of Automotive Engineers (SAE), Test pin

Korean Agency for Technology and Standards (KATS), Test pin

  • KS R 1153-2012 Seat and seat anchorages test method
  • KS B 0535-2005 Method for measurement ox performancecharacteristics of ultrasonic probes
  • KS K 0503-1995 Testing method for pilling in knitted fabrics:ICI box method
  • KS K 0811-2017 Test method for determination of the cover factor of knitted fabric
  • KS M ISO 20876:2012 Footwear-Test methods for insoles-Resistance to stitch tear
  • KS M ISO 20876:2020 Footwear — Test methods for insoles — Resistance to stitch tear
  • KS R 1082-2013 TEST CODE OF PADDING MATERIAL FOR AUTOMOBILE SEATS
  • KS R 1082-2003(2008) TEST CODE OF PADDING MATERIAL FOR AUTOMOBILE SEATS
  • KS K 0811-1995 Testing method for determination of the cover factor of knitted fabric
  • KS M ISO 20874:2020 Footwear — Test methods for outsoles — Needle tear strength
  • KS L 5108-2007(2012) Testing method for setting time of hydraulic cement by vicat needle
  • KS K 0811-2022 Test method for determination of the cover factor of knitted fabric
  • KS L 5108-1984 Testing method for setting time of hydraulic cement by vicat needle
  • KS R 1080-2013 TEST CODE OF SEATING COMFORT FOR AUTOMOBILE SEATS
  • KS R 1161-2002(2007) Seat belt anchorages strength test method
  • KS C IEC 60695-11-5:2019 Fire hazard testing — Part 11-5: Test flames — Needle-flame test method — Apparatus, confirmatory test arrangement and guidance
  • KS K 0557-2015 Test method for bagging of woven and knitted fabrics
  • KS R ISO 4210-9:2017 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods
  • KS D 0260-1999 TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
  • KS K 0812-2001 TESTING METHOD FOR SHRINGKAGE IN LAUNDERING AND DIMENSIONAL RESTORABILITY OF KNIT FABRE(WASH WHEEL METHOD)
  • KS K 0812-1982 TESTING METHOD FOR SHRINGKAGE IN LAUNDERING AND DIMENSIONAL RESTORABILITY OF KNIT FABRE(WASH WHEEL METHOD)
  • KS M ISO 22653:2019 Footwear — Test methods for lining and insocks — Static friction
  • KS L 1619-2013(2018) Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
  • KS C 0256-2002(2022) Testing method of resistivity for silicon crystals and silicon wafers with four - point probe
  • KS M ISO 9950-2003(2018)
  • KS L 5103-2021 Test method for setting time of hydraulic cement by Gilmour needles
  • KS L 5103-1996(2016) Testing method for setting time of hydraulic cement by Gilmour needles
  • KS P ISO 7864:2019 Sterile hypodermic needles for single use — Requirements and test methods
  • KS D 0260-1989(1994) TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
  • KS M ISO 22649-2004(2019) Footwear — Test methods for insoles and insocks — Water absorption and desorption

VE-FONDONORMA, Test pin

National Metrological Verification Regulations of the People's Republic of China, Test pin

  • JJG 508-2004 Resistivity Measuring Instruments with Four - Probe Array Method
  • JJG 508-1987 Verification Regulation of Resistivity Measuring Instruments with Four-Prope Array Method
  • JJG 839-1993 Verification Regulation of Noise Figure Meter
  • JJG 237-1995 Verification Regulation of Time Interval Measuring Instrument with Needle Indication

IN-BIS, Test pin

Professional Standard - Machinery, Test pin

American Society for Testing and Materials (ASTM), Test pin

  • ASTM D3882-08(2020) Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
  • ASTM D217-97 Standard Test Methods for Cone Penetration of Lubricating Grease
  • ASTM D1321-02a Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D1321-02 Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D1321-04 Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D5334-00(2004) Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
  • ASTM D5334-22 Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
  • ASTM D5334-22a Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
  • ASTM D5334-22ae1 Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
  • ASTM G99-03 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
  • ASTM D4724-99 Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
  • ASTM D4724-99(2005) Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
  • ASTM D937-07 Standard Test Method for Cone Penetration of Petrolatum
  • ASTM E2574/E2574M-11 Standard Test Method for Fire Testing of School Bus Seat Assemblies
  • ASTM E2574/E2574M-12 Standard Test Method for Fire Testing of School Bus Seat Assemblies
  • ASTM E2574/E2574M-12a Standard Test Method for Fire Testing of School Bus Seat Assemblies
  • ASTM F851-87(2000) Standard Test Method for Self-Rising Seat Mechanisms
  • ASTM F851-87(1996) Standard Test Method for Self-Rising Seat Mechanisms
  • ASTM F851-87(2020) Standard Test Method for Self-Rising Seat Mechanisms
  • ASTM F3300-18 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
  • ASTM D6230-98 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
  • ASTM D6230-13 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
  • ASTM G99-04a Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
  • ASTM G99-04 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
  • ASTM G99-05 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
  • ASTM G171-03(2009)e1 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
  • ASTM D4562-90(1995)e1 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
  • ASTM G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
  • ASTM D4562-01(2019) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
  • ASTM D5478-98 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM D5478-98(2003) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM C1785-16a Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM D5478-09 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM D3787-01 Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
  • ASTM D3787-89 Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
  • ASTM F397-93(1999) Standard Test Method for Resistivity of Silicon Bars Using a Two-Point Probe
  • ASTM D5478-13(2022) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • ASTM D8007-15 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics

CZ-CSN, Test pin

Military Standards (MIL-STD), Test pin

Standard Association of Australia （SAA）, Test pin

PT-IPQ, Test pin

  • NP 2337-1988 Methods of testing doors Test for deformation of the leaf in its plane
  • NP 2335-1988 Methods of testing doors Hard body impact test on door leaves
  • NP ENV 1170-8-2000 Test method for glass-fibre reinforced cement Part 8:Cyclic weathering type test

RO-ASRO, Test pin

PL-PKN, Test pin

  • PN Z54058-1990 Medical instruments Needle holders Re?uirements and tests
  • PN E04614-04-1986 Fire hazard testing Part 2: Test methods Needle-flame test
  • PN S80052-1988 Anchorages for seat belts Requirements and tests
  • PN P04992-1989 Methods of chemical tests Knitted medical articles Determination of ammonia and ammonium salts
  • PN P04991-1989 Methods of chemical tests Knitted medical articles Determination of heavy metals jons
  • PN E85201-23-1985 Electric light sources Gauges for caps Gauges for testing the insertion of B15d and B22d caps in the holder
  • PN-EN 60838-1-2017-07/A2-2021-08 E Miscellaneous lampholders - Part 1: General requirements and tests
  • PN-EN 60838-1-2017-07/A11-2021-10 E Miscellaneous lampholders - Part 1: General requirements and tests
  • PN P04990-1989 Methods of chemical tests Knitted medical articles Determination of ultraviolet radiation absorbance
  • PN D95017-1992 Wood. Large sized wood, conifeur. General requirements and methodes of test
  • PN E85201-20-1985 Gauges for testing the retention of BA9, BA 15 and BAY15 caps in the holder

未注明发布机构, Test pin

  • JIS T 3226-2:2023 Needle-based injection systems for medical use -- Part 2: Needles -- Requirements and test methods
  • JIS T 3226-1:2023 Needle-based injection systems for medical use -- Part 1: Needle-based injection systems -- Requirements and test methods
  • AS/NZS 60695.11.5:2005
  • BS EN 1728:2012(2013) Furniture — Seating — Test methods for the determination of strength and durability

CENELEC - European Committee for Electrotechnical Standardization, Test pin

  • EN 60695-2-2:1994 Fire Hazard Testing Part 2: Test Methods Section 2 - Needle-Flame Test

Danish Standards Foundation, Test pin

  • DS/EN ISO 11608-2:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles
  • DS 2366:1993 Measuring equipment. Cylindrical measuring pins. Requirements, testing, marking
  • DS/EN ISO 11608-1:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems
  • DS/EN 60695-11-5:2005 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
  • DS/EN 60512-20-1:2010 Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame
  • DS/EN 60838-1/A1:2008 Miscellaneous lampholders - Part 1: General requirements and tests
  • DS/EN 60838-1:2005 Miscellaneous lampholders - Part 1: General requirements and tests
  • DS/EN 60838-1/A2:2011 Miscellaneous lampholders - Part 1: General requirements and tests
  • DS/EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
  • DS/EN 15694:2009 Agricultural and forestry tractors - Passenger seat - Requirements and test procedures
  • DS/EN 1728:2012 Furniture - Seating - Test methods for the determination of strength and durability
  • DS/EN 1728/AC:2013 Furniture - Seating - Test methods for the determination of strength and durability

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test pin

  • GB/T 15394-1994 General specification for probe tester
  • GB/T 22638.2-2008 Test methods for aluminium and aluminium alloy foils.Part 2:Determination of porosity
  • GB/T 17928-2023 Determination of pinhole tear strength for physical and mechanical tests of leather
  • GB/T 18029-2000 Wheelchairs-Resistance to ignition of upholstered parts-Requirements and test methods

BR-ABNT, Test pin

GM Daewoo, Test pin

International Electrotechnical Commission (IEC), Test pin

KR-KS, Test pin

  • KS M ISO 20876-2020 Footwear — Test methods for insoles — Resistance to stitch tear
  • KS M ISO 20874-2020 Footwear — Test methods for outsoles — Needle tear strength
  • KS C IEC 60695-11-5-2019 Fire hazard testing — Part 11-5: Test flames — Needle-flame test method — Apparatus, confirmatory test arrangement and guidance
  • KS R ISO 4210-9-2017 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods
  • KS M ISO 22653-2019 Footwear — Test methods for lining and insocks — Static friction
  • KS P ISO 7864-2019 Sterile hypodermic needles for single use — Requirements and test methods

Association Francaise de Normalisation, Test pin

  • NF EN ISO 11608-1:2022 Systèmes d'injection à aiguille pour usage médical - Exigences et méthodes d'essai - Partie 1 : systèmes d'injection à aiguille
  • XP P94-123:1999 Sols : reconnaissance et essais - Diagraphie dans les sondages - Méthode de la sonde à neutrons
  • NF G37-108*NF EN 16653:2015 Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method
  • NF D61-071:1992 Contract furniture - Seats - Mechanical tests and specifications
  • NF EN ISO 21649:2023 Systèmes d'injection sans aiguille pour usage médical - Exigences et méthodes d'essai
  • NF EN ISO 4210-9:2016 Cycles - Exigences de sécurité des bicyclettes - Partie 9 : méthodes d'essai de la selle et du poste d'assise
  • NF C20-924-11-5*NF EN 60695-11-5:2017 Fire hazard testing - Part 11-5 : test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
  • NF EN ISO 11608-2:2022 Systèmes d'injection à aiguille pour usage médical - Exigences et méthodes d'essai - Partie 2 : aiguilles à deux extrémités pour stylos-injecteurs
  • NF EN 60068-2-31:2008 Essais d'environnement - Partie 2-31 : essais - Essai Ec : choc lié à des manutentions brutales, essai destiné en premier lieu aux matériels
  • NF R30-101-9*NF EN ISO 4210-9:2016 Cycles - Safety requirements for bicycles - Part 9 : saddles and seat-post test methods
  • NF G07-101:1971 Textiles. Testing of knitted fabrics. Method of measurement of length of yarn consumed of regularity of yarn consumption in knitted goods.
  • NF EN IEC 60068-2-21:2021 Essais d'environnement - Partie 2-21 : essais - Essai U : robustesse des sorties et des dispositifs de montage incorporés
  • NF EN 60695-11-5:2017 Essais relatifs aux risques du feu - Partie 11-5 : flammes d'essai - Méthode d'essai au brûleur-aiguille - Appareillage, dispositif d'essai de vérification et lignes directrices
  • NF G07-140:1979 Textiles. Tests on knitwear. Determination of the ultimate tensile strength.
  • NF C61-530-1/A2:2011 Miscellaneous lampholders - Part 1 : general requirements and tests.
  • NF C61-530-1/A1*NF EN 60838-1/A1:2017 Miscellaneous lampholders - Part 1 : general requirements and tests
  • NF C61-530-1*NF EN 60838-1:2017 Miscellaneous lampholders - Partie 1 : general requirements and tests
  • NF C61-530-1/A2*NF EN 60838-1/A2:2021 Miscellaneous lampholders - Part 1 : general requirements and tests
  • NF C61-530-1/A11*NF EN 60838-1/A11:2021 Miscellaneous lampholders - Part 1 : general requirements and tests
  • NF EN 60838-1/A1:2017 Douilles diverses pour lampes - Partie 1 : exigences générales et essais
  • NF EN 60838-1/A2:2021 Douilles diverses pour lampes - Partie 1 : exigences générales et essais
  • NF EN 60838-1/A11:2021 Douilles diverses pour lampes - Partie 1 : exigences générales et essais
  • NF EN 60838-1:2017 Douilles diverses pour lampes - Partie 1 : exigences générales et essais
  • NF EN ISO 11608-4:2022 Systèmes d'injection à aiguille pour usage médical - Exigences et méthodes d'essai - Partie 4 : systèmes d'injection à aiguille contenant de l'électronique
  • NF EN 60512-20-1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 20-1 : essais relatifs aux risques du feu - Essai 20a : inflammabilité, brûleur-aiguille
  • NF EN 60512-16-1:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-1 : essais mécaniques des contacts et des sorties - Essai 16a : endommagement par sonde d'essai
  • NF U02-045*NF EN 15694+A1:2016 Agricultural and forestry tractors - Passenger seat - Requirements and test procedures
  • NF U02-045/IN1*NF EN 15694/IN1:2016 Agricultural and forestry tractors - Passenger seat - Requirements and test procedures
  • NF EN 13759:2012 Meubles - Mécanismes de manoeuvre des sièges et des canapés - Méthodes d'essai
  • NF G07-109:1980 Tests for fabrics. Method for determination of the drape of a woven or knitted fabric.
  • NF EN ISO 9626:2016 Tubes d'aiguilles en acier inoxydable pour la fabrication de matériel médical - Exigences et méthodes d'essai
  • NF D61-001*NF EN 1728:2012 Furniture - Seating - Test methods for the determination of strength and durability
  • NF D61-191*NF EN 17191:2021 Children's Furniture - Seating for children - Safety requirements and test methods
  • NF EN 1728:2012 Ameublement - Sièges - Méthodes d'essais pour la détermination de la résistance et la durabilité

ES-UNE, Test pin

  • UNE-EN ISO 11608-2:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
  • UNE-EN ISO 11608-1:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
  • UNE-EN 60068-2-67:1996/A1:2019 Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components (Endorsed by Asociación Española de Normalización in October of 2019.)
  • UNE-EN ISO 4210-9:2023 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods (ISO 4210-9:2023) (Endorsed by Asociación Española de Normalización in March of 2023.)
  • UNE-EN 60512-20-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame (Endorsed by AENOR in October of 2010.)
  • UNE-EN 60838-1:2017/A2:2021 Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in May of 2021.)
  • UNE-EN 60838-1:2017/A1:2017 Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in September of 2017.)
  • UNE-EN 60838-1:2017/A11:2021 Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in July of 2021.)
  • UNE-EN 60838-1:2017 Miscellaneous lampholders - Part 1: General requirements and tests (Endorsed by Asociación Española de Normalización in June of 2017.)
  • UNE-EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (Endorsed by AENOR in November of 2008.)
  • UNE-EN ISO 21649:2023 Needle-free injection systems for medical use - Requirements and test methods (ISO 21649:2023)
  • UNE-EN IEC 62947:2023 Electrically operated spray seats for household and similar use - Methods for measuring the performance - General test methods of spray seats
  • UNE-EN ISO 11608-4:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
  • UNE-EN 17191:2022 Children’s Furniture - Seating for children - Safety requirements and test methods

Professional Standard - Aviation, Test pin

  • HB 5886-1985 Aircraft cockpit white light lighting inspection test
  • HB 5521-1980 Aircraft cockpit red lighting inspection test method (Trial)

UY-UNIT, Test pin

Japanese Industrial Standards Committee (JISC), Test pin

  • JIS L 1076:2006 Testing methods for pilling of woven fabrics and knitted fabrics
  • JIS L 1076:2012 Testing methods for pilling of woven fabrics and knitted fabrics
  • JIS L 1076:1992 Testing methods for pilling of woven fabrics and knitted fabrics
  • JIS B 7440:1987 Test code for accuracy of coordinate measuring machines
  • JIS L 1060:2006 Testing methods for pleating of woven and knitted fabrics
  • JIS L 1060:2012 Testing methods for pleating of woven and knitted fabrics
  • JIS L 1060:1987 Testing methods for pleating of woven and knitted fabrics
  • JIS L 1061:1987 Testing methods for bagging of woven and knitted fabrics
  • JIS L 1094:2014 Testing methods for electrostatic propensity of woven and knitted fabrics
  • JIS L 1094:1997 Testing methods for electrostatic propensity of woven and knitted fabrics
  • JIS L 1057:1992 Testing methods for shrinkage percentage by ironing of woven and knitted fabrics
  • JIS L 1057:2006 Testing methods for dimensional change by ironing of woven and knitted fabrics
  • JIS L 1075:2007 Testing methods for pile retention of woven and knitted fabrics
  • JIS L 1057:2012 Testing methods for dimensional change by ironing of woven and knitted fabrics
  • JIS L 1075:2013 Testing methods for pile retention of woven and knitted fabrics
  • JIS L 1063:1985 Testing methods for migration of dyestuffs and finishing agents on woven fabrics and knitted fabrics
  • JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array
  • JIS L 1901:1988 Testing methods for frosting due to yarn reversing of woven and knitted fabrics
  • JIS T 3226-2:2011 Pen-injectors for medical use -- Part 2: Needles -- Requirements and test methods

ECIA - Electronic Components Industry Association, Test pin

  • RS-364-25A-1983 TP-25A Probe Damage Test Procedure for Electrical Connectors
  • IS-701-1996 Production Ball Grid Array (BGA) Socket Test Specification
  • 364-91-1996 TP-91 Dust Test for Electrical Connectors and Sockets
  • EIA-364-116-2015 TP-116 Pin Contact Stability Test Procedure for Electrical Connectors
  • EIA-364-30A-2002 TP-30A Capacitance Test Procedure for Electrical Connectors and Sockets
  • EIA-364-28D-1999 TP-28D Vibration Test Procedure for Electrical Connectors and Sockets
  • EIA-364-28F-2011 (R2017) TP-28F Vibration Test Procedure for Electrical Connectors and Sockets
  • 364-28C-1997 TP-28C Vibration Test Procedure for Electrical Connectors and Sockets
  • EIA-364-28F-2011 TP-28F Vibration Test Procedure for Electrical Connectors and Sockets
  • EIA-364-11C-2014 TP-11C Resistance to Solvents Test Procedure for Electrical Connectors and Sockets
  • 364-11A-1999 TP-11A Resistance to Solvents Test Procedure for Electrical Connectors and Sockets
  • EIA/ECA-364-91B-2016 TP-91B Dust Test Procedure for Electrical Connectors and Sockets
  • EIA-364-59A-2006 TP-59A Low Temperature Test Procedure for Electrical Connectors and Sockets
  • EIA/ECA-364-28E-2006 TP-28E Vibration Test Procedure for Electrical Connectors and Sockets
  • EIA-364-53B-2000 TP-53B Nitric Acid Vapor Test@ Gold Finish Test Procedure for Electrical Connectors and Sockets
  • 364-53A-1997 TP-53A Nitric Acid Vapor Test@ Gold Finish Test Procedure for Electrical Connectors and Sockets
  • EIA/ECA-364-53B-2000 TP-53B Nitric Acid Vapor Test@ Gold Finish Test Procedure for Electrical Connectors and Sockets
  • 364-C-1994 Electrical Connector/Socket Test Procedures Including Environmental Classifications
  • EIA-364-E-2008 ELECTRICAL CONNECTOR/SOCKET TEST PROCEDURES INCLUDING ENVIRONMENTAL CLASSIFICATIONS
  • EIA-364-F-2014 Electrical Connector/Socket Test Procedures Including Environmental Classifications
  • EIA-364-31F-2019 TP-31F Humidity Test Procedure for Electrical Connectors and Sockets
  • EIA-364-26B-1999 TP-26B Salt Spray Test Procedure for Electrical Connectors@ Contacts and Sockets
  • EIA-364-31D-2014 TP-31D Humidity Test Procedure for Electrical Connectors and Sockets
  • EIA-364-31C-2008 TP-31C HUMIDITY TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS (***BEST AVAILABLE COPY***)
  • EIA-364-31E-2017 TP-31E Humidity Test Procedure for Electrical Connectors and Sockets
  • EIA-364-31B-2000 TP-31B Humidity Test Procedure for Electrical Connectors and Sockets
  • EIA/ECA-364-26B-1999 TP-26B Salt Spray Test Procedure for Electrical Connectors@ Contacts and Sockets

The American Road & Transportation Builders Association, Test pin

  • AASHTO T 49-2014 Standard Method of Test for Penetration of Bituminous Materials
  • AASHTO T 49-2015 Standard Method of Test for Penetration of Bituminous Materials
  • AASHTO T 131-2010 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • AASHTO T 131-2015 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • AASHTO T 131-2008 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • AASHTO T 154-2010 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles
  • AASHTO T 154-2015 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles

AASHTO - American Association of State Highway and Transportation Officials, Test pin

  • T 49-2014 Standard Method of Test for Penetration of Bituminous Materials
  • T 49-2007 Standard Method of Test for Penetration of Bituminous Materials
  • T 49-2015 Standard Method of Test for Penetration of Bituminous Materials
  • T49-1993 Standard Method of Test for Penetration of Bituminous Materials
  • T 131-2008 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • T 131-2015 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • T 131-2009 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • T 131-2006 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • T 131-2010 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
  • T 154-2006 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles
  • T 154-2015 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles
  • T 154-2009 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles
  • T 154-2018 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles
  • T 154-2011 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles
  • T 154-2010 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles

American National Standards Institute （ANSI), Test pin

  • ANSI C12.8-1981 Watthour Meters, Test Blocks and Cabinets for Installation of Self-Contained “A” Base
  • ANSI/ASTM E2574a:2012 Test Method for Fire Testing of School Bus Seat Assemblies
  • ANSI/EIA 364-56E:2011 Resistance to soldering heat test procedure for electrical connectors and sockets
  • ECA EIA-364-G-2021 Electrical Connector/Socket Test Procedures Including Environmental Classifications

Lithuanian Standards Office , Test pin

  • LST EN ISO 11608-2:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012)
  • LST EN ISO 21649:2010 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
  • LST EN 60838-1/A11-2021 Miscellaneous lampholders - Part 1: General requirements and tests
  • LST EN ISO 11608-1:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2012)
  • LST EN ISO 23910:2008 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2007)
  • LST EN 15694-2009 Agricultural and forestry tractors - Passenger seat - Requirements and test procedures
  • LST EN 60695-11-5-2005 Fire hazard testing. Part 11-5: Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-5:2004)
  • LST EN 60512-20-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame (IEC 60512-20-1:2010)
  • LST EN 1728-2012 Furniture - Seating - Test methods for the determination of strength and durability
  • LST EN 17191-2021 Children's Furniture - Seating for children - Safety requirements and test methods

AENOR, Test pin

  • UNE-EN ISO 11608-2:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012)
  • UNE-EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
  • UNE-EN ISO 21649:2010 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
  • UNE-EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
  • UNE-EN ISO 23910:2008 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2007)
  • UNE-EN ISO 4210-9:2015 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods (ISO 4210-9:2014)
  • UNE-EN 1728:2013 Furniture - Seating - Test methods for the determination of strength and durability

National Electrical Manufacturers Association（NEMA), Test pin

  • NEMA C12.8-1981 Test Blocks and Cabinets for Installation of Self-Contained “A” Base Watthour Meters

未注明发布机构, Test pin

  • JIS T 3226-2:2023 Needle-based injection systems for medical use -- Part 2: Needles -- Requirements and test methods
  • JIS T 3226-1:2023 Needle-based injection systems for medical use -- Part 1: Needle-based injection systems -- Requirements and test methods
  • AS/NZS 60695.11.5:2005
  • BS EN 1728:2012(2013) Furniture — Seating — Test methods for the determination of strength and durability

JSAE - Society of Automotive Engineers of Japan@ Inc., Test pin

Professional Standard - Non-ferrous Metal, Test pin

  • YS/T 602-2007 Test method for resistivity of zone-refined germanium ingot using a two-point probe
  • YS/T 602-2017 Two-probe method for measuring resistivity of zone-melted germanium ingots
  • YS/T 455.2-2003 Test method for aluminium foil Part 2:Test method for porosity

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test pin

  • GB/T 22638.2-2016 Test methods for aluminium and aluminium alloy foils—Part 2: Determination of pinhole

Professional Standard - Textile, Test pin

  • FZ/T 20011-1995 Test method for measuring skew angle of wool knitted garments

JO-JSMO, Test pin

  • JS 2306-9-2021 Cycles - Safety requirements for bicycle Part 9: Saddles and seat-post test methods

Group Standards of the People's Republic of China, Test pin

  • T/ZGIA 001-2019 Graphene test method for the determination of powder conductivity four-probe method
  • T/BEA 43002-2023 Calibration Specification for Single Langmuir Probe Plasma Instrument
  • T/CASAS 019-2021 Test method for resistivity of micro and nano metal sintered compact: four probe method
  • T/GDAQI 93-2022 Performance requirements and test method for neck strength and rigidity of dental burs

SAE - SAE International, Test pin

  • SAE AS31971-1997 GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST
  • SAE AS31971A-2007 GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST
  • SAE USCAR15-2006 Specification For Testing Automotive Light Bulb Sockets (Revision 2)
  • SAE J2826-2016 Snowmobile Probe Test for Contact with Power Driven Parts
  • SAE J138-2019 Performance Requirements for Motor Vehicle Headlamps
  • SAE J1454-1986 Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
  • SAE J2319-2019 Low-Speed Impact Bumper System Test Procedure for Passenger Vehicles
  • SAE J815-2001 Load Deflection Testing of Urethane Foams for Automotive Seating
  • SAE J815-1962 Load Deflection Testing of Urethane Foams for Automotive Seating
  • SAE J815-2012 Load Deflection Testing of Urethane Foams for Automotive Seating
  • SAE USCAR15-2004 Specification for Testing Automotive Miniature Bulb Socket/Circuit Plate Assemblies

ES-AENOR, Test pin

Electronic Components, Assemblies and Materials Association, Test pin

European Committee for Electrotechnical Standardization（CENELEC）, Test pin

  • EN 60512-20-1:2010 Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame
  • EN IEC 62947:2022 Electrically operated spray seats for household and similar use - Methods for measuring the performance - General test methods of spray seats

Professional Standard - Electron, Test pin

  • SJ/T 10314-1992 Generic specification of resistivity measuring instrument with four-point probe
  • SJ/T 31122-1994 Requirements of readiness and methods of inspection and assessment for four-point probes
  • SJ/T 10481-1994 Test method for resistivity of silicon epitaxial layers by area contacts three-probe techniques
  • SJ/T 31123-1994 Requirements of readiness and methods of inspection and assessment for automatic multi-point test probes

Defense Logistics Agency, Test pin

Electronic Components, Assemblies and Materials Association, Test pin

European Committee for Standardization (CEN), Test pin

  • FprEN ISO 11608-2:2021 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO/FDIS 11608-2:2021)
  • FprEN ISO 11608-1:2021 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO/FDIS 11608-1:2021)
  • EN 1728:2012 Furniture - Seating - Test methods for the determination of strength and durability
  • EN 17191:2021 Children's Furniture - Seating for children - Safety requirements and test methods

GOSTR, Test pin

海关总署, Test pin

  • SN/T 5315-2021 Photocatalytic self-cleaning ceramic performance testing method Fluorescent probe method

GM Global, Test pin

  • GMW 14862-2013 Under Seat Storage Box Strength and Durability Test Issue 2; English

API - American Petroleum Institute, Test pin

CH-SNV, Test pin

  • SN EN 17191-2021 Children's Furniture - Seating for children - Safety requirements and test methods

IT-UNI, Test pin

  • UNI EN 17191-2021 Children's Furniture - Seating for children - Safety requirements and test methods

Professional Standard - Light Industry, Test pin

  • QB/T 5868-2023 Children's chairs—Test methods for the determination of stability, strength and durability

Military Standard of the People's Republic of China-General Armament Department, Test pin

  • GJB 455-1988 Basic technical requirements and test methods for aircraft cockpit lighting

International Organization for Standardization (ISO), Test pin

  • ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

  standard test pin, test needle, Test pin, Power 2-pin header, Seat method, Luer hub, Test socket, Seat Adjustment, Seat Adjustment, Luer hub, stitch test, test pin needle, How to remove the needle seat, Seat processing, Seat x, Seat back plug, Needle seat, Seat inspection, The purpose of the needle seat, Seat pressure.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved