ZH
RU
ES

Seat pressure

Seat pressure, Total:143 items.

In the international standard classification, Seat pressure involves: Valves, Ground service and maintenance equipment, Chipless working equipment, Fluid storage devices, Pipeline components and pipelines, Aids for disabled or handicapped persons, Equipment for the rubber and plastics industries, Bearings, Iron and steel products, Plastics, On-board equipment and instruments, External water conveyance systems, External sewage systems, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE, Aerospace electric equipment and systems, Internal combustion engines, Materials for aerospace construction, Fluid power systems, Electrical accessories, Insulation, Internal combustion engines for road vehicles.

IN-BIS, Seat pressure

• IS 10650-1983

Group Standards of the People's Republic of China, Seat pressure

• T/CASME 472-2023 Self operated single seat pressure regulating valve

SE-SIS, Seat pressure

• SIS SMS 1646-1955
• SIS SMS 1644-1955
• SIS SMS 1647-1955
• SIS SMS 1645-1955
• SIS SMS 1286-1968 Fittings for piping. Sluice valves. Body seat rings. Nominal pressure 10 kgf/cm* above atmospheric
• SIS SMS 1165-1969 Fire fighting equipment. Inclined seat valves 63 with oupling part 63 for pressure hose
• SIS SMS-1026-1937
• SIS SS-ISO 9133:1989 Passengercars — Engine cooling systems — Threaded pressure caps and their seats on filler necks

Defense Logistics Agency, Seat pressure

• DLA QPL-25867-13 NOTICE 1-2008 Gage, Pressure, Dial Indicating, Pneumatic
• DLA A-A-59618 VALID NOTICE 1-2007 CLEANER, PRESSURE, HOT-WATER, SKID-MOUNTED
• DLA MIL-DTL-21617/18 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 026A)
• DLA MIL-DTL-21617/21 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 032A)
• DLA MIL-DTL-21617/24 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 040A)
• DLA MIL-DTL-21617/12 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized Type (Style 017A)
• DLA MIL-DTL-21617/15 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts, Pressurized (Style 023A)
• DLA MIL-DTL-21617/3 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS, PRESSURIZED (STYLE 004A)
• DLA MIL-DTL-21617/6 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS, PRESSURIZED (STYLE 008A)
• DLA MIL-DTL-21617/9 VALID NOTICE 1-2008 CONNECTOR, MALE RECEPTACLE ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, PIN CONTACTS, PRESSURIZED (STYLE 013A)
• DLA MIL-DTL-83723/74 F-2009 CONNECTORS, ELECTRIC, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, CRIMP PIN CONTACT), (SERIES III, CLASSES A, G, M, R, T, W AND Z)
• DLA MIL-C-83723/18 B-1976 CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (CABLE CONNECTING, THREADED COUPLING, CRIMP PIN CONTACTS), (SERIES II, CLASSES A, G, AND R)
• DLA MIL-DTL-83723/72 E-2009 CONNECTOR, ELECTRIC, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, BAYONET COUPLING, CRIMP PIN CONTACT) (SERIES III, CLASSES A, G, M, R, T, W AND Z)
• DLA MIL-DTL-83723/83 E-2009 CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, THREADED COUPLING, CRIMP PIN CONTACT), (SERIES III, CLASSES A, G, K, M, N, R, S, T, W AND Z)
• DLA MIL-DTL-83723/85 G-2009 CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, THREADED COUPLING, CRIMP PIN CONTACT), (SERIES III, CLASSES A, G, K, M, N, R, S, T, W AND Z)

German Institute for Standardization, Seat pressure

• DIN ISO 11:1997 Aircraft - Ground pressure testing connections for pressure cabins (ISO 11:1987)
• DIN 5319:1978 Industrial sewing machines; presser bar with prismatical support, fitting dimensions
• DIN 14368:1985 Branchpipe-holder for nominal pressure 16
• DIN 14368:2015 Branchpipe-holder for nominal pressure 16
• DIN 49670:1986-10 Gauges for lampholders with protective collar for fluorescent lamps
• DIN 86061:2013-01 Connecting sockets with pipe flange, for steel tubes, nominal pressure 10
• DIN EN 14830:2007 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance; English version of DIN EN 14830:2007-01
• DIN 55184:1985 Machine tools; open front mechanical power presses; installation zone for tools; constructional sizes, bedplates, bedplate rings, bed plugs
• PAS 1010 T.3-2009 Guideline for the order and manufacture of pressure equipment in accordance with the EC Pressure Equipment Directive 97/23/EC — Part 3: Industrial piping
• PAS 1023 T.3-2008 Guideline for the implementation of the industrial safety order work equipment — Part 3: Pressure vessels
• DIN 48004:1969-09 Insulators for overhead power lines; pin type insulators St, rated voltages 10 to 30 kV
• DIN 86064:2013-01 Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
• DIN 49328:1985-04 D-type fuse-bases for front connection, for push-in gauge rings, D III 63 A 750 V / Note: To be replaced by DIN VDE 0635 (2022-05), DIN VDE 0635/A1 (2005-09).

Professional Standard - Machinery, Seat pressure

• JB/T 6962.1-1993 Forging die for mechanical press machines Die holders
• JB/T 5110.6-1992 Screw press die Technical conditions for die base
• JB/T 5110.4-1992 Screw press die Die base used for round die blocks
• JB/T 5110.5-1992 Screw press die Die base used for rectangular die blocks
• JB/T 6059.6-2015 Mechanical press forging dies.Components.Part 6: Die holders
• JB/T 5110.3-2015 Screw press forging dies.Components.Part 3: Die holders

未注明发布机构, Seat pressure

• BS 2G 201:1996(1999) Specification for Counter and pointer pressure altimeters
• BS G 226:1979(2000) Specification for Counter and pointer, servo type, pressure altimeter systems
• BS 546:1950 Supplement No. 1:1960(2000) Specification for Plugs made of resilient material Two - pole and Earthing - pin Plugs, Socket - outlets, and Socket - outlet Adaptors for circuits up to 250 volts

RU-GOST R, Seat pressure

• GOST 19936-1974 Bases of dies for die casting. Design and dimensions
• GOST 22071-1976 Struts of injection moulds. Desing and dimensions

Korean Agency for Technology and Standards (KATS), Seat pressure

• KS B 6725-2015 Saddle supported horizontal pressure vessels
• KS W 3114-2003 Aircraft-Ground pressure testing connections for pressure cabins
• KS B 6725-1995 Saddle supported horizontal pressure vessels
• KS B 6725-2015(2020) Saddle supported horizontal pressure vessels
• KS P ISO TR 16840-9:2017 Wheelchair seating ─ Part 9: Clinical interface pressure mapping guidelines for seating
• KS M 3833-2012(2017) Polypropylene(PP) fittings for pipes under pressure-sockets for fusion using heated tools-metric series-dimensions of sockets
• KS R ISO 9817-2015(2020) Passenger cars－Engine cooling systems－Dimensions ofpressure caps and their ramp seats on filler necks

Military Standard of the People's Republic of China-General Armament Department, Seat pressure

• GJB 646-1988 Cabin Pressure System Physiological Requirements
• GJB 646A-2021 Physiological requirements for aircraft cabin pressure system

British Standards Institution (BSI), Seat pressure

• PD ISO/TR 16840-9:2015 Wheelchair seating. Clinical interface pressure mapping guidelines for seating
• BS 5276-2:2003 Pressure vessel details (dimensions) - Specification for saddle supports for horizontal cylindrical pressure vessels
• BS PD ISO/TR 16840-9:2015 Wheelchair seating. Clinical interface pressure mapping guidelines for seating
• BS EN 14830:2006 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
• PD 6497:1982 Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982

IT-UNI, Seat pressure

• UNI 4664-1961
• UNI 7552-1976

CZ-CSN, Seat pressure

• CSN 69 0010 Cast.4.21-1990 Stationary pressure vessels. Technical eguirements. Design. Supporting ba- es of pressure vessels
• CSN 13 7518-1973 Pressure gauge testing pin valves with pipe coupling
• CSN 69 0016-1981 Stationary pressure vessels. Calculation f supporting bases of tall vertical ressure vessels

International Organization for Standardization (ISO), Seat pressure

• ISO 11:1987 Aircraft; Ground pressure testing connections for pressure cabins
• ISO/TR 16840-9:2015 Wheelchair seating - Part 9: Clinical interface pressure mapping guidelines for seating
• ISO 4600:1992 Plastics; determination of environmental stress cracking (ESC); ball or pin impression method
• ISO 9133:1988 Passenger cars; engine cooling systems; threaded pressure caps and their seats on filler necks
• ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method

PL-PKN, Seat pressure

• PN M42304-1988 Pointer pressure gauges with elastic lement
• PN M42333-1987 Peinter pressure gauges with lastic elements r rescue ?uipment
• PN H74163-1962 Cast iron castings for pressur? main lines. 90° sooket bends with sorewed-gland joint
• PN H74161-1962 Cast iron special castings for pressure main lines. Socket tapers with screwed-gland Joint
• PN H74151-1962 Cast iron pipes and special castings for pressure main lines. Sockets with screwed-gland 3oint. Dimensions
• PN M74193-1972 Industrial fittings Direct check valves with connectors for welding on working under nominal pressure up to 40 kgf/sq.cm
• PN M74191-1972 IricListrial fittings Direct stop-valves with connectors for welding on werking under nomi nal pressure 40 kgf/sq ? cm
• PN M74194-1972 Industrial fittings Direct check valves with connectors for welding on working under nominal pressure 64 and100 kgf/sq. cm

Japanese Industrial Standards Committee (JISC), Seat pressure

• JIS B 8278:1993 Saddle supported horizontal pressure vessels
• JIS B 8278:2003 Saddle supported horizontal pressure vessels
• JIS B 8388:2000 Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements
• JIS B 8389:2000 Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements

Taiwan Provincial Standard of the People's Republic of China, Seat pressure

• CNS 9796-2001 Saddle supported horizontal pressure vessels
• CNS 8201-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Duckfoot Bends
• CNS 850-1982 Ductile Cast Iron Special Castings for Pressure Main Lines, Double Flanged Duckfoot Bends. (DFDB)

KR-KS, Seat pressure

• KS P ISO TR 16840-9-2017 Wheelchair seating ─ Part 9: Clinical interface pressure mapping guidelines for seating
• KS P ISO TR 16840-9-2022 Wheelchair seating — Part 9: Clinical interface pressure mapping guidelines for seating

Professional Standard - Textile, Seat pressure

• FZ/T 70015-2022 Measuring method and evaluation of pressure in knitted tights

GOSTR, Seat pressure

• GOST R 58509-2019 Wheelchair seating. Part 9. Clinical interface pressure mapping guidelines for seating

Association Francaise de Normalisation, Seat pressure

• FD S96-150-9*FD ISO/TR 16840-9:2015 Wheelchairs seating - Part 9 : clinical interface pressure mapping guidelines for seating
• NF E63-083:1990 Press tools. Die holder for quick release punches.
• NF P16-368*NF EN 14830:2007 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
• FD ISO/TR 16840-9:2015 Sièges de fauteuils roulants - Partie 9 : lignes directrices pour l'utilisation d'un système de mappage de pression
• NF E63-073:2010 Tools for pressing - Guide pillar mountings with self-oiling rings for gliding guiding.
• NF T51-170-4*NF EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4 : ball or pin impression method.
• NF C61-503/A42*NF EN 60061-3/A42:2011 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges
• NF E49-060:1990 Pneumatic fluid power. Directional control valve with four ports. Mounting surfaces of subplate. Pipe thread.
• NF E49-066:1990 Pneumatic fluid power. Directional control valve with three ports. Mounting surfaces of subplate. Pipe thread.

NZ-SNZ, Seat pressure

• SA/SNZ TR ISO 16840.9:2015 Wheelchair seating Part 9: Clinical interface pressure mapping guidelines for seating

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Seat pressure

• GJB 5103/22-2006 Detail specification for receptacle of single hole mount bayonet coupling pin contact

HU-MSZT, Seat pressure

• MSZ 15002/2-1987
• MNOSZ 12990-1954
• MNOSZ 12991-1954

ZA-SANS, Seat pressure

• SANS 3228:2005 Rolling bearings - Cast and pressed housings for insert bearings

GB-REG, Seat pressure

• REG NASA-LLIS-0546-1996 Lessons Learned ?Venting Design for Small Pressure Changes

Indonesia Standards, Seat pressure

• SNI 07-0949-1989 Carbon steel plate for steam boilers and pressure vessels

RO-ASRO, Seat pressure

• STAS 12942-1991 Lubricating greases. High pressures resistance determination on toothed wheels stand
• STAS 8425-1980 ASBESTOS-CEMENT TUBES AND SOCKETS FOR PRESSURE PIPES ND 150 ... ND 400 Dimensions
• STAS 8425-1986 ASBESTOS-CEMENT TUBES AND SOCKETS FOR PRESSUHE PIPES Nd 100. ..Nd 600 Dimensions
• STAS 1867-1975 Cast iron pressure pipes and fittings SIMPLE SOCKET 45° BRANCH NP 10 Dimensions
• STAS 9986-1974 Cast iron pressure pipes and fittings DOUBLE SOCKET TEE WITH FLANGED BRANCH NP 10 Dimensions

FI-SFS, Seat pressure

• SFS 2966-1987

Professional Standard - Aviation, Seat pressure

• HB 6497-1991 General specification for aviation pneumatic cabin pressure regulators

European Committee for Standardization (CEN), Seat pressure

• EN ISO 4600:1997 ISO 4600: 1992
• EN 14830:2006 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

API - American Petroleum Institute, Seat pressure

• API RP 525-1960 TESTING PROCEDURE FOR PRESSURE-RELIEVING DEVICES DISCHARGING AGAINST VARIABLABLE BACK PRESSURE (First Edition)

AT-ON, Seat pressure

• ONORM E 1365-1971 Apparatus for pressure test on plugs and portable socket-oullels.
• ONORM E 6622-11-1996 Plugs and socket-outlets for house-installations and similar purposes - Two pole built-in and non-rewirable portable socket-outlets 2,5 A, 250 V and gauges

U.S. Air Force, Seat pressure

• AIR FORCE MIL-I-25091 B NOTICE 1-1997 INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2
• AIR FORCE MIL-I-25091 B-1985 INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2

ES-AENOR, Seat pressure

• UNE 53-465-1990

Professional Standard - Light Industry, Seat pressure

• QB/T 2072.4-1994 Steel suspension support for general parts of sugar machinery pressure vessel

IX-EU/EC, Seat pressure

• COM(96) 674 FINAL-1997 Proposal for a Council Directive on Transportable Pressure Equipment

Society of Automotive Engineers (SAE), Seat pressure

• SAE J3105/3-2020 Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Enclosed Pin and Socket Connection
• SAE AS39029/44A-2008 Contacts, Electrical Connector, Pin, Socket, Crimp Removable (For MIL-DTL-5015 Series MS3400 Connectors)
• SAE AS34541B-2014 CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE
• SAE AS34041-1998 Connectors, Receptacle, Electric, Jam Nut Mounting, Front Release, Crimp Contact, AN Type FSC 5935

PK-PSQCA, Seat pressure

• PS 1636-1984 SPECIFICATION FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC) FITT-INGS WITH PLAIN SOCKETS FOR PIPES UNDER PRESS-URE-DIMENSIONS OF SOCKETS-METRIC SERIES.

United States Navy, Seat pressure

• NAVY MS28063 REV A NOTICE 2-1996 GAGES, PRESSURE, ENGINE AND UTILITY, 2-INCH, FLANGE- OR PORT-MOUNTED, BOTTOM PORT
• NAVY MS28063 REV A VALID NOTICE 1-1991 GAGES, PRESSURE, ENGINE AND UTILITY, 2-INCH, FLANGE- OR PORT-MOUNTED, BOTTOM PORT
• NAVY MS28063 REV A-1959 GAGES, PRESSURE, ENGINE AND UTILITY, 2-INCH, FLANGE- OR PORT-MOUNTED, BOTTOM PORT

(U.S.) Ford Automotive Standards, Seat pressure

• FORD ESB-M3G149-A-2012 TAPE, RUBBER BASE - TWO SIDE PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M3G195-A-2021 TAPE, ACRYLIC BASE, TWO SIDE PRESSURE SENSITIVE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

DE-GPVA, Seat pressure

• AD 2000-Merkblatt S3/2-2004 Special cases.General verification of stability for pressure vessels.Verification of load-carrying capacity for horizontal vessels on saddle supports

Electronic Components, Assemblies and Materials Association, Seat pressure

• ECA 364-86-1996 TP-86 Polarizing/Coding Key Overstress Test Procedure for Electrical Connectors and Sockets

Lithuanian Standards Office , Seat pressure

• LST EN 60309-2-1999 Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchange ability requirements for pin and contact-tube accessories (IEC 60309-2:1999)

Standard Association of Australia （SAA）, Seat pressure

• AS 4899:2007 Pin insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c.

SAE - SAE International, Seat pressure

• SAE AS34541-1998 Connectors@ Receptacle@ Electrical@ Jam Nut Mounting@ Rear Release Crimp Contact@ AN Type (Should Be Used Instead of MS3454)
• SAE AS34541A-2012 CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE

American Society of Mechanical Engineers (ASME), Seat pressure

• ASME 1923-4-2001 Restricting Lift to Achieve Reduced Relieving Capacities of Full Lift, Nozzle Type, Flat Seated Safety and Safety Relief Valves Section I (SUPP 8&9)

Others:   Test pin, Power 2-pin header, Seat method, Luer hub, Seat Adjustment, Seat Adjustment, Luer hub, How to remove the needle seat, Seat processing, Seat x, needle pressure, Seat back plug, Needle seat, Seat inspection, The purpose of the needle seat, Seat pressure.