ZH
RU
ES

Needle seat

Needle seat, Total:228 items.

In the international standard classification, Needle seat involves: Technical drawings, Non-ferrous metals, Textile machinery, Medical equipment, Products of non-ferrous metals, Electrical accessories, Medical sciences and health care facilities in general, Aerospace electric equipment and systems, Wood, sawlogs and sawn timber, Iron and steel products, Printed circuits and boards, Bearings, Services, Microprocessor systems, Interface and interconnection equipment, Processes of the textile industry, Pipeline components and pipelines, Products of the textile industry, Mechanical testing, Clothes, Internal combustion engines for road vehicles, Environmental protection, Buildings, Dentistry, Components and accessories for telecommunications equipment, Protective equipment, Electromechanical components for electronic and telecommunications equipment, Transport, Road vehicle systems, Aircraft and space vehicles in general, Headgear. Clothing accessories. Fastening of clothing.


German Institute for Standardization, Needle seat

  • DIN 58553:1996 Needle holders for drawing instruments
  • DIN 5319:1978 Industrial sewing machines; presser bar with prismatical support, fitting dimensions
  • DIN 46268-2:1988 Circular connectors; snap-in pin for 3,5 mm snap-in receptacles
  • DIN 46268-1:1988 Circular connectors; snap-in receptacle for 3,5 mm snap-in pin
  • DIN 46231:1970-07 Pin type cable-sockets for solderless connections, insulated, for copper conductors
  • DIN 13097-5:2008 Hypodermic needles - Part 5: Sockets, hubs and connections - Requirements and testing
  • DIN 58298-19:2002-07 Materials, finish and testing of medical instruments - Part 19: Trocars
  • DIN EN 4531-003:2012-07 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard; German and English version EN 4531-003:2012
  • DIN EN 4531-004:2012-07 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard; German and English version EN 4531-004:2012
  • DIN EN ISO 13936-3:2007-05 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method (ISO 13936-3:2005); German version EN ISO 13936-3:2007

Professional Standard - Non-ferrous Metal, Needle seat

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Needle seat

  • GB/T 4428-1984 Leaded brass bar for making needle seat of syringe
  • GB/T 7497.3-2008 Microprocessor system bus.8-bit and 16-bit data(MULTIBUS I).Part 3:Mechanical and pin descriptions for the Eurocard configuration with pin and socket(indirect) connectors
  • GB/T 7497.3-1987 Microprocessor system bus I, 8-bit and 16-bit data--Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
  • GB/T 13772.3-2008 Textiles.Determination of the slippage resistance of yarns at a seam in woven fabrics.Part 3: Needle clamp method

Professional Standard - Textile, Needle seat

  • FZ/T 97034-2014 General technical requirements for needle bed bases of flat knitting machines
  • FZ/T 70016-2022 Test method for spandex slippage at seams of knitted fabrics

British Standards Institution (BSI), Needle seat

  • BS 3522:1962 Specification for hypodermic surgical mounted needles (Luer fitting)
  • BS 546:1950 Specification - Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors
  • BS ISO 7026:1998 Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'
  • BS EN 60309-2:1998 Plugs, socket-outlets and couplers for industrial purposes. Dimensional interchangeability requirements for pin and contact-tube accessories
  • BS EN 60309-2:1999+A2:2012 Plugs, socket-outlets and couplers for industrial purposes. Dimensional interchangeability requirements for pin and contact-tube accessories

IN-BIS, Needle seat

PL-PKN, Needle seat

United States Navy, Needle seat

Society of Automotive Engineers (SAE), Needle seat

  • SAE J928-2022 Electrical Terminals - Pin and Receptacle Type
  • SAE AS39029/44A-2008 Contacts, Electrical Connector, Pin, Socket, Crimp Removable (For MIL-DTL-5015 Series MS3400 Connectors)
  • SAE J3105/3-2020 Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Enclosed Pin and Socket Connection
  • SAE AS7102A-1995 National Aerospace and Defense Contractors Accreditation Program Requirements for Heat Treating

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Needle seat

HU-MSZT, Needle seat

Professional Standard - Aviation, Needle seat

  • HB 5874-1985 General Technical Requirements for Pins and Jacks of Aircraft Plugs

RU-GOST R, Needle seat

  • GOST 10950-2013 Coniferous sawn timber. Antiseptic surface treatment
  • GOST 26289-1984 Fabrics for underwear. Norms of determining linear measurements after wet treatment
  • GOST R 51729-2001 Knitted garments. Method of determining change in linear dimensions after wet treatment
  • GOST 31423-2010 Knitted garments. Method of determining the change in linear dimensions after wet treatment
  • GOST 13711-1982 Knitted fabrics. Method of determination change in linear dimensions after wet treatments
  • GOST 30395.1-1995 Dental root-canal instruments. Part 1. Files reamers, Barbed broaches, rasps, paste carriers, explorers and cotton broaches
  • GOST R ISO 13936-3-2012 Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Part 3. Needle clamp method
  • GOST R 51266-1999 Automobile transport facilities. Visibility from the driver's seat. Technical requirements. Test methods
  • GOST 18081-1993 Narrow fabrics, braids and knitted fabrics. Method of determining change in linear dimensions after wet treatments
  • GOST R 50235-1992 Narrow fabrics, braids and knitted fabrics. Method of determining change in linear dimensions after wet treatments

AENOR, Needle seat

  • UNE 21796-3:1994 MICROPOCESSOR SYSTEM BUS I 8-BIT AND 16 BIT DATA. PART 3: MECHANICAL AND PIN DESCRIPTIONS FOR THE EUROCARD CONFIGURATION WITH PIN AND SOCKET (INDIRECT) CONNECTORS.
  • UNE 28025:1959 PINS AND SOCKET BASS FOR DERIVATION TO EARTH OF TERMINALS OF FUEL SUPPLY PIPELINES OF AIRCRAFTS ON LAND.
  • UNE-EN 60309-2/A11:2004 Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
  • UNE-EN 60309-2:2001 Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories.
  • UNE-EN 60309-2:2001/A2:2013 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

NEMA - National Electrical Manufacturers Association, Needle seat

  • NEMA PR 3-1980 GUIDE TO PIN AND SLEEVE PLUGS@ RECEPTACLES@ AND CONNECTORS
  • NEMA PR 3-1986 GUIDE TO PIN AND SLEEVE PLUGS@ RECEPTACLES@ AND CONNECTORS (WITHDRAWN)
  • NEMA FB 11-1983 Plugs@ Receptacles@ and Connectors of the Pin and Sleeve Type for Hazardous Locations
  • NEMA LSD 29-2019 Incompatibility of T8 Ballasts (RS@ PS@ Dimming) and “Shunted” Bi-Pin Lampholders
  • NEMA PR 4-1983 Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type for Industrial Use
  • NEMA C78.1413-1982 DIMENSIONS AND CENTERING SYSTEMS FOR PROJECTION LAMPS - TWO-INCH INTEGRAL REFLECTOR LAMP WITH TWO-PIN GLASS BASE GX5.3 OR GY5.3

CZ-CSN, Needle seat

  • CSN 42 6460-1960 Steel wire, cold drawn, heat treated for card sheets
  • CSN 48 2702-1963 Aerial and terrestrial treatment o? forest stands against harmful insects
  • CSN 80 0866-1989 Textile materials. Knitted goods. Me- thod of determination of changes in dimensions after wet processing

Association Francaise de Normalisation, Needle seat

  • NF EN IEC 60309-2:2022 Fiches, socles fixes de prise de courant, prises mobiles et socles de connecteur pour usages industriels - Partie 2 : Exigences dimensionnelles de compatibilité pour les appareils à broches et alvéoles
  • NF C93-404-Ⅲ:1991 Electronic Components Pin Grid Array Socket Type SC 05 Detail Requirements
  • NF L54-510:1951 Appareillage électrique pour aéronefs - Prise de courant d'aérodrome à broches de 20 mm.
  • NF C93-404-Ⅳ:1991 Electronic Components Pin Grid Array Socket Type SC 06 Detail Requirements
  • NF EN IEC 62196-2:2022 Fiches, socles de prise de courant, prises mobiles de véhicule et socles de connecteurs de véhicule - Charge conductive des véhicules électriques - Partie 2 : exigences dimensionnelles de compatibilité pour les appareils à broches et alvéoles po...
  • NF R16-319:1992 Road vehicles. Screw-in injection nozzle holders, types 20, 21 and 27 for pintle nozzle size "S", type "B".
  • NF S90-116:2020 Medical gas pipeline distribution systems - Sockets and related probes for medical fluids - Design and installation
  • NF S71-514:1997 Personal protective equipment for prevention of falls from a height. Sit harnesses.
  • NF C63-310*NF EN 60309-2:1999 Plugs, socket-outlets and couplers for industrial purposes - Part 2 : dimensional interchangeability requirements for pin and contact-tube accessories

National Electrical Manufacturers Association（NEMA), Needle seat

  • NEMA C78.1402-1975 Dimensions for Projection Lamps - Four-Pin, Prefocus, Base-Down Type R(1994)
  • NEMA FB 11-2000 Plugs, Receptacles, and Connectors of the Pin and Sleeve Type for Hazardous Locations
  • NEMA C78.1407-1985 Electric Lamps - Condenser-Reflector, Four-Pin, Prefocus-Base Projection Lamps - Dimensions R(1995)

Lithuanian Standards Office , Needle seat

  • LST HD 593.3 S1-2002 Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS I). Part 3: mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors (IEC 60796-3:1990)
  • LST EN 4531-004-2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard
  • LST EN 4531-003-2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard

International Organization for Standardization (ISO), Needle seat

  • ISO 3030-1:1974 Needle roller bearings — Needle roller and cage assemblies — Metric series — Part 1: Radial needle roller and cage assemblies — Boundary dimensions and tolerances

Underwriters Laboratories (UL), Needle seat

  • UL 1682 BULLETIN-2002 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682 BULLETIN-2003 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682 BULLETIN-2001 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682 BULLETIN-2004 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
  • UL 1682-2002 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Second Edition)
  • UL 1682-2017 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Fifth Edition)
  • UL 1682-2007 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Third Edition)
  • UL 1682 BULLETINS-2001 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (10/05/2001 (76p); 01/31/2001 (80p))
  • UL 1682 BULLETINS-2006 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (10/13/2006 (70p); 04/20/2006 (68p))
  • UL 1682 BULLETIN-2015 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: December 16@ 2015)
  • UL 1682 BULLETIN-2016 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: November 28@ 2016)

The Aluminum Association, Needle seat

  • AA TRBR-2000 Technology Roadmap for Bauxite Residue Treatment and Utilization

Group Standards of the People's Republic of China, Needle seat

  • T/WWYLX 005-2020 Prevention and targeted treatment of psychological problems in the elderly
  • T/CKIA 3.2-2019 Knitted fabric open width continuous wet processing technology part 2: post-treatment
  • T/CKIA 3.1-2019 Knitted fabric open width continuous wet processing technology part 1: pretreatment

International Electrotechnical Commission (IEC), Needle seat

  • IEC 60796-3:1990 Microprocessor system BUS I, 8-bit and 16-bit data; part 3: mechanical and pin descriptions for the eurocard configuration with pin and socket (indirect) connectors
  • IEC 60149-2A:1968 Sockets and accessories for electronic plug-in devices. Part 2 : Specification sheets for sockets and dimensions of wiring jigs and pin straighteners.
  • IEC 60149-2:1965 Sockets and accessories for electronic plug-in devices. Part 2 : Specification sheets for sockets and dimensions of wiring jigs and pin straighteners

ZA-SANS, Needle seat

  • SANS 1409:2008 Outlet sockets and probes for medical (gas and vacuum) services used in hospitals
  • SANS 1409:2004 Outlet sockets and probes for medical (gas and vacuum) services used in hospitals

Military Standards (MIL-STD), Needle seat

American Society for Testing and Materials (ASTM), Needle seat

  • ASTM F2430-04 Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Needle seat

  • GJB 5103/8-2006 Detail specification for receptacle of single hole mount threaded coupling solder pin contact
  • GJB 5103/9-2006 Detail specification for receptacle of single hole mount
  • GJB 5103/15-2006 Detail specification for receptacle of single hole mount bayonet coupling straight pin contact
  • GJB 5103/3-2006 Detail specification for receptacle of flange mount threaded coupling solder pin contact
  • GJB 5103/19-2006 Detail specification for receptacle of solder flange mount bayonet coupling solder pin contact
  • GJB 5103/22-2006 Detail specification for receptacle of single hole mount bayonet coupling pin contact
  • GJB 5103/21-2006 Detail specification for receptacle of solder flange mount bayonet coupling straight pin contact
  • GJB 5103/2-2006 Detail specification for receptacle of flange mount threaded coupling solder pin contact
  • GJB 5103/20-2006 Detail specification for receptacle of solder flange mount bayonet coupling solder pin contact

(U.S.) Ford Automotive Standards, Needle seat

  • FORD WSS-M1H890-A2-2015 FABRIC, MORTAR PATTERN, KNIT, SEAT ARMREST ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99H150-A-2005 SHEETING, NON WOVEN, NEEDLED POLYESTER, SEATS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1H1021-A-2006 FABRIC, JACKIE PATTERN, KNIT SEAT FACINGS/SEAT BACKS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1H1097-A-2008 FABRIC, BIRMINGHAM PATTERN, KNIT TREATED WITH REPELLANT FINISH ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1H1022-A2-2008 FABRIC, DUKE II RF PATTERN, WARP KNIT TREATED WITH REPELLANT FINISH ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1H1079-A11-2021 FABRIC, MATCHPOINT PATTERN, WARP KNIT, 100% VIRGIN WITH SOIL REPELLANT ***TO BE USED WITH FORD WSS-M99P1111-A***

Defense Logistics Agency, Needle seat

American National Standards Institute （ANSI), Needle seat

  • ANSI/UL 1682-2013 Standard for Safety For Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type
  • ANSI/EIA 540AD00:1991 Adapter-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Blank Detail Specification for

SE-SIS, Needle seat

  • SIS SS 84 40 11-1986 Flexible intermediate bulk containers-General guidelines for handling etc
  • SIS SS-ISO 7026:1983 Road vehicles - Screw-in injection nozzle holder types 20 and 21 for pintle nozzle size "S", type "B"

ECIA - Electronic Components Industry Association, Needle seat

  • EIA-540BAAC-1991 Detail Specification Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment
  • EIA-364-60A-2008 TP-60A General Methods for Testing of Contact Finishes for Electrical Connectors and Sockets
  • EIA/ECA-364-60A-2008 TP-60A GENERAL METHODS FOR TESTING OF CONTACT FINISHES FOR ELECTRICAL CONNECTORS AND SOCKETS
  • 540B000-1989 "Sectional Specification Sockets for Pin Grid Array Devices With 2.54 mm x 2.54 mm (0.1"" x 0.1"") Spacing for Use in Electronic Equipment"

American Society of Quality Control （ASQC), Needle seat

  • ASQ Q10002-2004 Quality management Customer satisfaction Guidelines for complaints handling in organizations T813

Korean Agency for Technology and Standards (KATS), Needle seat

  • KS F 1507-1998 ESTIMATION OF POPULATION FOR WATER CLOSET WASTES DISPOSAL PLANT OF BUILDINGS
  • KS F 1507-1983 ESTIMATION OF POPULATION FOR WATER CLOSET WASTES DISPOSAL PLANT OF BUILDINGS
  • KS C IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes — Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
  • KS K ISO 13936-3:2018 Textiles－Determination of the slippage resistance of yarns at a seam in woven fabrics－Part 3：Needle clamp method

KR-KS, Needle seat

  • KS C IEC 60309-2-2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes — Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
  • KS K ISO 13936-3-2018(2023) Textiles－Determination of the slippage resistance of yarns at a seam in woven fabrics－Part 3：Needle clamp method
  • KS K ISO 13936-3-2018 Textiles－Determination of the slippage resistance of yarns at a seam in woven fabrics－Part 3：Needle clamp method

未注明发布机构, Needle seat

  • BS 546:1950 Supplement No. 1:1960(2000) Specification for Plugs made of resilient material Two - pole and Earthing - pin Plugs, Socket - outlets, and Socket - outlet Adaptors for circuits up to 250 volts

CU-NC, Needle seat

  • NC 33-45-1985 Oil and Oil Derivatives. Vertical Steel Tanks. Proceeding for Bottom Replacement

ES-UNE, Needle seat

  • UNE-EN IEC 60309-2:2023 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
  • UNE-EN 4531-004:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard (Endorsed by AENOR in July of 2012.)
  • UNE-EN 4531-003:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard (Endorsed by AENOR in July of 2012.)

Military Standard of the People's Republic of China-General Armament Department, Needle seat

  • GJB 598/11-2011 Detail specification for series 2 JY3449 bayonet coupling solder pin contact jam nut mounting receptacle (class H)
  • GJB 598/8-2011 Detail specification for series 2 JY3440 bayonet coupling solder contact narrow flange mount receptacle (class H)
  • GJB 598/9-2011 Detail specification for series 2 JY3442 bayonet coupling solder pin contact wide flange mount receptacle (class H)

Professional Standard - Electron, Needle seat

  • SJ 50976/18-2002 Connectors,receptacle,coaxial,radio frequency series 2.92,pin contact,scred mounted,for micro-strip,detail specification for
  • SJ 50976/16-2002 Connectors,receptacle,coaxial,radio frequency series 2.92,pin contact,flange mounted,for micro-strip detail specification for
  • SJ 50976/13-1999 Conectors,receptacle,coaxial,radio frequency type BMA-JFD,Pin contact,flange mounted,for micro-strip,detail specification for
  • SJ 50976/15-1999 Conectors,receptacle,coaxial,radio frequency type BMA-JYD,pin contact,screw mounted,for micro-strip,detail specification for
  • SJ 50681/81-1999 Conectors,receptacle,coaxial,radio frequency type BMA-JY5Y,pin contact,screw mounted for flexible cable,detail specification for
  • SJ 50681/79-1999 Conectors,receptacle,coaxial,radio frequency type BMA-JYB3,pin contact,screw mounted,for semi-rigid cable,detail specification for
  • SJ 50681/49-1994 Connectors,receptacle,electrical,coaxial,radio frequency(series SMC(uncabled),pin contact,jamnut,mounted,class 2),detail specification for

Danish Standards Foundation, Needle seat

  • DS/EN 4531-003:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard
  • DS/EN 4531-004:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard
  • DS/EN ISO 13936-3:2007 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method
  • DS/EN 60309-2/A1:2008 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
  • DS/EN 60309-2:2000 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
  • DS/EN 60309-2/A2:2012 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

Institute of Electrical and Electronics Engineers (IEEE), Needle seat

Aerospace, Security and Defence Industries Association of Europe (ASD), Needle seat

  • ASD-STAN PREN 4531-003-2010 Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 003: Square flange receptacle Product standard (Edition P 2)
  • ASD-STAN PREN 4531-004-2010 Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 004: Jam nut receptacle Product standard (Edition P 2)

Electronic Components, Assemblies and Materials Association, Needle seat

  • ECA EIA-364-60A-2008 TP-60A General Methods for Testing of Contact Finishes for Electrical Connectors and Sockets

AIA/NAS - Aerospace Industries Association of America Inc., Needle seat

  • NAS1693-1979 Connector@ Receptacle@ Electrical@ Single-Hole Mount@ Thread Coupling@ Conductive Finish (Rev 1)

  Test pin, Power 2-pin header, Seat method, Luer hub, Seat Adjustment, Seat Adjustment, Luer hub, How to remove the needle seat, Seat processing, Seat x, Seat back plug, Needle seat, Seat inspection, The purpose of the needle seat, Seat pressure.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved