ZH
RU
ES

Scanning Probe Detection

Scanning Probe Detection, Total:124 items.

In the international standard classification, Scanning Probe Detection involves: Analytical chemistry, Optics and optical measurements, Education, Optical equipment, Non-ferrous metals, Vocabularies, Linear and angular measurements, Mechanical testing, Electromagnetic compatibility (EMC), Road vehicle systems, Non-destructive testing, Machine tools, Glass, Electrical and electronic testing, Testing of metals, Veterinary medicine, Farming and forestry, Construction materials, Plastics, Reinforced plastics, Electricity. Magnetism. Electrical and magnetic measurements, Semiconducting materials, Soil quality. Pedology.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Scanning Probe Detection

GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
GB/T 29190-2012 Measurement methods of drift rate of scanning probe microscope
GB/T 17359-1998 General specification of X-ray EDS quantitative analysis for EPMA and SEM
GB/T 22461.2-2023 Glossary of Surface Chemical Analysis Part 2: Scanning Probe Microscopy Terminology
GB/T 42543-2023 Determination of the Normal Elastic Constant of a Cantilever Beam by Surface Chemical Analysis Scanning Probe Microscopy
GB/T 30020-2013 Test method for the defects of glass.Photoelastic scanning method
GB/T 30020-2023 Glass defect detection method photoelastic scanning method
GB/T 15075-1994 Method for testing EPMA instrument
GB/T 38537-2020 Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method
GB/T 16857.5-2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
GB/T 25758.1-2010 Non-destructive testing.Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing.Part 1:Scanning method

National Metrological Technical Specifications of the People's Republic of China, Scanning Probe Detection

JJF 1351-2012 Calibration Specification for Scanning Probe Microscopes

Professional Standard - Education, Scanning Probe Detection

JY/T 0582-2020 General Rules for Scanning Probe Microscopy Analytical Methods

Korean Agency for Technology and Standards (KATS), Scanning Probe Detection

KS D 2714-2006 Scanning probe microscope-Method for lateral force microscope
KS D 2714-2016(2021) Scanning probe microscope－Method for lateral force microscope
KS D 2714-2016 Scanning probe microscope－Method for lateral force microscope
KS B ISO 23159:2022 Non-destructive testing — Gamma ray scanning method on process columns
KS M ISO 11357-4:2012 Plastics-Differential scanning calorimetry(DSC)-Part 4:Determination of specific heat capacity
KS M ISO 11357-4:2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity

Fujian Provincial Standard of the People's Republic of China, Scanning Probe Detection

DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection

International Organization for Standardization (ISO), Scanning Probe Detection

ISO 28600:2011 Surface chemical analysis - Data transfer format for scanning-probe microscopy
ISO 11039:2012 Surface chemical analysis - Scanning-probe microscopy - Measurement of drift rate
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO 18115-2:2010 Analyse chimique des surfaces — Vocabulaire — Partie 2: Termes utilisés en microscopie à sonde à balayage (Première édition)
ISO 11775:2015 Surface chemical analysis - Scanning-probe microscopy - Determination of cantilever normal spring constants
ISO 18115-2:2013 Surface chemical analysis.Vocabulary.Part 2: Terms used in scanning-probe microscopy
ISO 18115-2:2021 Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 230-10:2011/Amd 1:2014 Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools - Amendment 1: Measuring performance with scanning probes
ISO 13083:2015 Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
ISO 23159:2020 Non-destructive testing — Gamma ray scanning method on process columns
ISO 27911:2011 Surface chemical analysis - Scanning-probe microscopy - Definition and calibration of the lateral resolution of a near-field optical microscope
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 15548-2:2008 Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification
ISO 15708-4:2017 Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification
ISO 15708-1:2017 Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology
ISO/CD 15708-4:2023 Non-destructive testing — Radiation methods for computed tomography — Part 4: Qualification
ISO 15708-3:2017 Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation
ISO 10360-5:2020 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus co

British Standards Institution (BSI), Scanning Probe Detection

BS ISO 18115-2:2010 Surface chemical analysis - Vocabulary - Terms used in scanning-probe microscopy
BS ISO 18115-2:2013 Surface chemical analysis. Vocabulary. Terms used in scanning-probe microscopy
BS ISO 28600:2011 Surface chemical analysis. Data transfer format for scanning-probe microscopy
BS ISO 11775:2015 Surface chemical analysis. Scanning-probe microscopy. Determination of cantilever normal spring constants
BS ISO 18115-2:2021 Surface chemical analysis. Vocabulary - Terms used in scanning-probe microscopy
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
BS ISO 13083:2015 Surface chemical analysis. Scanning probe microscopy. Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
BS ISO 11039:2012 Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate
12/30265696 DC BS ISO 18115-2 AMD1. Surface chemical analysis. Vocabulary. Part 2. Terms used in scanning-probe microscopy
BS ISO 27911:2011 Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
BS EN ISO 15548-2:2008 Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification
BS EN ISO 15548-2:2013 Non-destructive testing. Equipment for eddy current examination. Probe characteristics and verification
BS EN 16016-1:2011 Non destructive testing. Radiation methods. Computed tomography. Terminology
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
19/30373364 DC BS ISO 23159. Non-destructive testing. Gamma ray scanning method on process columns
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method

Association of German Mechanical Engineers, Scanning Probe Detection

VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Scanning Probe Detection

GB/T 36052-2018 Surface chemical analysis—Data transfer format for scanning probe microscopy
GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems

未注明发布机构, Scanning Probe Detection

JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants

RU-GOST R, Scanning Probe Detection

GOST 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST R 8.635-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
GOST R 8.700-2010 State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope
GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
GOST R ISO 27911-2015 State system for ensuring the uniformity of measurements. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope

Association Francaise de Normalisation, Scanning Probe Detection

NF X21-069-2:2010 Surface chemical analysis - Vocabulary - Part 2 : terms used in scanning-probe microscopy.
NF E60-100-10/A1:2014 Test code for machine tools - Part 10 : determination of measuring performance of probing systems of numerically controlled machines tools - Amendment 1 : measuring performance with scanning probes
NF EN ISO 15708-1:2019 Essais non destructifs - Méthodes par rayonnements pour la tomographie informatisée - Partie 1 : terminologie
NF EN ISO 15708-4:2019 Essais non destructifs - Méthodes par rayonnements pour la tomographie informatisée - Partie 4 : qualification
NF A09-261-4*NF EN ISO 15708-4:2019 Non-destructive testing - Radiation methods for computed tomography - Part 4 : qualification
NF EN 12543-1:1999 Essais non destructifs - Caractéristiques des foyers émissifs des tubes radiogènes industriels utilises dans les essais non destructifs - Partie 1 : méthode par balayage

Japanese Industrial Standards Committee (JISC), Scanning Probe Detection

JIS K 0147-2:2017 Surface chemical analysis -- Vocabulary -- Part 2: Terms used in scanning-probe microscopy
JIS Z 2316-3:2014 Non-destructive testing -- Eddy current testing -- Part 3: Probe characteristics and verification

Society of Automotive Engineers (SAE), Scanning Probe Detection

SAE J1752-2-2003 Measurement of Radiated Emissions from Integrated CircuitsSurface Scan Method (Loop Probe Method) 10 MHz to 3 GHz
SAE J1752/2-1995 Measurement of Radiated Emissions From Integrated Circuits-Surface Scan Method (Loop Probe Method) 10 Mhz to 3 Ghz
SAE J1752/2-2011 Measurement of Radiated Emissions from Integrated Circuits—Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz
SAE J1752/2-2016 Measurement of Radiated Emissions from Integrated Circuits—Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz
SAE J1752/2-2003 Measurement of Radiated Emissions from Integrated Circuits -- Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz
SAE J1752-2-2011 Measurement of Radiated Emissions from Integrated Circuits Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz

SAE - SAE International, Scanning Probe Detection

SAE J1752-2-2016 Measurement of Radiated Emissions from Integrated Circuits-Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz

American Society for Testing and Materials (ASTM), Scanning Probe Detection

ASTM E1813-96e1 Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
ASTM E1813-96(2002) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
ASTM E1813-96(2007) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
ASTM E499-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM D8231-19 Standard Practice for the Use of a Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes
ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM F1621-96 Standard Practice for Determining the Positional Accuracy Capabilities of a Scanning Surface Inspection System
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers

German Institute for Standardization, Scanning Probe Detection

DIN 54136-1:1988 Non-destructive testing; magnetic leakage flux testing by scanning with probes; principles
DIN EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or sc
DIN EN 12543-1:1999-12 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999
DIN EN ISO 15708-1:2019-09 Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology (ISO 15708-1:2017); German version EN ISO 15708-1:2019
DIN EN ISO 15708-4:2019-09 Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2017); German version EN ISO 15708-4:2019
DIN EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999

SE-SIS, Scanning Probe Detection

SIS SS-IEC 1032:1992 Testprobes to verify protection by enclosures

IT-UNI, Scanning Probe Detection

UNI ISO 23159:2021 Non-destructive testing -- Gamma ray scanning method on process columns

Shaanxi Provincial Standard of the People's Republic of China, Scanning Probe Detection

DB61/T 1217-2018 Ultrasonic water immersion C-scan detection of deformed metal

International Electrotechnical Commission (IEC), Scanning Probe Detection

IEC TR 61032:1990 Test probes to verify protection by enclosures

National Metrological Verification Regulations of the People's Republic of China, Scanning Probe Detection

JJG 508-1987 Verification Regulation of Resistivity Measuring Instruments with Four-Prope Array Method

工业和信息化部, Scanning Probe Detection

JB/T 13467-2018 Non-destructive testing scanning laser excitation ultrasonic field visual inspection method

Professional Standard - Aviation, Scanning Probe Detection

HB 20095-2012 Inspection method for composite parts and structures using ultrasonic C-scan
HB 5460-1990 Ultrasonic penetrating C-scan detection method of honeycomb structure
HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4: Scanning electron microscopy and energy dispersive spectrometry

KR-KS, Scanning Probe Detection

KS B ISO 23159-2022 Non-destructive testing — Gamma ray scanning method on process columns

国家质量监督检验检疫总局, Scanning Probe Detection

SN/T 4704-2016 Isothermal detection of kinetic parameters Differential scanning calorimetry
SN/T 4821-2017 Bovine spinal deformity syndrome TaqMan probe PCR detection method

Group Standards of the People's Republic of China, Scanning Probe Detection

T/CSTM 00422-2022 Non-destructive testing — B-scan test method for low and medium frequency ultrasonic guided waves based on magnetostrictive effect
T/CIRA 42-2022

International Telecommunication Union (ITU), Scanning Probe Detection

ITU-R SM.1839 SPANISH-2007 Test procedure for measuring the scanning speed of radio monitoring receivers Procedimiento de prueba para medir la velocidad de exploraci髇 de los receptores de comprobaci髇 t閏nica radioel閏trica

国家市场监督管理总局、中国国家标准化管理委员会, Scanning Probe Detection

GB/T 39518-2020 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

Jilin Provincial Standard of the People's Republic of China, Scanning Probe Detection

DB22/T 3089-2019 Fluorescent PCR probe method for detection of sheep infectious impetigo virus

Professional Standard - Electron, Scanning Probe Detection

SJ/T 31122-1994 Requirements of readiness and methods of inspection and assessment for four-point probes
SJ/T 31123-1994 Requirements of readiness and methods of inspection and assessment for automatic multi-point test probes

European Committee for Standardization (CEN), Scanning Probe Detection

EN ISO 15548-2:2013 Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification

CEN - European Committee for Standardization, Scanning Probe Detection

EN ISO 15708-4:2019 Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification
EN ISO 15708-3:2019 Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation

Danish Standards Foundation, Scanning Probe Detection

DS/EN 16016-1:2011 Non destructive testing - Radiation methods - Computed tomography - Part 1: Terminology
DS/EN 16016-4:2011 Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification

Lithuanian Standards Office , Scanning Probe Detection

LST EN 16016-1-2011 Non destructive testing - Radiation methods - Computed tomography - Part 1: Terminology
LST EN 16016-4-2011 Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification

AENOR, Scanning Probe Detection

UNE-EN 16016-1:2012 Non destructive testing - Radiation methods - Computed tomography - Part 1: Terminology
UNE-EN 16016-4:2012 Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification

ES-UNE, Scanning Probe Detection

UNE-EN ISO 15708-1:2020 Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology (ISO 15708-1:2017)
UNE-EN ISO 15708-4:2020 Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2017)