ZH
RU
ES
Quantitative Quantitative Concentration
Quantitative Quantitative Concentration, Total:496 items.
In the international standard classification, Quantitative Quantitative Concentration involves: Air quality, Water quality, Particle size analysis. Sieving, Paints and varnishes, Analytical chemistry, Beverages, Wood-based panels, Environmental protection, Inorganic chemicals, Food products in general, Nuclear energy engineering, Animal feeding stuffs, Products of the chemical industry, Metalliferous minerals, Diagnostic, maintenance and test equipment, Wastes, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Milk and milk products, Raw materials for rubber and plastics, Laboratory medicine, Measurement of volume, mass, density, viscosity, Microbiology, Rubber, Pulps, Protection against fire, Prepackaged and prepared foods, Fuels, Electrical engineering in general, Electrical wires and cables, Alarm and warning systems, Test conditions and procedures in general, General methods of tests and analysis for food products.
IPC - Association Connecting Electronics Industries, Quantitative Quantitative Concentration
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Quantitative Quantitative Concentration
International Organization for Standardization (ISO), Quantitative Quantitative Concentration
- ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
- ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors
- ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
- ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
- ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
- ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
- ISO 21877:2019 Stationary source emissions— Determination of the mass concentration of ammonia — Manual method
- ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
- ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
- ISO 7935:1992 Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods
- ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
- ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
- ISO 17179:2016 Stationary source emissions - Determination of the mass concentration of ammonia in flue gas - Performance characteristics of automated measuring systems
- ISO 9096:2003/cor 1:2006 Stationary source emissions - Manual determination of mass concentration of particulate matter; Technical Corrigendum 1
- ISO 10313:1993 Ambient air; determination of the mass concentration of ozone; chemiluminescence method
- ISO 4221:1980 Air quality; Determination of mass concentration of sulphur dioxide in ambient air; Thorin spectrophotometric method
- ISO 10260:1992 Water quality; measurement of biochemical parameters; spectrometric determination of the chlorophyll-a concentration
- ISO 10849:2022 Stationary source emissions — Determination of the mass concentration of nitrogen oxides in flue gas — Performance characteristics of automated measuring systems
- ISO/FDIS 7935:2011 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
- ISO/PRF 7935:2023 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
- ISO/DIS 7935 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
- ISO 7996:1985 Ambient air; Determination of the mass concentration of nitrogen oxides; Chemiluminescence method
- ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
- ISO 8186:1989 Ambient air; determination of the mass concentration of carbon monoxide; gas chromatographic method
- ISO 1802:1985 Natural rubber latex concentrate — Determination of boric acid content
- ISO 2005:1992 Rubber latex, natural, concentrate; determination of sludge content
- ISO 1802:1992 Natural rubber latex concentrate; determination of boric acid content
- ISO 2005:2014 Rubber latex, natural, concentrate - Determination of sludge content
- ISO 2005:1985 Natural rubber latex concentrate — Determination of sludge content
- ISO 8299:1993 Determination of isotopic content and concentration of uranium and plutonium in nitric acid solution; mass spectrometric method
- ISO 19043:2023 Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method
- ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
- ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
- ISO 11564:1998/cor 1:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method; Technical Corrigendum 1
- ISO 19043:2015 Natural rubber latex concentrate - Determination of total phosphate content by spectrophotometric method
- ISO 10313:1993/CD Amd 1 Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method — Amendment 1
- ISO 10313:1993/DAmd 1:2011 Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method — Amendment 1
- ISO 9096:1992 Stationary source emissions; determination of concentration and mass flow rate of particulate material in gas-carrying ducts; manual gravimetric method
- ISO 7934:1989 Stationary source emissions; determination of the mass concentration of sulfur dioxide; hydrogen peroxide/barium perchlorate/thorin method
- ISO 16000-37:2019 Indoor air — Part 37: Measurement of PM2,5 mass concentration
- ISO 4119:1995 Pulps - Determination of stock concentration
KR-KS, Quantitative Quantitative Concentration
- KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
- KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
- KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
- KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
- KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
- KS I ISO 7935-2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
- KS I ISO 7996-2021 Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method
- KS I ISO 8186-2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
- KS I ISO 7934-2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Hydrogen peroxide/barium perchlorate/Thorin method
- KS M ISO 4119-2021 Pulps — Determination of stock concentration
- KS M ISO 4119-2016 Pulps－Determination of stock concentration
Korean Agency for Technology and Standards (KATS), Quantitative Quantitative Concentration
- KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
- KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
- KS I ISO 23210:2012 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
- KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
- KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
- KS I ISO 23210:2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
- KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
- KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
- KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
- KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
- KS E ISO 12739:2007 Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method
- KS I ISO 11564-2014(2019) Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
- KS I ISO 7935:2006 Stationary source emissions－Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
- KS A ISO 10980:2012 Validation of the strength of reference solutions used for measuring concentrations
- KS I ISO 11632:2004 Stationary source emissions-Determination of the massconcentration of sulfur dioxide(Ion chromatography method)
- KS E ISO 13291:2007 Zinc sulfide concentrates－Determination of zinc content－Solvent extraction and EDTA titrimetric method
- KS I ISO 11632:2014 Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
- KS I ISO 11632-2014(2019) Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
- KS R ISO 11614:2001 Reciprocating internal combustion compression-ignition engines- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- KS B ISO 10849:2009 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
- KS B ISO 7935:2009 Stationary source emissions－Determination of the mass concentration of sulfulr dioxide－Performance characteristics of automated measuring methods
- KS I ISO 7935:2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
- KS I ISO 10849-2008(2018) Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
- KS B ISO 10849-2003(2008) Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
- KS B ISO 7935-2003(2008) Stationary source emissions－Determination of the mass concentration of sulfulr dioxide－Performance characteristics of automated measuring methods
- KS I ISO 7935-2006(2016) Stationary source emissions－Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
- KS I ISO 11564:2004 Stationary source emissions-Determination of the mass concentrationof nitrogen oxides(Naphthylethylenediamine photometric method)
- KS I ISO 11564:2014 Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
- KS I ISO 10313:2005 Ambient air-Determination of the mass concentration of ozone(Chemiluminescence method)
- KS I ISO 10313-2005(2020) Ambient air－Determination of the mass concentration of ozone(Chemiluminescence method)
- KS E ISO 10258:2012 Copper sulfide concentrates－Determination of copper content－Titrimetric methods
- KS M ISO 2005:2009 Rubber latex, natural, concentrate-Determination of sludge content
- KS I ISO 4221:2006 Air quality－Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
- KS I ISO 4221-2006(2016) Air quality－Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
- KS I ISO 10260:2006 Water quality－Measurement of biochemical parameters－Spectrometric determination of the chlorophyll-a concentration
- KS I ISO 10260-2006(2021) Water quality－Measurement of biochemical parameters－Spectrometric determination of the chlorophyll-a concentration
- KS I ISO 7996:2006 Ambient air－Determination of the mass concentration of nitrogen oxides(Chemiluminescence method)
- KS I ISO 8186:2006 Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
- KS M 9107-1996 Water quality-Measurement of biochemeical parameters(Spectrometric determination of the chlorophyll-a concentration)
- KS I ISO 8186-2006(2016) Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
- KS I ISO 7996-2006(2016) Ambient air－Determination of the mass concentration of nitrogen oxides(Chemiluminescence method)
- KS I ISO 7996:2021 Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method
- KS I ISO 8186:2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
- KS E ISO 10469:2003 Copper sulfide concentrates－Determination of copper content－Electrogravimetric method
- KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
- KS M ISO 1802-2009(2019) Natural rubber latex concentrate－Determination of boric acid content
- KS M ISO 126-2009(2019) Natural rubber latex concentrate－Determination of dry rubber content
- KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
- KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
- KS I ISO 10849:2008 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
- KS I ISO 7934:2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Hydrogen peroxide/barium perchlorate/Thorin method
- KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions－Part 1：Test apparatus
- KS I ISO 6768-2014(2019) Ambient air — Determination of mass concentration of nitrogen dioxide(Modified Griess-Saltzman method)
- KS E ISO 13545:2011 Lead sulfide concentrates－Determination of lead content－EDTA titration method after acid digestion
- KS I ISO 7934:2006 Stationary source emissions－Determination of the mass concentration of sulfur dioxide(Hydrogen peroxide/barium perchlorate/thorin method)
- KS I ISO 21258-2012(2017) Stationary source emissions－Determination of the mass concentration of dinitrogen monoxide(N2O)－Reference method：Non-dispersive infrared method
- KS M ISO 4119:2006 Pulps-Determination of stock concentration
- KS M ISO 4119:2016 Pulps－Determination of stock concentration
- KS M ISO 4119:2021 Pulps — Determination of stock concentration
HU-MSZT, Quantitative Quantitative Concentration
AENOR, Quantitative Quantitative Concentration
- UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
- UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
- UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
- UNE-EN 13725:2004 Air quality - Determination of odour concentration by dynamic olfactometry
- UNE 77228:2002 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method.
- UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
- UNE 77226:1999 STATIONARY SOURCE EMISSIONS. DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE. ION CHROMATOGRAPHY METHOD.
- UNE 77222:1996 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF SULFUR DIOXIDE. PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING METHODS.
- UNE 77224:2000 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems.
- UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- UNE-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
- UNE 77232:1996 AMBIENT AIR. DETERMINATION OF THE MASS CONCENTRATION OF OZONE. CHEMILUMINESCENCE METHOD.
- UNE 77203:1993 AIR QUALITY. DETERMINATION OF MASS CONCENTRATION OF SULPHUR DIOXIDE IN AMBIENT AIR. THORIN SPECTROPHOTOMETRIC METHOD.
- UNE-EN 1948-3:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs
- UNE 77212:1993 AMBIENT AIR. DETERMINATION OF THE MASS CONCENTRATION OF NITROGEN OXIDES. CHEMILUMINESCENCE METHOD.
- UNE-EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
- UNE 77216/1M:2000 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Hydrogen peroxide/barium perchlorate/thorin method.
- UNE 77216:1995 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF SULFUR DIOXIDE. HYDROGEN PEROXIDE/BARIUM PERCHLORATE/THORIN METHOD.
- UNE-ISO 126:2013 Natural rubber latex concentrate — Determination of dry rubber content
Association Francaise de Normalisation, Quantitative Quantitative Concentration
- NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
- NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
- NF X43-308*NF EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method
- NF EN ISO 21877:2019 Émissions de sources fixes - Détermination de la concentration en masse de l'ammoniac - Méthode manuelle
- NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
- FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
- XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
- NF X44-052:2002 Émissions de sources fixes - Détermination de fortes concentrations massiques de poussières - Méthode gravimétrique manuelle
- XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
- NF X43-327:2003 Air quality - Determination of odour concentration by dynamic olfactometry.
- NF X43-372:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method.
- NF EN 14884:2022 Emissions de sources fixes - Détermination de la concentration en mercure total - Systèmes de mesurage automatisés
- NF EN 13284-1:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 1 : méthode gravimétrique manuelle
- XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
- NF EN 13211:2001 Qualité de l'air - Émissions de sources fixes - Méthode manuelle de détermination de la concentration en mercure total
- NF EN 17042:2018 Engrais - Dosage du bore dans des concentrations > à 10 % par titrage acidimétrique
- NF X43-324-3*NF EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3 : identification and quantification of PCDDs/PCDFs
- NF X43-333-1*NF EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : Manual gravimetric method
- NF EN 13284-2:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 2 : assurance qualité des systèmes de mesurage automatisés
- NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
- NF X43-336*NF EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
- NF X43-324:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 1 : Sampling.
- XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
- NF X43-339*NF ISO 11564:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method.
- NF X43-326:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 3 : identification and quantification.
- NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
- NF X43-333-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : automated measuring systems.
- NF X43-372*NF EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
- NF EN 14791:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes de soufre - Méthode de référence normalisée
- NF EN 1948-3:2006 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 3 : identification et quantification des PCDD/PCDF
- NF T42-019:2004 Rubber latex, natural, concentrate - Determination of sludge content.
- NF T42-019*NF ISO 2005:2015 Rubber latex, natural, concentrate - Determination of sludge content
- NF X43-333-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : manual gravimetric method.
- NF X43-373:2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method : chemiluminescence.
- NF X43-302:1986 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration de poussière par opacimétrie à lumière réfléchie.
- NF ISO 11564:2000 Émissions de sources fixes - Détermination de la concentration en masse des oxydes d'azote - Méthode photométrique à la naphtyléthylène diamine (NEDA)
- NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
- NF X43-325:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 2 : extraction and clean-up.
- FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
- NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
- NF X43-320*NF EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method.
- NF CEN/TS 17340:2020 Emissions de sources fixes - Détermination de la concentration massique en composés fluorés, exprimée en HF - Méthode de référence normalisée
- NF ISO 10980:1998 Vérification du titre des solutions de référence utilisées pour la mesure des concentrations
- NF T42-017*NF ISO 1802:2004 Natural rubber latex concentrate - Determination of boric acid content
- NF V04-295:1996 Milk. Concentrated lactoserum. Determination of solids content.
- XP U42-469*XP CEN/TS 17060:2018 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
- NF X43-304:2007 Stationary source emissions - Measurement of the concentration of fluorinated compounds, expressed in hydrofluoric acid (HF)- Manual method.
- NF X43-373*NF EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method : chemiluminescence
- NF EN 14792:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes d'azote - Méthode de référence normalisée : chimiluminescence
- FD X43-070-1:2018 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambiant air - Part 1 : general
- NF EN 12619:2013 Émissions de sources fixes - Détermination de la concentration massique en carbone organique total - Méthode du détecteur continu à ionisation de flamme
- NF EN 1911:2010 Émissions de sources fixes - Détermination de la concentration massique en chlorures gazeux, exprimée en HCI - Méthode de référence normalisée
- NF ISO 126:2005 Latex de caoutchouc naturel concentré - Détermination de la teneur en caoutchouc sec
- NF Q50-006*NF EN ISO 4119:1996 Pulps. Determination of stock concentration.
- NF EN ISO 4119:1996 Pâtes - Détermination de la concentration en pâte
German Institute for Standardization, Quantitative Quantitative Concentration
- DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
- DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
- DIN EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003
- DIN EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
- DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
- DIN EN 13211 Berichtigung 1:2005-06 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
- DIN EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method; English version of DIN EN 14791:2006-04
- DIN EN 13211:2001-06 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
- DIN EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs English version of DIN EN 1948-3:2006-06
- DIN EN 13284-1:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2017
- DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
- DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
- DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
- DIN EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems; German version EN 13284-2:2004
- DIN EN 14792:2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NO<(Index)x>) - Reference method: Chemiluminescence; English version of DIN EN 14792:2006-04
- DIN EN 14791:2017-05 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017
- DIN EN 1948-3:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs; German version EN 1948-3:2006
- DIN EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
- DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
- DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
- DIN EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2001
- DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
- DIN EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs English version of DIN EN 1948-1:2006-06
- DIN EN 13725 Berichtigung 1:2006 Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003, Corrigenda to DIN EN 13725:2003-07; German version EN 13725:2003/AC:2006
- DIN CEN/TS 17340:2021-01 Stationary source emissions - Determination of mass concentration of fluorinated compounds expressed as HF - Standard reference method; German version CEN/TS 17340:2020
- DIN EN ISO 4119:1996 Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996
- DIN EN 13211 Berichtigung 1:2005 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
- DIN CEN/TS 17337:2019-08*DIN SPEC 33981:2019-08 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy; German version CEN/TS 17337:2019
- DIN EN 14792:2017-05 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence; German version EN 14792:2017
- DIN EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
- DIN EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter; German version EN 12341:2014
- DIN 10318:1995 Determination of the density of buttermilk serum
RU-GOST R, Quantitative Quantitative Concentration
- GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
- GOST 19413-1989 Drinking water. Method for determination of selenium mass concentration
- GOST 23950-1988 Drinking water. Method for determination of strontium mass concentration
- GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
- GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
- GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
- GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
- GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
- GOST R 52690-2006 Foods. Voltammetric method of vitamin C mass concentration determination
- GOST 31660-2012 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
- GOST R 52689-2006 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
- GOST 28326.5-1989 Technical liquid ammonia. Determination of iron mass concentration by method of photocolorimetry
- GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
- GOST 30305.3-1995 Condensed preserved and dry milk products. Procedures of measurement of titrimetric acidity
- GOST 12787-1981 Methods for determination of spirit, actual extract and estimation of dry substances in the initial must
- GOST 34749-2021 Alcoholic and non-alcoholic products. Method for the determination of the mass concentration of quinine
- GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
- GOST R 52968-2008 Ethanol from food raw material. Method for determination of mass concentration of dry residue
- GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
- GOST 28326.3-1989 Technical liquid ammonia. Determination of oil mass concentration by method of infra-red spectrometry
- GOST 28857-1990 Natural rubber latex concentrate. Determination of sludge content
- GOST R ISO 10849-2006 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
- GOST R ISO 7935-2007 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
- GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
- GOST 31628-2012 Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic mass concentration determination
- GOST 31685-2012 Rectified ethanol from food raw material. Method for determination of mass concentration of dry residue
- GOST IEC 61034-1-2011 Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
- GOST 18294-2004 Drinking water. Method for determination of beryllium content
- GOST 15113.5-1977 Food concentrates. Methods for determination of acidity
- GOST 18294-1989 Drinking water. Method for determination of berillium mass concentration
British Standards Institution (BSI), Quantitative Quantitative Concentration
- BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
- BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
- BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
- BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
- BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
- BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
- BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
- BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
- BS EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
- BS EN 13725:2022 Air quality - Determination of odour concentration by dynamic olfactometry
- BS EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
- BS EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
- BS ISO 11564:1998 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
- BS EN 13284-1:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
- BS EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- BS ISO 17179:2016 Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems
- BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
- BS EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Identification and quantification of PCDDs/PCDFs
- BS PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
- BS PD CEN/TS 17638:2021 Stationary source emissions. Manual method for the determination of the mass concentration of formaldehyde. Reference method
- BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
- BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
- BS EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
- BS 6069-4.4:1993 Characterization of air quality. Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
- BS ISO 10849:2022 Stationary source emissions. Determination of the mass concentration of nitrogen oxides in flue gas. Performance characteristics of automated measuring systems
- BS EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
- BS EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling of PCDDs/PCDFs
- BS EN 1911:2010 Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
- PD CEN/TS 17340:2020 Stationary source emissions. Determination of mass concentration of fluorinated compounds expressed as HF. Standard reference method
- 22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
- BS 1747-2:1969 Methods for the measurement of air pollution - Determination of concentration of suspended matter
- BS 1747-12:1993 Methods for measurement of air pollution. Determination of the mass concentration of ozone in ambient air: chemiluminescence method
- BS EN 14791:2017 Tracked Changes. Stationary source emissions. Determination of mass concentration of sulphur oxides. Standard reference method
- 23/30442765 DC BS ISO 7935. Stationary source emissions. Determination of the mass concentration of sulfur dioxide in flue gases. Performance characteristics of automated measuring systems
- 21/30409886 DC BS ISO 10849. Stationary source emissions. Determination of the mass concentration of nitrogen oxides in flue gas. Performance characteristics of automated measuring systems
- BS EN 16966:2018 Workplace exposure. Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates. Metrics to be used such as number concentration, surface area concentration and mass concentration
- BS ISO 8672:2014 Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
- BS ISO 10260:1992 Water quality. Measurement of biochemical parameters. Spectrometric determination of the chlorophyll-a concentration
- BS EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
- BS ISO 19043:2015 Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
- 22/30446379 DC BS ISO 19043 Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
- BS EN ISO 4119:1995 Pulps. Determination of stock concentration
- BS EN ISO 4119:1996 Pulps. Determination of stock concentration
American Society for Testing and Materials (ASTM), Quantitative Quantitative Concentration
- ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
- ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
- ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
- ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
- ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
- ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
- ASTM D5919-96(2017) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
- ASTM D4599-03 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
- ASTM D4599-14 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
- ASTM D4599-03(2009)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
CU-NC, Quantitative Quantitative Concentration
- NC 44-12-15-1985 Ores. Copper Concentrates Silver and Gold Gravimetric Determination
- NC 44-12-14-1985 Ores. Copper Concentrates Volumetric Determinatlon of Aluminum Oxide
- NC 44-12-2-1984 Ores Copper Cencentrates. Gravimetrie Determination of Silionum Diexide
- NC 23-02-1968 Evaluation of sulphuric acid concentration by measurement of density
- NC 44-12-12-1985 Ores. Copper Conoentrates Photometric Deterraination of Arsenic
- NC 10-72-1988 Metallurgy. Determination of Compression Strength. Testing Method
ES-AENOR, Quantitative Quantitative Concentration
国家市场监督管理总局、中国国家标准化管理委员会, Quantitative Quantitative Concentration
- GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
- GB/T 39544-2020 Natural rubber latex concentrate—Determination of total phosphate content—Spectrophotometric method
- GB/T 8293-2019 Rubber latex, natural concentrate—Determination of sludge content
Danish Standards Foundation, Quantitative Quantitative Concentration
- DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
- DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
- DS/EN 13725/AC:2006 Air quality – Determination of odour concentration by dynamic olfactometry
- DS/EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
- DS/EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
- DS/ISO 11564+Cor.1:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
- DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
- DS/EN 13211/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- DS/EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
- DS/ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
- DS/ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
- DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
- DS/ISO 7935:1996 Stationary source emissions - Determination of the mass concentration of sulfur dioxide - Performance characteristics of automated measuring methods
- DS/EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs
- DS/EN 14792:2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
- DS/ISO 7934+Amd.1:1999 Stationary source emissions - Determination of the mass concentration of sulfur dioxide - Hydrogen peroxide/barium perchlorate/Thorin method
- DS/EN ISO 4119:1996 Pulps - Determination of stock concentration
Lithuanian Standards Office , Quantitative Quantitative Concentration
- LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
- LST EN 13725-2004 Air quality - Determination of odour concentration by dynamic olfactometry
- LST EN 13725-2004/AC-2006 Air quality - Determination of odour concentration by dynamic olfactometry
- LST EN 14791-2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
- LST EN 13211-2002 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- LST EN 13211-2002/AC-2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- LST EN 13284-1-2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
- LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
- LST ISO 7935:2001 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
- LST ISO 10849:2001 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
- LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- LST CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
- LST EN 1948-3-2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs
- LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
- LST EN 14792-2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
- LST ISO 7934+A1:2001 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Hydrogen peroxide/barium perchlorate/Thorin method
未注明发布机构, Quantitative Quantitative Concentration
- DIN EN 1948-3:1997 Emissions from stationary sources —— Determination of mass concentration of PCDD/PCDF I Part 3: Identification and quantification
- DIN EN 13211 Ber-1:2005 Air quality — Emissions from stationary sources — Manual method for determining total mercury concentration
- DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
- BS ISO 11632:1998(1999) Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method
- BS ISO 10260:1992(2014) Water quality — Measurement of biochemical parameters — Spectrometric determination of the chlorophyll - a concentration
- BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- DIN EN 14211:2005 Air quality — measurement method for determining the concentration of nitrogen dioxide and nitrogen monoxide using chemiluminescence
- BS ISO 126:2005(2008) Natural rubber latex concentrate — Determination of dry rubber content
- BS EN ISO 4119:1996(1999) Pulps — Determination ofstock concentration
ES-UNE, Quantitative Quantitative Concentration
- UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
- UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
- UNE-EN 13211:2001/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- UNE-EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
- UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)
- UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
Taiwan Provincial Standard of the People's Republic of China, Quantitative Quantitative Concentration
- CNS 5596-1980 Method of Test for Determination of Low Concentrations of Lead in Paints
Association of German Mechanical Engineers, Quantitative Quantitative Concentration
- VDI 3487 Blatt 1-1978 Gaseous emission measurement; measurement of carbon disulfide concentration; iodometric titration method
- VDI 3486 Blatt 2-1979 Measurement of gaseous emission; Measurement of the hydrogen sulfide concentration; lodometric titration method
- VDI 3486 Blatt 1-1979 Measurement of gaseous emissions; Measurement of the hydrogen sulfide concentration; potentiometric titration method
- VDI 2462 Blatt 1-1974 Gaseous emission measurement; determination of sulphur dioxide concentration; iodometric thiosulfate method
- VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
- VDI 4301 Blatt 1-1997 Indoor air pollution measurement - Determination of the concentration of nitrogen dioxide - Manual photometric method (Saltzman)
- VDI 2453 Blatt 3-1995 Gaseous air pollution measurement - Determination of the nitrogen monoxide and nitrogen dioxide concentration - Preparation of the calibration gas mixtures and determination of their concentration
- VDI 3488 Blatt 2-1980 Gaseous emission measurement; measurement of chlorine concentration; bromide iodide method
- VDI 2453 Blatt 1-1990 Gaseous air pollution measurement; determination of nitrogen dioxide concentration; photometric manual standard method (Saltzmann)
VN-TCVN, Quantitative Quantitative Concentration
- TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
- TCVN 7556-3-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDD/PCDF.Part 3: Identification and quantification
- TCVN 7172-2002 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Naphthylethylenediamine photometric method
- TCVN 6750-2000 Stationary source emissions.Determination of mass concentration of sulfur dioxide.Ion chromatography method
- TCVN 5978-1995 Air quality.Determination of mass concentration of sulphur dioxide in ambient air.Thorin spectrophotometry method
- TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
- TCVN 6662-2000 Water quality.Measurement of biochemical parameters.Spectrometry determination of the chlorophyll-a concentration
- TCVN 5976-1995 Stationary source emission.Determination of the mass concentration of sulfur dioxide.Performance characteristics of automated measuring methods
- TCVN 6501-1999 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Performance characteristics of automated measuring systems
- TCVN 5972-1995 Ambient air.Determination of the mass concentration of carbon monoxide.Gas chromatographic method
- TCVN 6138-1996 Ambient air.Determination of the mass concentration of nitrogen oxides.Chemiluminescence method
- TCVN 4858-2007 Natural rubber latex concentrate.Determination of dry rubber content
- TCVN 6320-2007 Rubber latex, natural, concentrade.Determination of sludge content
- TCVN 6322-2007 Natural rubber latex concentrate.Determination of boric acid content
- TCVN 6320-2016 Rubber latex,natural,concentrate - Determination of sludge content
SE-SIS, Quantitative Quantitative Concentration
- SIS SS 02 84 22-1990 Stationary source emissions — Determination of the mass concentration of hydrogen chloride — Potentiometric titration.
- SIS SS 02 84 23-1991 Air Quality — Stationary source emissions — Determination of the total mass concentration ofmercury — Flameless atomic absorption methods
- SIS SS 02 84 25-1991 Air quality — Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics and calibration of automated measuring systems
European Committee for Standardization (CEN), Quantitative Quantitative Concentration
- EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
- EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
- EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
- EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
- EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
- PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
- FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- EN 13284-1:2001 Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method
- EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
- PD CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
- EN ISO 9698:2015 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
- EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
- EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
- EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
- EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
- EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
- EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
- EN 13725:2003 Air quality - Determination of the odour concentration by dynamic olfactometry
- EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- CEN/TS 17340:2020 Stationary source emissions - Determination of mass concentration of fluorinated compounds expressed as HF - Standard reference method
- EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
- EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs
- EN 1948-3:1996 Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 3: Identification and Quantification
GOSTR, Quantitative Quantitative Concentration
- GOST 28326.4-1989 Technical liquid ammonia. Determination of oil mass concentration by spectrophotometry method
- GOST R 58797-2020 Drinking bottled water. Determination of mass concentration of dissolved oxygen. Measurement procedure
- GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method
- GOST 34128-2017 Juice products. Refractometric method for the determination of soluble solids mass concentration
- GOST ISO 2005-2017 Natural rubber latex concentrate. Determination of sludge content
IT-UNI, Quantitative Quantitative Concentration
- EC 1-2021 UNI EN 13725-2021 Air quality - Determination of odour concentration by dynamic olfactometry
- UNI CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Quantitative Quantitative Concentration
- ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)
Hebei Provincial Standard of the People's Republic of China, Quantitative Quantitative Concentration
- DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources
RO-ASRO, Quantitative Quantitative Concentration
TR-TSE, Quantitative Quantitative Concentration
- TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER
CEN - European Committee for Standardization, Quantitative Quantitative Concentration
- EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting
- EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration
- PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling
- PD CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy
CZ-CSN, Quantitative Quantitative Concentration
- CSN 34 7020-1-1995 Measurement of smoke density of electric cables burning under defined conditions
National Metrological Verification Regulations of the People's Republic of China, Quantitative Quantitative Concentration
- JJG(煤炭) 08-1996 Verification Regulation of Direct Reading Mine Dust Concentration Measuring Instrument
- JJG 846-2015 Dust Concentration Measuring Instruments
FI-SFS, Quantitative Quantitative Concentration
ZA-SANS, Quantitative Quantitative Concentration
- SANS 16590:2000 Water quality - Determination of mercury - Methods involving enrichment by amalgamation
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Quantitative Quantitative Concentration
- GB/T 34796-2017(英文版) Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
- GB/T 8293-2001 Natural rubber latex concentrate--Determination of sludge content
- GB/T 8294-2001 Natural rubber latex concentrate--Determination of boric acid content
- GB/T 8299-2001 Natural rubber latex concentrate--Determination of dry rubber content
- GB/T 8291-1987 Natural rubber latex concentrate--Determination of coagulum content
- GB/T 8293-2008 Natural rubber latex concentrate. Determination of sludge content
- GB/T 8294-2008 Natural rubber latex concentrate. Determination of boric acid content
- GB/T 8299-2008 Natural rubber latex concenttrate. Determination of dry rubber content
- GB 11848.9-1989 Determination of silicon in uranium ore concentrates Gravimetric determination of silicon
- GB/T 11848.9-1989 Determination of silicon in uranium concentrate by gravimetry
- GB/T 18856.2-2002 Test methods for quality of coal water mixture--Part 2: Determination of the solid load of coal water mixture
- GB/T 8298-2001 Natural rubber latex concentrate--Determination of total solids content
- GB/T 8298-2008 Natural rubber latex concenttrate. Determination of total solids content
- GB/T 5399-2004 Pulps-Determination of stock concentration
Shandong Provincial Standard of the People's Republic of China, Quantitative Quantitative Concentration
- DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province
AT-ON, Quantitative Quantitative Concentration
- ONORM M 5861-1-1993 Manual determination of particle concentrations in fluid gases - Gravimetrie method - General requirements
- ONORM M 5861-2-1994 Manual determination of particle concentrations in fluid gases - Gravimetrie method - Special requirements regarding measurement techniques
- ONORM M 6274-1985 Water analysis; determination ofthe mass concentration offilterable matter and its residue on ignition
- ONR CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (CEN/TS 17638:2021)
- ONORM M 6272-1985 Water analysis; determination of the mass concentration of settleable matter in water and waste water
Standard Association of Australia （SAA）, Quantitative Quantitative Concentration
- AS 2917.1:1994 Copper sulfide concentrates - Determination of copper content - Titrimetric methods
- AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
- AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
PT-IPQ, Quantitative Quantitative Concentration
National Metrological Technical Specifications of the People's Republic of China, Quantitative Quantitative Concentration
- JJF 1074-2018 Measurement Tables for Density-Concentration of Alcohal
- JJF 1074-2001 Measurement Tables for Density - Concentration of Alcohol
- JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments
TN-INNORPI, Quantitative Quantitative Concentration
Japanese Industrial Standards Committee (JISC), Quantitative Quantitative Concentration
- JIS B 8392-9:2008 Compressed air -- Part 9: Test methods for liquid water content by mass concentration
- JIS Z 7151:2000 Stationary source emissions -- Determination of concentration and mass flow rate of particulate material in gas-carrying ducts -- Manual gravimetric method
- JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration
- JIS K 0400-80-10:2000 Water quality -- Measurement of biochemical parameters -- Spectrometric determination of the chlorophyll-a concentration
- JIS P 8225:2003 Pulps -- Determination of stock concentration
BELST, Quantitative Quantitative Concentration
- STB 1931-2009 Wine production and wine raw material. Methods for determination a mass concentration of titrating acids
- STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests
Professional Standard - Medicine, Quantitative Quantitative Concentration
- YY/T 1455-2016 Guidelines for values assignment of catalytic activity concentrations of enzymes using reference measurement procedures and evaluation of uncertainty
YU-JUS, Quantitative Quantitative Concentration
- JUS H.B8.151-1985 Heavy chemlcals. Carbamlde (urea) for Industrlal use. Determlnatlon ad bfuret content Photometrlc method
Professional Standard - Agriculture, Quantitative Quantitative Concentration
- GB 8294-1987 Determination of boric acid content in natural concentrated latex
- GB 8293-1987 Determination of residue content of natural concentrated latex
- GB 8299-1987 Determination of dry rubber content of natural concentrated latex
- GB 8291-1987 Determination of clot content of natural concentrated latex
- GB 8298-1987 Determination of total solids content of natural concentrated latex
Military Standard of the People's Republic of China-General Armament Department, Quantitative Quantitative Concentration
- GJB 9254-2017 Determination method of mass concentration of neodymium element in neodymium phosphate glass ICP-AES method
American National Standards Institute （ANSI), Quantitative Quantitative Concentration
- BS ISO 19043:2023 Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method (British Standard)
Professional Standard - Nuclear Industry, Quantitative Quantitative Concentration
- EJ/T 20216-2018 Environmental radon concentration double filter membrane measuring instrument
Professional Standard - Urban Construction, Quantitative Quantitative Concentration
- CJ/T 3028.2-1994 The measures of ozone concentration, output and specific energy consumption for ozone generator
PL-PKN, Quantitative Quantitative Concentration
Indonesia Standards, Quantitative Quantitative Concentration