ZH

RU

ES

Quantification of peptide concentration

Quantification of peptide concentration, Total:498 items.

In the international standard classification, Quantification of peptide concentration involves: Air quality, Fertilizers, Nuclear energy engineering, Water quality, Paints and varnishes, Analytical chemistry, Metalliferous minerals, Particle size analysis. Sieving, Beverages, Inorganic chemicals, Protection against fire, Laboratory medicine, Pulps, Food products in general, Diagnostic, maintenance and test equipment, Wood-based panels, Environmental protection, Animal feeding stuffs, Milk and milk products, Products of the chemical industry, Test conditions and procedures in general, General methods of tests and analysis for food products, Prepackaged and prepared foods, Coals, Wastes, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Raw materials for rubber and plastics, Spices and condiments. Food additives, Fruits. Vegetables, Shipbuilding and marine structures in general, Welding, brazing and soldering, Rubber, Measurement of volume, mass, density, viscosity, Internal combustion engines for road vehicles, Road vehicles in general, Medical sciences and health care facilities in general, Medical equipment, Machine tools, Alarm and warning systems, Explosion protection, Protection against dangerous goods, Beekeeping, Fuels, Electrical engineering in general, Electrical wires and cables.


IPC - Association Connecting Electronics Industries, Quantification of peptide concentration

International Organization for Standardization (ISO), Quantification of peptide concentration

  • ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
  • ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors
  • ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
  • ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
  • ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
  • ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
  • ISO 21877:2019 Stationary source emissions— Determination of the mass concentration of ammonia — Manual method
  • ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
  • ISO/TS 27106:2009 | IDF/RM 217:2009 Cheese — Determination of nisin A content by LC-MS and LC-MS-MS
  • ISO 4119:1995 Pulps - Determination of stock concentration
  • ISO 10313:1993 Ambient air; determination of the mass concentration of ozone; chemiluminescence method
  • ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
  • ISO 125:2003 Natural rubber latex concentrate - Determination of alkalinity
  • ISO 125:1990 Natural rubber latex concentrate; determination of alkalinity
  • ISO 125:2011 Natural rubber latex concentrate - Determination of alkalinity
  • ISO 23196:2022 Water quality — Calculation of biological equivalence (BEQ) concentrations
  • ISO 10260:1992 Water quality; measurement of biochemical parameters; spectrometric determination of the chlorophyll-a concentration
  • ISO 9096:2003/cor 1:2006 Stationary source emissions - Manual determination of mass concentration of particulate matter; Technical Corrigendum 1
  • ISO 7935:1992 Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods
  • ISO 4221:1980 Air quality; Determination of mass concentration of sulphur dioxide in ambient air; Thorin spectrophotometric method
  • ISO 7996:1985 Ambient air; Determination of the mass concentration of nitrogen oxides; Chemiluminescence method
  • ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
  • ISO 8186:1989 Ambient air; determination of the mass concentration of carbon monoxide; gas chromatographic method
  • ISO 16000-37:2019 Indoor air — Part 37: Measurement of PM2,5 mass concentration
  • ISO 2990:1974 Nitric acid for industrial use; Evaluation of the nitric acid concentration by measurement of density
  • ISO 4119:1978 Pulps; Determination of stock concentration (Rapid method)
  • ISO 17179:2016 Stationary source emissions - Determination of the mass concentration of ammonia in flue gas - Performance characteristics of automated measuring systems
  • ISO 8299:1993 Determination of isotopic content and concentration of uranium and plutonium in nitric acid solution; mass spectrometric method
  • ISO 19043:2023 Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method
  • ISO 905:1976 Hydrochloric acid for industrial use; Evaluation of hydrochloric acid concentration by measurement of density
  • ISO 911:1977 Sulphuric acid for industrial use; Evaluation of sulphuric acid concentration by measurement of density
  • ISO/CD TS 6818 Traditional Chinese medicine — Test method for moxa floss quality — concentration of waste particles
  • ISO 11564:1998/cor 1:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method; Technical Corrigendum 1

KR-KS, Quantification of peptide concentration

  • KS I ISO 12141-2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS I ISO 23210-2017 Stationary source emissions-Determination of PM10/PM2.5 mass concentration in flue gas-Measurement at low concentrations by use of impactors
  • KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
  • KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • KS M ISO 4119-2021 Pulps — Determination of stock concentration
  • KS M ISO 4119-2016 Pulps-Determination of stock concentration
  • KS I ISO 7996-2021 Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method
  • KS I ISO 8186-2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
  • KS I ISO 7935-2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods

Shandong Provincial Standard of the People's Republic of China, Quantification of peptide concentration

  • DB37/T 2121-2012 Determination of Polypeptide Content in Urea
  • DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province

Korean Agency for Technology and Standards (KATS), Quantification of peptide concentration

  • KS I ISO 12141:2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS A ISO 10980:2012 Validation of the strength of reference solutions used for measuring concentrations
  • KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
  • KS I ISO 23210:2012 Stationary source emissions-Determination of PM10/PM2.5 mass concentration in flue gas-Measurement at low concentrations by use of impactors
  • KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
  • KS I ISO 23210:2017 Stationary source emissions-Determination of PM10/PM2.5 mass concentration in flue gas-Measurement at low concentrations by use of impactors
  • KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
  • KS I ISO 12141:2007 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 9096:2009 Stationary source emissions-Manual determination of mass concentration of particulate matter
  • KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • KS R ISO 11614:2001 Reciprocating internal combustion compression-ignition engines- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
  • KS I ISO 11564-2014(2019) Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
  • KS E ISO 12739:2007 Zinc sulfide concentrates-Determination of zinc content-Ion-exchange and EDTA titrimetric method
  • KS M ISO 4119:2006 Pulps-Determination of stock concentration
  • KS M ISO 4119:2016 Pulps-Determination of stock concentration
  • KS M ISO 4119:2021 Pulps — Determination of stock concentration
  • KS I ISO 11564:2004 Stationary source emissions-Determination of the mass concentrationof nitrogen oxides(Naphthylethylenediamine photometric method)
  • KS I ISO 11564:2014 Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
  • KS I ISO 10313:2005 Ambient air-Determination of the mass concentration of ozone(Chemiluminescence method)
  • KS I ISO 10313-2005(2020) Ambient air-Determination of the mass concentration of ozone(Chemiluminescence method)
  • KS I ISO 11632:2004 Stationary source emissions-Determination of the massconcentration of sulfur dioxide(Ion chromatography method)
  • KS E ISO 13291:2007 Zinc sulfide concentrates-Determination of zinc content-Solvent extraction and EDTA titrimetric method
  • KS I ISO 11632:2014 Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
  • KS I ISO 11632-2014(2019) Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
  • KS M ISO 125:2010 Natural rubber latex concentrate-Determination of alkalinity
  • KS M ISO 125:2015 Natural rubber latex concentrate-Determination of alkalinity
  • KS M 2105-1995 Methods of measuring dust concentration in flue gas
  • KS D 0061-1995 Methods for measurement of dust concentration in welding environment
  • KS B 0546-2016 Methods of mesurement for gas Concentration in welding environment
  • KS M 2105-2005(2010) Methods of measuring dust concentration in flue gas
  • KS I ISO 10260:2006 Water quality-Measurement of biochemical parameters-Spectrometric determination of the chlorophyll-a concentration
  • KS I ISO 10260-2006(2021) Water quality-Measurement of biochemical parameters-Spectrometric determination of the chlorophyll-a concentration
  • KS I ISO 7935:2006 Stationary source emissions-Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
  • KS A ISO 10980-2012(2017) Validation of the strength of reference solutions used for measuring concentrations
  • KS A ISO 10980-2012(2022) Validation of the strength of reference solutions used for measuring concentrations
  • KS A 0079-1982 General rule of measuring methods for airborne dust concentration in environmental atmosphere
  • KS I ISO 4221:2006 Air quality-Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
  • KS I ISO 4221-2006(2016) Air quality-Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
  • KS I ISO 7996:2006 Ambient air-Determination of the mass concentration of nitrogen oxides(Chemiluminescence method)
  • KS I ISO 8186:2006 Ambient air-Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
  • KS M 9107-1996 Water quality-Measurement of biochemeical parameters(Spectrometric determination of the chlorophyll-a concentration)
  • KS I ISO 8186-2006(2016) Ambient air-Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
  • KS I ISO 7996-2006(2016) Ambient air-Determination of the mass concentration of nitrogen oxides(Chemiluminescence method)
  • KS I ISO 7996:2021 Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method
  • KS I ISO 8186:2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
  • KS B ISO 10849:2009 Stationary source emissions-Determination of the mass concentration of nitrogen oxides-Performance characteristics of automated measuring systems
  • KS B ISO 7935:2009 Stationary source emissions-Determination of the mass concentration of sulfulr dioxide-Performance characteristics of automated measuring methods
  • KS I ISO 7935:2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
  • KS I ISO 10849-2008(2018) Stationary source emissions-Determination of the mass concentration of nitrogen oxides-Performance characteristics of automated measuring systems
  • KS B ISO 10849-2003(2008) Stationary source emissions-Determination of the mass concentration of nitrogen oxides-Performance characteristics of automated measuring systems
  • KS B ISO 7935-2003(2008) Stationary source emissions-Determination of the mass concentration of sulfulr dioxide-Performance characteristics of automated measuring methods
  • KS I ISO 7935-2006(2016) Stationary source emissions-Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
  • KS R 1033-2009 Diesel engine smoke measurement method
  • KS A 4048-1995 Measurementing methods of concentration of airborne radioactive particle
  • KS R 5036-1986(2011) Reflection type smokemeters for measuring carbon concentration of exhaust smoke for diesel automobiles
  • KS D 0061-2005 Methods for measurement of dust concentration in welding environment
  • KS B 0546-1995 Methods of mesurement for gas Concentration in welding environment
  • KS B 0546-2021 Methods of measurement for gas concentration in welding environment
  • KS M ISO 2005:2009 Rubber latex, natural, concentrate-Determination of sludge content
  • KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions-Part 1:Test apparatus

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Quantification of peptide concentration

HU-MSZT, Quantification of peptide concentration

AENOR, Quantification of peptide concentration

  • UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
  • UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
  • UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
  • UNE-EN 13725:2004 Air quality - Determination of odour concentration by dynamic olfactometry
  • UNE 77228:2002 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method.
  • UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
  • UNE 77232:1996 AMBIENT AIR. DETERMINATION OF THE MASS CONCENTRATION OF OZONE. CHEMILUMINESCENCE METHOD.
  • UNE 77226:1999 STATIONARY SOURCE EMISSIONS. DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE. ION CHROMATOGRAPHY METHOD.
  • UNE 77203:1993 AIR QUALITY. DETERMINATION OF MASS CONCENTRATION OF SULPHUR DIOXIDE IN AMBIENT AIR. THORIN SPECTROPHOTOMETRIC METHOD.
  • UNE-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
  • UNE 77212:1993 AMBIENT AIR. DETERMINATION OF THE MASS CONCENTRATION OF NITROGEN OXIDES. CHEMILUMINESCENCE METHOD.
  • UNE 77222:1996 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF SULFUR DIOXIDE. PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING METHODS.
  • UNE 77224:2000 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems.
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • UNE-ISO 125:2012 Natural rubber latex concentrate. Determination of alkalinity

German Institute for Standardization, Quantification of peptide concentration

  • DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
  • DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
  • DIN EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003
  • DIN EN ISO 4119:1996 Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996
  • DIN EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
  • DIN EN 13211:2001-06 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
  • DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
  • DIN EN 13211 Berichtigung 1:2005-06 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
  • DIN EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method; English version of DIN EN 14791:2006-04
  • DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
  • DIN 10318:1995 Determination of the density of buttermilk serum
  • DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
  • DIN EN 16966:2019-01 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration; German version EN 16966:2018
  • DIN 58932-4:2003 Haematology - Determination of the concentration of blood corpuscles in blood - Part 4: Reference procedure for the determination of the concentration of leucocytes
  • DIN EN 14792:2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NO<(Index)x>) - Reference method: Chemiluminescence; English version of DIN EN 14792:2006-04
  • DIN EN 14791:2017-05 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017
  • DIN 58932-3:1994 Haematology; determination of the concentration of blood corpuscles in blood; determination of the concentration of erythrocytes; reference method
  • DIN EN 13284-1:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2017
  • DIN EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
  • DIN 58932-3:2017-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
  • DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
  • DIN EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs English version of DIN EN 1948-3:2006-06
  • DIN 58932-3:2023-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English / Note: Date of issue 2023-06-02*Intended as replacement for...
  • DIN 58932-4:2003-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 4: Reference procedure for the determination of the concentration of leucocytes
  • DIN 58932-5:2007-10 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN 58904:1998 Haemostaseology - Determination of protein C activity - Reference measurement procedure with a chromogenic peptide substrate
  • DIN ISO 125:2014-11 Natural rubber latex concentrate - Determination of alkalinity (ISO 125:2011)
  • DIN EN ISO 4119:1996-05 Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996
  • DIN ISO 125:2008 Natural rubber latex concentrate - Determination of alkalinity (ISO 125:2003);English version of DIN ISO 125:2008-06
  • DIN EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
  • DIN EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems; German version EN 13284-2:2004
  • DIN 58932-5:2007 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
  • DIN EN ISO 13161:2016-01 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011); German version EN ISO 13161:2015 / Note: To be replaced by DIN EN ISO 13161 (2019-11).
  • DIN EN 17042:2018-08 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration; German version EN 17042:2018
  • DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
  • DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
  • DIN EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2001

Association Francaise de Normalisation, Quantification of peptide concentration

  • NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
  • NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
  • NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
  • NF X43-308*NF EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method
  • NF EN ISO 21877:2019 Émissions de sources fixes - Détermination de la concentration en masse de l'ammoniac - Méthode manuelle
  • FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
  • NF ISO 10980:1998 Vérification du titre des solutions de référence utilisées pour la mesure des concentrations
  • NF X43-327:2003 Air quality - Determination of odour concentration by dynamic olfactometry.
  • NF X43-372:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method.
  • NF EN 14884:2022 Emissions de sources fixes - Détermination de la concentration en mercure total - Systèmes de mesurage automatisés
  • NF EN 17042:2018 Engrais - Dosage du bore dans des concentrations > à 10 % par titrage acidimétrique
  • NF X44-052:2002 Émissions de sources fixes - Détermination de fortes concentrations massiques de poussières - Méthode gravimétrique manuelle
  • XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
  • XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
  • NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
  • NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
  • NF EN 13211:2001 Qualité de l'air - Émissions de sources fixes - Méthode manuelle de détermination de la concentration en mercure total
  • XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
  • NF Q50-006*NF EN ISO 4119:1996 Pulps. Determination of stock concentration.
  • NF EN ISO 4119:1996 Pâtes - Détermination de la concentration en pâte
  • NF EN 13284-1:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 1 : méthode gravimétrique manuelle
  • NF X43-339*NF ISO 11564:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method.
  • NF X43-336*NF EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
  • NF X43-324:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 1 : Sampling.
  • XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • NF T42-005:2011 Natural rubber latex concentrate - Determination of alkalinity.
  • NF V05-001:1959 Food products. Vinegar. Determination of acetic acid concentration.
  • NF X43-302:1986 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration de poussière par opacimétrie à lumière réfléchie.
  • NF X43-372*NF EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
  • NF EN 14791:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes de soufre - Méthode de référence normalisée
  • NF X43-333-1*NF EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : Manual gravimetric method
  • NF EN 16966:2018 Exposition sur les lieux de travail - Mesurage de l'exposition par inhalation de nano-objets et de leurs agrégats et agglomérats - Métriques à utiliser telles que concentration en nombre, concentration en surface et concentration en masse
  • NF ISO 11564:2000 Émissions de sources fixes - Détermination de la concentration en masse des oxydes d'azote - Méthode photométrique à la naphtyléthylène diamine (NEDA)
  • NF U42-467*NF EN 17042:2018 Fertilizers - Determination of boron in concentrations > or 10 % using acidimetric titration
  • NF ISO 125:2020 Latex concentré de caoutchouc naturel - Détermination de l'alcalinité
  • NF X43-324-3*NF EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3 : identification and quantification of PCDDs/PCDFs
  • NF X43-373:2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method : chemiluminescence.
  • NF X43-326:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 3 : identification and quantification.
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
  • NF EN 13284-2:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 2 : assurance qualité des systèmes de mesurage automatisés
  • NF T42-005*NF ISO 125:2020 Natural rubber latex concentrate - Determination of alkalinity
  • NF X43-333-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : automated measuring systems.
  • NF X43-325:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 2 : extraction and clean-up.
  • XP U42-469*XP CEN/TS 17060:2018 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
  • NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
  • NF S66-270:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours.
  • NF V08-754*NF EN ISO 18465:2017 Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS
  • NF X43-333-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : manual gravimetric method.
  • NF T42-019:2004 Rubber latex, natural, concentrate - Determination of sludge content.
  • NF T42-019*NF ISO 2005:2015 Rubber latex, natural, concentrate - Determination of sludge content
  • NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
  • NF X43-320*NF EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method.
  • NF CEN/TS 17340:2020 Emissions de sources fixes - Détermination de la concentration massique en composés fluorés, exprimée en HF - Méthode de référence normalisée

Fujian Provincial Standard of the People's Republic of China, Quantification of peptide concentration

RU-GOST R, Quantification of peptide concentration

  • GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
  • GOST 19413-1989 Drinking water. Method for determination of selenium mass concentration
  • GOST 23950-1988 Drinking water. Method for determination of strontium mass concentration
  • GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
  • GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
  • GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
  • GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
  • GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
  • GOST R 52690-2006 Foods. Voltammetric method of vitamin C mass concentration determination
  • GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
  • GOST 13496.10-1974 Conbined forege. Method for the determination of smut fungi spors content
  • GOST 31660-2012 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
  • GOST R 52689-2006 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
  • GOST 28326.5-1989 Technical liquid ammonia. Determination of iron mass concentration by method of photocolorimetry
  • GOST 18294-2004 Drinking water. Method for determination of beryllium content
  • GOST 15113.5-1977 Food concentrates. Methods for determination of acidity
  • GOST 18294-1989 Drinking water. Method for determination of berillium mass concentration
  • GOST 30305.3-1995 Condensed preserved and dry milk products. Procedures of measurement of titrimetric acidity
  • GOST 12787-1981 Methods for determination of spirit, actual extract and estimation of dry substances in the initial must
  • GOST 27198-1987 Fresh grapes. Methods for determination of mass concentration of sugars
  • GOST 34749-2021 Alcoholic and non-alcoholic products. Method for the determination of the mass concentration of quinine
  • GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
  • GOST 4386-1989 Drinking water. Methods for determination of fluorides mass concentration
  • GOST R 52968-2008 Ethanol from food raw material. Method for determination of mass concentration of dry residue
  • GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
  • GOST 28326.3-1989 Technical liquid ammonia. Determination of oil mass concentration by method of infra-red spectrometry
  • GOST 30305.4-1995 Dry dairy products. The procedure of measurement of solubility index
  • GOST 27709-1988 Canned condensed milk. The viscosity estimation method
  • GOST 31628-2012 Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic mass concentration determination
  • GOST 31685-2012 Rectified ethanol from food raw material. Method for determination of mass concentration of dry residue

British Standards Institution (BSI), Quantification of peptide concentration

  • BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
  • BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
  • BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
  • BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
  • BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
  • BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
  • BS EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
  • BS EN 13725:2022 Air quality - Determination of odour concentration by dynamic olfactometry
  • BS EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
  • BS EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
  • BS ISO 11564:1998 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
  • DD ISO/TS 27106:2009 Cheese. Determination of nisin A content by LC-MS and LC-MS-MS
  • BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
  • BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
  • BS EN ISO 4119:1995 Pulps. Determination of stock concentration
  • BS EN ISO 4119:1996 Pulps. Determination of stock concentration
  • BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
  • BS EN 16966:2018 Workplace exposure. Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates. Metrics to be used such as number concentration, surface area concentration and mass concentration
  • BS EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • BS PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • BS PD CEN/TS 17638:2021 Stationary source emissions. Manual method for the determination of the mass concentration of formaldehyde. Reference method
  • BS EN 13284-1:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
  • BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
  • BS ISO 17179:2016 Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems
  • BS EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • BS ISO 125:2011 Natural rubber latex concentrate. Determination of alkalinity
  • BS ISO 125:2020 Tracked Changes. Natural rubber latex concentrate. Determination of alkalinity
  • BS EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Identification and quantification of PCDDs/PCDFs
  • BS EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
  • BS EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling of PCDDs/PCDFs
  • BS EN 1911:2010 Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
  • BS 1747-2:1969 Methods for the measurement of air pollution - Determination of concentration of suspended matter
  • BS EN 17042:2018 Fertilizers. Determination of boron in concentrations > 10 % using acidimetric titration
  • BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
  • PD CEN/TS 17340:2020 Stationary source emissions. Determination of mass concentration of fluorinated compounds expressed as HF. Standard reference method
  • BS ISO 10260:1992 Water quality. Measurement of biochemical parameters. Spectrometric determination of the chlorophyll-a concentration
  • BS EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air

American Society for Testing and Materials (ASTM), Quantification of peptide concentration

  • ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
  • ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
  • ASTM UOP350-82 Trace Concentrations of Lead in Gasoline or Petroleum Naphthas
  • ASTM D2088-73 Method for Determination of Low Concentrations of Lead in Paint
  • ASTM D4599-03 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4599-14 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4599-03(2009)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

CU-NC, Quantification of peptide concentration

  • NC 44-12-15-1985 Ores. Copper Concentrates Silver and Gold Gravimetric Determination
  • NC 44-12-14-1985 Ores. Copper Concentrates Volumetric Determinatlon of Aluminum Oxide
  • NC 44-12-2-1984 Ores Copper Cencentrates. Gravimetrie Determination of Silionum Diexide
  • NC 23-02-1968 Evaluation of sulphuric acid concentration by measurement of density
  • NC 44-12-12-1985 Ores. Copper Conoentrates Photometric Deterraination of Arsenic
  • NC 10-72-1988 Metallurgy. Determination of Compression Strength. Testing Method
  • NC 44-12-10-1985 Ores. Copper concentrates Polarographic Determination of lead

Danish Standards Foundation, Quantification of peptide concentration

  • DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
  • DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
  • DS/EN 13725/AC:2006 Air quality – Determination of odour concentration by dynamic olfactometry
  • DS/EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
  • DS/ISO 11564+Cor.1:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
  • DS/EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
  • DS/EN ISO 4119:1996 Pulps - Determination of stock concentration
  • DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
  • DS/EN 13211/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • DS/ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
  • DS/EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • DS/ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
  • DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
  • DS/ISO 7935:1996 Stationary source emissions - Determination of the mass concentration of sulfur dioxide - Performance characteristics of automated measuring methods
  • DS/ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
  • DS/EN 14792:2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence

Lithuanian Standards Office , Quantification of peptide concentration

  • LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
  • LST EN 13725-2004 Air quality - Determination of odour concentration by dynamic olfactometry
  • LST EN 13725-2004/AC-2006 Air quality - Determination of odour concentration by dynamic olfactometry
  • LST EN 14791-2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
  • LST EN 13211-2002 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • LST EN 13211-2002/AC-2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
  • LST CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
  • LST EN 13284-1-2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
  • LST ISO 7935:2001 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
  • LST ISO 10849:2001 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • LST EN ISO 4119:2001 Pulps - Determination of stock concentration (ISO 4119:1995)
  • LST EN 14792-2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence

ES-AENOR, Quantification of peptide concentration

Taiwan Provincial Standard of the People's Republic of China, Quantification of peptide concentration

  • CNS 5596-1980 Method of Test for Determination of Low Concentrations of Lead in Paints
  • CNS 7250-1989 Method for Determining Average Concentration of Weld Fume in Welding Environment

National Metrological Verification Regulations of the People's Republic of China, Quantification of peptide concentration

Standard Association of Australia (SAA), Quantification of peptide concentration

  • AS 2917.1:1994 Copper sulfide concentrates - Determination of copper content - Titrimetric methods
  • AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
  • AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations

国家市场监督管理总局、中国国家标准化管理委员会, Quantification of peptide concentration

  • GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
  • GB/T 39544-2020 Natural rubber latex concentrate—Determination of total phosphate content—Spectrophotometric method
  • GB/T 40486-2021 Determination of melittin content in bee venom powder—High performance liquid chromatography

TN-INNORPI, Quantification of peptide concentration

National Metrological Technical Specifications of the People's Republic of China, Quantification of peptide concentration

  • JJF 1074-2018 Measurement Tables for Density-Concentration of Alcohal
  • JJF 1074-2001 Measurement Tables for Density - Concentration of Alcohol
  • JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments
  • JJF 1716-2018 Program of Pattern Evaluation of Dust Concentration Measuring Instruments

GOSTR, Quantification of peptide concentration

  • GOST 28326.4-1989 Technical liquid ammonia. Determination of oil mass concentration by spectrophotometry method
  • GOST R 58797-2020 Drinking bottled water. Determination of mass concentration of dissolved oxygen. Measurement procedure
  • GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method
  • GOST 34128-2017 Juice products. Refractometric method for the determination of soluble solids mass concentration

ES-UNE, Quantification of peptide concentration

  • UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
  • UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
  • UNE-EN 13211:2001/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)
  • UNE-EN 16966:2022 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
  • UNE-EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • UNE-EN 17042:2019 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
  • UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems

European Committee for Standardization (CEN), Quantification of peptide concentration

  • EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
  • EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
  • EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
  • EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
  • CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • EN ISO 9698:2015 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
  • EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
  • PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
  • PD CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
  • EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN ISO 4119:1996 Pulps - Determination of Stock Concentration (ISO 4119 : 1995)
  • EN 13284-1:2001 Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method
  • EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
  • EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
  • EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence

国家食品药品监督管理局, Quantification of peptide concentration

VN-TCVN, Quantification of peptide concentration

  • TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
  • TCVN 7172-2002 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Naphthylethylenediamine photometric method
  • TCVN 6750-2000 Stationary source emissions.Determination of mass concentration of sulfur dioxide.Ion chromatography method
  • TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
  • TCVN 6662-2000 Water quality.Measurement of biochemical parameters.Spectrometry determination of the chlorophyll-a concentration
  • TCVN 7556-3-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDD/PCDF.Part 3: Identification and quantification
  • TCVN 4857-2007 Natural rubber latex concentrate.Determination of alkalinity
  • TCVN 5978-1995 Air quality.Determination of mass concentration of sulphur dioxide in ambient air.Thorin spectrophotometry method
  • TCVN 5972-1995 Ambient air.Determination of the mass concentration of carbon monoxide.Gas chromatographic method
  • TCVN 6138-1996 Ambient air.Determination of the mass concentration of nitrogen oxides.Chemiluminescence method
  • TCVN 4857-2015 Natural rubber latex concentrate -Determination of alkalinity
  • TCVN 5976-1995 Stationary source emission.Determination of the mass concentration of sulfur dioxide.Performance characteristics of automated measuring methods
  • TCVN 6501-1999 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Performance characteristics of automated measuring systems

IT-UNI, Quantification of peptide concentration

  • EC 1-2021 UNI EN 13725-2021 Air quality - Determination of odour concentration by dynamic olfactometry
  • UNI CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Quantification of peptide concentration

  • ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

Association of German Mechanical Engineers, Quantification of peptide concentration

  • VDI 3486 Blatt 2-1979 Measurement of gaseous emission; Measurement of the hydrogen sulfide concentration; lodometric titration method
  • VDI 3487 Blatt 1-1978 Gaseous emission measurement; measurement of carbon disulfide concentration; iodometric titration method
  • VDI 3486 Blatt 1-1979 Measurement of gaseous emissions; Measurement of the hydrogen sulfide concentration; potentiometric titration method
  • VDI 4301 Blatt 1-1997 Indoor air pollution measurement - Determination of the concentration of nitrogen dioxide - Manual photometric method (Saltzman)
  • VDI 3488 Blatt 2-1980 Gaseous emission measurement; measurement of chlorine concentration; bromide iodide method
  • VDI 2453 Blatt 3-1995 Gaseous air pollution measurement - Determination of the nitrogen monoxide and nitrogen dioxide concentration - Preparation of the calibration gas mixtures and determination of their concentration
  • VDI 2462 Blatt 1-1974 Gaseous emission measurement; determination of sulphur dioxide concentration; iodometric thiosulfate method
  • VDI 2453 Blatt 1-1990 Gaseous air pollution measurement; determination of nitrogen dioxide concentration; photometric manual standard method (Saltzmann)
  • VDI 2452 Blatt 1-1978 Air pollution measurement; measurement of total fluoride ion concentration; impinger method

YU-JUS, Quantification of peptide concentration

  • JUS H.B8.415-1985 Phthalic anhydride for industrial use. Detennination of iron content. 1,10 Phenanthroline photometric method
  • JUS H.N8.162-1988 Pulps. Determination ofstock concentration. Rapid method
  • JUS ISO 1802:1994 Natural rubber latex concentrate - Determination of boric acid content
  • JUS H.B8.151-1985 Heavy chemlcals. Carbamlde (urea) for Industrlal use. Determlnatlon ad bfuret content Photometrlc method

SE-SIS, Quantification of peptide concentration

  • SIS SS 02 84 22-1990 Stationary source emissions — Determination of the mass concentration of hydrogen chloride — Potentiometric titration.
  • SIS SS 02 84 23-1991 Air Quality — Stationary source emissions — Determination of the total mass concentration ofmercury — Flameless atomic absorption methods

Professional Standard - Medicine, Quantification of peptide concentration

  • YY/T 1451-2016 B-type natriuretic peptide and N-terminal pro-B-type natriuretic peptide test reagent (quantitative labelling immunoassay)
  • YY/T 1455-2016 Guidelines for values assignment of catalytic activity concentrations of enzymes using reference measurement procedures and evaluation of uncertainty

CEN - European Committee for Standardization, Quantification of peptide concentration

  • EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting
  • EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration
  • PREN 17042-2016 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
  • PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling

未注明发布机构, Quantification of peptide concentration

  • DIN EN 1948-3:1997 Emissions from stationary sources —— Determination of mass concentration of PCDD/PCDF I Part 3: Identification and quantification
  • BS EN ISO 4119:1996(1999) Pulps — Determination ofstock concentration
  • DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
  • DIN EN 13211 Ber-1:2005 Air quality — Emissions from stationary sources — Manual method for determining total mercury concentration
  • BS ISO 11632:1998(1999) Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method
  • BS ISO 10260:1992(2014) Water quality — Measurement of biochemical parameters — Spectrometric determination of the chlorophyll - a concentration

RO-ASRO, Quantification of peptide concentration

  • STAS SR ISO 10313:1995 Ambient air - Detennination of the mass concentration of ozon -Chemiluminescence method
  • STAS SR ISO 10260:1996 Water quality - Measurement of biochemical parameters -Spectrometric determination of the chlorophylle - a concentration
  • STAS 8613/6-1980 CONCENTRATED FOODSTUFF Determination of nitrogen content
  • STAS SR 13355-3-1999 Beer. Analysis methods. Determination of alcoholic concentration
  • STAS 8613/4-1980 CONCENTRATED FOOD STUFF Determination of acidity of aqueous extract
  • STAS 9464-1981 Organic dyestufis OPTICAL BLEACHING AGENT Determination of concentration by the spectrophotometry method
  • STAS 8170/1-1980 ORGANIC DYES Determination of delivery concentration by spectroiphotometric method
  • STAS 8613/1-1980 CONCENTRATED FOODSTUFF Determination of moisture content
  • STAS 8613/2-1970 CONCENTRATED FOODSTUFF Determination of ash content
  • STAS 8613/5-1980 CONCENTRATED FOODSTUFF Determination of fat content

TR-TSE, Quantification of peptide concentration

  • TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER
  • TS 2465-1976 Nitric Acid For Industrial Use Evaluation of The Nitric Acid Concentration By Measurement of Density

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Quantification of peptide concentration

  • GB/T 34796-2017(英文版) Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
  • GB/T 5399-2004 Pulps-Determination of stock concentration
  • GB/T 6921-1986 Determination of the concentration of airborne particulate matters
  • GB/T 5399-1985 Pulp--Determination of stock concentration--Rapid method
  • GB/T 8300-2001 Natural rubber latex concentrate--Determination of alkalinity
  • GB/T 8300-2008 Natural rubber latex concenttrate. Determination of alkalinity
  • GB/T 8300-2016 Natural rubber latex concentrate.Determination of alkalinity
  • GB/T 8301-2001 Natural rubber latex concentrate--Determination of mechanical stability
  • GB/T 8301-2008 Natural rubber latex concenttrate. Determination of mechanical stability
  • GB/T 16147-1995 Scintillation flask method for measuring radon concentration in the air
  • GB/T 18856.2-2002 Test methods for quality of coal water mixture--Part 2: Determination of the solid load of coal water mixture

Hebei Provincial Standard of the People's Republic of China, Quantification of peptide concentration

  • DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

CZ-CSN, Quantification of peptide concentration

PL-PKN, Quantification of peptide concentration

Indonesia Standards, Quantification of peptide concentration

Japanese Industrial Standards Committee (JISC), Quantification of peptide concentration

  • JIS P 8225:2003 Pulps -- Determination of stock concentration
  • JIS Z 8808:2013 Methods of measuring dust concentration in flue gas
  • JIS Z 8808:1995 Methods of measuring dust concentration in flue gas
  • JIS B 8392-9:2008 Compressed air -- Part 9: Test methods for liquid water content by mass concentration
  • JIS A 1306:2014 Measuring method of smoke density using light extinction method
  • JIS Z 8852:2013 Methods of continuous measurement for dust concentration in flue gas
  • JIS Z 3952:2005 Methods of measurement for gas concentration in welding environment

国家煤炭工业局, Quantification of peptide concentration

  • MT/T 792-1998 Determination method of coal water slurry concentration

PT-IPQ, Quantification of peptide concentration

国家煤矿安全监察局, Quantification of peptide concentration

  • MT 79-1984 Methods for determination of dust concentration and dispersion

Canadian General Standards Board (CGSB), Quantification of peptide concentration

  • CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

Professional Standard - Agriculture, Quantification of peptide concentration

  • 109药典 四部-2020 0800 Limit Inspection Method 0872 Determination of Acetic Acid in Synthetic Peptides
  • 128药典 四部-2015 0800 Limit Inspection Method 0872 Determination of Acetic Acid in Synthetic Peptides
  • GB 8300-1987 Determination of Alkalinity of Natural Concentrated Latex
  • GB 8301-1987 Determination of mechanical stability of natural concentrated latex

Professional Standard - Nuclear Industry, Quantification of peptide concentration

  • EJ/T 20216-2018 Environmental radon concentration double filter membrane measuring instrument

AT-ON, Quantification of peptide concentration

  • ONORM M 5861-1-1993 Manual determination of particle concentrations in fluid gases - Gravimetrie method - General requirements
  • ONORM M 9405-1993 Determination of asbestos concentration in air Dosage des concentrations d'amiante dans l'air
  • ONORM M 6274-1985 Water analysis; determination ofthe mass concentration offilterable matter and its residue on ignition
  • ONORM M 5861-2-1994 Manual determination of particle concentrations in fluid gases - Gravimetrie method - Special requirements regarding measurement techniques
  • ONORM M 6272-1985 Water analysis; determination of the mass concentration of settleable matter in water and waste water

FI-SFS, Quantification of peptide concentration

Professional Standard - Traffic, Quantification of peptide concentration

U.S. Military Regulations and Norms, Quantification of peptide concentration

BE-NBN, Quantification of peptide concentration

American Society of Mechanical Engineers (ASME), Quantification of peptide concentration

BELST, Quantification of peptide concentration

  • STB 1931-2009 Wine production and wine raw material. Methods for determination a mass concentration of titrating acids

Professional Standard - Urban Construction, Quantification of peptide concentration

  • CJ/T 3028.2-1994 The measures of ozone concentration, output and specific energy consumption for ozone generator

Military Standard of the People's Republic of China-General Armament Department, Quantification of peptide concentration

  • GJB 9254-2017 Determination method of mass concentration of neodymium element in neodymium phosphate glass ICP-AES method

Group Standards of the People's Republic of China, Quantification of peptide concentration

  • T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument

Professional Standard - Machinery, Quantification of peptide concentration

  • JB/T 9879-1999 Measuring method of oil mist concentration for metal cutting machine tools

海关总署, Quantification of peptide concentration

  • SN/T 5162-2019 Determination of limited oxygen concentrations for flammable gases and vapors

ZA-SANS, Quantification of peptide concentration

  • SANS 16590:2000 Water quality - Determination of mercury - Methods involving enrichment by amalgamation




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved