ZH
RU
ES

Soil Hardness Tester

Soil Hardness Tester, Total:497 items.

In the international standard classification, Soil Hardness Tester involves: Soil quality. Pedology, Components for aerospace construction, Analytical chemistry, Road engineering, Geology. Meteorology. Hydrology, Pharmaceutics, Earthworks. Excavations. Foundation construction. Underground works, Farming and forestry, Metrology and measurement in general, Construction materials, Radiation measurements, Non-destructive testing, Hydraulic construction, Civil engineering in general, Construction equipment, Paper and board, Non-ferrous metals, Measurement of volume, mass, density, viscosity, Non-metalliferous minerals, Plastics, Vibrations, shock and vibration measurements, Testing of metals, Reinforced plastics, Agricultural machines, implements and equipment, Protection against dangerous goods, Laboratory medicine, Wastes, Rubber, Vocabularies, Products of the textile industry, Mining equipment, Road vehicles in general, Protective equipment.

HU-MSZT, Soil Hardness Tester

International Organization for Standardization (ISO), Soil Hardness Tester

ISO/CD 18386 Soil quality — Screening method for soil temperature — Measurement by IR thermometer
ISO 4974:2023 Soil quality — Guidance on soil temperature measurement
ISO 10573:1995 Soil-quality - Determination of water content in the unsaturated zone - Neutron depth probe method
ISO 11277:2020 Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation
ISO 17924:2018 Soil quality - Assessment of human exposure from ingestion of soil and soil material - Procedure for the estimation of the human bioaccessibility/bioavailability of metals in soil
ISO 11504:2017 Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons
ISO 11504:2012 Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons
ISO 11272:1998 Soil quality - Determination of dry bulk density
ISO 11508:2017 Soil quality - Determination of particle density
ISO 11272:2017 Soil quality - Determination of dry bulk density
ISO/TS 17892-2:2004 Reconnaissance et essais géotechniques - Essais de sol au laboratoire - Partie 2: Détermination de la masse volumique d'un sol fin (Première édition)
ISO 11277:1998 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 11277:2020/DAmd 1 Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation — Amendment 1
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO/TS 20432:2022 Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
ISO 1920-4:2020 Testing of concrete — Part 4: Strength of hardened concrete
ISO/TS 17892-2:2004/Cor 1:2006 Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil — Technical Corrigendum 1
ISO/TR 20432:2007 Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
ISO 6275:1982 Concrete, hardened; Determination of density
ISO 17402:2008 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials

Standard Association of Australia （SAA）, Soil Hardness Tester

AS 1289.6.3.3:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test
AS 1289.6.3.2:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9kg dynamic cone penetrometer test
AS 1289.6.7.3:1999 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method using a flexible wall permeameter
AS 1289.6.3.2:1997(R2013)
AS 1289.6.2.1:2001(R2013)
AS 1289.5.8.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture?Density gauge - Direct transmission mode
AS 1289.6.2.1:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the shear strength of a soil
AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
AS 1289.6.1.3:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method
AS 1289.6.9.1:2000 Methods of testing soils for engineering purposes - Soil strength and consolidation test Determination of stiffness of soil
AS 1289.5.3.5:1997(R2013)
AS 1289.6.7.2:2001/Amdt 1:2003
AS 1289.6.7.1:2001(R2013)
AS 1289.6.6.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the one-dimensional consolidation properties of a soil - Standard method
AS 1289.5.8.4:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks
AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
AS 1289.6.2.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box
AS 1289.6.3.3:1997/Amdt No. 1:1999
AS 1289.6.1.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen
AS 1289.6.3.3:1997(R2013)
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
AS 1289.6.1.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen
AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
AS 1289.6.5.1:1999(R2013)
AS 1289.6.7.1:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil
AS 1289.3.6.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
AS 1289.3.6.1:2009
AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
AS 1289.6.7.2:2001(R2013)
AS 1289.6.2.2:2020 Methods of testing soils for engineering purposes, Method 6.2.2: Soil strength and consolidation tests — Determination of shear strength of a soil — Direct shear test using a shear box
AS 1289.6.3.1:2004 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT)
AS 1289.6.1.3:1998(R2013)
AS 1289.6.6.1:2020 Methods of testing soils for engineering purposes, Method 6.6.1: Soil strength and consolidation tests — Determination of the one-dimensional consolidation properties of a soil — Standard method
AS 1289.5.3.1:2004 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
AS 1289.5.8.5:1998(R2013)
AS 1289.6.4.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore
AS 1289.5.8.1:1995 Methods of testing soils for engineering purposes Method 5.8.1: Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS 1289.5.8.4:2009
AS 1289.5.8.4:2009/Amdt 1:2012
AS 1289.3.6.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method)
AS 1289.6.1.1:2014 Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests — Determination of the California Bearing Ratio of a soil — Standard laboratory method for a remoulded specimen
AS 1289.6.7.3:2016 Methods of testing soils for engineering purposes, Method 6.7.3: Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter
AS 1289.3.6.3:2020 Methods of testing soils for engineering purposes, Part 3.6.3: Soil classification tests — Determination of the particle size distribution of a soil — Standard method of fine analysis using an hydrometer
AS 1289.6.7.2:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil - Falling head method for a remoulded specimen
AS 1289.6.1.2:1998(R2013)
AS 4479.4:1999 Analysis of soils - Determination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry

U.S. Military Regulations and Norms, Soil Hardness Tester

ARMY MIL-PRF-3627 G-2006 PENETROMETERS, SOIL: DIAL INDICATING AND SPRING INDICATING

IN-BIS, Soil Hardness Tester

Professional Standard - Machinery, Soil Hardness Tester

JB/T 7439.9-1994 Terminology relating to laboratory instruments - Soil instrument
JB/T 20104-2007 Hardness tester

Professional Standard - Traffic, Soil Hardness Tester

JT/T 920-2014 Soil liquid & plastic limit gauge

AT-ON, Soil Hardness Tester

ONORM L 1068-1988 Physical investigations ofsoil; determination ofsoil density
ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor
ONORM L 1083-1999 Chemical analyses of soils - Determination of acidity (pH value)
OENORM EN ISO 17155:2020 Soil quality - Determination of abundance and activity of soil microflora using respiration curves (ISO 17155:2012)
ONORM B 4412-1974 Earthwork and foundation engineering; analysis of soil specimen; grain size distribution

British Standards Institution (BSI), Soil Hardness Tester

BS ISO 4974:2023 Soil quality. Guidance on soil temperature measurement
22/30436148 DC BS ISO 4974. Soil quality. Guidance on soil temperature measurement
BS EN 12390-7:2019 Testing hardened concrete - Density of hardened concrete
BS ISO 1920-4:2020 Testing of concrete - Strength of hardened concrete
BS EN 16907-4:2018 Earthworks - Soil treatment with lime and/or hydraulic binders
BS EN 12390-7:2009 Testing hardened concrete Part 7: Density of hardened concrete
BS EN 12390-7:2019(2020) Testing hardened concrete Part 7: Density of hardened concrete
BS ISO 22190:2020 Soil quality. Use of extracts for the assessment of bioavailability of trace elements in soils
BS EN 12390-7:2000 Testing hardened concrete - Density of hardened concrete
BS EN ISO 17155:2020 Soil quality. Determination of abundance and activity of soil microflora using respiration curves
BS EN ISO 17402:2011 Soil quality. Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials
BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
19/30377042 DC BS ISO 22190. Soil quality. Use of extracts for the assessment of bioavailability of trace elements in soils
BS 7755-5.1:1996 Soil quality - Physical methods - Determination of pore water pressure - Tensiometer method
BS EN 16502:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
BS EN ISO 11508:2017 Tracked Changes. Soil quality. Determination of particle density

中国气象局, Soil Hardness Tester

QX/T 567-2020 Automatic soil moisture observer

YU-JUS, Soil Hardness Tester

JUS U.B1.012-1979 Testing of soils. Determination of soil moisture content
JUS U.B1.038-1997 Testing ofsoil - Determination ofthe relation moisture content - densitv ofsoil
JUS U.B1.014-1988 Testing ofsoils. Deteriftjjnation ofdensiv/
JUS U.B1.018-1980 Testing ofsoils. Determination ofparticle si?e distribution
JUS U.B1.011-1998 Testing ofsoil - Determination moisture content of soil in place by nuclear methods (Shallow depth)
JUS U.M1.070-1998 Concrete, hardened - Determination of pull-out strength

American Society for Testing and Materials (ASTM), Soil Hardness Tester

ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D6758-02 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method
ASTM D6758-08 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM D3385-03 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM D421-85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D4944-11 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D425-88(1994) Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D425-88(2001) Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D3441-05 Standard Test Method for Mechanical Cone Penetration Tests of Soil
ASTM D425-17 Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2922-04 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D2922-05 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D421-85(2002) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D8167/D8167M-23 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D6938-08 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D6938-17ae1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6938-23 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils
ASTM D422-63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils
ASTM D2922-04e1 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D2922-01 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D2922-96e1 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D421-85(1998) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D7830/D7830M-13 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D7380/D7380M-21 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 2.3-kg [5-lbm] Dynamic Cone Penetrometer
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D6758-18e1 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM C1074-98 Standard Practice for Estimating Concrete Strength by the Maturity Method
ASTM D204-02(2010) Standard Test Methods for Sewing Threads
ASTM D2049-69e1 Test Method for Relative Density of Cohesionless Soils
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D7380-15 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM D3385-09 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM D6938-06e1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6938-17 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6938-17a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D425-88(2008) Standard Test Method for Centrifuge Moisture Equivalent of Soils

工业和信息化部, Soil Hardness Tester

JB/T 20104-2022 Tablet Hardness Tester

PT-IPQ, Soil Hardness Tester

NZ-SNZ, Soil Hardness Tester

NZS 4402.6.3.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.1: Standard Method Using Laboratory Apparatus
NZS 4402.6.3.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.2: Alternative Method Using Autographic Apparatus
NZS 4402.6.5.2:1988 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration Resistance of a Soil Test 6.5.2: Hand Method Using a Dynamic Cone Penetrometer
NZS 4402.5.1.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.4: Immersion in Water Method
NZS 4402.5.1.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.5: Water Displacement Method
NZS 4402.5.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Sensity of Soil Test 5.1.3: Sampling Tube Method for the Determination of the In Situ Density
NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density
NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
NZS 4402.2.7.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils
NZS 4402.4.2.2:1988 Methods of Testing soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.2: Maximum Dry Density
NZS 4402.4.2.3:1988 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.3: Relative Density
NZS 4402.4.2.1:1988 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.1: Minimum Dry Density
NZS 4402.2.7.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils
NZS 4402.6.5.1:1988 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration Resistance of Soil Test 6.5.1: Standard Penetration Test (SPT)
NZS 4402.2.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests Test 2.5: Determination of the Cone Penetration Limit
NZS 4402.6.5.3:1988 Methods of Testing Soils for Civil Engineering Purposes Part 6.5: Soil Strength Tests - Determination of the Penetration Resistance of a Soil Test 6.5.3: Cone Penetration Resistance Using a Cone or a Friction Cone

RU-GOST R, Soil Hardness Tester

GOST 26262-2014 Soils. Soils field methods for determining depth of thawing
GOST 25932-1983 Portable radioisotope soil and concrete moisture and density gauges. General specifications
GOST 25358-1982 Soils. Field method of determining temperature
GOST 25358-2012 Soils. Field method of determining temperature
GOST R 53582-2009 Soils. Method of determination of thawing soil shear resistance
GOST 26484-1985 Soils. Method for determination of exchangeable acidity
GOST 28622-1990 Soils. Laboratory method for determining of froth-heave degree
GOST 22733-2002 Soils. Laboratory method for determination of maximum density
GOST 24847-1981 Soils. Determination methods of seasonable depth of freezing
GOST 20276-1999 Soils. Field methods for determining the strength and strain characteristics
GOST 26262-1984 Soils field methods for determining depth of thawing
GOST 27753.4-1988 Greenhouse grounds. Method for determination of total salts content
GOST 28622-2012 Soils. Laboratory method for determination of frost-heave degree
GOST 23061-1990 Soils. Methods for radioisotope measurement of density and humidity
GOST 23061-2012 Soils. Methods for radioisotope measurement of density and humidity
GOST 22733-2016 Soils. Laboratory method for determining of maximum density
GOST 26212-1991 Soils. Determination of hydrolytic acidity by Kappen method modified by CINAO
GOST 20276-2012 Soils. Field methods for determining the strength and strain characteristics
GOST 26212-2021 Soils. Determination of hydrolytic acidity by Kappen method modified by CINAO

Xinjiang Provincial Standard of the People's Republic of China, Soil Hardness Tester

DB65/T 602.10-2001 The determinanation of soil particle siensite in soil
DB65/T 4368-2021 Soil Petroleum Determination Fluorophotometry

Professional Standard - Agriculture, Soil Hardness Tester

NY/T 1121.24-2012 Soil testing.Part 24:Determination of total nitrogen in soil.Automatic kjeldahl apparatus method
NY/T 1121.25-2012 Soil testing.Part 25:Method for determination of available phosphorus by continuous flow analyzer
GB 7839-1987 Determination of forest soil temperature
GB 7848-1987 Determination of Forest Soil Firmness
NY/T 1121.23-2010 Soil testing.Part 23:Method for determination of soil particle density
NY/T 4375-2023 Technical requirements for integrated automatic soil moisture monitor

Group Standards of the People's Republic of China, Soil Hardness Tester

T/ZJNJ 0018-2023 Soil nutrient test procedure
T/CHES 58-2021 Time Domain Reflectometry Soil Moisture Monitor
T/SHZSAQS 00119-2022 Leeb Hardness Tester Operating Technical Regulations

GOSTR, Soil Hardness Tester

GOST R 58270-2018 Soils. Method of wedging dilatometer test
GOST 25358-2020 Soils. Field method of determining the temperature
GOST R 58594-2019 Soils. Method for determination of exchangeable acidity
GOST 12248.11-2020 Soils. Determination of strength characteristics of thawing soils using the shear method
GOST 12248.7-2020 Soils. Determination of the characteristics of strength and deformability of frozen soils by the method of ball stamping
GOST 12248.8-2020 Soils. Determination of the characteristics of the strength of frozen soils by shearing on the freezing surface
GOST 12248.1-2020 Soils. Determination of strength parameters by shear strength testing
GOST 24847-2017 Soils. Determination methods of seasonable depth of freezing

IT-UNI, Soil Hardness Tester

CNR-UNI 10014-1964
CNR-UNI 10008-1963
UNI EN ISO 17155:2020 Soil quality - Determination of abundance and activity of soil microflora using respiration curves

German Institute for Standardization, Soil Hardness Tester

DIN 19662:2012-07 Soil quality - Field tests - Determination of soil penetration resistance by means of a hand held penetrometer
DIN 19682-5:2007-11 Soil quality - Field tests - Part 5: Determination of soil moisture
DIN 18126:2022-10 Soil, investigation and testing - Determination of density of non cohesive soils for maximum and minimum compactness
DIN 18125-2:1999 Soil investigation and testing - Determination of density of soil - Part 2: Field tests
DIN EN ISO 11276:2014 Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276:1995), German version EN ISO 11276:2014
DIN ISO 11276:2001 Soil quality - Determination of pore water pressure - Tensiometer methods (ISO 11276:1995)
DIN 18125-2:2011 Soil investigation and testing - Determination of density of soil - Part 2: Field tests
DIN 18125-2:2020 Soil, investigation and testing - Determination of density of soil - Part 2: Field tests
DIN 18125-2:2020-11 Soil, investigation and testing - Determination of density of soil - Part 2: Field tests
DIN 18125-1:1997 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN EN ISO 11272:2014 Soil quality - Determination of dry bulk density (ISO 11272:1998); German version EN ISO 11272:2014
DIN EN ISO 11508:2014 Soil quality - Determination of particle density (ISO 11508:1998); German version EN ISO 11508:2014
DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
DIN EN ISO 17402:2011-09 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials (ISO 17402:2008); German version EN ISO 17402:2011
DIN EN 12390-7:2021-01 Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2019 + AC:2020
DIN EN 16907-4:2019 Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders
DIN EN 16907-4:2015 Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders; German and English version prEN 16907-4:2015
DIN ISO/TS 17892-2:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004); German version CEN ISO/TS 17892-2:2004
DIN 18125-1:2010 Soil, investigation and testing - Determination of density of soil - Part 1: Laboratory tests
DIN EN ISO 17155:2021-02 Soil quality - Determination of abundance and activity of soil microflora using respiration curves (ISO 17155:2012); German version EN ISO 17155:2020
DIN 18132:2012 Soil, testing procedures and testing equipment - Determination of water absorption
DIN 18132:1995 Soil, testing procedures and testing equipment - Determination of water absorption
DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
DIN 19682-5:2007 Soil quality - Field tests - Part 5: Determination of soil moisture
DIN 19738:2017 Soil quality - Bioaccessibility of organic and inorganic pollutants from contaminated soil material
DIN 18123:2011 Soil, investigation and testing - Determination of grain-size distribution
DIN 19682-2:2007 Soil quality - Field tests - Part 2: Determination of soil texture
DIN 19682-2:2014 Soil quality - Field tests - Part 2: Determination of soil texture
DIN EN 16907-4:2019-04 Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders; German version EN 16907-4:2018
DIN ISO 11508:2002 Soil quality - Determination of particle density (ISO 11508:1998)
DIN EN 16502:2014-11 Test method for the determination of the degree of soil acidity according to Baumann-Gully; German version EN 16502:2014

National Metrological Verification Regulations of the People's Republic of China, Soil Hardness Tester

JJG(交通) 069-2006 Verification Regulation of Liquid & Plastic Limit Gauge
JJG(烟草) 06-2006 Cigarette/filter rod hardness tester test regulation
JJG(烟草) 04-1998 Verification Regulations for Cigarette Hardness Tester by Total Pressing Method

American Society of Civil Engineers (ASCE), Soil Hardness Tester

ASCE GSP 194-2009 SOILS AND ROCK INSTRUMENTATION, BEHAVIOR, AND MODELING

RO-ASRO, Soil Hardness Tester

STAS 1914-1970 FOUNDATION SOILS Determination of density and of specific gravity of soils
STAS 1913/3-1976 FOUNDATION GROUND Determination of the soil density
STAS 7184/5-1978 ?OILS Determination of total porosity and of airy porosity
STAS 8321-1969
STAS 8942/1-1989 Foundation soil EARTHES COMPRESSIBILITY DETERMINATION BY EDOMETER TESTING
STAS 2414-1972 TESTS OF CON'CRETE Determination of density, compaction and porosity of hardened concrete
STAS 5432/1-1985 Land amelioration works EXCEEDING PROBABILIT1ES AND INSURANCE DEGREES

Professional Standard - Forestry, Soil Hardness Tester

LY/T 1224-1999 Determination of soil particle density in forest soil
LY/T 1249-1999 Calculation of soil alkalinity
LY/T 1219-1999 Determination of forest soil temperature
LY/T 1223-1999 Determination of forest soil hardness
LY/T 1220-1999 Determination of intensity of forest soil respiration
LY/T 1247-1999 Calculation of base-saturation percentage in forest foil
LY/T 1240-1999 Determination of exchangeable acidity in forest soil
LY/T 1241-1999 Determination of hydrolytic total acidity in forest soil

Lithuanian Standards Office , Soil Hardness Tester

LST 1360.6-1995 Soils for road construction. Testing methods. Determination of density of soil
LST EN 12390-7-2009 Testing hardened concrete - Part 7: Density of hardened concrete
LST EN 12390-7/AC-2021 Testing hardened concrete - Part 7: Density of hardened concrete

Korean Agency for Technology and Standards (KATS), Soil Hardness Tester

KS F 2308-2006 Test method for density of soil particles
KS F 2308-1986 Test method for density of soil particles
KS F 2593-2009 Standard test method for bulk density of soil
KS F 2302-2017 Test method for particle size distribution of soils
KS I ISO 11272:2005 Soil quality－Determination of dry bluk density
KS I ISO 11508:2009 Soil quality－Determination of particle density
KS F 2308-2016 Test method for density of soil particles
KS F 2302-2022 Test method for particle size distribution of soils
KS F 2308-2022 Test method for density of soil particles
KS F 2308-2016(2021) Test method for density of soil particles
KS I ISO 17402:2020 Soil quality — Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials
KS I ISO 11277:2005 Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)
KS F 2341-2022 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS I ISO 17155-2009(2014) Soil quality－Determination of abundance and activity of soil microflora using respiration curves
KS F 2311-2016 Test method for soil density by the sand replacement method
KS F 2311-1986 Test method for soil density by the sand replacement method
KS F 2314-2013 Standard test method for unconfined compression test of soils
KS F 2593-2014 Standard test method for moisture density of soil
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS F 2311-2001 Test method for soil density by the sand replacement method
KS K ISO TR 20432:2009 Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
KS K ISO TR 20432:2015 Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
KS I ISO 17402:2009 Soil quality-Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials
KS F 2593-2019 Standard test method for moisture density of soil

Association Francaise de Normalisation, Soil Hardness Tester

NF X31-560:2007 Qualité des sols - Cartographie des sols appliquée à toutes les échelles - Acquisition et gestion informatique de données pédologiques en vue de leur utilisation en cartographie des sols
NF X31-507:1993 Qualité des sols - Évaluation de la masse volumique apparente d'un sol - Méthode par transmission d'un rayonnement gamma.
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
NF EN ISO 17402:2011 Qualité du sol - Lignes directrices pour la sélection et l'application des méthodes d'évaluation de la biodisponibilité des contaminants dans le sol et les matériaux du sol
NF P18-430-7:2012 Testing hardened concrete - Part 7 : density of hardened concrete.
NF P94-059:2000 Sols : reconnaissance et essais - Détermination des masses volumiques minimale et maximale des sols non cohérents
NF X31-554:1998 Soil quality. Determination of particle density.
NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
NF X31-559*NF ISO 11277:2020 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
NF ISO 17924:2019 Qualité du sol - Évaluation de l'exposition humaine par ingestion de sol et de matériaux du sol - Mode opératoire pour l'estimation de la bioaccessibilité/biodisponibilité pour l'homme de métaux dans le sol
NF X31-510:1993 Qualité des sols - Détermination de la masse volumique des mottes - Méthode par enrobage à la paraffine.
NF P11-303-4*NF EN 16907-4:2018 Earthworks - Part 4 : soil treatment with lime and/or hydraulic binders
NF EN ISO 19496-1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN 60966-2-6:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN ISO 6789-2:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN ISO 16890-3:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN ISO 19496-2:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN ISO 16890-1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN 62053-11/A1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN 62052-31:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN ISO 11272:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN ISO 6789-1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN 60794-2-22:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
NF EN ISO 17155:2020 Qualité du sol - Détermination de l'abondance et de l'activité de la microflore du sol à l'aide de courbes de respiration
FD X31-611-1-1997 SOIL QUALITY. POLLUTION DETECTION AND CHARACTERIZATION METHODS. GENERAL GUIDE FOR SOIL GAS ANALYSES ON SITE USED IN LAND SCREENING.
NF P94-100:2015 Soils : investigation and testing - Lime and/or hydraulic binder treated materials - Test for determining the treatment ability of a soil
NF P94-100:2022 Sols - Reconnaissance et essais - Matériaux traités à la chaux et/ou aux liants hydrauliques - Essais d'évaluation de l'aptitude d'un sol au traitement
NF EN 16907-4:2018 Terrassement - Partie 4 : traitement des sols à la chaux et/ou aux liants hydrauliques
XP P94-120:1997 Sols : reconnaissance et essais - Essai de cisaillement au phicomètre
XP P94-041:1995 Sols : reconnaissance et essais - Identification granulométrique - Méthode de tamisage par voie humide.
NF X31-622:2008 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials.
NF P18-465:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
NF EN 16502:2014 Méthode d'essai pour la détermination du degré d'acidité des sols selon Baumann-Gully
NF EN ISO 13196:2015 Qualité du sol - Analyse rapide d'une sélection d'éléments dans les sols à l'aide d'un spectromètre de fluorescence X à dispersion d'énergie portable ou portatif

European Committee for Standardization (CEN), Soil Hardness Tester

EN ISO 11276:2014 Soil quality - Determination of pore water pressure - Tensiometer method
EN 12390-7:2009 Testing hardened concrete - Part 7: Density of hardened concrete
EN ISO 11504:2017 Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons
EN ISO 11508:2017 Soil quality - Determination of particle density
EN ISO 17402:2011 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials (ISO 17402:2008)
EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor
EN ISO 11508:2014 Soil quality - Determination of particle density
CR 12793:1997 Measurement of the carbonation depth of hardened concrete

Indonesia Standards, Soil Hardness Tester

SNI 1742-2008 Testing methods for light solidity of soils
SNI 3423-2008 Testing methods for analysis of grain soils size
SNI 13-4182-1996 Measurement code for degree of salinity of soils
SNI 1976-2008
SNI 7752-2012 Tata cara pengukuran laju infiltrasi tanah di lapangan menggunakan infiltrometer cincin ganda

Taiwan Provincial Standard of the People's Republic of China, Soil Hardness Tester

CNS 5087-1986 Method of Test for Liquid Limit of Soils
CNS 12239-1988 Method of Test for One-Dimensional Consolidarion Properties of Soils
CNS 12384-1988 Method of Test for Unconfined Compressive Strength of Cohesive Soil
CNS 14733-2005 Method of test for density of soil in-place by the sand-cone method

US-FCR, Soil Hardness Tester

FCR COE WRP-CP-1 FINAL REPORT-1993 DENITRIFICATION IN BOTTOMLAND HARDWOOD SOILS OF THE CACHE RIVER
FCR NAV DM-7.3-1983 SOIL DYNAMICS, DEEP STABILIZATION, AND SPECIAL GEOTECHNICAL CONSTRUCTION

CZ-CSN, Soil Hardness Tester

CSN 72 1017-1995 Determination of grain size distribution of soils for geotechnical purposes
CSN 72 1015-1988 Laboratory determination of com- pactibility of soils
CSN 72 1027-1983 Laboratory determination of soil compressibility in the oedometer apparatus
CSN ISO 6275:1994 Concrete, hardened . Determination of density
CSN 73 1373-1981 Testing of concrete by hardness testing methods
CSN CEN ISO/TS 17892-1:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
CSN 72 1018-1970 Laboratory determination of relative mature of cohesionless soils
CSN 25 0264-1976 Diamond indenters for Vickers hardness testing machines
CSN 25 0270-1974 Verification of Rockwell superficial N and T scale hardness testing machines

水利部, Soil Hardness Tester

SL/T 810-2021 Soil moisture monitoring instrument inspection and testing procedures

BE-NBN, Soil Hardness Tester

BR-ABNT, Soil Hardness Tester

Professional Standard - Meteorology, Soil Hardness Tester

QX/T 75-2007 Soil moisture measurement by microwave oven

Japanese Industrial Standards Committee (JISC), Soil Hardness Tester

JIS A 1225:2000 Test method for bulk density of soils
JIS A 1225:2009 Test method for bulk density of soils
JIS A 1202:1990 Test method for density of soil particles
JIS A 1204:1990 Test method for particle size distribution of soils
JIS A 1202:1999 Test method for density of soil particles
JIS A 1204:2000 Test method for particle size distribution of soils
JIS A 1202:2009 Test method for density of soil particles
JIS A 1204:2009 Test method for particle size distribution of soils
JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method
JIS A 1214:1995 Test method for soil density by the sand replacement method
JIS A 1223:2000 Test method for fine fraction content of soils
JIS A 1223:2009 Test method for fine fraction content of soils
JIS A 1214:2001 Test method for soil density by the sand replacement method
JIS A 1214:2013 Test method for soil density by the sand replacement method

未注明发布机构, Soil Hardness Tester

BS ISO 17924:2018(2022) Soil quality — Assessment of human exposure from ingestion of soil and soil material — Procedure for the estimation of the human bioaccessibility / bioavailability of metals in soil
DIN EN 12390-7 Berichtigung 1:2006 Testing of hardened concrete – Part 7: Density of hardened concrete
DIN EN 12390-7:2019 Testing of hardened concrete – Part 7: Bulk density of hardened concrete

AENOR, Soil Hardness Tester

UNE 103601:1996 TEST FOR FREE SWELLING OF SOILS IN OEDOMETER DEVICE.
UNE 103503:1995 DETERMINATION "IN SITU" OF DENSITY OF SOIL BY THE SAND METHOD.
UNE 103302:1994 DETERMINATION OF THE RELATIVE DENSITY OF THE PARTICLES OF A SOIL.
UNE 103103:1994 DETERMINATION OF THE LIQUID LIMIT OF A SOIL BY THE CASAGRANDE APPARATUS METHOD.
UNE-EN 12390-7:2009 Testing hardened concrete - Part 7: Density of hardened concrete
UNE 103301:1994 DETERMINATION OF A SOIL DENSITY. METHOD OF BALANCE WITH WATER BATH.
UNE 77314:2001 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation.
UNE 103602:1996 TEST METHOD FOR ONE-DIMENSIONAL SWELL PRESSURE OF A SOIL IN CONSOLIDOMETER.
UNE 103401:1998 DETERMINATION OF THE SHEAR STRENGTH OF A SOIL WITH THE DIRECT SHEAR BOX.
UNE-EN 16502:2015 Test method for the determination of the degree of soil acidity according to Baumann-Gully

Ningxia Provincial Standard of the People's Republic of China, Soil Hardness Tester

DB64/T 1734-2020 Soil Hydrolyzable Nitrogen Determination Kjeldahl Method

SE-SIS, Soil Hardness Tester

SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor
SIS SS 13 72 17-1980 Concrete testing — Hardened concrete — Density
SIS SS 13 72 12-1978 Concrete testing — Hardened concrete — Flexural strength
SIS SS 13 72 42-1988 Concrete testing - Hardened concrete - Depth of carbonation
SIS SS 13 72 10-1978 Concrete testing — Hardened concrete — Cube strength
SIS SS 13 72 11-1978 Concrete testing — Hardened concrete — Cylinder strength
SIS SS 13 72 21-1984 Concrete testing — Hardened shotcrete — Thickness of shotcrete

Professional Standard - Construction Industry, Soil Hardness Tester

JG/T 3021-1994 Appartus for concrete slump test
JG/T 248-2009 Apparatus for concrete slump test

建设部, Soil Hardness Tester

JG 3021-1994 concrete slump meter

BELST, Soil Hardness Tester

STB 2147-2010 Building geotechnics. Determination of soil consistency by substitution method

Danish Standards Foundation, Soil Hardness Tester

DS 423.17:1984 Testing of concrete. Fresh concrete. Hardening
DS 423.27:1984 Testing of concrete. Hardened concrete. Density
DS/ISO 11508:1999 Soil quality - Determination of particle density
DS/EN 12390-7:2013 Testing hardened concrete - Part 7: Density of hardened concrete
DS/EN 12390-7:2020 Testing hardened concrete – Part 7: Density of hardened concrete
DS/ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
DS 423.45:2002 Testing of concrete - Hardened concrete - Degree of compaction
DS/ISO 17155:2013 Soil quality - Determination of abundance and activity of soil microflora using respiration curves
DS 423.23:1984 Testing of concrete. Hardened concrete. Compressive strength
DS 423.24:1984 Testing of concrete. Hardened concrete. Tensile strength
DS 423.31:1984 Testing of concrete. Hardened concrete. Pull-out strength
DS/CEN/CR 12793:1997 Measurement of the carbonation depth of hardened concrete

KR-KS, Soil Hardness Tester

KS F 2308-2022(英文版) Test method for density of soil particles
KS I ISO 17402-2020 Soil quality — Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials

National Metrological Technical Specifications of the People's Republic of China, Soil Hardness Tester

JJF(纺织) 054-2016 Calibration Specification for Fabric Stiffness Tester
JJF(纺织)054-2016 Calibration Specification for Fabric Stiffness Tester

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Soil Hardness Tester

GB/T 28418-2012 Fundamental technical requirements for soil moisture-monitoring instruments
GB/Z 41359-2022 Soil quality—Determination of abundance and activity of soil microflora using respiration curves
GB/T 27845-2011 Chemicals.Test method for particle-size analysis of soils
GB/T 42488-2023 Soil Quality Determination of Inorganic Nitrogen 15N Abundance in Soil Stable Isotope Ratio Mass Spectrometry
GB/T 32737-2016 Determination of nitrate nitrogen in soil - Ultraviolet spectrophotometry method

AASHTO - American Association of State Highway and Transportation Officials, Soil Hardness Tester

T238-1986 Standard Method of Test for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth) (R 1993) (ASTM D2922-71)
T238-1997 Standard Specification for Density of Soil and Soil-Aggregate In-Place by Nuclear Methods (Shallow Depth) (Nineteenth Edition)
T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2011 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
T 88-2000 Standard Method of Test Particle Size Analysis of Soils
T88-1993 Standard Method of Test for Particle Size Analysis of Soils
M 210-2009 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2006 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
T88-1997 Standard Specification for Particle Size Analysis of Soils (Nineteenth Edition)
T 310-2003 Standard Specification for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
T 310-2006 Standard Specification for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

ES-UNE, Soil Hardness Tester

UNE-EN ISO 17402:2011 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials (ISO 17402:2008) (Endorsed by AENOR in August of 2011.)
UNE-EN 12390-7:2020/AC:2021 Testing hardened concrete - Part 7: Density of hardened concrete
UNE-EN 12390-7:2020 Testing hardened concrete - Part 7: Density of hardened concrete
UNE-EN ISO 17155:2020 Soil quality - Determination of abundance and activity of soil microflora using respiration curves (ISO 17155:2012) (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN 16907-4:2020 Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders

PL-PKN, Soil Hardness Tester

PN-EN 12390-7-2019-08/AC-2021-01 E Testing hardened concrete -- Part 7: Density of hardened concrete
PN-EN ISO 17155-2020-11 E Soil quality -- Determination of abundance and activity of soil microflora using respiration curves (ISO 17155:2012)

CEN - European Committee for Standardization, Soil Hardness Tester

PREN 12390-7-2017 Testing hardened concrete - Part 7: Density of hardened concrete
EN 16907-4:2018 Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders

SG-SPRING SG, Soil Hardness Tester

SS 78 Pt.B2-1992 Testing Concrete Part B2 : Recommendations For Surface Hardness Testing By Rebound Hammer

ZA-SANS, Soil Hardness Tester

SANS 6251:2006 Concrete tests - Density of hardened concrete
SANS 5863:2006 Concrete tests - Compressive strength of hardened concrete
SANS 5864:2006 Concrete tests - Flexural strength of hardened concrete

VN-TCVN, Soil Hardness Tester

TCVN 4195-2012 Soils.Laboratory methods for determination of density
TCVN 4404-1987 Cultivated soil.Methods for determination of hydrolytic acidity
TCVN 5257-1990 Cultivated soil.Determination of particle size distribution (Mechanical analysis)

农业农村部, Soil Hardness Tester

NY/T 3678-2020 Determination of Soil Field Water Capacity by Frame Flooding Instrument Method

The American Road & Transportation Builders Association, Soil Hardness Tester

AASHTO T 310-2010 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 310-2013 Standard Method of Test for In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
AASHTO M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO T 220-1966 Standard Method of Test for Determination of the Strength of Soil-Lime Mixtures

American National Standards Institute （ANSI), Soil Hardness Tester

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

NO-SN, Soil Hardness Tester

NS 3674-1987 Concrete testing - Hardened concrete - Tensile strength
NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples

TH-TISI, Soil Hardness Tester

TIS 1741-1999 Concrete, hardened.determination of density

Henan Provincial Standard of the People's Republic of China, Soil Hardness Tester

DB41/T 1029-2015 General technical specifications for portable rapid soil nutrient analyzer

Defense Logistics Agency, Soil Hardness Tester

DLA MIL-HDBK-816 VALID NOTICE 2-2007 Guidelines for Developing Radiation Hardness Assurance Device Specifications
DLA MIL-HDBK-816 VALID NOTICE 1-2007 GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS
DLA MIL-HDBK-816 CHG NOTICE 1-2002 GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS

CH-SNV, Soil Hardness Tester

SN EN ISO 17155:2020 Soil quality - Determination of abundance and activity of soil microflora using respiration curves (ISO 17155:2012)

NL-NEN, Soil Hardness Tester

NEN 5782-1991 Soil - Unsaturated zone Determination of water content with a neutron depth probe

Professional Standard - Environmental Protection, Soil Hardness Tester

HJ 1129-2020 Technical specifications for measuring gamma nuclides in soil by in-situ high-purity germanium spectrometer
HJ 1051-2019 Soil Petroleum Determination Infrared Spectrophotometry

Professional Standard - Coal, Soil Hardness Tester

MT/T 1060-2008 Concrete strength testing in strument in coal mine

国家安全生产监督管理总局, Soil Hardness Tester

MT/T 1060-2007 Mining concrete strength tester

Professional Standard - Water Conservancy, Soil Hardness Tester

SL 606-2012 Measuring instruments for soil moisture evaporation.Part 1:Evaporator of the hydraulic type

国家市场监督管理总局、中国国家标准化管理委员会, Soil Hardness Tester

GB/T 41184.1-2021 Measuring instruments for soil moisture evaporation—Part 1:Evaporator of the hydraulic type

Heilongjiang Provincial Standard of the People's Republic of China, Soil Hardness Tester

DB23/T 1579-2014 Determination of Mercury Content in Soil in Mobile Laboratory - Direct Reading Mercury Meter Method

CU-NC, Soil Hardness Tester

NC 54-140-1986 Construction Material and Products. Soils. Determination of Humidity "in situ"

Hubei Provincial Standard of the People's Republic of China, Soil Hardness Tester

DB42/T 1086-2015 Spectrophotometric method for the determination of forest soil organic matter