ZH
RU
ES

Light Hardness Tester

Light Hardness Tester, Total:489 items.

In the international standard classification, Light Hardness Tester involves: Pharmaceutics, Paper and board, Non-ferrous metals, Plastics, Vibrations, shock and vibration measurements, Testing of metals, Reinforced plastics, Medical equipment, Optics and optical measurements, Radiation measurements, Rubber, Transport, Road engineering, Lamps and related equipment, Mechanical testing, Optoelectronics. Laser equipment, Cereals, pulses and derived products, Fibre optic communications, General methods of tests and analysis for food products, Optical equipment, Powder metallurgy, Analytical chemistry, Products of the textile industry, Textile fibres, Linear and angular measurements, Organic chemicals, Aids for disabled or handicapped persons, Paints and varnishes, Characteristics and design of machines, apparatus, equipment, Metrology and measurement in general, Coals, Electrical and electronic testing, Particle size analysis. Sieving, Leather technology, Construction industry, Metalliferous minerals, Equipment for petroleum and natural gas industries, Paint ingredients, Products of the chemical industry, Construction materials, Air quality, Internal combustion engines, Diagnostic, maintenance and test equipment, Surface treatment and coating, Non-destructive testing, Rubber and plastics products, Radiation protection, Iron and steel products, Glass, Geology. Meteorology. Hydrology, Document imaging applications, Quality, Astronomy. Geodesy. Geography, CONSTRUCTION MATERIALS AND BUILDING, Welding, brazing and soldering, Vocabularies, Lubricants, industrial oils and related products, Petroleum products in general, Occupational safety. Industrial hygiene, Solar energy engineering, Measurement of fluid flow, Pulps, Waxes, bituminous materials and other petroleum products.

Professional Standard - Machinery, Light Hardness Tester

JB/T 20104-2007 Hardness tester
JB/T 10574-2006 Optical length measuring instruments - Basic parameters
JB/T 10574-2013 Basic parameters of optical length measuring instruments
JB/T 11938-2014 Ammonia-nitrogen automatic analyzers for laboratory.Nessler's reagent spectrophotometry
JB/T 8204-1996 Rolling bearing laser ball surface roughness measuring instrument

工业和信息化部, Light Hardness Tester

JB/T 20104-2022 Tablet Hardness Tester
WJ/T 741-2014 Test method for cleanliness of glue used in optical instruments

IN-BIS, Light Hardness Tester

IS 8661-1977
IS 13783-1993 Optics and optical instruments. Ophthalmology. Graduated dial scale
IS 12803-1989
IS 12483-1988
IS 12813-1989
IS 9459-1980

AT-ON, Light Hardness Tester

ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor
ONORM EN 24501-1994 Hardmetals. Determination of titanium. Photometric peroxide method (ISO 4501:1978)
OENORM EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)

SE-SIS, Light Hardness Tester

SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor
SIS SS 11 03 40-1983 Hardness test - Vickers test HV 0,2 to HV100- Direct verification of testing machines
SIS SS 11 03 37-1987 Metallic materials - Hardness test - Calibration of standardized blocks to be used for Rockwell Hardness testing machines. Scales A-B-C-D-E-F- G-H-K

National Metrological Technical Specifications of the People's Republic of China, Light Hardness Tester

JJF(纺织) 054-2016 Calibration Specification for Fabric Stiffness Tester
JJF(纺织)054-2016 Calibration Specification for Fabric Stiffness Tester
JJF(纺织) 054-2006 Calibration specification for fabric stiffness tester by inclined plane method
JJF 1568-2016 Specification for Calibration of Spectrophotometric Flow Analyzers
JJF 1211-2008 Calibration Specification for Static Light Scattering Particle Size Analyzers
JJF(纺织) 039-2020 Calibration Specification for Polarization Maturity Testers of Cotton Fiber
JJF(纺织)039-2020 Calibration Specification for Polarization Maturity Testers of Cotton Fiber
JJF(纺织) 039-2006 Calibration specification for cotton fiber polarization maturity meter
JJF 1456-2014 Calibration Specification for Optical Degree of Polarization Meter for Telecommunications
JJF(纺织) 079-2018 Calibration Specification for Color Fastness to Light Yellowing Tester
JJF(纺织)079-2018 Calibration Specification for Color Fastness to Light Yellowing Tester
JJF 1252-2010 Calibration Specification for Measuring Instrument for Laser Paralleism of Micrometers

Japanese Industrial Standards Committee (JISC), Light Hardness Tester

JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method
JIS C 6182:1991 Test methods of optical power meters for laser beam
JIS C 6184:1993 Test methods of optical power meters for optical fiber
JIS C 1609-1:2006 Illuminance meters Part 1: General measuring instruments
JIS B 7910:1997 Electro-optical distance measuring instruments (EDM) -- Field procedures for determining accuracy
JIS C 1609-2:2008 Illuminance meters -- Part 2: Measuring instruments used in transaction or certification
JIS D 8005:2009 Road vehicles -- Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas

Professional Standard - Military and Civilian Products, Light Hardness Tester

WJ 1028-1994 Optical instrument parts Thin hard goggles
WJ 1030-1994 Optical instrument parts Thick hard goggles
WJ 1029-1994 Medium-thick hard goggles for optical instrument parts
WJ 2017-1991 Aluminum and aluminum alloy hard anodized layer for military optical instruments
WJ 741-1994 Test method for cleanliness of adhesives used in optical instruments
WJ 744-1994 Test method for tensile strength of adhesives for optical instruments
WJ 745-1994 Test method for compressive shear strength of adhesives for optical instruments

American Society for Testing and Materials (ASTM), Light Hardness Tester

ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E388-04(2023) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM D2821-09 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00(2005) Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-00(2005)e1 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM D2821-19 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM C204-07 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM C204-17 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM E2108-05 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D5767-95(1999) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D5767-95(2012) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D7298-06(2011)e1 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM D7512-09 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM E2108-00 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM E2540-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM E1709-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM C490-00a Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-11e1 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

未注明发布机构, Light Hardness Tester

BS EN ISO 9339-1:1998 Optics and optical instruments — Contact lenses — Determination ofthe thickness — Part 1 : Rigid contact lenses
BS EN ISO 9340:1999 Optics and optical instruments — Contact lenses — Determination ofstrains for rigid contact lenses
BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
BS EN ISO 9341:1998 Optics and optical instruments — Contact lenses — Determination ofinclusions and surface imperfections for rigid contact lenses

National Metrological Verification Regulations of the People's Republic of China, Light Hardness Tester

JJG(烟草) 06-2006 Cigarette/filter rod hardness tester test regulation
JJG 941-1998 Fluorescent Luminance Meter
JJG 167-2020 Laser particle size distribution analyzer
JJG(烟草) 04-1998 Verification Regulations for Cigarette Hardness Tester by Total Pressing Method
JJG 998-2005 Laser Measuring Instruments for Small Angles
JJG(烟草) 06-1998 Verification rules for cigarette/filter rod hardness tester by point pressure method
JJG(纺织) 065-1995 Verification rules for fabric stiffness tester by inclined plane method
JJG 941-2009 Verification Regulation of Fluoresent Luminance Meter
JJG(交通) 075-2010 Vehicle Bearing Road Laser Profilometer
JJG 交通075-2010 Vehicle-mounted road surface laser roughness meter
JJG 922-1996 Verification Regulation of The Standard Device of Vertex Power for Refractometers
JJG 902-1995 Verification Regulation of Patical Size Meter by Photosedimention
JJG 922-2008 Verification Regulation of Standard Devices of Vertex Power for Eye Refractometers
JJG(纺织) 049-1991 Cotton Fiber Polarizing Maturity Tester Verification Regulations
JJG 1104-2015 Dynamic Light Scattering Particle Size Analyzers
JJG 828-1993 Verification Regulation of Laser Measuring Instrument for Paralleism of Micrometer
JJG(交通) 075-2007 Vehicle bearing road laser profilometer
JJG 075-2010 Verification regulations for vehicle-mounted road surface laser roughness meter
JJG(地质) 1019-1990 SKC-2000 Type Light Transmission Particle Size Distribution Tester Verification Regulations
JJG(铁道) 150-1994 Verification Regulation of Optical Instrument for the Height and off Center Deviation of Contact Wire

Group Standards of the People's Republic of China, Light Hardness Tester

T/SHZSAQS 00119-2022 Leeb Hardness Tester Operating Technical Regulations
T/QGCML 936-2023 Portable High Precision Laser Marking Instrument
T/CCAS 006-2018 Validation and comprehensive evaluation specification of laser particle size analyzer (wet method)

American National Standards Institute （ANSI), Light Hardness Tester

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ANSI/TAPPI T1217 sp-2012 Photometric linearity of optical properties instruments
ANSI/ASTM D5650:1997 Test Method for Use of the Taber-Type Tester for Stiffness in the Expanded 0-10 Taber Stiffness Unit Range
ANSI/TAPPI T271 om-2012 Fiber length of pulp and paper by automated optical analyzer using polarized light

European Committee for Standardization (CEN), Light Hardness Tester

EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor
EN ISO 8429:1996 Optics and Optical Instruments - Opthamology - Graduated Dial Scale
EN 12373-13:2000 Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer
EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
EN ISO 4518:1995 Metallic Coatings - Measurement of Coating Thickness - Profilometric Method (ISO 4518:1990)
EN ISO 9339-1:1998 Optics and Optical Instruments - Contact Lenses - Determination of the Thickness - Part 1: Rigid Contact Lenses ISO 9339-1:1996
EN 24501:1993 Hardmetals; determination of titanium; photometric peroxide method (ISO 4501:1978)
EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
EN ISO 9339-2:1998 Optics and Optical Instruments - Contact Lenses - Determination of Thickness - Part 2: Hydrogel Contact Lenses ISO 9339-2:1998
EN ISO 13694:2000 Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Power (Energy) Density Distribution Incorporating corrigendum October 2007
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

German Institute for Standardization, Light Hardness Tester

DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
DIN EN ISO 8429:1996 Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986); German version EN ISO 8429:1996
DIN EN ISO 8598-1:2015-01 Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO 8598-1:2014); German version EN ISO 8598-1:2014
DIN EN ISO 8429:1996-08 Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986); German version EN ISO 8429:1996
DIN ISO 48-9:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN 61207-6:1995 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994
DIN 18723-4:1990 Field procedure for precision testing of surveying instruments; optical distance measuring instruments
DIN EN 61207-6:2016-03 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015 / Note: DIN EN 61207-6 (1995-02) remains valid alongside this standard until 2017-12-30.
DIN 58395:1976 Temperature ranges for lubricants for optical instruments
DIN 58727-1:2015 Production in optical engineering - Surfacing pins for optics processing machines - Part 1: Without ball point cemented metal carbide
DIN ISO 48-9:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN ISO 11421:2010-10 Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement (ISO 11421:1997)
DIN 58727-1:1973 Surfacing pins for optics processing machines, without ball point cemented metal carbide
DIN ISO 4501:1994 Hardmetals; determination of titanium; photometric peroxide method; identical with ISO 4501:1978
DIN 53121:2014 Testing of paper and board - Determination of the bending stiffness by the beam method
DIN EN 10267:1998 Ferritc-pearlitic steels for precipitation hardening from hot-working temperatures; German version EN 10267:1998
DIN 53121:2008 Testing of paper and board - Determination of the bending stiffness by the beam method
DIN ISO 9022-2:2003 Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2002)
DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
DIN EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN ISO 4501:1994-05 Hardmetals; determination of titanium; photometric peroxide method; identical with ISO 4501:1978
DIN EN 10267:1998-02 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures; German version EN 10267:1998
DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN ISO 22826:2008 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
DIN EN ISO 22826:2020 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German and English version prEN ISO 22826:2020
DIN EN ISO 22826:2021-05 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German version EN ISO 22826:2021
DIN ISO 9022-5:1999 Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994)
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN 61207-6:2016 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015
DIN EN ISO 13694 Berichtigung 1:2008 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000, Corrigendum to DIN EN ISO 13694:2000-11; German version EN ISO 13694:

Danish Standards Foundation, Light Hardness Tester

DS/EN ISO 8598:1998 Optics and optical instruments - Focimeters
DS/EN ISO 8429:1997 Optics and optical instruments - Ophthalmology - Graduated dial scale
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DS/EN 24501:1994 Hardmetals-Determination of titanium-Photometric peroxide method
DS/ISO 4501:1994 Hardmetals - Determination of titanium - Photometric peroxide method
DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method
DS/EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
DS/EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
DS/EN ISO 22826:2021 Destructive tests on welds in metallic materials – Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

国家质量技术监督局, Light Hardness Tester

GB/T 17341-1998 Optics and optical instruments--Focimeters

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Light Hardness Tester

GB 17341-1998 Optics and optical instruments--Focimeters
GB/T 8432-1987 Humidity test control for colour fastness to light
GB/T 6098.2-1985 Test method for length of cotton fibres--Photoelectric length method
GB 8432-1987 Humidity test control for colour fastness to light
GB/T 3720-1988 Optical length measuring instruments--Basic parameters
GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
GB/T 13780-1992 Test method for cotton length--auto-photoelectric stapler
GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 6099.2-1992 Test method for maturity of cotton fibres—Polarized apparatus method
GB/Z 42358-2023 Determination of Accuracy of Wavelength Dispersive X-ray Fluorescence Spectrometer for Iron Ore
GB/T 9338-1988 Method of instrumental measurement of whiteness of fluorescent whitening agents
GB/T 9338-2008 Fluorescent whitening agents.Determination of relative whiteness.Instrumental measurement
GB/T 42400-2023 Hardness test method of metal parts repaired by laser cladding
GB/T 7962.18-2010 Test methods of colourless optical glass.Part 18:Knoop hardness
GB/T 31378-2015 Test method for surface hardness of flat panel display (FPD) polarizing film
GB/T 7962.21-1987 Colourless optical glass test methods--Knoop hardness
GB/T 25898-2010 Instrumented nanoindentation test.Indentation hardness and modulus of thin film
GB/T 20506-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
GB/T 7962.19-1987 Colourless optical glass test methods--Relative lapping hardness
GB 5124.4-1985 Methdos for chemical analysis of hardmetals－The photometric peroxide method for the determination of titanium content
GB/T 5124.4-1985 Methods for chemical analysis of hardmetals--The photometric peroxide method for the determination of titanium content
GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
GB/T 21838.1-2008 Metallic materials.Instrumented indentation test for hardness and materials parameters.Part 1:Test method

Korean Agency for Technology and Standards (KATS), Light Hardness Tester

KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS C 7619-1979(2017) Photometric measurement on mirror - condenser lamps for projector
KS B ISO 12857-2-2002(2017) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 2：Theodolites
KS B ISO 11421-2001(2016) Optics and optical instruments－Accuracy of optical transfer function(OTF) measurement
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS B ISO 12857-2-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 2：Theodolites
KS B ISO 12857-1-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 1：Levels
KS B ISO 11421-2001(2021) Optics and optical instruments－Accuracy of optical transfer function(OTF) measurement
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B ISO 12857-1:2002 Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 1：Levels
KS B ISO 12857-2:2002 Optics and optical instruments-Geodetic instruments-Field procedures for determining accuracy-Part 2:Theodolites
KS C IEC 61207-6-2014(2019) Expression of performance of gas analyzers — Part 6: Photometric analyzers
KS B ISO 13694:2015 Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
KS B ISO 13694:2006 Optics and optical instruments-Lasers and laser-related equipments-Test methods for laser beam power(energy) density distribution
KS B ISO 11990-2015(2020) Optics and optical instruments ― Laser and laser-related equipment ― Determination of laser resistance of tracheal tube shafts
KS B 5632-2019 Electro-optical distance measuring instruments(EDM) — Field procedures for determining accuracy
KS P ISO 8597:2006 Optics and optical instruments-Visual acuity testing-Method of correlating optotypes
KS D ISO 4501:2003 Hardmetals－Determination of titanium－Photometric peroxide method
KS D ISO 4501-2003(2018) Hardmetals－Determination of titanium－Photometric peroxide method
KS D ISO 4519:2009 Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes
KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
KS B ISO 13653:2006 Optics and optical instruments-General optical test methods-Measurement of relative irradiance in the image field
KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS B ISO 13694-2015(2020) Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
KS B ISO 13653-2006(2021) Optics and optical instruments — General optical test methods —Measurement of relative irradiance in the image field
KS B ISO 13653-2006(2016) Optics and optical instruments — General optical test methods —Measurement of relative irradiance in the image field
KS B ISO 22826-2016(2021) Destructive tests on welds in metallic materials－Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
KS B ISO 22826:2006 Destructive tests on welds in metallic materials-Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
KS B ISO 22826:2016 Destructive tests on welds in metallic materials－Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
KS B ISO 8600-2:2006 Optics and optical instruments-Medical endoscopes and endoscopic accessories-Part 2:Particular requirements for rigid bronchoscopes
KS B ISO 8600-2:2016 Optics and optical instruments－Medical endoscopes and endoscopic accessories－Part 2：Particular requirements for rigid bronchoscopes
KS B ISO 9339-1:2004 Optics and optical instruments-Contact lenses-Determination of the thickness-Part 1:Rigid contact lenses
KS B ISO 9339-1:2014 Optics and optical instruments — Contact lenses — Determination of the thickness — Part 1: Rigid contact lenses
KS B ISO 9339-1-2014(2019) Optics and optical instruments — Contact lenses — Determination of the thickness — Part 1: Rigid contact lenses
KS D ISO 11692-2003(2013) Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 9339-2:2004 Optics and optical instruments-Contact lenses-Determination of thickness-Part 2:Hydrogel contact lenses
KS B ISO 9339-2:2014 Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
KS B ISO 9339-2-2014(2019) Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses
KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS B ISO 12857-1-2002(2017) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 1：Levels
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer

Defense Logistics Agency, Light Hardness Tester

DLA MIL-HDBK-816 VALID NOTICE 2-2007 Guidelines for Developing Radiation Hardness Assurance Device Specifications
DLA MIL-HDBK-816 VALID NOTICE 1-2007 GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS
DLA MIL-HDBK-816 CHG NOTICE 1-2002 GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS
DLA A-A-50767 VALID NOTICE 3-2006 ANALYZER, SURFACE FINISH
DLA A-A-50767 VALID NOTICE 2-2001 ANALYZER, SURFACE FINISH
DLA A-A-50767 VALID NOTICE 1-1995 ANALYZER, SURFACE FINISH
DLA A-A-50767-1983 ANALYZER, SURFACE FINISH

British Standards Institution (BSI), Light Hardness Tester

BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS EN ISO 8429:1997 Optics and optical instruments. Ophthalmology. Graduated dial scale
BS EN ISO 8429:1987 Optics and optical instruments - Ophthalmology - Graduated dial scale
BS EN 24501:1994 Hardmetals. Determination of titanium. Photometric peroxide method
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS EN ISO 15254:2009 Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision
BS EN 61207-6:2015 Tracked Changes. Expression of performance of gas analyzers. Photometric analyzers
BS EN ISO 22826:2021 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Light scattering aerosol spectrometer
BS PD ISO/TR 18231:2016 Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
PD ISO/TR 18231:2016 Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
BS EN ISO 13694:2001 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS EN 62533:2016 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
BS ISO 13653:1997 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS IEC 62533:2010 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
BS ISO 11877:2008 Hardmetals - Determination of silicon in cobalt metal powders - Photometric method
BS ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS ISO 22826:2006 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS ISO 11614:1999 Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
BS ISO 9022-19:1995 Optics and optical instruments. Environmental test methods. Temperature cycles combined with sinusoidal or random vibration
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks

International Organization for Standardization (ISO), Light Hardness Tester

ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 8429:1986 Optics and optical instruments; Ophthalmology; Graduated dial scale
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 12857-3:1997 Optics and optical instruments - Geodetic instruments - Field procedures for determining accuracy - Part 3: Electro-optical distance meters (EDM instruments)
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO 12857-2:1997 Optics and optical instruments - Geodetic instruments - Field procedures for determining accuracy - Part 2: Theodolites
ISO 15254:2009 Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision
ISO/TR 18231:2016 Iron ores - Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision
ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
ISO 8597:1994 Optics and optical instruments - Visual acuity testing - Method of correlation optotypes
ISO 4501:1978 Hardmetals; Determination of titanium; Photometric peroxide method
ISO 11614:1999 Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
ISO 13653:1996 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field
ISO 7759:1983 Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
ISO 11877:2008 Hardmetals - Determination of silicon in cobalt metal powders - Photometric method
ISO 13694:2000/Cor 1:2005 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1
ISO 8322-6:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 6: laser instruments
ISO 8322-3:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 3: optical levelling instruments
ISO 8255-1:1986 Optics and optical instruments; Microscopes; Cover glasses; Part 1 : Dimensional tolerances, thickness and optical properties
ISO 9339-1:1996 Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses
ISO 11692:1994 Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
ISO 22826:2005 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
ISO 8600-2:2002 Optics and optical instruments - Medical endoscopes and endoscopic accessories - Part 2: Particular requirements for rigid bronchoscopes
ISO 8600-2:2015 Endoscopes - Medical endoscopes and endotherapy devices - Part 2: Particular requirements for rigid bronchoscopes
ISO 8322-5:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 5: optical plumbing instruments
ISO 8597:1994/Cor 1:1995 Optics and optical instruments - Visual acuity testing - Method of correlating optotypes; Technical Corrigendum 1
ISO 9339-2:1998 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
ISO 15472:2001 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method

BR-ABNT, Light Hardness Tester

ABNT P-MB-416-1967
ABNT NBR ISO 8429:2011 Optics and optical instruments - Ophthalmology - Graduated scale indicating

Association Francaise de Normalisation, Light Hardness Tester

NF S12-111*NF EN ISO 8429:1996 Optics and optical instruments. Ophthalmology. Graduated dial scale.
NF EN ISO 8429:1996 Optique et instruments d'optique - Ophtalmologie - Échelle graduée.
NF E11-016:1987 Length measuring instruments - Fringe counting,laser source interferometers
E11-016:1987 Length measuring instruments. Fringe counting, laser source interferometers.
NF EN ISO 22665:2013 Optique et instruments ophtalmiques - Appareil pour le mesurage de la longueur axiale de l'oeil
NF EN ISO 8598-1:2014 Optique et instruments d'optique - Frontofocomètres - Partie 1 : instruments pour cas généraux
NF T01-036:1980 Molecular absorption spectrophotometry. Methods of inspection of apparatus.
NF S10-044*NF ISO 11421:1999 Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement
NF ISO 11421:1999 Optique et instruments d'optique - Exactitude du mesurage de la fonction de transfert optique (OTF)
NF EN 61207-6:2015 Expression des performances des analyseurs de gaz - Partie 6 : analyseurs photométriques
NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
NF EN ISO 22826:2021 Essais destructifs des soudures sur matériaux métalliques - Essais de dureté sur joints étroits soudés par faisceau d'électrons et faisceau laser (Essais de dureté Vickers et Knoop)
NF EN 24501:1994 Métaux durs - Détermination du titane - Méthode photométrique au peroxyde.
NF C46-251-6*NF EN 61207-6:2015 Expression of performance of gas analyzers - Part 6 : photometric analyzers
NF C46-256:1994 Expression of performance of gas analysers. Part 6 : photometric analyzers.
NF S12-113:1996 Optics and optical instruments. Visual acuity testing. Method of correlating optotypes.
NF S11-610:1996 Optics and optical instruments. Contact lenses. Part 1 : specification for rigid corneal and scleral contact lenses.
NF S12-024-1:1988 OPTICS AND OPTICAL INSTRUMENTS. MICROSCOPES. COVER GLASSES. PART 1 : DIMENSIONAL TOLERANCES,THICKNESS AND OPTICAL PROPERTIES.
NF A95-484*NF EN 24501:1994 Hardmetals. Determination of titanium. Photometric peroxide method.
NF X11-682:1984
NF S10-045:1999 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field.
NF C19-533*NF EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
NF EN 62533:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection photonique de matières radioactives
NF A89-209*NF EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
NF A33-111*NF EN 10267:1998 Ferritic-pealitic steels for precipitation hardening from hot-working temperatures.
NF X21-055:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales.
NF EN 10267:1998 Aciers de type ferrite-perlite aptes au durcissement par précipitation à partir des températures de formage à chaud
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF P98-218-3:1995 Tests relating to pavements. Evenness tests. Part 3 : determination of longitudinal evennes indexes calculated from profilometer data.
NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.

国家市场监督管理总局、中国国家标准化管理委员会, Light Hardness Tester

GB/T 40177-2021 Optics and optical instruments—Ophthalmology—Graduated dial scale
GB/T 41322-2022 Hardmetals—Determination of silicon in cobalt metal powders—Photometric method
GB/T 21838.1-2019 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method

Professional Standard - Traffic, Light Hardness Tester

JT/T 832-2012 LED luminous intensity tester
JT/T 676-2007 Vehicle bearing road laser profilometer
JT/T 676-2009 Vehicle bearing road laser profilometer
JT/T 840-2012 Vehicle bearing road laser texture-meter

CZ-CSN, Light Hardness Tester

CSN 25 0264-1976 Diamond indenters for Vickers hardness testing machines
CSN 25 0270-1974 Verification of Rockwell superficial N and T scale hardness testing machines
CSN 99 7101-1990 System EAN. Bar Code UCC/EAN 128. Application Identifiers
CSN 44 1381-1981 Hard and brown coals Spectrophotometric determination of beryllium
CSN 25 0270-1985 Rockwell hardness testing machines, scales N and I. Technical requirements. Methods of verification.
CSN 42 0636 Cast.8-1974 Chemical analysis of hard lead. Determination of iron. Photometric method
CSN 42 0636 Cast.10-1974 Chemical analysis of hard lead Determination of tin. Photometric method
CSN 42 0636 Cast.3-1974 Chemical analysis of hard lead. Determination of arsenic. Photometric method
CSN 42 0636 Cast.7-1974 Chemical analysis of hard lead. Determination of copper. Photometric method
CSN 42 0636 Cast.6-1974 Chemical analysis of hard lead. Determination. of bismuth. Photometric method
CSN 25 0260-1967 Verification of standardized blocks to be_ used for Rockwell B, C & A settle hardness testing machines
CSN 25 0271-1974 Calibration of standardized' blocks to be used for Rpckwell superficial N and T ?cale hardness testing machines
CSN 42 0641 Cast.12-1984 Nickel alloys. Determination of sulphur by the titrimetric method, photometric method and methods with the use of automatic analyzers
CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish

Standard Association of Australia （SAA）, Light Hardness Tester

AS ISO 8598.1:2017 Optics and optical instruments — Focimeters, Part 1: General purpose instruments
AS 2563:1996 Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision
AS 2563:2019 Iron ores — Wavelength dispersive X-ray fluorescence spectrometers — Determination of precision
AS/NZS ISO 13694:2004 Optics and optical instruments - Lasers and laser-related equipment -Test methods for laser beam power (energy) density distribution

Jilin Provincial Standard of the People's Republic of China, Light Hardness Tester

DB22/T 1930-2013 Metal Rockwell Hardness Tester Depth Sounding Device Detector

AENOR, Light Hardness Tester

UNE-EN ISO 8429:1996 OPTICS AND OPTICAL INSTRUMENTS. OPHTHALMOLOGY. GRADUATED DIAL SCALE. (ISO 8429:1986).
UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)
UNE-EN ISO 8598-1:2015 Optics and optical instruments - Focimeters - Part 1: General purpose instruments. (ISO 8598-1:2014)
UNE-EN 10267:1998 FERRITIC-PEARLITIC STEELS FOR PRECIPITATION HARDENING FROM HOT-WORKING TEMPERATURES.

U.S. Military Regulations and Norms, Light Hardness Tester

ARMY MS51600 REV A NOTICE 4-1997 FILTER, LIGHT, OPTICAL INSTRUMENT (VARIABLE DENSITY) BINOCULAR TYPE
ARMY MS51600 REV A REINST NOTICE 3-1996 FILTER, LIGHT, OPTICAL INSTRUMENT (VARIABLE DENSITY) BINOCULAR TYPE
ARMY MS51600 REV A VALID NOTICE 1-1987 FILTER, LIGHT, OPTICAL INSTRUMENT (VARIABLE DENSITY) BINOCULAR TYPE
ARMY MS51600 REV A-1967 FILTER, LIGHT, OPTICAL INSTRUMENT (VARIABLE DENSITY) BINOCULAR TYPE

Professional Standard - Grain, Light Hardness Tester

LS/T 1215-2008 Technical specification for calibrating wheat hardness index tester
LS/T 3704-2007 Technical requirements and test method for wheat hardness index tester

Lithuanian Standards Office , Light Hardness Tester

LST EN ISO 8429:2000 Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986)
LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN 61207-6-2001 Expression of performance of gas analyzers. Part 6: Photometric analyzers (IEC 61207-6:1994)
LST EN 24501-2000 Hardmetals - Determination of titanium - Photometric peroxide method (ISO 4501:1978)
LST EN 10267-2001 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
LST EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000)
LST EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
LST EN ISO 13694:2000/AC:2008 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000/Cor 1:2005)

Professional Standard - Commodity Inspection, Light Hardness Tester

SN/T 4779.3-2017 Determination of total hardness in bottled water for export---Method by specrophotometry coupled with flow injection analysis(FIA)

RU-GOST R, Light Hardness Tester

GOST 3178-1975 Optical bench instruments. Height of arrangement of optical axis and exit pupil
GOST 5233-1989 Paint materials. Method for determination of coating hardness pendulum instrument
GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
GOST 32246-2013 Hard coals. Method for the spectrometric determination of genetic and technological parameters
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 21318-1975 Measurement of microhardness by scratch diamond instruments
GOST 22091.8-1984 X-ray devices. Method of measuring spectral structure and relative spectrum contamination
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
GOST 22091.14-1986 X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation
GOST 4.448-1986 Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices
GOST R ISO 13694-2010 Optics and optical instruments. Laser and laser-related equipment. Test methods for laser beam power (energy) density distribution
GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
GOST R ISO 22826-2012 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness test)
GOST 28976-1991 Photovoltaic devices of crystalline silicon. Procedures for temperature and irradiance corrections to measured current voltage characteristics
GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types

Taiwan Provincial Standard of the People's Republic of China, Light Hardness Tester

CNS 9939-1986 Method of Test for Knoop Hardness of Optical Glasses

HU-MSZT, Light Hardness Tester

GOSTR, Light Hardness Tester

GOST R 58867-2020 Instrument rolling bearings. Methods of measuring hardness parts of bearings
GOST ISO 22826-2017 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

NL-NEN, Light Hardness Tester

NEN 6549-1988 Water for boiler plants Photometric determination of total hardness
NEN-ISO 4501:1994 Hardmetals. Determination of titanium. Photometric peroxide method (ISO 4501:1978)

Professional Standard - Nuclear Industry, Light Hardness Tester

EJ/T 904-1994 Single Photon Bone Mineral Densitometer

工业和信息化部/国家能源局, Light Hardness Tester

JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer

CU-NC, Light Hardness Tester

NC 41-46-1987 Leather. Determination of Starching Flexural Strength by Means of Bally Flexometer Testing Method
NC 43-29-1987 Artificial and Natural Wood Industry. Furniture. Methods for the Determination of Scratch Hardness in Surface Finish

Professional Standard - Medicine, Light Hardness Tester

YY/T 1146-2016 Measurement methods of illuminance for medical optical instruments
YY 91146-1999 Test method of illumination intensity for medical optical instrument
YY/T 0756-2009 Optics and Optical Instruments Lasers and Laser-related Equipment Laser Beam Power (Test Method for Energy Density Distribution

CENELEC - European Committee for Electrotechnical Standardization, Light Hardness Tester

EN 61207-6:1994 Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers

ES-UNE, Light Hardness Tester

UNE-EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers (Endorsed by AENOR in February of 2015.)
UNE-EN 24501:1993 HARDMETALS. DETERMINATION OF TITANIUM. PHOTOMETRIC PEROXIDE METHOD. (Endorsed by AENOR in January of 1994.)
UNE-EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
UNE-EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material (Endorsed by AENOR in April of 2016.)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Light Hardness Tester

GB/T 33051-2016 Optical functional films—Superficial hardening film—Determination of thickness of hardening coating
GB/T 34917-2017 Determination of gelation degree of unplasticized poly(vinyl chloride)(PVC-U) products—Torque rheometer method
GB/T 5124.4-2017 Hardmetals—Part 4：Determination of titanium content—Photometric peroxide method

European Committee for Electrotechnical Standardization（CENELEC）, Light Hardness Tester

EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material

RO-ASRO, Light Hardness Tester

STAS SR EN 24501-1994 Hardmetals. Determination of titanium. Photometric peroxide method
STAS SR ISO 8322-3:1995 Building construction - Measuring instruments- Procedures for determining accuracy in use. Part 3: Optical levelling instruments
STAS SR ISO 8255-1:1995 Optics and optical instruments Microscopes — Cover glasses Part 1: Dimensional tolerances, thickness and optical properties

(U.S.) Ford Automotive Standards, Light Hardness Tester

FORD WSS-M4D871-A5-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED ***TO BE USED WITH FORD M99P1111-A***

YU-JUS, Light Hardness Tester

JUS E.B8.035-1987 Durum wheat for milling industry, Estimation of yellowpigment. Spectrophotometric method

KR-KS, Light Hardness Tester

KS D ISO 4501-2003(2023) Hardmetals－Determination of titanium－Photometric peroxide method
KS B ISO 22826-2016 Destructive tests on welds in metallic materials－Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)

VE-FONDONORMA, Light Hardness Tester

NORVEN 55-34-1961

ZA-SANS, Light Hardness Tester

SANS 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method

Military Standard of the People's Republic of China-General Armament Department, Light Hardness Tester

GJB 595.8-1988 Environmental test methods for artillery optical instruments Temperature-humidity-vibration test
GJB 8687-2015 Calibration procedures for optical film refractive index and thickness testers
GJB 3766-1999 Method for measuring the thickness of hard-based explosive foil of impact disk detonators - Surface profilometer method
GJB 595.4-1988 Environmental test methods for artillery optical instruments Temperature shock test

Professional Standard - Meteorology, Light Hardness Tester

QX/T 271-2015 Interval of maintenance and intercomparison for Aethalometer based on optical attenuation method

SG-SPRING SG, Light Hardness Tester

SS 78 Pt.B2-1992 Testing Concrete Part B2 : Recommendations For Surface Hardness Testing By Rebound Hammer
SS 373 Pt.5-1994 Specification for optics and optical instruments - contact lenses Part 5: Determination of thickness of rigid contact lenses

BE-NBN, Light Hardness Tester

NBN 537-1960
NBN-ISO 8322-6:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 6 : Laser instruments
NBN-ISO 8322-5:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 5 : Optical plumbing instruments

United States Navy, Light Hardness Tester

NAVY MIL-STD-1322-719-1969 PALLETIZING DOMESTIC UNIT LOAD GRENADE, H.I., MK 1 MOD 0 (IN FLARE CONTAINER MK 4 MOD 0)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Light Hardness Tester

GJB/J 5463-2005 Verification regulation for measurement equipment of optical film refractive index and thickness

Professional Standard - Aviation, Light Hardness Tester

HB 980-1973 Carbide double-ended smooth surface gauge for precision grades 1-8 D>3-6mm
HB 779-1973 1-8 grades of precision with carbide sleeve measuring head double-headed smooth plug gauge D>30-80mm

American Gear Manufacturers Association, Light Hardness Tester

AGMA 98FTM3-1998 Basic Studies on Fatigue Strength of Case-Hardened Gear Steel - Effects of Shot Peening and/or Barrelling Processes

Professional Standard - Environmental Protection, Light Hardness Tester

HJ 924-2017 Technical requirements and detection methods of COD photometric rapid detector

Professional Standard - Textile, Light Hardness Tester

FZ/T 20026-2013 Test method for fibre length and diameter of wool top & slivers.Optical analyser

IT-UNI, Light Hardness Tester

UNI EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

The American Road & Transportation Builders Association, Light Hardness Tester

AASHTO M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

AASHTO - American Association of State Highway and Transportation Officials, Light Hardness Tester

M 210-2009 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2006 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70M/R 70-2018 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete

PL-PKN, Light Hardness Tester

PN-EN ISO 22826-2021-08 E Destructive tests on welds in metallic materials -- Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
PN Z04015-09-1990 Air purity protection Tests for sulphur and its compounds Determination of carbon disulphide vapours in work places usjng spectrophotometric analyzer

Guangdong Provincial Standard of the People's Republic of China, Light Hardness Tester

DB44/T 1496.2-2016 Calibration methods for LED test instruments Part 2: Goniophotometric test systems

TH-TISI, Light Hardness Tester

TIS 15.6-1978 Portland cement.part 6: standard method of test for fineness of portland cement by air permeability apparatus