ZH
RU
ES

Electronic Hardness Tester

Electronic Hardness Tester, Total:500 items.

In the international standard classification, Electronic Hardness Tester involves: Pharmaceutics, Environmental testing, Paper and board, Analytical chemistry, Linear and angular measurements, Non-ferrous metals, Radiation measurements, Plastics, Vibrations, shock and vibration measurements, Testing of metals, Reinforced plastics, Rubber, Nuclear energy engineering, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Aerospace electric equipment and systems, Measurement of force, weight and pressure, Optics and optical measurements, Electronic tubes, Construction materials, Rubber and plastics products, Mechanical testing, Space systems and operations, Cereals, pulses and derived products, Wood-based panels, Textile machinery, Electrical equipment for working in special conditions, Mining and quarrying, Astronomy. Geodesy. Geography, Heat treatment, Medical equipment, Equipment for petroleum and natural gas industries, Optical equipment, Vocabularies, Geology. Meteorology. Hydrology, Lamps and related equipment, Coatings and related processes used in aerospace industry, Diagnostic, maintenance and test equipment, Paints and varnishes, Characteristics and design of machines, apparatus, equipment, Metrology and measurement in general, Rotating machinery, Welding, brazing and soldering, Surface treatment and coating, Textile fibres, Electrical engineering in general, Mining equipment, Standardization. General rules, Measurement of volume, mass, density, viscosity, Hydraulic energy engineering, Leather technology, Languages used in information technology, Semiconductor devices, Electrical and electronic testing, Open systems interconnection (OSI), Agricultural machines, implements and equipment, Non-destructive testing, Optoelectronics. Laser equipment, Installations in buildings, Construction technology, Resistors, Insulating materials, Iron and steel products, Aircraft and space vehicles in general, Road vehicle systems, Electronic components in general, Industrial automation systems, Sewing machines and other equipment for the clothing industry, On-board equipment and instruments, Components for electrical equipment, Education, Electrical wires and cables, Electromechanical components for electronic and telecommunications equipment, Shipbuilding and marine structures in general, Water quality, Radiation protection, IT terminal and other peripheral equipment, Hand-held tools, TESTING, Audio, video and audiovisual engineering, Components and accessories for telecommunications equipment, Power stations in general, Road engineering, Non-metalliferous minerals, Electric traction equipment.


Professional Standard - Machinery, Electronic Hardness Tester

  • JB/T 20104-2007 Hardness tester
  • JB/T 10038-1999 Electronic level meter
  • JB/T 8499-1996 Inductance scale micrometers for electron beam
  • JB/T 12203-2015 Electron Column Pneumatic Micrometer
  • JB/T 54289-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display height calipers
  • JB/T 54288-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display depth calipers
  • JB/T 6841-1993 Terminology of electronic optical instrument
  • JB/T 7707-1995 Test method for thickness of hard film of ion plating Ball milling method
  • JB/T 9298-1999 Generic specification of electronic power supply Transformers for use in instrument
  • JB/T 5463-1991 Inspection rules for electronic magnetometer
  • JB/T 5452.2-1991 Product Specifications for Electronic Components for Instruments and Meters SJ0303CP (SJ0303CD)
  • JB/T 5452.5-1991 Product Specifications for Electronic Components for Instruments and Meters SJ0306CP (SJ0306CD)
  • JB/T 5452.3-1991 Product Specification for Electronic Components for Instruments and Meters SJ0304CP (SJ0304CD)
  • JB/T 5452.4-1991 Product Specifications for Electronic Components for Instruments and Meters SJ0305CP (SJ0305CD)

工业和信息化部, Electronic Hardness Tester

Professional Standard - Light Industry, Electronic Hardness Tester

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electronic Hardness Tester

  • GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
  • GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
  • GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
  • GB/T 20920-2007 Electronic level meter
  • GB/T 36537-2018 Electronic theodolite
  • GB/T 7724-2008 Electronic Weighing Meter
  • GB/T 26095-2010 Electronic column micrometer
  • GB/T 22094-2008 Height measuring instrument with electronic digital display
  • GB/T 6833.3-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Electrostatic discharge susceptibility test
  • GB/T 11464-1989 Terminology for electronic measuring instruments
  • GB/T 11464-2013 Terminology for electronic measuring instruments
  • GB/T 2900.79-2008 Electrotechnical terminology.Electical and electronic measurements and measuring instruments.Part 3:Types of electrical measuring instruments
  • GB/T 6833.2-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Magnetic field susceptibility test
  • GB/T 6833.5-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Radiated susceptibility test
  • GB/T 6833.6-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Conducted susceptibility test
  • GB/T 6833.4-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Power line transient susceptibility test
  • GB/T 23246-2009 Conductivity-temperature-depth profiler
  • GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
  • GB 4793-1984 Safety requirements for electronic measuring apparatus
  • GB/T 11465-1989 Temperature profile for electronic measuring instruments
  • GB/T 6587-2012 General specification for electronic measuring instruments
  • GB 11465-1989 Thermal Profiles for Electronic Measuring Instruments
  • GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
  • GB/T 6587.5-1986 Shock tests for electronic measuring instruments
  • GB/T 6587.6-1986 Transportation tests for electronic measuring instruments
  • GB/T 11161-1989 Dial and scale of electrical instruments
  • GB/T 2900.90-2012 Electrotechnical terminology.Electrical and electronic measurements and measuring instruments.Part 4:Specific terms according to the type of instruments
  • GB/T 36244-2018 Inductively coupled plasma atomic emission spectrometer
  • GB/T 14987-1994 High permability alloys with high hardness and high electrical resistance
  • GB/T 8996-1988 Dimensions of sample planchets used in nuclear electronic instruments
  • GB/T 11463-1989 Reliability test for electronic measuring instruments
  • GB 11463-1989 Electronic Measuring Instrument Reliability Testing
  • GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
  • GB/T 6593-1996 Quality inspection provisions for electronic measuring instruments
  • GB/T 9393-1988 STZ3 type connector for electronic measurement instrument
  • GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments
  • GB/T 6587.7-1986 Basic safety tests for electronic measuring instruments
  • GB/T 15075-1994 Method for testing EPMA instrument
  • GB 9393-1988 STZ3 type connector for electronic measurement instrument
  • GB/T 2900.89-2012 Electrotechnical terminology.Electrical and electronic measurements and measuring instruments.Part 2:General terms relating to electrical measurements
  • GB/T 2900.77-2008 Electrotechnical terminology.Electrical and electronic measurements and measuring instruments.Part 1: General terms relating to measurements
  • GB/T 6098.2-1985 Test method for length of cotton fibres--Photoelectric length method
  • GB/T 25898-2010 Instrumented nanoindentation test.Indentation hardness and modulus of thin film

AT-ON, Electronic Hardness Tester

  • ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor
  • OENORM EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)

未注明发布机构, Electronic Hardness Tester

  • BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
  • SAE J211/1-201403 Instrumentation for Impact Test-Part 1-Electronic Instrumentation

SE-SIS, Electronic Hardness Tester

  • SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor
  • SIS SS IEC 482:1983 Nuclear instrumentation - Dimensions of electronic instrument modules (for nuclear electronic instruments)
  • SIS SS IEC 484:1981 Electrical measuring instruments — Indirect acting instruments
  • SIS SS IEC 577:1981 Nuclear instrumentation - lonizing radiation thickness meters
  • SIS SS 11 03 40-1983 Hardness test - Vickers test HV 0,2 to HV100- Direct verification of testing machines
  • SIS SS 11 03 37-1987 Metallic materials - Hardness test - Calibration of standardized blocks to be used for Rockwell Hardness testing machines. Scales A-B-C-D-E-F- G-H-K
  • SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
  • SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
  • SIS SS IEC 615:1983 Electronic measuring equipment - Terminology for microwave apparatus
  • SIS SS IEC 469:1988 Electronic measuring equipment — Pulse techniques andapparatus

National Metrological Technical Specifications of the People's Republic of China, Electronic Hardness Tester

Japanese Industrial Standards Committee (JISC), Electronic Hardness Tester

  • JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method
  • JIS B 7922:2017 Electronic Wet-bulb globe temperature (WBGT) index meter
  • JIS B 7910:1997 Electro-optical distance measuring instruments (EDM) -- Field procedures for determining accuracy
  • JIS C 1002:1975 Glossary of terms used in electronic measuring apparatus
  • JIS C 1802:1981 Electronic self-balancing recorders for industrial use
  • JIS B 7615:2013 Electronic measuring instruments.Electromagnetic environment test method
  • JIS F 8001:1976 Method of watertight testing for marine electric appliances
  • JIS B 3411:1992 Numerically controlled draughting machines -- Drawing test -- Part 1: Electromechanical plotters

Korean Agency for Technology and Standards (KATS), Electronic Hardness Tester

  • KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
  • KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS B 5247-2009 Electrical comparators
  • KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
  • KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
  • KS C 1100-1978 Glossary of terms used in electronic measuring apparatus
  • KS C 7619-1979(2017) Photometric measurement on mirror - condenser lamps for projector
  • KS B ISO 22826-2016(2021) Destructive tests on welds in metallic materials－Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
  • KS C 1100-1978(2021) Glossary of terms used in electronic measuring apparatus
  • KS B ISO 8322-8-2002(2017) Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m
  • KS B ISO 22826:2006 Destructive tests on welds in metallic materials-Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
  • KS B ISO 22826:2016 Destructive tests on welds in metallic materials－Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
  • KS B ISO 14271:2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • KS W 7016-1987 Electronic Equipment , Aerospace, General Specification for
  • KS B ISO 8322-8:2002 Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m
  • KS C 5116-2003 Fixed carbon composition resistors for use in electronic equipment
  • KS C 1100-1978(2016) Glossary of terms used in electronic measuring apparatus
  • KS C 1611-1982(2022) Electronic Self-Balancing Recorders for Industrial Use
  • KS B ISO 8322-8-2002(2022) Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m
  • KS B ISO 14271:2004 Vickers hardness testing of resistance spot, projection and seam welds(low load and microhardness)
  • KS C 1613-2009 Thermoelectric digital thermometer
  • KS C 2507-1980(2017) Electric contact material for electric communication equipment and apparatus
  • KS C 1611-1982 Electronic Self-Balancing Recorders for Industrial Use
  • KS C IEC 62053-31:2003 Electricity metering equipment(a.c.)－Particular requirements－Part 31：Pulse output devices for electromechanical and electronic meters (two wires only)
  • KS C 1614-2009 Resistance digital thermometer
  • KS C IEC 62534-2012(2017) Radiation protection instrumentation－Highly sensitive hand-held instruments for neutron detection of radioactive material

British Standards Institution (BSI), Electronic Hardness Tester

  • BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
  • BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
  • BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
  • BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • BS EN ISO 22826:2021 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
  • BS EN 16602-60-15:2014 Space product assurance. Radiation hardness assurance. EEE components
  • BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
  • PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
  • BS EN ISO 14271:2011 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • BS ISO 22826:2006 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
  • BS IEC 61501:2001 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
  • BS ISO 6123-1:2015 Rubber or plastics covered rollers. Specifications. Requirements for hardness
  • BS EN ISO 9015-1:2011 Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints
  • BS EN IEC 60987:2021 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
  • BS EN 62534:2015 Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material
  • BS EN 62533:2016 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
  • BS 7442-4.1:1992 Rubber or plastics covered rollers - Requirements - Specification for apparent hardness
  • BS 7442 Sec.4.1:1992 Rubber or plastics covered rollers. Requirements. Specification for apparent hardness
  • BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)

Shandong Provincial Standard of the People's Republic of China, Electronic Hardness Tester

American Society for Testing and Materials (ASTM), Electronic Hardness Tester

  • ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
  • ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
  • ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
  • ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
  • ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
  • ASTM E721-11 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
  • ASTM E721-16 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
  • ASTM E721-22 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
  • ASTM E2108-00 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM E720-23 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
  • ASTM D2821-09 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • ASTM D2821-00 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • ASTM D2821-00(2005) Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • ASTM D2821-00(2005)e1 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • ASTM D2821-19 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • ASTM E722-14 Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
  • ASTM E722-19 Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
  • ASTM E2108-05 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM C204-07 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • ASTM C204-17 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM E720-16 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
  • ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • ASTM B277-95(2001) Standard Test Method for Hardness of Electrical Contact Materials
  • ASTM B277-95 Standard Test Method for Hardness of Electrical Contact Materials
  • ASTM B277-95(2006) Standard Test Method for Hardness of Electrical Contact Materials
  • ASTM D668-99 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
  • ASTM D668-99(2004) Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation

Professional Standard - Traffic, Electronic Hardness Tester

National Metrological Verification Regulations of the People's Republic of China, Electronic Hardness Tester

Group Standards of the People's Republic of China, Electronic Hardness Tester

American National Standards Institute （ANSI), Electronic Hardness Tester

  • ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ANSI/ASTM D5650:1997 Test Method for Use of the Taber-Type Tester for Stiffness in the Expanded 0-10 Taber Stiffness Unit Range

European Committee for Standardization (CEN), Electronic Hardness Tester

  • EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor
  • EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot@ projection@ and seam welds
  • EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (Incorporating corrigendum April 2012)
  • EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)

German Institute for Standardization, Electronic Hardness Tester

  • DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
  • DIN ISO 48-9:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
  • DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
  • DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
  • DIN EN 61187:1995 Electrical and electronic measuring equipment - Documentation (IEC 61187:1993, modified); German version EN 61187:1994
  • DIN EN ISO 14271:2018-01 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017
  • DIN ISO 48-9:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
  • DIN 13114-1:1980 Medical instruments; scissors type Mayo without carbide inserts
  • DIN ISO 22826:2008 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
  • DIN EN ISO 22826:2020 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German and English version prEN ISO 22826:2020
  • DIN EN ISO 22826:2021-05 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German version EN ISO 22826:2021
  • DIN 43855:1983-10 Watthour meters; plates
  • DIN 50158-1:2008-07 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
  • DIN 13133-1:2005 Medical instruments - Uterine scissors, curved on flat, type Sims - Part 1: Without carbide inserts
  • DIN EN 16602-60-15:2014 Space product assurance - Radiation hardness assurance - EEE components; English version EN 16602-60-15:2014
  • DIN EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
  • DIN ISO 15472:2020-05 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
  • DIN 50158-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
  • DIN 50157-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 1: Test method
  • DIN EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection and seam welds (ISO 14271:2011); German version EN ISO 14271:2011
  • DIN 13134-1:1980 Medical instruments; uterine scissors, straight, type Sims without carbide inserts

AENOR, Electronic Hardness Tester

  • UNE 40225-2:1974 IN PERIODICAL CONTROLS OF THE ELECTRONIC EVENESS TESTER.
  • UNE 22542:1992 TESTER AND OHMMETERS FOR ELECTRIC SHOT-FIRING CIRCUITS.
  • UNE 40225-1:1974 IN WOOL. DETERMINATION OF SHORT TERM IRREGULARITY OF LINEAR DENSITY OF SILVERS, ROVING AND YARNS, BY MEANS OF AN ELECTRONIC EVENESS TESTER.

CL-INN, Electronic Hardness Tester

Defense Logistics Agency, Electronic Hardness Tester

International Organization for Standardization (ISO), Electronic Hardness Tester

  • ISO 18898:2016 Rubber - Calibration and verification of hardness testers
  • ISO 18898:2012 Rubber - Calibration and verification of hardness testers
  • ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
  • ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
  • ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
  • ISO 22826:2005 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
  • ISO 12857-3:1997 Optics and optical instruments - Geodetic instruments - Field procedures for determining accuracy - Part 3: Electro-optical distance meters (EDM instruments)
  • ISO 8322-8:1992 Building construction; measuring instruments; procedures for determining accuracy in use; part 8: electronic distance-measuring instruments up to 150 m
  • ISO 14271:2000 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
  • ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • ISO/TR 10201:1989 Aerospace — Standards for electronic instruments and systems

Professional Standard - Petroleum, Electronic Hardness Tester

International Electrotechnical Commission (IEC), Electronic Hardness Tester

  • IEC 60482:1975 Dimensions of electronic instrument modules (for nuclear electronic instruments)
  • IEC 60050-300-313:2001 Electrotechnical terminology-Electrical and electronic measurements and measuring instruments-Part 3:Types of electrical measuring instruments
  • IEC 60248:1984 Dimensions of planchets used in nuclear electronic instruments
  • IEC 60348:1978 Safety requirements for electronic measuring apparatus
  • IEC 61028:1990 Electrical measuring instruments - X-Y recorders
  • IEC 60987:2021 Nuclear power plants - Instrumentation and control important to safety - Hardware requirements
  • IEC 60278:1968 Documentation to be supplied with electronic measuring apparatus
  • IEC 60050-302:1983 International Electrotechnical Vocabulary. Part 302 : Chapter 302: Electrical measuring instruments

Professional Standard - Electron, Electronic Hardness Tester

  • SJ 1152-1977 Specification for electronic temperature meters for cereal grains
  • SJ 20777-2000 Electronic design hardware description language VHDL
  • SJ/T 2089-2015 Type designation for electronic measuring instruments
  • SJ/T 2089-1982 Type designation for electronic measuring instruments
  • SJ/T 2089-2001 Type designation for electronic measuring instruments
  • SJ/Z 9077-1987 Accompanying documents of electronic measuring instrument

HU-MSZT, Electronic Hardness Tester

RU-GOST R, Electronic Hardness Tester

  • GOST 5365-1983 Electrical measuring instruments. Dials and scales. General technical requirements
  • GOST 20271.1-1991 Microwave electronic devices. Methods of measuring electrical parameters
  • GOST 5233-1989 Paint materials. Method for determination of coating hardness pendulum instrument
  • GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
  • GOST 9506.3-1974 Brushes for electrical machines. The method for determination of hardness
  • GOST R ISO 22826-2012 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness test)
  • GOST R 51774-2001 Electronic tacheometers. General specification
  • GOST 29283-1992 Semiconductor devices. Discrete devices and integrated circuits. Part 5. Optoelectronic devices
  • GOST 2182-1975 Electric vacuum devices. Anode and filament voltage
  • GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
  • GOST 23594-1979 Mounting of electric radioelectronic equipment and instruments. Marking
  • GOST 18096-1987 Mica details for electronic devices. Specifications

CZ-CSN, Electronic Hardness Tester

  • CSN 25 0264-1976 Diamond indenters for Vickers hardness testing machines
  • CSN 25 0270-1974 Verification of Rockwell superficial N and T scale hardness testing machines
  • CSN 25 0270-1985 Rockwell hardness testing machines, scales N and I. Technical requirements. Methods of verification.
  • CSN 35 6506-1983 Electronic measuring instruments Documentation supplied with electronic measuring
  • CSN 36 7001-1967 Reliability tests of eleotronic instrumenta
  • CSN 25 0260-1967 Verification of standardized blocks to be_ used for Rockwell B, C & A settle hardness testing machines
  • CSN 25 0271-1974 Calibration of standardized' blocks to be used for Rpckwell superficial N and T ?cale hardness testing machines
  • CSN 35 6533-1986 Electronic measuring instruments. DC stabilized power supply.
  • CSN 35 6505-1990 Electronic measuring instruments. General technical conditions
  • CSN 35 6508-1983 Electronic measuring instruments. General technical requirements
  • CSN IEC 248:1994 Dimension of planchets used in nuclear electronic instruments
  • CSN 35 6535-1983 Electronic measuring instruments. Succesive process spectra analyzers. Nomenclature of pnrameters
  • CSN 35 6509-1979 Electronic measuring Instruments, specifying and representation of errors

American Society of Mechanical Engineers (ASME), Electronic Hardness Tester

Taiwan Provincial Standard of the People's Republic of China, Electronic Hardness Tester

Association Francaise de Normalisation, Electronic Hardness Tester

  • NF E11-302:1984 Measuring instruments. Electronic levels.
  • NF EN ISO 22826:2021 Essais destructifs des soudures sur matériaux métalliques - Essais de dureté sur joints étroits soudés par faisceau d'électrons et faisceau laser (Essais de dureté Vickers et Knoop)
  • NF B56-017:1980 Panneaux fibragglo - Détermination de la teneur en ions chlorure
  • NF C19-200*NF EN IEC 60987:2021 Nuclear power plants - Instrumentation and control important to safety - Hardware requirements
  • NF E11-064:1990 Electronic comparators. Electronic conditioners. Technical data sheet.
  • NF E11-060:1990 Electronic comparators. Terminology. Definitions.
  • NF ISO 920:2018 Laine - Détermination de la longueur de barbe et de la hauteur des fibres sur appareil à peignes
  • NF A89-209*NF EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
  • NF A89-568*NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • NF C42-695:1985 Electronic measuring instruments. Expression of the properties of logic analyzers.
  • NF E11-068:1992 Electronic compartors. Specifications. Test methods.
  • NF C31-122:1980 Wires for electrical machinery and apparatus. Round bare 3/4 hard aluminium wire. Characteristics.
  • NF EN ISO 14271:2017 Soudage par résistance - Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette
  • NF T01-036:1980 Molecular absorption spectrophotometry. Methods of inspection of apparatus.
  • NF A89-568:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds.
  • NF C33-400:2001 Insulated cables for power systems - Energy-meter instrument cables

RO-ASRO, Electronic Hardness Tester

  • STAS 6419-1970 Elcclrical moasurinfi apparalus DIA1.S AND GRADUATlin SCALES
  • STAS 10327/2-1987 ELECTRONIC MEASURING APPARATUS Electro-safety requirements
  • STAS 10327-1976 ELECTRONIC MEASURING APARATUS Safety requirements
  • STAS 7105-1988 YARNS AND SEMI-MANUFAC- TURED TEXTILE PRODUCTS Linear density irregularity determina- tion by means of electronic evenness tester
  • STAS SR CEI 359+A1-1994 Expression of the performance of electrical and electronic measuring equipment
  • STAS 11071/21-1990 Hierarchy of measuring instruments. Block diagram of hierarchy of measuring instrument for thermal neutrons flux density
  • STAS 10327/1-1987 ELECTRONIC MEASURING APPARATUS General safety requirements
  • STAS 11190/1-1980 Electronic measuring instruments STABILIZED POWER SUPPLIES, FOR MEASURING Terminology
  • STAS SR ISO 8322-8:1995 Bullding construction - Measuring instrumenta - Procedures for determining accuracy in use. Part 8: Electronic distance measuring instruments up to 150 m.

Indonesia Standards, Electronic Hardness Tester

  • SNI 03-1751-1990 Weak parts, organic substance, sand hardness, crushed stoned hardness, Determination
  • SNI 03-1756-1990 Sand for mixture and concrete, Determination of hardness
  • SNI 04-0857-1989 Insulation materials for electrical machinery and apparatus, Classification
  • SNI 04-3866-1995 Rules for pantographs of electric rolling stocks

Jilin Provincial Standard of the People's Republic of China, Electronic Hardness Tester

Professional Standard - Grain, Electronic Hardness Tester

  • LS/T 1215-2008 Technical specification for calibrating wheat hardness index tester
  • LS/T 3704-2007 Technical requirements and test method for wheat hardness index tester

Professional Standard - Textile, Electronic Hardness Tester

Society of Automotive Engineers (SAE), Electronic Hardness Tester

Standard Association of Australia （SAA）, Electronic Hardness Tester

  • AS 6002:1999 Domestic electric meter enclosures
  • AS 1852.303:1988 International electrotechnical vocabulary - Electronic measuring instruments
  • AS 3547.2:2023 Breath alcohol electronic testing devices for personal use

Professional Standard - Military and Civilian Products, Electronic Hardness Tester

GOSTR, Electronic Hardness Tester

  • GOST R 58867-2020 Instrument rolling bearings. Methods of measuring hardness parts of bearings
  • GOST ISO 22826-2017 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

Lithuanian Standards Office , Electronic Hardness Tester

  • LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
  • LST EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
  • LST EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)

Association of German Mechanical Engineers, Electronic Hardness Tester

Professional Standard - Nuclear Industry, Electronic Hardness Tester

CU-NC, Electronic Hardness Tester

  • NC 41-46-1987 Leather. Determination of Starching Flexural Strength by Means of Bally Flexometer Testing Method

Danish Standards Foundation, Electronic Hardness Tester

  • DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
  • DS/EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • DS/EN ISO 14271/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • DS/EN ISO 22826:2021 Destructive tests on welds in metallic materials – Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
  • DS/EN IEC 60987:2021 Nuclear power plants – Instrumentation and control important to safety – Hardware requirements
  • DS/IEC 348:1981 Safety requirements for electronic measuring apparatus

BR-ABNT, Electronic Hardness Tester

Aeronautical Radio Inc., Electronic Hardness Tester

CO-ICONTEC, Electronic Hardness Tester

SAE - SAE International, Electronic Hardness Tester

BELST, Electronic Hardness Tester

Inner Mongolia Provincial Standard of the People's Republic of China, Electronic Hardness Tester

  • DB15/T 1341-2018 Specification for calibration of electronic scanner for carded cashmere hand row length chart
  • DB15/T 981-2016 Carded cashmere hand row length test method drawing board electronic scanner method

Professional Standard - Aviation, Electronic Hardness Tester

  • HB 7063-1994 Aluminum alloy conductivity and hardness
  • HB 8644-2022 Design requirements for airborne electronic hardware modules of civil aircraft

National Electrical Manufacturers Association（NEMA), Electronic Hardness Tester

United States Navy, Electronic Hardness Tester

Professional Standard - Electricity, Electronic Hardness Tester

Professional Standard - Geology, Electronic Hardness Tester

  • DZ 43-1986 DDC-2B Electronic Automatic Compensator

Professional Standard - Medicine, Electronic Hardness Tester

  • YY 0016-1993 Low Frequency Electronic Pulse Therapy Apparatus

Professional Standard - Education, Electronic Hardness Tester

Professional Standard - Agriculture, Electronic Hardness Tester

CEN - European Committee for Standardization, Electronic Hardness Tester

  • EN ISO 14271:2001 Vickers Hardness Testing of Resistance Spot@ Projection and Seam Welds (Low Load and Microhardness)

KR-KS, Electronic Hardness Tester

  • KS B ISO 22826-2016 Destructive tests on welds in metallic materials－Hardness testing of narrow joints welded by laser and electron beam(Vickers and Knoop hardness tests)
  • KS B ISO 14271-2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • KS D ISO 15472-2003(2023)

ES-UNE, Electronic Hardness Tester

  • UNE-EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
  • UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
  • UNE-EN IEC 60987:2021 Nuclear power plants - Instrumentation and control important to safety - Hardware requirements (Endorsed by Asociación Española de Normalización in October of 2021.)

Tianjin Provincial Standard of the People's Republic of China, Electronic Hardness Tester

  • DB12/T 371-2018 Compilation of product standards for electronic information instruments and meters
  • DB12/T 371-2008 General specification for writing electronic information instrumentation product standards

Professional Standard - Water Conservancy, Electronic Hardness Tester

  • SL 275-2014 Field test methods for nuclear density-moisture gauges.Part 2: Field test methods for nuclear depth density-moisture probes
  • SL 275-2001 Field test methods for nuclear density-moisture gauges
  • SL 275.1-2001(条文说明) Field test methods for nuclear surface density-moisture gauges(explanation)
  • SL 275.1-2001 Field test methods for nuclear surface density-moisture gauges
  • SL 275.2-2001(条文说明) Field test methods for nuclear depth density-moisture probes(explanation)
  • SL 275.2-2001 Field test methods for nuclear depth density-moisture probes

水利部, Electronic Hardness Tester

  • SL/T 275-2014 Nuclear moisture-densitometer field test procedures

国家市场监督管理总局、中国国家标准化管理委员会, Electronic Hardness Tester

  • GB/T 40826-2021 Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method

Professional Standard - Aerospace, Electronic Hardness Tester

  • QJ 2245-1992 Anti-static requirements for electronic instruments and equipment

IT-UNI, Electronic Hardness Tester

  • UNI EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)

YU-JUS, Electronic Hardness Tester

  • JUS L.G7.003-1981 Saffety reguirements for electronic measuring apparatus
  • JUS L.G7.001-1989 Expression of the functional performance of electrical and electronic measuring eguiptoent

U.S. Air Force, Electronic Hardness Tester

European Committee for Electrotechnical Standardization（CENELEC）, Electronic Hardness Tester

  • HD 312-1977 Documentation to Be Supplied with Electronic Measuring Apparatus
  • EN 61028:1995 Electrical Measuring Instruments - X-Y Recorders
  • EN IEC 60987:2021 Nuclear power plants - Instrumentation and control important to safety - Hardware requirements
  • HD 326-1976 Electrical Measuring Instruments Utilizing Radio- Active Sources

U.S. Military Regulations and Norms, Electronic Hardness Tester

国家能源局, Electronic Hardness Tester

  • SY/T 6587-2021 Calibration method of electronic well inclination instrument

Military Standard of the People's Republic of China-General Armament Department, Electronic Hardness Tester

  • GJB 9133-2017 Military electronic test instrument terminology
  • GJB 2894-1997 Aluminum alloy conductivity and hardness requirements
  • GJB 6294-2008 General specification for military electronic-sensor radiosondes
  • GJB 5073-2004 Calibration regulations for full-station electronic speed tester

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Electronic Hardness Tester

  • GB/T 33886-2017 Non-destructive testing instruments—Industrial electronic endoscopic detector
  • GB/T 35158-2017 Verification method for Auger electron spectrometers(AES)
  • GB/T 34917-2017 Determination of gelation degree of unplasticized poly(vinyl chloride)(PVC-U) products—Torque rheometer method

PL-PKN, Electronic Hardness Tester

  • PN-EN ISO 22826-2021-08 E Destructive tests on welds in metallic materials -- Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
  • PN T06500-01-1986 Electronic measuring instruments General resolutions
  • PN T06500-02-1985 Electronic measuring instruments Terms and definitions

US-RTCA, Electronic Hardness Tester

IPC - Association Connecting Electronics Industries, Electronic Hardness Tester

  • IPC J-STD-001CS-2004 Space Applications Electronic Hardware Addendum to Requirements for Soldered Electrical and Electronic Assemblies
  • IPC J-STD-001DS-2006 Space Applications Electronic Hardware Addendum to J-STD-001D Requirements for Soldered Electrical and Electronic Assemblies
  • IPC J-STD-001FS CHINESE-2015 Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies
  • IPC J-STD-001ES-2010 Space Applications Electronic Hardware Addendum to IPC J-STD-001E Requirements for Soldered Electrical and Electronic Assemblies
  • IPC J-STD-001FS-2015 Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies

BE-NBN, Electronic Hardness Tester

ES-AENOR, Electronic Hardness Tester

North Atlantic Treaty Organization Standards Agency, Electronic Hardness Tester

  • STANAG 7116-2008 VERIFICATION METHODOLOGY FOR ELECTROMAGNETIC HARDNESS OF AIRCRAFT

TR-TSE, Electronic Hardness Tester

  • TS 2418-1976 SAFFTY REOUIREMENTS FOR ELECTRONIC MEASURING APPARATUS

IN-BIS, Electronic Hardness Tester

Aerospace Industries Association, Electronic Hardness Tester

AIA/NAS - Aerospace Industries Association of America Inc., Electronic Hardness Tester

  • NAS880-1982 Interface - Optical Tooling Electronic Level

能源部, Electronic Hardness Tester

  • SY 5472-1992 Electronic gyro inclinometer measurement procedures

教育部, Electronic Hardness Tester

  • JY/T 0213-2022 Environmental testing of non-electrical electronic instruments for teaching purposes

Professional Standard - Meteorology, Electronic Hardness Tester

Professional Standard - Construction Industry, Electronic Hardness Tester

SG-SPRING SG, Electronic Hardness Tester

  • SS 78 Pt.B2-1992 Testing Concrete Part B2 : Recommendations For Surface Hardness Testing By Rebound Hammer

Professional Standard - Energy, Electronic Hardness Tester

  • NB/T 20148-2012 Resistance temperature detectors important to safety in nuclear power plants

  Soil Hardness Tester, Electronic Hardness Tester, Micro hardness tester, High temperature hardness tester, Electronic hardness machine, Hardness tester, Soil Hardness Tester, Micro hardness tester, Northeast electronic hardness machine, Northeast Electronic Hardness Tester, Precision Hardness Tester, Light Hardness Tester, Hardness tester manufacturing, Tablet Hardness Tester, hardness tester tablet, Paint film hardness tester, Tablet Hardness Tester, Hardness Tester, Hardness Tester, Scratch Hardness Tester.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved