ZH

RU

ES

Peak area + content

Peak area + content, Total:498 items.

In the international standard classification, Peak area + content involves: Products of the chemical industry, Testing of metals, Products of the textile industry, Metrology and measurement in general, Lubricants, industrial oils and related products, Leather technology, Analytical chemistry, Coatings and related processes used in aerospace industry, Measurement of volume, mass, density, viscosity, Iron and steel products, Medical equipment, Radiation measurements, Radiation protection, Measurement of fluid flow, Linear and angular measurements, Construction industry, Buildings, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Astronomy. Geodesy. Geography, Geology. Meteorology. Hydrology, Fibre optic communications, Electrical wires and cables, Road vehicles in general, Materials for aerospace construction, Packaging materials and accessories, Tobacco, tobacco products and related equipment, Reinforced plastics, Paper and board, Wood-based panels, Soil quality. Pedology, Coals, Non-ferrous metals, Road engineering, Water quality, Textile fibres, Rubber and plastics products, Protection of and in buildings, Particle size analysis. Sieving, Home textiles. Linen, Non-textile floor coverings, Pipeline components and pipelines, Metalliferous minerals, Inorganic chemicals, Non-metalliferous minerals, Cereals, pulses and derived products, Insulating materials, Materials for the reinforcement of composites, Nuclear energy engineering, Installations in buildings, Equipment for the chemical industry, Services, Farming and forestry, Fuels, Meat, meat products and other animal produce, Surface treatment and coating, Thermodynamics and temperature measurements, Adhesives, Elements of buildings, Vocabularies.


International Organization for Standardization (ISO), Peak area + content

  • ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
  • ISO 11646:2014 Leather - Measurement of area
  • ISO 11646:2014 | IULTCS/IUP 32 Leather — Measurement of area
  • ISO 11646:1993 | IULTCS/IUP 32 Leather — Measurement of area
  • ISO 11646:1993 Leather; measurement of area
  • ISO 748:1979 Liquid flow measurement in open channels; Velocity-area methods
  • ISO 1070:1973 Liquid flow measurement in open channels — Slope-area method
  • ISO 748:1973 Title missing - Legacy paper document
  • ISO 1070:1992 Liquid flow measurement in open channels; slope-area method
  • ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • ISO 12195:1995 Threshed tobacco - Determination of residual stem content
  • ISO 9864:1990 Geotextiles; determination of mass per unit area
  • ISO 12169:1996 Nickel oxide - Determination of nickel content - Electrolytic deposition method
  • ISO 1070:1992/Amd 1:1997 Liquid flow measurement in open channels — Slope-area method — Amendment 1
  • ISO 1070:2018 Hydrometry — Slope-area method
  • ISO 3354:1975 Measurement of clean water flow in closed conduits — Velocity-area method using current-meters
  • ISO 2120:1972 Liquid chlorine for industrial use; Determination of the content of chlorine by volume in the vaporized product
  • ISO 23997:2007 Resilient floor coverings - Determination of mass per unit area
  • ISO 3374:1980 Textile glass — Glass mats — Determination of mass per unit area
  • ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area
  • ISO/TR 7178:1983 Liquid flow measurement in open channels; Velocity-area methods; Investigation of total error

British Standards Institution (BSI), Peak area + content

  • BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
  • BS EN ISO 11646:1998 Leather - Measurement of area
  • BS EN ISO 11646:2014 Leather. Measurement of area
  • BS EN ISO 25178-600:2019 Geometrical product specifications (GPS). Surface texture: Areal - Metrological characteristics for areal topography measuring methods
  • BS ISO 1070:2018 Hydrometry. Slope-area method
  • 18/30356778 DC BS EN 60580. Medical electrical equipment. Dose area product meters
  • BS EN IEC 60580:2020 Tracked Changes. Medical electrical equipment. Dose area product meters
  • BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • BS EN ISO 2286-2:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
  • BS 3680-5:1992 Measurement of liquid flow in open channels - Slope area method of estimation
  • BS EN ISO 10352:2020 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
  • BS EN 2331:1993 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area
  • PD IEC TR 62284:2003 Effective area measurements of single-mode optical fibres. Guidance
  • 19/30336188 DC BS EN ISO 10352. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
  • BS 3680 Pt.5:1992 Measurement of liquid flow in open channels. Slope area method of estimation
  • BS EN 2557:1997 Carbon fibre preimpregnates - Determination of mass per unit area
  • ISO 9073-1:2023 Nowovens. Test methods - Determination of mass per unit area
  • BS EN 15221-6:2011 Facility management. Area and space measurement in facility management
  • BS EN ISO 23997:2012 Resilient floor coverings. Determination of mass per unit area
  • 20/30404177 DC BS EN ISO 25178-700. Geometrical product specifications (GPS). Surface texture: Areal. Part 700. Calibration, adjustment and verification of areal topography measuring instruments
  • BS EN ISO 21415-2:2008 Wheat and wheat flour. Gluten content. Determination of wet gluten by mechanical means
  • BS EN 951:1999 Door leaves - Method for measurement of height, width, thickness and squareness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Peak area + content

  • GB/T 13305-2008 Micrographic method for method determining area content of the α-phases in stainless steels
  • GB/T 13305-1991 Austenitic stainless steels.Determination of area content of the alpha-phase.Micrographic method using standard diagrams
  • GB/T 20012-2005 Medical electrical equipment.Dose area product meters
  • GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels
  • GB/T 3365-2008 Carbon fiber reinforced plastics.Determination of void content and fiber volume content
  • GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
  • GB/T 13762-1992 Geotextiles--Determination of mass per unit area
  • GB/T 31729-2015 Test method for mass per unit area of plastic film
  • GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
  • GB/T 3366-1996 Test method for fiber volume content of carbon fiber reinforced plastics
  • GB/T 4669-1995 Textiles--Woven fabrics--Determination of mass per unit length and mass per unit area
  • GB/T 11847-2008 Determination of specific surface area of uranium dioxide power by BET capacity method

European Committee for Standardization (CEN), Peak area + content

  • HD 379 S1-1979 Area exposure product meter
  • CEN EN ISO 11646:1998 Leather - Measurement of Area ISO 11646:1993
  • EN ISO 11646:2014 Leather - Measurement of Area
  • EN ISO 11646:1998 Leather - Measurement of Area ISO 11646:1993
  • EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
  • EN ISO 10693:2014 Soil quality - Determination of carbonate content - Volumetric method
  • prEN 672-1992 Cork floorcoverings; determination of mass per unit volume
  • EN ISO 23997:2012 Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007)
  • prEN 718-1992 Resilient floorcoverings; determination of mass per unit area of a reinforcement or a backing
  • prEN 984-1992 Determination of the mass per unit area of the use surface of needled floorcoverings
  • EN ISO 2286-2:1998 Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass Per Unit Area, Mass Per Unit Area of Coating and Mass Per Unit Area of Substrate ISO 2286-2:1998
  • prEN 430-1990 Resilient floorcoverings; determination of mass per unit area
  • EN 430:1994 Resilient Floor Coverings - Determination of Mass per Unit Area
  • EN ISO 21415-2:2015 Wheat and wheat flour - Gluten content Part 2: Determination of wet gluten and gluten index by mechanical means
  • EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area

Professional Standard - Textile, Peak area + content

  • FZ/T 01033-1993 Determination of the mass per unit area and the amount of pile (cover) of pile fabrics
  • FZ/T 01033-2012 Test method of mass per unit area and pile percent of pile fabric
  • FZ/T 20008-2015 Test for the mass per unit area of wool fabric
  • FZ/T 20008-2006 Test for the mass per unit area of wool fabric
  • FZ/T 20008-1993 Determination of weight per unit area of woolen fabrics
  • FZ/T 60003-1991 Determination of mass per unit area of nonwoven fabrics
  • FZ/T 60003-1993 Determination of mass per unit area of nonwoven fabrics
  • FZ/T 60046-2016 Determination of mass per unit area of towel product
  • FZ/T 10026-2022 Test method for dry quality of unbleached cloth per unit area without pulp

Korean Agency for Technology and Standards (KATS), Peak area + content

American Society for Testing and Materials (ASTM), Peak area + content

  • ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D3776-09 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D3776/D3776M-20 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D5261-92(2009) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • ASTM D5261-92(2003) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • ASTM D3776/D3776M-09ae2 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D3776/D3776M-09a(2013) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D3776/D3776M-09a(2017) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D4381-84(2006) Standard Test Method for Sand Content by Volume of Bentonitic Slurries
  • ASTM D4381/D4381M-22 Standard Test Method for Sand Content by Volume of Construction Slurries
  • ASTM D3776/D3776M-09ae1 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D3776/D3776M-09a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
  • ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
  • ASTM D3776-07 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D5261-10 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • ASTM D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • ASTM D6566-00(2006) Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
  • ASTM D5261-92(1996) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
  • ASTM D3776-96(2002) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D3776-96 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • ASTM D6566-00 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
  • ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
  • ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
  • ASTM D6566-18(2023) Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
  • ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
  • ASTM D6566-14 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
  • ASTM D4381-06 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
  • ASTM D4381/D4381M-12 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
  • ASTM E1836/E1836M-09(2016) Standard Practice for Building Floor Area Measurements for Facility Management
  • ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
  • ASTM D8-21 Standard Terminology Relating to Materials for Roads and Pavements
  • ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
  • ASTM D899-00(2018) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
  • ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
  • ASTM D8-16a Standard Terminology Relating to Materials for Roads and Pavements

HU-MSZT, Peak area + content

Danish Standards Foundation, Peak area + content

  • DS/EN ISO 11646:1999 Leather - Measurement of area
  • DS/EN 60580:2001 Medical electrical equipment - Dose area product meters
  • DS 13000:2007 Measurement of buildings, concepts of area and volume
  • DS 13000:2021 Measurement of buildings, concepts of area and volume – CORRECTIONS 1
  • DS/EN ISO 2286-2:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • DS/EN 13:1976 Determination of lead content of gasoline. Volumetric chromate method
  • DS/EN 2559:1998 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
  • DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/EN ISO 23997:2012 Resilient floor coverings - Determination of mass per unit area

German Institute for Standardization, Peak area + content

  • DIN EN ISO 11646:2014-07 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
  • DIN EN IEC 60580:2021-07 Medical electrical equipment - Dose area product meters (IEC 60580:2019); German version EN IEC 60580:2020
  • DIN EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
  • DIN EN ISO 11646:1998 Leather - Measurement of area (ISO 11646:1993); German version EN ISO 11646:1998
  • DIN EN 60580:2001 Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000
  • DIN EN ISO 25178-600:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019); German version EN ISO 25178-600:2019
  • DIN EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993
  • DIN EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1
  • DIN EN ISO 10352:2020-12 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
  • DIN EN ISO 10693:2014 Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995); German version EN ISO 10693:2014
  • DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
  • DIN 1229:1996 Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas
  • DIN EN ISO 2286-2:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-...
  • DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
  • DIN EN ISO 23997:2012 Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007); German version EN ISO 23997:2012
  • DIN EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
  • DIN EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-2:2
  • DIN EN 984:2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings; German version EN 984:2001
  • DIN EN ISO 25178-70:2014-06 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014
  • DIN EN ISO 23997:2012-04 Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007); German version EN ISO 23997:2012
  • DIN EN 13267:2001 Surface active agents - Determination of water content - Karl Fischer method; German version EN 13267:2001
  • DIN ISO 16586:2012 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
  • DIN EN 2331:1993-04 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993
  • DIN EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
  • DIN EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998
  • DIN EN 2559/A1:2023-08 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022/prA1:2023 / Note: Date of issue 2023-07-07*Intended as an amend...
  • DIN EN 2559:2023-07 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022 / Note: To be amended by DIN EN 2559/A1 (2023-08) (in preparati...
  • DIN EN ISO 2286-3:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016); German version EN ISO 2286-3:2016

RU-GOST R, Peak area + content

National Metrological Technical Specifications of the People's Republic of China, Peak area + content

  • JJF 1479-2014 Calibration Specification for Dose Area Product Meters

国家市场监督管理总局、中国国家标准化管理委员会, Peak area + content

  • GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging

Society of Automotive Engineers (SAE), Peak area + content

SAE - SAE International, Peak area + content

ES-UNE, Peak area + content

  • UNE-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
  • UNE-EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
  • UNE-EN 2559:2022 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area (Endorsed by Asociación Española de Normalización in January of 2023.)

Association Francaise de Normalisation, Peak area + content

  • NF G52-021:2000 Leather - Measurement of area.
  • NF G52-021*NF EN ISO 11646:2014 Leather - Measurement of area
  • NF C74-103*NF EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
  • NF P84-514:1994 Geomembranes. Determination of mass per unit area.
  • NF EN 16074:2019 Peintures et vernis - Détermination de la teneur en matière non volatile et du rendement superficiel spécifique de revêtements pour prélaquage
  • NF C74-103*NF EN 60580:2004 Medical electrical equipment - Dose area product meters
  • NF X10-331:1992 Liquid flow measurement in open channels. Slope-area method.
  • NF G37-102-2*NF EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2 : methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • NF B56-013:1980 Panneaux fibragglo - Détermination de la masse volumique et de la masse surfacique
  • NF T57-511*NF EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
  • NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
  • NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
  • NF G35-045:1995 DETERMINATION OF THE MASS PER UNIT AREA OF THE USE SURFACE OF NEEDLED FLOOR COVERINGS. (EUROPEAN STANDARD EN 984).
  • NF A06-751:1975 Chemical analysis of copper alloys. Volumetric determination of total chromium.
  • NF T20-414:1975 Sodium carbonate for industrial use . Determination of total soluble alkalinity. Volumetric method.
  • NF ISO 9030:2000 Pétrole brut - Détermination de la teneur en eau et en sédiments - Méthode par centrifugation
  • NF ISO 2005:2015 Latex concentré de caoutchouc naturel - Détermination de la teneur en sédiment
  • NF V03-730-4*NF EN ISO 21415-4:2007 Wheat and wheat flour - Gluten content - Part 4 : determination of dry gluten content from wet gluten by a rapid drying method.
  • NF P62-107*NF EN ISO 23997:2012 Resilient floor coverings - Determination of mass per unit area
  • NF P62-107:1994 Resilient floor coverings. Determination of mass per unit area.
  • NF A10-151:1986 Chemical analysis of ferro-silicon-Determination of silicon content-Volumetric method
  • NF ISO 16586:2003 Qualité du sol - Détermination de la teneur en eau volumique du sol à partir de la masse volumique apparente sèche connue - Méthode gravimétrique
  • NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
  • NF G35-045*NF EN 984:2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings.
  • NF A06-125:1967 Chemical analysis of iron ores. Volumetric determination of total iron.
  • NF M07-014:1974 LIQUID FUELS. DETERMINATION OF LEAD CONTENT OF GASOLINE. VOLUMETRIC CHROMATE METHOD. (EUROPEAN STANDARD EN 13).
  • NF EN ISO 3735:1999 Pétrole brut et fuel-oils - Détermination de la teneur en sédiments - Méthode par extraction.
  • NF EN ISO 25178-600:2019 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 600 : caractéristiques métrologiques pour les méthodes de mesure par topographie surfacique
  • NF EN ISO 25178-70:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 70 : mesures matérialisées
  • NF G07-170*NF EN 12127:1998 Textiles. Fabrics. Determination of mass per unit area using small samples.

National Metrological Verification Regulations of the People's Republic of China, Peak area + content

  • JJG 660-2006 Pattern Area Measuring Instruments
  • JJG 660-1990 Verification Regulation of Patten Area Measuring Instruments
  • JJG 413-1999 Verification Regulation of Leather Area Measuring Machine
  • JJG 413-2009 Verification Regulation of Leather Area Measuring Machine
  • JJG 835-1993 Verification Regulation of Flowrate Facilities by Velocity-Area Method

工业和信息化部, Peak area + content

  • QB/T 5089-2017 Measuring leather area
  • HG/T 3050.2-2020 Determination of properties of whole rolls of rubber or plastic coated fabrics Part 2: Methods for determination of total mass per unit area, coating mass per unit area and mass of base fabric per unit area

CL-INN, Peak area + content

International Electrotechnical Commission (IEC), Peak area + content

  • IEC 60580:2019 RLV Medical electrical equipment - Dose area product meters
  • IEC 60580:2000 Medical electrical equipment – Dose area product meters (Edition 2.0)
  • IEC 60580:2003 Medical electrical equipment - Dose area product meters
  • IEC TR 62284:2003 Effective area measurements of single-mode optical fibres - Guidance
  • IEC 60580:2019 Medical electrical equipment - Dose area product meters

European Committee for Electrotechnical Standardization(CENELEC), Peak area + content

AENOR, Peak area + content

  • UNE-EN 60580:2001 Medical electrical equipment - Dose area product meters.
  • UNE 59531:2014 Footwear. Area measurements in soles
  • UNE-EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014)
  • UNE 35053-1:1985 FERROVANADIUM. DETERMINATION OF VANADIUM CONTENT. VOLUMETRIC METHOD
  • UNE 7331:1975 DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.
  • UNE-EN 2559:1997 AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA.
  • UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
  • UNE 35059-1:1990 FERROCHROMIUM AND FERROSILICOCHROMIUM. DETERMINATION OF CHROMIUM CONTENT. VOLUMETRIC METHOD
  • UNE 40339:2002 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area.
  • UNE 35028-1:1986 FERROALLOYS. DETRMINATION OF SULPHUR CONTENT. PART 1: VOLUMETRIC METHOD
  • UNE-EN 12127:1998 TEXTILES. FABRICS. DETERMINATION OF MASS PER UNIT AREA USING SMALL SAMPLES.
  • UNE 40243:1974 CARPETS. DETERMINATION OF MASS OF TOTAL PILE YARN PER UNIT AREA.
  • UNE 55611:1981 SURFACE ACTIVE AGENTS. SODIUM HYDROXIDE FOR USE AS RAW-MATERIAL IN DETERGENT FORMULATIONS. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD

Standard Association of Australia (SAA), Peak area + content

  • AS/NZS 4957:2002 Medical electrical equipment - Dose area product meters
  • AS 4878.3:2001 Methods of test for coated fabrics - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • AS 3778.3.3:2022 Measurement of water flow in open channels, Part 3.3: Velocity-area methods — Measurement by slope-area method (ISO 1070:2018, IDT)
  • AS 3778.3.2:1990 Measurement of water flow in open channels - Velocity-area methods - Measurement by moving-boat method
  • AS 1580.301.2:1990(R2013)
  • AS 3778.3.2:1990(R2009)
  • AS 3778.3.5:1990 Measurement of water flow in open channels - Velocity-area methods - Investigation of total error

SE-SIS, Peak area + content

KR-KS, Peak area + content

  • KS M ISO 2286-2-2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
  • KS B ISO 748-2015 Measurement of liquid flow in open channels-Velocity-area methods
  • KS M ISO 11605-2003 Paper and board-Calibration of variable-area flowmeters
  • KS C IEC 60580-2018 Medical electrical equipment — Dose area product meters
  • KS M ISO 1552-2012 Liquid chlorine for industrial use-Method of sampling(for determining only the volumetric chlorine content)
  • KS F ISO 16979-2020 Wood-based panels — Determination of moisture content

Lithuanian Standards Office , Peak area + content

  • LST EN ISO 11646:2001 Leather - Measurement of area (ISO 11646:1993)
  • LST EN 60580-2002 Medical electrical equipment. Dose area product meters (IEC 60580:2000)
  • LST EN 2559-2001 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
  • LST EN ISO 2286-2:2000 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
  • LST EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
  • LST ISO 3801:1998 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
  • LST 1775-2002 Fish and fishery products. Determination of chloride (salt) content. Volumetric method

Beijing Provincial Standard of the People's Republic of China, Peak area + content

  • DB11/T 107-1998 Method for measuring the area of commercial housing
  • DB11/T 1388-2017 Technical specification for heating metering system by on-off time area method

BE-NBN, Peak area + content

  • NBN T 04-248-1983 Tritolyl phosphate for industrial use - Determination of apparet free phenols content-Volumetric method
  • NBN B 06-002-1983
  • NBN-EN 430-1994 Resilient floor coverings - Determination of mass per unit area
  • NBN P 32-007-1977 Zinc alloys - Determination of aluminium content Volumetric method
  • NBN T 03-261-1980 Phosphoric acid for industrial use - Determination of calcium content - Volumetric method
  • NBN T 03-341-1981 Boric acid for industrial use- Determination of boric acid content-Volujnetric method
  • NBN T 03-342-1981 Boric oxide for industrial use - Determination of boric oxide content - Volumetric method
  • NBN T 03-251-1980 Liquid chlorine for industrial use - Method of sampling (for deter-mining only the volumetric chlorine content)

YU-JUS, Peak area + content

  • JUS H.B8.288-1983 Fertilizers. Determination of content total-nitrogen. Volumetric method
  • JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content
  • JUS H.B8.286-1983 Fertilizers. Determination of content nitrat-nitrogen. Volumetric method
  • JUS H.B8.285-1983 Fertilizers. Determination of content amoniac-nitrogen. Volumetric method
  • JUS H.G8.124-1984 Reagents. Ammonia solution. Determination af ammonia content. Volumetric method
  • JUS H.G8.067-1983 Reagents. Boric acid. Determination of boric acid content. Volumetric method
  • JUS H.F8.211-1986 Gases. Acetylene. Determination ofcontent ofhy
  • JUS H.F8.602-1991 Natural gas. Determination of potencial hydrocarbon liquid content. Volumetric metbod
  • JUS H.B8.482-1989 Acetone for industrial use. Determination of acetone content. Volumetric method
  • JUS H.F8.221-1986 Gases. Acetylene. Determination of pbosphor-hydrogene content. Vohmetric method
  • JUS H.G8.499-1991 Reagents. Formic acid. Determination of formic acid content. Volumetric method
  • JUS H.G8.505-1991 Reagents. Formic acid. Determination of acetic acid content. Volumetric method
  • JUS H.G8.041-1982 Reagents. Si Iver nitrate. Determination of silver nitrate content. Volumetnc method\
  • JUS H.G8.077-1983 Reagents. Sodium chloride. Determination ofsodium chloride content. Volumetric method
  • JUS H.B8.217-1984 Acetic acid for industrial use. Determination of total acetaldehyde content. Volumetric method
  • JUS H.G8.428-1990 Reagents. Potassium iodide. Determination of potassium iodide content. Volumetric method
  • JUS H.G8.098-1984 Reagents. Potassium chloride. Determination of potassium chloride content. Volumetric method
  • JUS H.G8.452-1991 Reagents. Potassium sulpbate. Determination of potassium sulphate content. Volumetric method
  • JUS H.G8.307-1987 Reagents. Copper(l) cyanide. Determination of coppercontent Volumetric method
  • JUS H.G8.503-1991 Reagents. Formic acid. Determination of sulphites content. Volumetric method
  • JUS C.A6.022-1982 Volumetric method for determining tin coating mass (lodine method)
  • JUS H.B8.238-1988 Etanol for industrial use. Estimation ofcontent of carbonyl compounds present in moderate amounts. Volumetric method
  • JUS H.G8.320-1988 Reagents. (+)-Tartaric acid. Determination of tartaric aci? content. Volume.tric method
  • JUS H.G8.472-1991 Reacjents. Orthophosphpric acid. Determination of orthophosphoric acid content. Volumetric method
  • JUS H.G8.192-1985 Reagents. Ammonium chloride. Determination of ammonium chloride content. Volumetric method
  • JUS H.G8.139-1985 Peagents. Ammonium sulphate. Determination of ammonium sulphatecontent Volumetric method
  • JUS H.G8.328-1987 Reagents. Ammonium acetate. Determination of ammonium acetate content. Volumetric method
  • JUS H.P8.041-1992 Copper oxychloride,as pesticide - Determination of copper content - Volumetric method
  • JUS H.B8.239-1988 Ethanot for industrial use. Determination of methanol content (methanol contents between 0,10 and 1J50% (V/V)). Visualcolorimetricmethod
  • JUS H.G8.050-1983 Reagents, Hydrogen peroxide. Determination of hydrogen peroxide content. Volumetric method
  • JUS H.G8.284-1987 Reagents. Copper(ll) oxide. Determination ofcopper(ll) oxide content. Volumetric method
  • JUS H.P8.040-1984 Calaum cyamde, technical. Datermination of calcium cyanide content. Volumetrn: method
  • JUS H.G8.350-1989 Reagents. Acetone. Determination of free acid content (as CH_C00H). Volumetric method
  • JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method
  • JUS H.P8.041-1984 Testing of pesticides. Copper oxychlande. techmcal. Determination of copper content. Volumetric method
  • JUS H.G8.052-1983 Reagents. Hydrogen peroxide. Determination of free acid content (as H2SO^). Volumetric method
  • JUS H.B8.479-1989 Acetone for industrial use. Determination of free alkali content (as NH,). Volumetric method
  • JUS H.G8.211-1985 Reagents. Methanol. Determination of freealkalicontent !asNH3j. Volumetricmethod
  • JUS H.B8.232-1988 Ethanol for industrial use. Determination of acid content (acetic acid). Voiumetric method
  • JUS H.G8.351-1989 Reagents. Acetone- Determinatioti of free alkali content (as NH~) . Volunetri c method
  • JUS H.B8.654-1983 Hydrogen peroxide for industrial use. Determination of hydrogen peroxide content. Volumetric method
  • JUS H.G8.485-1991 Reagents. Potassium perraangar.ate. Determination of potassium permanganate content. Volumetric method
  • JUS E.Z8.012-1994 Soups,broaths,sauces and seasonings - Determination of the sodium chloride content - Volumetric method

TR-TSE, Peak area + content

  • TS 1139-1972 THE DETERMINATION OF THE WEIGHT PER UNIT OF THE SLIVERS
  • TS 2236-1976 LIQUID FLOLW MEASUREMENT ?N ?PEN CHANNELS VELOCITY - AREA METHODS
  • TS 1038-1971 PHOSPHORIC ACID FOR INDUSTRIAL USE DETERMINATION OF CALCIUM CONTENT VOLUMETRIC METHOD
  • TS 760-1969 PHOSPHORIC ACID FOR INDUSTRIAL USE DETERMINAT?ON OF SULPHATE CONTENT VO?.UMATRTC METHOD
  • TS 1923-1975 ADIPATE ESTERS FOR INDUSTRIAL USE DF.TERMINATION OF ESTER CONTENT VOLUMETRIC METKOD
  • TS 756-1969 SODIUM CARBONATE FOR INDUSTRIAL USE DETERMINATION OF CHLORIDE CONTENT VOLHARD VOLUMETRIC METHOD
  • TS 3243-1978 Machine-Made Textile Floor Coverings- Determination Of Mass Per Unit Area

Professional Standard - Ocean, Peak area + content

  • HY 070-2003 Specifications for surveying sea using area
  • HY/T 070-2022 Specifications for the measurement of sea area use area
  • HY070-2003 Specifications for the measurement of sea area use area

Association of German Mechanical Engineers, Peak area + content

American National Standards Institute (ANSI), Peak area + content

Liaoning Provincial Standard of the People's Republic of China, Peak area + content

Chongqing Provincial Standard of the People's Republic of China, Peak area + content

Group Standards of the People's Republic of China, Peak area + content

  • T/ZS 0524-2023 Technical specification for housing area measurement
  • T/CSAE 238-2021 Vehicle frontal area measurement method
  • T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
  • T/SKZB 004-2022 specification for management and control of net content of yellow rice wine filling volume

PT-IPQ, Peak area + content

FI-SFS, Peak area + content

ZA-SANS, Peak area + content

  • SANS 5845:2006 Bulk densities and voids content of aggregates
  • SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
  • SANS 6004:2005 Mass of total pile yarn per unit area of tufted textile floor coverings
  • SANS 80:2004 Mass (oven-dry plus conventional allowance) per unit area of textile fabrics, free from non-fibrous material
  • SANS 79:2004 Textiles - Mass per unit area of conditioned fabrics
  • SANS 5385:2005 Mass per unit area of conditioned knitted textiles

International Truck and Engine Corporation (ITEC), Peak area + content

Professional Standard - Petroleum, Peak area + content

  • SY/T 5408-1991 Determination of the content of sticky particles in sedimentary rocks

Professional Standard - Petrochemical Industry, Peak area + content

  • SH/T 0638-1996 Microcrystalline Wax Oil Content Determination (Volume Method)

国家能源局, Peak area + content

  • SY/T 5408-2018 Determination of clay particle content in sedimentary rocks

CZ-CSN, Peak area + content

  • CSN 49 0162-1975 Testing of physical and mechanical pro- perties of chipboards. Volume weight and square weight

American Society of Mechanical Engineers (ASME), Peak area + content

VN-TCVN, Peak area + content

  • TCVN 6655-2000 Soil quality.Determination of carbonate content.Volumetric method
  • TCVN 7097-2002 Threshed tobacco.Determination of residual stem content
  • TCVN 7837-2-2007 Rubber.or plastics-coated fabrics.Determination of roll characteristics.Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

ES-AENOR, Peak area + content

TIA - Telecommunications Industry Association, Peak area + content

Canadian General Standards Board (CGSB), Peak area + content

IT-UNI, Peak area + content

PL-PKN, Peak area + content

  • PN C04087-1989 Crude petroleum and petroleum products Determination contens of water and sediment by the centrifuge method
  • PN B02365-1970 Surface area of buildings. Classification, definitions and methods of measurement
  • PN BN 6110-23-1967
  • PN-EN ISO 10352-2021-02 E Fibre-reinforced plastics--Moulding compounds and prepregs--Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

RO-ASRO, Peak area + content

  • STAS SR ISO 1015:1994 Brown coals and lignites. Determination of moisture content. Direct volumetric method
  • STAS SR 12800/10-1993 Modifying alloys for cast irons. Determination of manganeese content. Volumetrical method.
  • STAS 12800/12 Modifying alloys for cast irons. Determination of copper content Volumetric method by sodium thiosulphate
  • STAS SR ISO 9864:1996 Geotextiles Determination of mass per unit area
  • STAS SR 13171-7-1995 Alluvial products and titanium-zirconium concentrates Determination of total iron
  • STAS SR 13171-10-1997 Alluvial products and concentrates with titaniu-zirconium content Method for determination of sulphur content
  • STAS SR 13171-11-1997 Alluvial products and concentrates with titaniu, zirconium content Method for determination of phosphorus content

International Federation of Trucks and Engines, Peak area + content

(U.S.) Telecommunications Industries Association , Peak area + content

Taiwan Provincial Standard of the People's Republic of China, Peak area + content

  • CNS 14279-1998 Method of test for measuring mass per unit area of geotextiles
  • CNS 9662-1987 Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method

GM Daewoo, Peak area + content

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Peak area + content

Professional Standard - Agriculture, Peak area + content

  • NY/T 251-1995 Determination of mass per unit area of sisal fabric

农业农村部, Peak area + content

  • NY/T 251-2019 Determination of mass per unit area of sisal fabric

Professional Standard - Chemical Industry, Peak area + content

  • HG/T 3050.2-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 2:Method for determination of total mass per unit area,mass per unit area of coating and mass per unit area of substrate

Japanese Industrial Standards Committee (JISC), Peak area + content

  • JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate
  • JIS A 1118:2022 Method of test for air content of fresh concrete by volumetric method
  • JIS A 1118:1997 Method of test for air content of fresh concrete by volumetric method
  • JIS A 1118:1975 Method of test for air content of fresh concrete by the volumetric method

AR-IRAM, Peak area + content

未注明发布机构, Peak area + content

  • BS EN 2331:1993(1999) Textile glass fibre preimpregnates — Test method for the determination ofthe resin and fibre content and mass offibre per unit area
  • BS EN 430:1994(1999) Resilient floor coverings — Determination ofmass per unit area

AT-ON, Peak area + content

  • OENORM EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
  • ONORM M 6293-1989 Analysis of sewage Sludge; determination of phosphorus in Sludges and Sediments
  • ONORM EN 2331-1993 Aerospace series - Textile glass fibre preimpregnates -Test method for the determination of the resin and fibre content and mass of fibre per unit area

CH-SNV, Peak area + content

  • SN EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

NL-NEN, Peak area + content

  • NEN 3327-1966 Feeding stuffs. Determination of the crude fiber content by the sand method
  • NEN 6155-1972 Determination of mass per area of the pile yarn of carpets

European Association of Aerospace Industries, Peak area + content

  • AECMA PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area Issue P 1

Electrostatic Discharge Association (ESDA), Peak area + content

ESD - ESD ASSOCIATION, Peak area + content

  • STM11.12-2007 Volume Resistance Measurement of Static Dissipative Planar Materials
  • STM11.12-2015 Volume Resistance Measurement of Static Dissipative Planar Materials

GOSTR, Peak area + content

  • GOST 30053-2017 Reinforcement products. Method for determination the mass per unit area of the mats and fabric

API - American Petroleum Institute, Peak area + content

  • API PUBL 4540-1992 Area and Volume Source Air Quality Model Performance Evaluation Phase II Final Report

ISA - International Society of Automation, Peak area + content

  • ISA RP16.6-1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters)

Professional Standard - Construction Industry, Peak area + content

  • JG/T 379-2012 Technical requirements of the heat allocation device by heating time and heating area

Jilin Provincial Standard of the People's Republic of China, Peak area + content

  • DB22/T 3171-2020 Measuring method of single plate heat transfer area of plate heat exchanger

IN-BIS, Peak area + content

Professional Standard - Medicine, Peak area + content

  • YY/T 1278-2015 Measuring methods for beam area of medical ultrasound equipment transducer




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved