ZH
RU
ES

Peak area and content

Peak area and content, Total:498 items.

In the international standard classification, Peak area and content involves: Products of the textile industry, Products of the chemical industry, Testing of metals, Iron and steel products, Construction industry, Buildings, Construction materials, Packaging materials and accessories, Paper and board, Wood-based panels, Reinforced plastics, Measurement of fluid flow, Road engineering, Water quality, Materials for aerospace construction, Metalliferous minerals, Measurement of volume, mass, density, viscosity, Rubber and plastics products, Cereals, pulses and derived products, Non-metalliferous minerals, Services, Installations in buildings, Insulating materials, Meat, meat products and other animal produce, Fuels, Materials for the reinforcement of composites, Elements of buildings, Footwear, Surface treatment and coating, Non-ferrous metals, Radiocommunications, MINING AND MINERALS, Leather technology, Vocabularies, Linear and angular measurements, Edible oils and fats. Oilseeds, Analytical chemistry, Radiation measurements, Nuclear energy engineering, Tyres, Inorganic chemicals, Particle size analysis. Sieving, Welding, brazing and soldering, Food products in general, Non-textile floor coverings, Equipment for petroleum and natural gas industries, Petroleum products in general, Fertilizers, Astronomy. Geodesy. Geography, Optics and optical measurements, Farming and forestry, Paints and varnishes, Construction of airports, Radiation protection, Ferrous metals, Cans. Tins. Tubes, Medical equipment, Cinematography, Metrology and measurement in general, Soil quality. Pedology, Products of non-ferrous metals.

Professional Standard - Textile, Peak area and content

FZ/T 01033-1993 Determination of the mass per unit area and the amount of pile (cover) of pile fabrics
FZ/T 01033-2012 Test method of mass per unit area and pile percent of pile fabric

International Organization for Standardization (ISO), Peak area and content

ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 3734:1976 Crude petroleum and fuel oils; Determination of water and sediment; Centrifuge method
ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area
ISO 3801:1977 Textiles; Woven fabrics; Determination of mass per unit length and mass per unit area
ISO 11052:1994 Durum wheat flour and semolina - Determination of yellow pigment content
ISO 4287:1997/Amd 1:2009 Geometrical Product Specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Amendment 1: Peak count number
ISO 2106:1982 Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method
ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
ISO 2420:2017 | IULTCS/IUP 5 Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area
ISO 1088:1985 Liquid flow measurement in open channels; Velocity-area methods; Collection and processing of data for determination of errors in measurement
ISO 1691:1976 Sodium and potassium silicates for industrial use; Determination of carbonates content; Gas-volumetric method
ISO 10111:2019 Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 10352:1997 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 2106:1982/Amd 1:1983 Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
ISO 10111:2000 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
ISO 10352:1991 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
ISO 6719:1986 Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
ISO 10352:2020 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 4318:1978 Surface active agents and soaps — Determination of water content — Azeotropic distillation method
ISO 4318:1989 Surface active agents and soaps; determination of water content; azeotropic distillation method
ISO 15169:2003 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
ISO/DIS 25178-603:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments
ISO 4317:2011 Surface-active agents and detergents - Determination of water content - Karl Fischer methods
ISO 4317:1991 Surface-active agents and detergents; determination of water content; Karl Fischer method
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO/DIS 25178-604:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments

British Standards Institution (BSI), Peak area and content

BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS EN ISO 10352:2020 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN ISO 2286-2:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
19/30336188 DC BS EN ISO 10352. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
BS EN 2331:1993 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area
BS EN 15221-6:2011 Facility management. Area and space measurement in facility management
BS EN ISO 21415-2:2008 Wheat and wheat flour. Gluten content. Determination of wet gluten by mechanical means
BS EN 951:1999 Door leaves - Method for measurement of height, width, thickness and squareness
BS EN ISO 21415-2:2015 Wheat and wheat flour. Gluten content. Determination of wet gluten and gluten index by mechanical means
20/30404177 DC BS EN ISO 25178-700. Geometrical product specifications (GPS). Surface texture: Areal. Part 700. Calibration, adjustment and verification of areal topography measuring instruments
BS ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area
BS 2866:1984 Methods for determination of the mass of warp and weft per unit area of fabric
BS 2471:2005 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
BS EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content
BS EN ISO 10111:2002 Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
BS EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets
BS EN 1849-2:2010 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets
BS EN ISO 2420:2017 Leather. Physical and mechanical tests. Determination of apparent density and mass per unit area
BS EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit of length and unit area
21/30436458 DC BS EN 2559. Aerospace series. Carbon, glass and aramid fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area
BS EN 2559:2022 Tracked Changes. Aerospace series. Carbon, glass and aramid fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area
BS EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
23/30473752 DC BS EN 2559 AMD 1. Aerospace series. Carbon, glass and aramid fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area
BS EN ISO 10352:2010 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN 15909:2010 Fertilizers - Determination of calcium and formate in calcium foliar fertilizers
BS EN ISO 10111:2019 Tracked Changes. Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
BS EN 13040:2007(2008) Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS EN 1849-1:2000 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Bitumen sheets for roof waterproofing
BS EN ISO 6719:2010 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
18/30381028 DC BS EN 15221-6. Facility Management - Part 6. Area and Space Measurement in Facility Management
BS ISO 19962:2019 Optics and photonics. Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
BS EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique
BS EN 13036-1:2002 Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique
BS EN 1849-2:2001 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets for roof waterproofing
BS ISO 1763:2020 Textile floor coverings. Determination of number of tufts and/or loops per unit length and per unit area
BS ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
BS EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
19/30375464 DC BS ISO 1763. Textile floor coverings. Determination of number of tufts and/or loops per unit length and per unit area

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Peak area and content

GB/T 13305-2008 Micrographic method for method determining area content of the α-phases in stainless steels
GB/T 13305-1991 Austenitic stainless steels.Determination of area content of the alpha-phase.Micrographic method using standard diagrams
GB/T 3365-2008 Carbon fiber reinforced plastics.Determination of void content and fiber volume content
GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels
GB/T 4669-1995 Textiles--Woven fabrics--Determination of mass per unit length and mass per unit area
GB/T 4669-2008 Textiles.Woven fabrics.Determination of mass per unit length and mass per unit area
GB/T 15231.1-1994 Test methods for the properties of glass fibre reinforced cement. The volume density, water content and glass fibre content
GB/T 5506.1-2008 Wheat and wheat flour.Gluten content.Part 1:Determination of wet gluten by manual method
GB/T 5506.2-2008 Wheat and wheat flour.Gluten content.Part 2:Determination of wet gluten by mechanical means
GB/T 20017-2005 Metallic and other inorganic coatings.Measurement of mass per unit area.Review of gravimetric and chemical analysis methods
GB/T 5506.3-2008 Wheat and wheat flour.Gluten content.Part 3:Determination of dry gluten from wet gluten by an oven drying method
GB/T 5506.4-2008 Wheat and wheat flour.Gluten content.Part 4:Determination of dry gluten form wet gluten by a rapid drying method
GB/T 5560-2003 Nonionic surface active agents--Determination of polyethylene glycols and non-ionic active matter(adducts)--Weilbull method
GB/T 11275-1995 Surface active agents and soaps--Determination of water content--Azeotropic distillation method
GB/T 7380-1995 Surface active agents and detergents--Determination of water content--Karl Fischer method
GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)

SE-SIS, Peak area and content

SIS SS 02 10 51-1987 Area and volume of buildings - Terminology and measurement
SIS SS 02 10 52-1989 Area and volume of buildings -Terminology and measurement
SIS 23 27 12 E-1970 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS SS 25 12 69-1981 Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
SIS SS 02 81 75-1989 Metal content of water, sludge and sediment determined by flameless atom/c absorption spectrometry — Special guidelines for mercury
SIS SS 02 81 49-1980 Metal content of water, sludge and sediment determined by atomic absorption spectroscopy, atomization in flame — Solvent extraction

Society of Automotive Engineers (SAE), Peak area and content

SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel

Danish Standards Foundation, Peak area and content

DS 13000:2007 Measurement of buildings, concepts of area and volume
DS 13000:2021 Measurement of buildings, concepts of area and volume – CORRECTIONS 1
DS/EN ISO 2286-2:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DS/EN 2559:1998 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
DS/EN 15221-6:2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
DS/EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
DS/EN ISO 21415-4:2007 Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method
DS/EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
DS/EN ISO 21415-3:2007 Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten from wet gluten by an oven drying method
DS/EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content
DS/EN ISO 21415-1:2007 Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method
DS/INF 49:1990 Non-round general use light gauge metal containers. Nominal filling volumes and nominal cross-sections
DS/EN 1849-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
DS/EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
DS/EN ISO 21415-2:2008 Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten by mechanical means
DS/EN 13036-1:2011 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
DS/EN 1849-1:2000 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
DS/EN 723:2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
DS/EN ISO 4524-6:1995 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts

Association Francaise de Normalisation, Peak area and content

NF EN 16074:2019 Peintures et vernis - Détermination de la teneur en matière non volatile et du rendement superficiel spécifique de revêtements pour prélaquage
NF B56-013:1980 Panneaux fibragglo - Détermination de la masse volumique et de la masse surfacique
NF T57-511*NF EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
NF G37-102-2*NF EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2 : methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
NF ISO 9030:2000 Pétrole brut - Détermination de la teneur en eau et en sédiments - Méthode par centrifugation
NF EN ISO 3735:1999 Pétrole brut et fuel-oils - Détermination de la teneur en sédiments - Méthode par extraction.
NF X31-505:1992 Soil quality - Physical methods - Method for determining the bulk volume and the water content of lumps of earth
NF L17-723*NF EN 2331:1993 Aerospace series. Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area.
NF L17-422*NF EN 2559:1997 Aerospace series. Carbon fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area.
NF X10-309:1986 Liquid flow measurement in open channels. Velocity area methods. Collecting and processing of data for determination of errors measurement.
NF G52-011*NF EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
NF G07-169*NF EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area.
NF ISO 3734:2000 Produits pétroliers - Détermination de la teneur en eau et en sédiments dans les fuel-oils résiduels - Méthode par centrifugation
NF EN ISO 21415-2:2015 Blé et farines de blé - Teneur en gluten - Partie 2 : détermination du gluten humide et du gluten index par des moyens mécaniques
NF X11-601:1979 Sieving and granulometry. Determination of the area per unit of mass or volume of powders by permeametry. Lea and nurse method.
NF G38-108:1995 Geotextiles and geotextiles and geotextile-related products. Determination of mass per unit area.
NF A91-125:2002 Metallic coatings and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods.
NF A91-125*NF EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
NF EN ISO 19219:2004 Corps gras d'origines animale et végétale - Détermination de la teneur en sédiments visibles dans des graisses et huiles brutes
NF EN ISO 21415-1:2007 Blé et farines de blé - Teneur en gluten - Partie 1 : détermination du gluten humide par une méthode manuelle
NF G07-115:1977 Textiles. Test for woven fabrics. Method of determining of mass per unit length and mass per unit area of pieces.
NF V03-730-2*NF EN ISO 21415-2:2015 Wheat and wheat flour - Gluten content - Part 2 : determination of wet gluten and gluten index by mechanical means
NF EN ISO 10352:2020 Plastiques renforcés de fibres - Mélanges à mouler et préimprégnés - Détermination de la masse surfacique et de la masse des fibres par unité de surface
NF A91-488*NF EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
NF T57-511:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area.
NF T57-511:1997 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area.
NF ISO 19962:2019 Optique et photonique - Méthodes de mesure spectroscopique pour la diffusion intégrée par des éléments optiques à plans parallèles
NF EN ISO 21415-4:2007 Blé et farines de blé - Teneur en gluten - Partie 4 : détermination du gluten sec à partir du gluten humide par une méthode de séchage rapide
NF V03-730-2:2008 Wheat and wheat flour - Gluten content - Part 2 : determination of wet gluten by mechanical means.
NF U42-154*NF EN 15909:2010 Fertilizers - Determination of calcium and formate in calcium foliar fertilizers.
NF ISO 4318:1989 Agents de surface et savons - Détermination de la teneur en eau - Méthode par entraînement azéotropique.
NF V03-730-3*NF EN ISO 21415-3:2007 Wheat and wheat flour - Gluten content - Part 3 : determination of dry gluten from wet gluten by an oven drying method.
NF EN ISO 21415-3:2007 Blé et farines de blé - Teneur en gluten - Partie 3 : détermination du gluten sec à partir du gluten humide par une méthode de séchage en étuve
NF M62-210:1984 Enceintes de confinement - Méthode de contrôle du taux de fuite horaire - Enceintes de classes 1 et 2 - Méthode de mesurage de l'augmentation du titre volumique en oxygène.
NF M08-025*NF ISO 15169:2004 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems.
NF P84-128-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2 : plastic and rubber sheets.
NF T73-209*NF ISO 4317:2012 Surface-active agents and detergents - Determination of water content - Karl Fischer methods.
NF T73-202*NF ISO 4318:1989 Surface active agents and soaps. Determination of water content. Azeotropic distillation method.
NF G35-004*NF ISO 1763:2022 Textile floor coverings - Determination of number of tufts and/or loops per unit length and per unit area
NF ISO 1763:2022 Revêtements de sol textiles - Détermination du nombre de touffes et/ou de boucles par unité de longueur et par unité de surface
NF EN 13036-1:2010 Caractéristiques de surface des routes et aérodromes - Méthodes d'essai - Partie 1 : mesurage de la profondeur de macrotexture de la surface d'un revêtement à l'aide d'une technique volumétrique à la tâche
NF ISO 4317:2012 Agents de surface et détergents - Détermination de la teneur en eau - Méthodes de Karl Fischer
NF G07-157:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Determination of the mass of warp and weft per unit area of fabric.
NF A91-095-4:1987 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 4 : determination of gold content.
NF EN IEC 62604-1:2022 Duplexeurs à ondes acoustiques de surface (OAS) et à ondes acoustiques de volume (OAV) sous assurance de la qualité - Partie 1 : Spécification générique
NF P84-128-2*NF EN 1849-2:2019 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2 : plastics and rubber sheets for roof waterproofing

BE-NBN, Peak area and content

NBN B 06-002-1983
NBN T 04-248-1983 Tritolyl phosphate for industrial use - Determination of apparet free phenols content-Volumetric method
NBN T 03-348-1981 Crude sodium borates for industrial use - Determination of sodium oxide and boric oxidecontents - Volumetric method
NBN I 07-003-1986
NBN T 03-344-1981 Hydrated sodium perborates for industrial use - Determination of sodium oxide, boric oxide and available oxygen contents - Volumetric methods
NBN-ISO 4318:1990 Surface active agents and soaps - Determination of water content - Azeotropic distillation method
NBN T 63-135-1980 Surface active agents and soaps - Determination of water content - Azeo-tropic distillation method

KR-KS, Peak area and content

KS M ISO 2286-2-2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS M ISO 11605-2003 Paper and board－Calibration of variable-area flowmeters
KS B ISO 1088-2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS H ISO 21415-2-2020 Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means
KS H ISO 21415-1-2020 Wheat and wheat flour — Gluten content —Part 1: Determination of wet gluten by a manual method
KS H ISO 21415-4-2020 Wheat and wheat flour — Gluten content — Part 4: Determination of dry gluten from wet gluten by a rapid drying method
KS H ISO 21415-3-2020 Wheat and wheat flour — Gluten content — Part 3: Determination of dry gluten from wet gluten by an oven drying method
KS A ISO 8687-2003(2023) Cinematography - Signal-to-noise ratio of 8mm type S, 16mm and 35mm variable-area photographic Sound records - Method of measurement
KS K ISO 7211-6-2019 Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric

ZA-SANS, Peak area and content

SANS 5845:2006 Bulk densities and voids content of aggregates
SANS 80:2004 Mass (oven-dry plus conventional allowance) per unit area of textile fabrics, free from non-fibrous material
SANS 6075:1983 Total ash content (PVC upper, outer sole and heel materials)
SANS 6076:1983 Ether-soluble matter content (PVC upper, outer sole and heel materials)
SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

CZ-CSN, Peak area and content

CSN 49 0162-1975 Testing of physical and mechanical pro- perties of chipboards. Volume weight and square weight
CSN 46 1011 Cast.5-1988 Testing of cereals, legumes and oil-bea-ring crops. Cereal testing. Volume weight determination
CSN 68 1145-1994 Testing methods for surfactans and detergents. Analysis of soaps — Determination of total alkali content and total fatty atter content
CSN 68 1157-1994 Testing methods for surfactans and detergents. Determination of chelating agent content
CSN 68 1150-1994 Testing methods for surfactans and detergents. Determination of the carbonates content

YU-JUS, Peak area and content

JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content
JUS E.Z8.012-1994 Soups,broaths,sauces and seasonings - Determination of the sodium chloride content - Volumetric method
JUS H.G8.341-1988 Reagents. Zine cbloride. Deterainaticm of -zine oxide chloride ctmteut. Volumctric method
JUS H.G8.301-1987 Reagents. Silver cyanide and potassium dicyanoargentate. Determination of silver content. Volumetric method
JUS H.G8.152-1984 Reagents. Sodium carbonate anhydrous and sodium carbonate decahydrate. Determination of sodium carbonate and sodium carbonate decahydrate contents. Volumetric method
JUS H.G8.509-1991 Reagents. Potassium hydroxide. Determination of potassium hydroxide and carbonate contents. Volumetric method
JUS H.C8.216-1989 Pigment. Basic zine potassium chromate and zine tetrahvdroxvchromate. Determination of water-soluble chlorides content (as Cl). Volumetric method
JUS H.C8.221-1989 Pigments- Basic zine potassium chromate. Determination of alkali metal content (as Ko0). Volumefric method
JUS C.T7.225-1984 Anodic oxidation of aluminium and aluminium alloys. Determination of mass par unit area of anodic oxide coatings. Gravimetric method
JUS H.G8.371-1989 Reagents. Sodium acetate trihydrate and sodium acetate anhvdrous. Determination of sodium acetate trihydrate and sodium acetate contents. Volumetric method
JUS H.C8.222-1989 Pigments. Basic zine potassium chromat and zine tetrahvdroxvchromate. Determination of zine content (as ZnO). Volumetric method
JUS B.H8.310-1984 Methods of ana/ysis of coal and coke. Determination of moisture in the analysis sample of coal by the direct volumetric method
JUS H.C8.220-1989 Pigments. Basic zine Dotassium chromate and zine tetrahvdroxychromate. Determination of chromate content (as CrO,). Volumetric method

Group Standards of the People's Republic of China, Peak area and content

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/SKZB 004-2022 specification for management and control of net content of yellow rice wine filling volume

German Institute for Standardization, Peak area and content

DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN EN ISO 10352:2020-12 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN 1229:1996 Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas
DIN EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1
DIN EN ISO 2286-2:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-...
DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
DIN EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993
DIN EN 2559/A1:2023-08 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022/prA1:2023 / Note: Date of issue 2023-07-07*Intended as an amend...
DIN EN 2559:2023-07 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German and English version EN 2559:2022 / Note: To be amended by DIN EN 2559/A1 (2023-08) (in preparati...
DIN EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN EN 2331:1993-04 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993
DIN EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-2:2
DIN EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998
DIN EN ISO 2286-3:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016); German version EN ISO 2286-3:2016
DIN 65571-3:1992-11 Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section
DIN EN ISO 15301:2002 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001
DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN EN ISO 25178-700:2023-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022); German version EN ISO 25178-700:2023
DIN EN ISO 2420:2017-05 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017); German version EN ISO 2420:2017
DIN EN 15221-6:2011-12 Facility Management - Part 6: Area and Space Measurement in Facility Management; German version EN 15221-6:2011 / Note: To be replaced by DIN EN 15221-6 (2018-12).
DIN 19580:2010-07 Drainage channels for vehicular and pedestrian areas - Durability, mass per unit area and evaluation of conformity / Note: Applies in conjunction with DIN EN 1433 (2005-09).
DIN EN ISO 21415-2:2016 Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten and gluten index by mechanical means (ISO 21415-2:2015); German version EN ISO 21415-2:2015
DIN EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area; English version of DIN EN 14971:2006-04
DIN EN ISO 21415-2:2016-03 Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten and gluten index by mechanical means (ISO 21415-2:2015); German version EN ISO 21415-2:2015
DIN EN ISO 10111:2019-04 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019); German version EN ISO 10111:2019
DIN V 19580:2003 Drainage channels for vehicular and pedestrian areas - Weathering resistance, mass per unit area and third party control
DIN EN ISO 21415-1:2007 Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method (ISO 21415-1:2006); German version EN ISO 21415-1:2007
DIN EN ISO 21415-1:2007-07 Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method (ISO 21415-1:2006); German version EN ISO 21415-1:2007
DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; German version EN 13040:2007
DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
DIN EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
DIN EN 15221-6:2011 Facility Management - Part 6: Area and Space Measurement in Facility Management; German version EN 15221-6:2011
DIN 65571-3:1992 Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section
DIN EN 2559:2021 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; English version prEN 2559:2021
DIN EN ISO 10111:2018 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO/DIS 10111:2018); German and English version prEN ISO 10111:2018
DIN EN ISO 21415-3:2007-06 Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten from wet gluten by an oven drying method (ISO 21415-3:2006); German version EN ISO 21415-3:2007
DIN 19580:2010 Drainage channels for vehicular and pedestrian areas - Durability, mass per unit area and evaluation of conformity
DIN 53220:1978 Paints, varnishes and similar coating materials; paint consumption required for coating an area, concepts and parameters
DIN EN 1849-1:2000 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing; German version EN 1849-1:1999
DIN EN ISO 21415-4:2007-07 Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method (ISO 21415-4:2006); German version EN ISO 21415-4:2007
DIN EN 13036-1:2010-10 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique; German version EN 13036-1:2010
DIN 50988-2:1988 Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method
DIN EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005); German version EN ISO 9864:2005
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN EN 1849-2:2019 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing
DIN EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000); German version EN ISO 10111:2001)

PL-PKN, Peak area and content

PN C04087-1989 Crude petroleum and petroleum products Determination contens of water and sediment by the centrifuge method
PN B02365-1970 Surface area of buildings. Classification, definitions and methods of measurement
PN-EN ISO 10352-2021-02 E Fibre-reinforced plastics--Moulding compounds and prepregs--Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
PN C86004-1991 Black powders. Determination of bulk density, dust content, rial density and degree of fineness

American National Standards Institute （ANSI), Peak area and content

ANSI/TAPPI T410 om-2013 Grammage of paper and paperboard (weight per unit area)
ANSI/ASTM E2619:2009 Practice for Measuring and Calculating Building Loss Features that Take Up Floor Area in Buildings
ANSI/BOMA Z65.1-1996 Method for Measuring Floor Area in Office Buildings
ANSI/ASABE S593.1-2011 Terminology and Definitions for Biomass Production, Harvesting and Collection, Storage, Processing, Conversion and Utilization

IT-UNI, Peak area and content

UNI EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
UNI 6394-1977
UNI 3358-1953
UNI 4870-1961

ES-UNE, Peak area and content

UNE-EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
UNE-EN 2559:2022 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN ISO 2420:2018 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017)
UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 10111:2020 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
UNE-EN ISO 21415-2:2016 Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten and gluten index by mechanical means (ISO 21415-2:2015)

Korean Agency for Technology and Standards (KATS), Peak area and content

KS M ISO 11605:2008 Paper and board－Calibration of variable-area flowmeters
KS M ISO 11605:2003 Paper and board－Calibration of variable-area flowmeters
KS M ISO 2286-2:2012 Rubber- or plastics-coated fabrics-Determination of roll characteristics-Part 2:Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS M ISO 2286-2:2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS M ISO 2286-2-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS L ISO 3374:2003 Reinforcement products－Mat and fabics－Determination of mass per unit area
KS F 2505-2017(2022) Methods of test for bulk density of aggregates and solid content in aggregates
KS F 2234-2016 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
KS H ISO 11052:2009 Durum wheat flour and semolina-Determination of yellow pigment content
KS F 2550-2017 Methods of test for total moisture content of aggregate and surface moisture in aggregate by drying
KS D ISO 10111:2012 Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS L ISO 3374-2003(2018) Reinforcement products－Mat and fabics－Determination of mass per unit area
KS M ISO 1691:2012 Sodium and potassium silicates for industrial use－Determination of carbonates content－Gas-volumetric method
KS M ISO 3734:2011 Petroleum products－Determination of water and sediment in residual fuel oils－Centrifuge method
KS M ISO 1691:2017 Sodium and potassium silicates for industrial use — Determination of carbonates content — Gas-volumetric method
KS D ISO 10111-2012(2022) Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS M ISO 10352-2012(2017) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS H ISO 21415-2:2020 Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means
KS E ISO 320:2012 Manganese ores-Determination of sulphur content-Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
KS H ISO 11052-2009(2019) Durum wheat flour and semolina－Determination of yellow pigment content
KS H ISO 21415-1:2020 Wheat and wheat flour — Gluten content —Part 1: Determination of wet gluten by a manual method
KS M ISO 15169-2005(2020) Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
KS M ISO 10352-2012(2022) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS D ISO 10111-2012(2017) Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS M ISO 10352:2012 Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS H ISO 21415-4:2020 Wheat and wheat flour — Gluten content — Part 4: Determination of dry gluten from wet gluten by a rapid drying method
KS M ISO 4318:2007 Surface active agents and soaps－Determination of water content－Azeotropic distillation method
KS M ISO 4318-2007(2017) Surface active agents and soaps－Determination of water content－Azeotropic distillation method
KS M ISO 4318-2007(2022) Surface active agents and soaps－Determination of water content－Azeotropic distillation method
KS M ISO 15169:2005 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
KS H ISO 21415-3:2020 Wheat and wheat flour — Gluten content — Part 3: Determination of dry gluten from wet gluten by an oven drying method
KS M ISO 4317:2004 Surface-active agents and detergents－Determination of water content－Karl Fischer method
KS M ISO 4317-2004(2019) Surface-active agents and detergents－Determination of water content－Karl Fischer method
KS D ISO TR 10194:2004 Non-round general use light gauge metal containers-Nominal filling volumes and nominal cross-sections
KS A ISO 8529-3-2002(2022) Reference neutron radiations－Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence
KS A ISO 8529-3-2002(2017) Reference neutron radiations－Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence
KS K ISO 7211-6:2019 Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric

Association of German Mechanical Engineers, Peak area and content

VDI/VDE 3513 Blatt 3-1989 Variable-area flowmeters; selection and installation recommendations

AENOR, Peak area and content

UNE-EN 2559:1997 AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA.
UNE 35059-1:1990 FERROCHROMIUM AND FERROSILICOCHROMIUM. DETERMINATION OF CHROMIUM CONTENT. VOLUMETRIC METHOD
UNE 40339:2002 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area.
UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
UNE-EN 2331:1996 AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN AND FIBRE CONTENT AND MASS OF FIBRE PER UNIT AREA.
UNE 55907:1985 SURFACE ACTIVE AGENTS. ANALYSIS OF SOAPS. DETERMINATION OF TOTAL ALKALI CONTENT AND TOTAL FATTY MATTER CONTENT
UNE-EN 15221-6:2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
UNE 55611:1981 SURFACE ACTIVE AGENTS. SODIUM HYDROXIDE FOR USE AS RAW-MATERIAL IN DETERGENT FORMULATIONS. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD
UNE 55626:1983 SURFACE ACTIVE AGENTS. SODIUM AND POTASSIUM SILICATES TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD
UNE-EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods. (ISO 10111:2000)
UNE-EN 1849-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
UNE-EN 13040:2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
UNE-EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
UNE-EN ISO 21415-4:2007 Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method (ISO 21415-4:2006)
UNE 55515:1991 SURFACE ACTIVE AGENTS AND SOAPS. DETERMINATION OF WATER CONTENT. AZEOTROPIC DISTILLATION METHOD.
UNE-EN ISO 21415-3:2007 Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten from wet gluten by an oven drying method (ISO 21415-3:2006)
UNE 40600-6:1996 TEXTILES. WOVEN FABRICS. CONSTRUCTION. METHODS OF ANALYSIS. PART 6: DETERMINATION OF THE MASS OF WARP AND WEFT PER UNIT AREA OF FABRIC.
UNE-EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
UNE-EN ISO 11052:2007 Durum wheat flour and semolina - Determination of yellow pigment content (ISO 11052:1994)
UNE-EN ISO 21415-1:2007 Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method (ISO 21415-1:2006)
UNE-EN 723:2010 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

AT-ON, Peak area and content

OENORM EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
ONORM M 6293-1989 Analysis of sewage Sludge; determination of phosphorus in Sludges and Sediments
ONORM M 6270-1985 Determination ofthe water content and dry residue and/or dry matter of Sludge and Sediments
ONORM EN 2331-1993 Aerospace series - Textile glass fibre preimpregnates -Test method for the determination of the resin and fibre content and mass of fibre per unit area
ONORM S 1403-1975 Textile floor coverings; determination of mass per piece, mass per unit length and mass per unit area
OENORM EN 2559-2021 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
ONORM C 2514 Teil.1-1985 Electrodeposited coatings of gold and gold alloys; determination of coating thickness and gold content

CH-SNV, Peak area and content

SN EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

Lithuanian Standards Office , Peak area and content

LST EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
LST EN 2559-2001 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
LST ISO 3801:1998 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
LST EN ISO 2286-2:2000 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
LST 1775-2002 Fish and fishery products. Determination of chloride (salt) content. Volumetric method
LST EN 2331-2001 Aerospace series - Textile glass fibre preimpregnates - Test methods for the determination of the resin and fibre content and mass of fibre per unit area
LST EN 15221-6-2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
LST EN ISO 10111:2003 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000)
LST EN 1849-2-2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
LST EN 13040-2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
LST EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
LST EN ISO 21415-4:2007 Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method (ISO 21415-4:2006)
LST EN ISO 21415-3:2007 Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten from wet gluten by an oven drying method (ISO 21415-3:2006)
LST EN 13036-1-2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
LST EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content (ISO 11052:1994)
LST EN ISO 21415-2:2008 Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten by mechanical means (ISO 21415-2:2006)
LST EN ISO 21415-1:2007 Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method (ISO 21415-1:2006)
LST EN 1849-1-2001 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
LST EN 723-2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

Standard Association of Australia （SAA）, Peak area and content

AS 1580.301.2:1990(R2013)
AS/NZS 2111.3:1996 Textile floor coverings - Tests and measurements - Determination of mass per unit area
AS 3778.3.4:1990 Measurement of water flow in open channels - Velocity-area methods - Collection and processing of data for determination of errors in measurement
AS/NZS 4257.3:1994 Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit area of sheet
AS 3778.3.4:1990/Amdt 1:1991
AS/NZS 2111.9:1996 Textile floor coverings - Tests and measurements - Determination of the number of tufts per unit length and per unit area
AS 2836.3:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the determination of mass per unit area
AS 2001.2.13:1987 Methods of test for textiles - Physical tests - Determination of mass per unit area and mass per unit length of fabrics
AS/NZS 2111.11:1996 Textile floor coverings - Tests and measurements - Determination of total pile mass per unit area by complete dissection

RO-ASRO, Peak area and content

STAS SR 13171-7-1995 Alluvial products and titanium-zirconium concentrates Determination of total iron
STAS SR 13171-10-1997 Alluvial products and concentrates with titaniu-zirconium content Method for determination of sulphur content
STAS SR 13171-11-1997 Alluvial products and concentrates with titaniu, zirconium content Method for determination of phosphorus content
STAS 7312-1983 SURFACE AND RESIDUAL WATERS Determination of azote content
STAS 8750/3-1972 CARPETS AND MOQUETTES Determination of mass per unit area
STAS SR 13171-9-1996 Alluvial product and concentrates with titaniu zirconium content Method for determination of aluminium oxide content
STAS SR 13171-6-1994 Alluvial products and titanium-zirconium content concentrates. Determination of calcium oxide and magnesium oxide content
STAS 7661-1989 SURFACE WATERS AND WASTE WATERS Sulphites content determina tion
STAS 6283/1-1983 Agricultural food seeds. WIIEAT DeU'rmination of gluten content and gluten deformation number and cal- culation of gluten number
STAS 12708-1989 WOVEN FABRICS Determination of mass of warp and weft per unit area of fabric
STAS 11624/7-1983 PHOSPHATING SOLUTIONS Determination of aspect colour, density, pH and suspensions content

European Committee for Standardization (CEN), Peak area and content

EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
EN ISO 2286-2:1998 Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass Per Unit Area, Mass Per Unit Area of Coating and Mass Per Unit Area of Substrate ISO 2286-2:1998
EN ISO 21415-2:2015 Wheat and wheat flour - Gluten content Part 2: Determination of wet gluten and gluten index by mechanical means
EN 2331:1993 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area
EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content (ISO 11052:1994)
prEN 2559-2021 Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
EN 951:1998 Door leaves - Method for measurement of height, width, thickness and squareness
EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
prEN 965-1992 Geotextiles and geotextile-related products; determination of mass per unit area
EN 965:1995 Geotextiles and Geotextile-Related Products - Determination of Mass per Unit Area
EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
EN 2557:1997 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
EN ISO 21415-1:2007 Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method (ISO 21415-1:2006)
EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
EN ISO 10111:2001 Metallic and Other Inorganic Coatings - Measurement of Mass Per Unit Area - Review of Gravimetric and Chemical Analysis Methods ISO 10111:2000
EN ISO 21415-4:2007 Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method (ISO 21415-4:2006)
EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
EN ISO 10352:1997 Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area
EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
EN ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
EN 12373-12:2000 Aluminium and Aluminium Alloys - Anodizing - Part 12: Measurement of Reflectance Characteristics of Aluminium Surfaces Using Integrating-Sphere Instruments
EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
EN 12373-2:1998 Aluminium and Aluminium Alloys - Anodizing - Part 2: Determination of Mass Per Unit Area (Surface Density) of Anodic Oxidation Coatings - Gravimetric Method Ratified European Text

未注明发布机构, Peak area and content

BS EN 2331:1993(1999) Textile glass fibre preimpregnates — Test method for the determination ofthe resin and fibre content and mass offibre per unit area
DIN EN ISO 10352:1997 Fiber-reinforced plastics – molding compounds and prepregs – determination of the basis weight
ISO 3801:1977/Cor 1:1983 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area. Corrigendum 1
NF P98-831-1*NF EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1 : measurement of pavement surface macrotexture depth using a volumetric patch technique.

Professional Standard - Chemical Industry, Peak area and content

HG/T 3050.2-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 2:Method for determination of total mass per unit area,mass per unit area of coating and mass per unit area of substrate

Japanese Industrial Standards Committee (JISC), Peak area and content

JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate
JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)
JIS H 8688:2013 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings
JIS H 8688:1998 Test method for determination of mass per unit area of anodic oxide coatings on aluminium and aluminium alloys -- Gravimetric method

工业和信息化部, Peak area and content

HG/T 3050.2-2020 Determination of properties of whole rolls of rubber or plastic coated fabrics Part 2: Methods for determination of total mass per unit area, coating mass per unit area and mass of base fabric per unit area

RU-GOST R, Peak area and content

GOST 9404-1988 Flour and bran. Method of moisture content determination
GOST ISO 3734-2016 Residual fuel oil. Determination of water and sediment content by centrifuge method
GOST R 55398-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of thickness and mass per unit area
GOST 27494-2016 Flour and bran. Methods for determination of ash content
GOST 34061-2017 Welding and allied processes. Determination of hydrogen content in deposited metal and arc weld metal
GOST R ISO 3734-2009 Petroleum products. Determination of water and sediment content in residual fuel oils by centrifuge method
GOST 31738-2012 Bituminous paving mixtures. Determination of water and volatiles content
GOST 8.190-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volume humidity content of petroleum and petroleum products
GOST EN 1849-1-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Methods for determination of thickness and mass per unit area
GOST 31699-2012 Wheat and wheat flour. Determination of gluten content. Part 1. Manual method
GOST R 53020-2008 Wheat and wheat flour. Determination of gluten content. Part 1. Manual method
GOST 8.614-2013 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the volumetric water cut of oil and oil products

ISA - International Society of Automation, Peak area and content

ISA RP16.6-1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters)
ISA RP16.4-1960 Nomenclature and Terminology for Extension - Type Variable Area Meters (Rotameters)

VN-TCVN, Peak area and content

TCVN 7837-2-2007 Rubber.or plastics-coated fabrics.Determination of roll characteristics.Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
TCVN 5492-1991 Shampoo for hairs and bath.Method for determination surface of active agent content

API - American Petroleum Institute, Peak area and content

API PUBL 4540-1992 Area and Volume Source Air Quality Model Performance Evaluation Phase II Final Report
API H00005-2000 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products (First Edition)

European Association of Aerospace Industries, Peak area and content

AECMA PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area Issue P 1

ES-AENOR, Peak area and content

PT-IPQ, Peak area and content

NP 3162-1986
NP EN 12373-12-2001 Aluminium and aluminium alloys Anodizing Part 12:Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

Taiwan Provincial Standard of the People's Republic of China, Peak area and content

CNS 11151-1984 Method of Test for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete

American Society for Testing and Materials (ASTM), Peak area and content

ASTM D932-85(2009) Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
ASTM B767-88(2021) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM D932-85(2002) Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
ASTM B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(1994) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2001) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2016) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E2619-08 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E261-16 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM F870-23 Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM F870-94(2000) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM F870-94(2016) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM D6556-10 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-04 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D5625-97(2002) Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM D5625-97 Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
ASTM D5220-08 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

Aerospace, Security and Defence Industries Association of Europe (ASD), Peak area and content

ASD-STAN PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area (Issue P 1)

Indonesia Standards, Peak area and content

SNI ISO 3801:2010 Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area)

International Telecommunication Union (ITU), Peak area and content

ITU-R P.836-4-2009
ITU-R P.836-4 FRENCH-2009 Water vapour: surface density and total columnar content
ITU-R P.836-4 SPANISH-2009 Water vapour: surface density and total columnar content
ITU-R P.836-2013 Water vapour: surface density and total columnar content
ITU-R P.836-5-2013 Water vapour: surface density and total columnar content

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Peak area and content

ITU-R P.836-6-2017 Water vapour: surface density and total columnar content
ITU-R P.836-2-2001 Water Vapour: Surface Density and Total Columnar Content
ITU-R P.836-1-1997 Water Vapour: Surface Density and Total Columnar Content

IN-BIS, Peak area and content

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Peak area and content

PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area (Issue P 1)

NO-SN, Peak area and content

NS 4476-1977 Machinery and equipment for bakeries - Sanitary requirements to volume measuring equipment

国家能源局, Peak area and content

SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution

国家市场监督管理总局、中国国家标准化管理委员会, Peak area and content

GB/T 39500-2020 Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area

IX-SA, Peak area and content

AS 1587:1973

CEN - European Committee for Standardization, Peak area and content

PREN 15221-6-2018 Facility Management - Part 6: Area and Space Measurement in Facility Management
EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
PREN 1849-2017 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing

GOSTR, Peak area and content

GOST 5668-1968 Bread and bakery products. Methods for determination of fat content
GOST ISO 21415-2-2019 Wheat and wheat flour. Determination of gluten content. Part 2. Determination of wet gluten and gluten index by mechanical means

(U.S.) Ford Automotive Standards, Peak area and content

FORD FLTM EU-BS 050-2-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS
FORD FLTM EU-BS 050-02-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS
FORD FLTM BN 106-01-2001 DETERMINATION OF WEIGHT PER UNIT AREA AND DENSITY OF TRIM MATERIALS Replaces FLTM BN 006-01, FLTM EU-BN 006-01
FORD FLTM BN 106-1-2001 DETERMINATION OF WEIGHT PER UNIT AREA AND DENSITY OF TRIM MATERIALS (Replaces FLTM BN 006-01, FLTM EU-BN 006-01)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Peak area and content

GB/T 35755-2017 Surfactants and detergents—determination of formaldehyde contents

TR-TSE, Peak area and content

TS 992-1971 SODIUM HYDROXIDE AND POTASSIUM HYDROXIDE FOR INDUSTRIAL USE DETERMINATION OF CHLORIDE CONTENT VOLHARD VOLUMETRIC METHOD
TS 1822-1975 HYDRATED SODIUM PERBORATES FOR INDUSTRIAL USE DETERMINATION OF SODIUM OXIDE, BORIC OXIDE AND AVAILABLE OXYGEN CONTENTS- VOLUMETRIC METHOD

VE-FONDONORMA, Peak area and content

COVENIN 747-1974

PK-PSQCA, Peak area and content

PS 143-1961 DETERMINATION OFWEIGHT PER UNIT LENGTH AND WEIGHT PER UNIT AREA OF WOVEN OR KNITTED FABRICS

FI-SFS, Peak area and content

SFS 3192-1974

KE-KEBS, Peak area and content

KS 08-120-1981 KENYA STANDARD METHOD FOR DETERMINATION OF MASS PER UNIT LENGTH AND MASS PER UNIT AREA OF WOVEN OR KNITTED FABRICS

Professional Standard - Ferrous Metallurgy, Peak area and content

YB/T 4302-2012 Determination of oil and iron remainders on cold rolled plate and strip surface

Professional Standard - Light Industry, Peak area and content

QB/T 1324-2023 Determination of moisture content of detergents and surfactants - Karl Fischer method

TH-TISI, Peak area and content

TIS 121.12-2010 Standard test methods for textiles.part 12: woven fabrics.determination of mass per unit length and mass per unit area