ZH
RU
ES
Three-point bending test raw materials
Three-point bending test raw materials, Total:445 items.
In the international standard classification, Three-point bending test raw materials involves: Materials for aerospace construction, Inorganic chemicals, Refractories, Plastics, Road vehicle systems, Products of the textile industry, Welding, brazing and soldering, Glass, Construction materials, Reinforced plastics, Farming and forestry, Testing of metals, Mechanical testing, Rubber and plastics products, Insulating materials, Materials for the reinforcement of composites, Paints and varnishes, Valves, Pipeline components and pipelines, Paper and board, Conducting materials, Ceramics, Medical equipment, Waxes, bituminous materials and other petroleum products, Piezoelectric and dielectric devices, Products of non-ferrous metals, Raw materials for rubber and plastics, Powder metallurgy, Textile fibres, Aerospace electric equipment and systems, Products of the chemical industry, Semiconductor devices, Cellular materials, Springs, Rubber, Electrical wires and cables.
British Standards Institution (BSI), Three-point bending test raw materials
- BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
- BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
- BS EN ISO 7438:2016 Metallic materials. Bend test
- BS EN ISO 7438:2005 Metallic materials - Bend test
- 18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
- BS EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
- BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
- 18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
- BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
- BS EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
- BS EN ISO 5173:2010+A1:2011 Destructive tests on welds in metallic materials. Bend tests
- BS ISO 22407:2021 Metallic materials. Fatigue testing. Axial plane bending method
- BS EN ISO 5173:2023 Destructive tests on welds in metallic materials. Bend tests
- BS EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
- BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS ISO 21751:2011 Plastics pipes and fittings. Decohesion test of electrofusion assemblies. Strip-bend test
- BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
- BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
- BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
- 19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
- BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
- BS 4370-4:1991 Methods of test for rigid cellular materials - Method 14 - Determination of flexural properties
- BS IEC 62047-31:2019 Semiconductor devices. Micro-electromechanical devices - Four-point bending test method for interfacial adhesion energy of layered MEMS materials
German Institute for Standardization, Three-point bending test raw materials
- DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
- DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
- DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
- DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
- DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
- DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
- DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
- DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
- DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
- DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
- DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
- DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
- DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
- DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
- DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
- DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
- DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
- DIN 50113:1982 Testing of metals; Rotating bar bending fatigue test
- DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
- DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
- DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
- DIN EN ISO 5173:2023-05 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023); German version EN ISO 5173:2023
- DIN EN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021); German and English version prEN ISO 5173:2021
- DIN 51302-2:2000 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
- DIN 51030:2015-01 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
- DIN 51944 Corrigendum 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Soild materials Corrigendum 1 to English version of DIN 51944:1999-01
- DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
- DIN EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
- DIN EN ISO 7438:2016 Metallic materials - Bend test (ISO 7438:2016); German version EN ISO 7438:2016
- DIN EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
- DIN 51030:2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
- DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
- DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
- DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
- DIN 53533-1:1988 Testing of elastomeres; testing of heat generation and service life during the fatigue test (flexometer test); bases principles
- DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending test raw materials
American Society for Testing and Materials (ASTM), Three-point bending test raw materials
- ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
- ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
- ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM B593-20 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM C674-13(2018) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
- ASTM C674-13(2023) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
- ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
- ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
- ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM B820-98 Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
- ASTM D610-85(1989)e1 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
- ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
- ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
- ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM C203-99 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-22 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05a(2017) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
- ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
- ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E855-90(1995) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
- ASTM E855-21 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
- ASTM D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM C1341-00(2005) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM C1341-00 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM C1341-06 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM C1341-13(2018) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
- ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
- ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
- ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM D6109-19 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
- ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
- ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
Society of Automotive Engineers (SAE), Three-point bending test raw materials
- SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
- SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
- SAE J949-2003 Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates
European Committee for Standardization (CEN), Three-point bending test raw materials
- EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
- EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
- EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
- EN ISO 7438:2005 Metallic materials Bend test
- EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
- EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
- EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
- EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test
- EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
- prEN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021)
- EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
- PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- EN ISO 7799:2000 Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test ISO 7799:1985
- EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
- EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
- EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
- EN ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
- EN ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)
Danish Standards Foundation, Three-point bending test raw materials
- DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
- DS/EN ISO 7438:2005 Metallic materials - Bend test
- DS/ISO 7438:2020 Metallic materials – Bend test
- DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
- DS/EN 10232:1994 Metallic materials-Tube(in full section)-Bend test
- DS/EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
- DS/EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1
- DS/ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
- DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
- DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- DS/EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
- DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
- DS/EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
- DS/EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
Lithuanian Standards Office , Three-point bending test raw materials
- LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
- LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
- LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
- LST EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
- LST EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
- LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
- LST EN ISO 5173:2010/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd.1:2011)
- LST EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point bending test raw materials
- GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
- GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending
- GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites
CH-SNV, Three-point bending test raw materials
International Organization for Standardization (ISO), Three-point bending test raw materials
- ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
- ISO 7438:2005 Metallic materials - Bend test
- ISO 7438:2016 Metallic materials - Bend test
- ISO 7438:1985 Metallic materials; Bend test
- ISO 7438:2020 Metallic materials — Bend test
- ISO 7801:1984 Metallic materials; Wire; Reverse bend test
- ISO/CD 7801 Metallic materials — Wire — Reverse bend test
- ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
- ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
- ISO 8491:1986 Metallic materials; Tube (in full section); Bend test
- ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
- ISO 1143:2021 Metallic materials - Rotating bar bending fatigue testing
- ISO 5173:2009 Destructive tests on welds in metallic materials - Bend tests
- ISO 22407:2021 Metallic materials — Fatigue testing — Axial plane bending method
- ISO 5173:2023 Destructive tests on welds in metallic materials — Bend tests
- ISO 5173:2009/Amd 1:2011 Destructive tests on welds in metallic materials - Bend tests; Amendment 1
- ISO 21751:2011 Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test
- ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
- ISO 7799:1985 Metallic materials; Sheet and strip 3 mm thick or less; Reverse bend test
- ISO 10619-1:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness- Part 1:Bending tests at ambient temperature
- ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
- ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ISO 10619-2:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
Association Francaise de Normalisation, Three-point bending test raw materials
- NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
- NF A03-158:2005 Metallic materials - Bend test.
- NF A03-158:2016 Metallic materials - Bend test
- NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
- NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
- NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
- NF A03-091:1994 Metallic materials. Tube (in full section). Bend test.
- NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
- NF A89-203:1996 Destructive tests on welds in metallic materials. Bend tests.
- NF T51-120-5:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 5 : essai en flexion à moment constant.
- NF A89-203*NF EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests.
- NF T51-120-2:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 2 : essai en flexion sur éprouvettes encastrées.
- NF A03-159*NF EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.
- NF P18-413:1981 Concretes. Individual properties of hydraulic machines for bending tests of hard materials.
- XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
- NF EN ISO 14556:2023 Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy à entaille en V - Méthode d'essai instrumenté
- NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
- NF EN ISO 9016:2022 Essais destructifs des soudures sur matériaux métalliques - Essai de flexion par choc - Position de l'éprouvette, orientation de l'entaille et examen
- NF P18-411:1981 Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.
- NF EN 62047-18:2014 Dispositifs à semiconducteurs - Dispositif microélectromécaniques - Partie 18 : méthodes d'essai de flexion des matériaux en couche mince
- NF T56-102:1976 Elastomer or plastics based cellular products. Bending test on rigid cellular materials.
- NF C96-050-18*NF EN 62047-18:2014 Semiconductor devices - Micro-electromechanical devices - Part 18 : bend testing methods of thin film materials
- NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
- NF T47-203-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature.
- NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
- NF T47-203-2*NF EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures
- NF T47-203-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures.
American National Standards Institute （ANSI), Three-point bending test raw materials
AENOR, Three-point bending test raw materials
- UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
- UNE-EN ISO 8491:2006 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
- UNE-EN ISO 5173:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
- UNE-EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
Korean Agency for Technology and Standards (KATS), Three-point bending test raw materials
KR-KS, Three-point bending test raw materials
VN-TCVN, Three-point bending test raw materials
TH-TISI, Three-point bending test raw materials
- TIS 2173-2012 Metallic materials.bend test
- TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
- TIS 2176-2004 Torsion test for metallic wire [iso title: metallic materials.wire.simple torsion test]
- TIS 2174-2004 Reverse bend test for metallic sheet and strip 3 mm thick or less [iso title: metallic materials.sheet and strip 3 mm thick or less.reverse bend test]
CZ-CSN, Three-point bending test raw materials
ZA-SANS, Three-point bending test raw materials
IT-UNI, Three-point bending test raw materials
Japanese Industrial Standards Committee (JISC), Three-point bending test raw materials
- JIS Z 2248:2022 Metallic materials -- Bend test
- JIS Z 2248:2006 Metallic materials -- Bend test
- JIS Z 2204:1996 Bend test pieces for metallic materials
- JIS Z 2248:1996 Method of bend test for metallic materials
- JIS Z 2248 AMD 1 R:2022 Metallic materials -- Bend test (Amendment 1)
- JIS Z 2248 AMD 1:2014 Metallic materials.Bend test (Amendment 1)
- JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
- JIS Z 2274:1978 Method of rotating bending fatigue testing of metals
- JIS Z 2286:2003 Method for high temperature rotating bending fatigue testing of metallic materials
- JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
- JIS C 5630-18:2014 Semiconductor devices -- Micro-electromechanical devices -- Part 18: Bend testing methods of thin film materials
- JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature
RU-GOST R, Three-point bending test raw materials
- GOST R ISO 7438-2013 Mettallic materials. Bend test
- GOST 6806-1973 Paint and lacquer materials. Method for determination of film elasticity in bending
- GOST R 50028-1992 Rubber or plastics hoses and tubing. Bending test
- GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
- GOST R 56810-2015 Polymer composites. Test method for flexural flat samples
- GOST 28840-1990 Mashines tension, press and bending materials. General technical requirements
- GOST 26528-1998 Sintered metal materials, excluding hardmetals. Impact test method
- GOST 26528-1985 Powder materials. Impact test method
- GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
- GOST R 52764-2007 Metallic materials. Method of bend test for sheets and strips 3 mm thick and less
- GOST IEC 60811-504-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths
Taiwan Provincial Standard of the People's Republic of China, Three-point bending test raw materials
Professional Standard - Aerospace, Three-point bending test raw materials
- QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point bending test raw materials
- GB/T 232-1999 Metallic materials--Bend test
- GB/T 232-2010 Metallic materials.Bend test
- GB/T 238-2002 Metallic materials-Wire-Reverse bend test
- GB/T 238-2013 Metallic materials.Wire.Reverse bend test
- GB/T 4741-1999 Standard test method for bending strength of ceramic materials
- GB/T 32976-2016 Test method for transverse bending of tubes of metallic materials
- GB/T 4337-2008 Metallic materials.Fatigue testing.Rotating bar bending method
- GB/T 4337-2015 Metallic materials.Fatigue testing.Rotating bar bending method
- GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
- GB/T 235-2013 Metallic materials.Sheet and strip.Reverse bend test
- GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials
- GB/T 7689.4-2001 Reinforcements--Test method for woven fabrics Part 4: Determination of flexural stiffness
- GB/T 13665-2007 Test method for damping capacity of metallic damping materials Torsion pendulum method and bending vibration method
- GB/T 13665-1992 Test method for damping capacity of metallic damping materials--Torsion pendulum method and flexural resonance method
- GB/T 7689.4-2013 Reinforcements.Test method for woven fabrics.Part 4: Determination of flexural stiffness
- GB/T 235-1999 Metallic materials--Sheet and strip 3mm thick or less--Reverse bend test
Malaysia Standards, Three-point bending test raw materials
- MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending
Professional Standard - Textile, Three-point bending test raw materials
- FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
- FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites
RO-ASRO, Three-point bending test raw materials
AT-ON, Three-point bending test raw materials
- ONORM EN 10232-1994 Metallic materials. Tube (in full section). Bend test
- OENORM EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
- OENORM EN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021)
- ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)
PL-PKN, Three-point bending test raw materials
BE-NBN, Three-point bending test raw materials
- NBN-EN 10232-1994 Metallic materials. Tube (in full section). Bend test
- NBN X 07-001-1987 Classification and càlibration of material testing machines -Machines for compression, bending and tensile tests
Indonesia Standards, Three-point bending test raw materials
Professional Standard - Agriculture, Three-point bending test raw materials
- GB/T 238-1984 Test method for repeated bending of metallic materials
Professional Standard - Building Materials, Three-point bending test raw materials
- JC/T 676-1997 Test method for flexure of glass material
- JC/T 778-2010 Test method for flexural creep of glass fibre reinforced plastics sheet and sandwich construction with honeycomb core
工业和信息化部, Three-point bending test raw materials
- YB/T 4994-2022 Test method for bending properties of carbon materials
- JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature
Standard Association of Australia （SAA）, Three-point bending test raw materials
SE-SIS, Three-point bending test raw materials
ES-UNE, Three-point bending test raw materials
- UNE-EN ISO 5173:2011 ERRATUM:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
- UNE-EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023)
- UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)
Professional Standard - Ferrous Metallurgy, Three-point bending test raw materials
- YB/T 5349-2014 Metallic materials.Determination of bending mechanical porperties
IN-BIS, Three-point bending test raw materials
Professional Standard - Medicine, Three-point bending test raw materials
- YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three-point bending test raw materials
- PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
- PREN 2002-6-1999 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P2)
- PREN 2002-6-1987 Aerospace Series Test Methods for Metallic Materials Part 6 - Bend Testing (Issue P 1)
- PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P 2)
- PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
工业和信息化部/国家能源局, Three-point bending test raw materials
- JB/T 13227-2017 In-situ bending-torsion composite mechanical properties testing system for solid materials
- JB/T 13223-2017 In-situ tensile-bending composite mechanical property testing system for solid materials
- JB/T 13224-2017 In-situ tensile-bending-torsion composite mechanical property testing system for solid materials
Association of German Mechanical Engineers, Three-point bending test raw materials
- DVS 2203-5-1999 Testing of welded joints ofthermoplastics plates and tubes - Technological bend test
European Association of Aerospace Industries, Three-point bending test raw materials
- AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
- AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1
- AECMA PREN 2002-6-1987 Aerospace Series Test Methods for Metallic Materials Part 6 - Bend Testing Issue P 1
- AECMA PREN 2002-6-1999 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing Edition P2
- AECMA PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing Edition P 2
- AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
AR-IRAM, Three-point bending test raw materials
Professional Standard - Aviation, Three-point bending test raw materials
- HB 7624-1998 Bending fatigue test method for carbon fiber composite laminates
- HB 5434.6-2004 Test methods for aircraft wheel friction materials-Part 6:Test method for bend strength
- HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates
Group Standards of the People's Republic of China, Three-point bending test raw materials
- T/CSRA 12-2021 Test method for flexural properties of aramid fiber Ⅲ reinforced materials
- T/CSTM 00485-2022 Test method for flexural properties of fiber reinforced polymer matrix composite laminates
SAE - SAE International, Three-point bending test raw materials
- SAE J949-1981 Test Method for Determining Stiffness (Modulus of Bending) of Fiberboards@ Standard (August 1981)
未注明发布机构, Three-point bending test raw materials
- BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen
FI-SFS, Three-point bending test raw materials
- SFS 3362-1975 Testing of materials. Reverse bend testing of metal sfteet and strip less than 3 mm thick
- SFS 3361-1975 Testing of materia/s. Simple bend testing of metal sheet and strip less than 3 mm thick
Aerospace, Security and Defence Industries Association of Europe (ASD), Three-point bending test raw materials
- ASD-STAN PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P 2)
- ASD-STAN PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
- ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
SG-SPRING SG, Three-point bending test raw materials
- SS 5 Pt.F1-1987 Methods Of Test For Paints, Varnishes And Related Materials Part F1: Bend Test (Cylindrical Mandrel)
International Electrotechnical Commission (IEC), Three-point bending test raw materials
- IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials
BELST, Three-point bending test raw materials
- STB 1758-2007 Tribo-fatigue. Method of combined tests of the toothed gearing materials to contact and bending fatigue
GM North America, Three-point bending test raw materials
- GM GM9195P-1988 Extensibility and Warp of Vacuum Forming Material (Vacuum Forming DOT Test)
European Committee for Electrotechnical Standardization（CENELEC）, Three-point bending test raw materials
- EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
- EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
NL-NEN, Three-point bending test raw materials
- NVN-ENV 658-5-1994 Advanced technical ceramics. Mechanical properties for ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
CEN - European Committee for Standardization, Three-point bending test raw materials
- EN ISO 10619-2:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at subambient temperatures
AWS - American Welding Society, Three-point bending test raw materials
- D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)
American Welding Society (AWS), Three-point bending test raw materials
- AWS D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)