ZH
RU
ES

calibration method

calibration method, Total:221 items.

In the international standard classification, calibration method involves: Milk and milk products, Products of the chemical industry, Surface treatment and coating, Fuels, Organic chemicals, Air quality, Products of the textile industry, Construction materials, Measurement of volume, mass, density, viscosity, Edible oils and fats. Oilseeds, Linear and angular measurements, Lubricants, industrial oils and related products, Power stations in general, Inorganic chemicals, Petroleum products in general, Analytical chemistry, Farming and forestry, Metrology and measurement in general, Piezoelectric and dielectric devices, Testing of metals, Quality, Paints and varnishes, IT terminal and other peripheral equipment, Structures of buildings, Electricity. Magnetism. Electrical and magnetic measurements, Transport, Road vehicles in general, Plastics, Cereals, pulses and derived products, Railway rolling stock, Printed circuits and boards, Non-ferrous metals, Radiation measurements, Metalliferous minerals, Thermodynamics and temperature measurements, Refractories, Raw materials for rubber and plastics, Water quality, Spices and condiments. Food additives, Sensory analysis, Test conditions and procedures in general, Crude petroleum, Terminology (principles and coordination), Materials and articles in contact with foodstuffs.

ZA-SANS, calibration method

SANS 315:2005 Milk - Determination of fat content - Gravimetric method (Reference method)
SANS 318:2005 Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)

National Metrological Technical Specifications of the People's Republic of China, calibration method

JJF(航空) 030-1987 Calibration method of three-coordinate measuring machine

Professional Standard - Petroleum, calibration method

SY/T 6193-1996 Calibration method of recoverable reserves in heavy oil steam injection development

American Society for Testing and Materials (ASTM), calibration method

ASTM E2966-14 Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
ASTM C1203-04 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM E1228-23 Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure
ASTM C1203-91(1996) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM C1203-04(2014) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM C1203-04(2019) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM D629-99 Standard Test Methods for Quantitative Analysis of Textiles
ASTM D5770-11(2017) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM E1584-23 Standard Test Method for Assay of Nitric Acid
ASTM D4530-06e1 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-15(2020) Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-15 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM E1569-93(1998) Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM D629-08 Standard Test Methods for Quantitative Analysis of Textiles
ASTM D629-15 Standard Test Methods for Quantitative Analysis of Textiles
ASTM E371-99 Standard Test Method for the Determination of Boron in Ferroboron
ASTM E45-05e3 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM D7637-10 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM A630-16a Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16ae1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM D3133-01 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D3133-01(2005) Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D8052/D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM D8052/D8052M-22 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM E45-18 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
ASTM B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM E1569-03 Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM E45-97e2 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E45-18a Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E45-18a(2023) Standard Test Methods for Determining the Inclusion Content of Steel
ASTM D4530-00 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-03 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-06 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
ASTM D6505-00(2006) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D6505-00 Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D7959-15 Standard Test Method for Chloride Content Determination
ASTM D1603-11 Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM E2966-14(2019) Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
ASTM D6505-00(2022) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D4530-07 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM C1356-07 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM C1356-07(2012) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E45-97(2002) Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E1615-05 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-04 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-00 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-16 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-08 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
ASTM E81-96(2007) Standard Test Method for Preparing Quantitative Pole Figures
ASTM E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures
ASTM C1068-03 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM E1771-95(2001) Standard Test Method for Determination of Copper in Anode and Blister Copper
ASTM D5228-92(2000) Standard Test Method for Determination of the Butane Working Capacity of Activated Carbon
ASTM C1068-03(2011) Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM E1771-95 Standard Test Method for Determination of Copper in Anode and Blister Copper
ASTM E2575-08 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys
ASTM E1600-23 Standard Test Methods for Determination of Gold in Cyanide Solutions
ASTM C1171-96 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM C1171-96(2003) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM C1171-16 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM D6869-03(2011) Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D4574-02 Standard Test Methods for Rubber Chemicals8212;Determination of Ash Content
ASTM C1068-21 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM E1615-22 Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry
ASTM D5412-93(2005) Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D5412-93(2011) Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D5412-93(2011)e1 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM E1083-00(2006) Standard Test Method for Sensory Evaluation of Red Pepper Heat
ASTM E1083-00 Standard Test Method for Sensory Evalution of Red Pepper Heat
ASTM E1083-00e1 Standard Test Method for Sensory Evalution of Red Pepper Heat
ASTM E45-05e1 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E45-05 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E45-11 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E45-11a Standard Test Methods for Determining the Inclusion Content of Steel
ASTM D6505-00(2012) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM E45-13 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM D6505-00(2017) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D4929-19a Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM C1068-96e1 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C1096-91(1999) Standard Test Method for Determination of Wood Fiber in Asbestos Cement
ASTM C1096-91(2004) Standard Test Method for Determination of Wood Fiber in Asbestos Cement
ASTM A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D3192-09 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
ASTM D4929-19 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM E1534-93(2013) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM D7771-17a(2022) Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black
ASTM D4929-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM C1096/C1096M-07(2011)e1 Standard Test Method for Determination of Wood Fiber in Asbestos Cement
ASTM D4929-07(2014) Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D6697-01 Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water
ASTM E394-00(2004) Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM E394-00 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM E394-22 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM E394-15 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM E394-09 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D7637-10(2021) Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM D7637-10(2015) Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM D5412-93(2000) Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM F1308-98(2023) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
ASTM D5412-93(2017)e1 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM E3363-23 Standard Test Method for Quantitative Performance Evaluation of Antimicrobial Towelettes

RU-GOST R, calibration method

GOST R 56885-2016 Biomass. Determination of total amount of solids by standard method
GOST R 56881-2016 Biomass. Determination of the ash content by standard method
GOST R 56717-2015 Air quality. Stationary source emission. Guidelines for the elaboration of methods of measurement
GOST 8.400-1980 State system for ensuring the uniformity of measurements. Standard metallic gauges. Calibration methods
GOST 28238-1989 Sunflower. Method for determination of oleic acid mass fraction according to the oil refraction index
GOST R 8.675-2009 State system for ensuring the uniformity of measurements. Electromagnetic flowmeter. Salibration methods
GOST R ISO 17258-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Benchmarking
GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 8.235-1977 State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification
GOST 32206-2013 Special railway rolling stock. Outdoor noise. Measuring standards and methods of determination
GOST R 56886-2016 Wood Fuels. Determination of moisture content by standard method
GOST R 56888-2016 Wood Fuel. Determination of ash content by standard method
GOST R 56883-2016 Biomass. Determination of bulk density by standard method
GOST R ISO 13053-1-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Part 1. DMAIC methodology
GOST R ISO 13053-2-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Part 2. Techniques
GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R 56882-2016 Biomass. Determination of acid insoluble residue by standard method

VN-TCVN, calibration method

TCVN 2370-1987 Raw silk.Method for determination of standard mass
TCVN 6910-4-2001 Accuracy (trueness and precision) of measurement methods and results.Part 4: Basic methods for the determination of the trueness of a standard measurement method
TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., calibration method

IEEE 177-1966 STANDARD DEFINITIONS AND METHODS OF MEASUREMENT FOR PIEZOELECTRIC VIBRATORS

Association Francaise de Normalisation, calibration method

XP CEN/TS 15674:2008 Qualité de l'air - Mesures des émissions de sources fixes - Lignes directrices pour l'élaboration de méthodes normalisées
XP X43-378*XP CEN/TS 15674:2008 Air Quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
NF X43-351*NF EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury.
NF X06-041-4*NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
NF EN 15853:2010 Qualité de l'air ambiant - Méthode normalisée pour la détermination des dépôts de mercure
NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
XP ISO/TS 16393:2019 Analyse de biomarqueurs moléculaires - Détermination des caractéristiques de performance des méthodes de mesure qualitatives et validation des méthodes

Association of German Mechanical Engineers, calibration method

VDI 2449 Blatt 3-2001 Measurement methods test criteria - General method for the determination of the uncertainty of calibratable measurement methods

Danish Standards Foundation, calibration method

DS/CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DS/ISO 5725-5/Corr. 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
DS/EN 61191-6:2010 Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method
DS/EN 15853:2010 Ambient air quality - Standard method for the determination of mercury deposition
DS/ISO 5725-2:1995 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

AENOR, calibration method

UNE-CEN/TS 15674:2009 EX Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.
UNE-EN 15853:2010 Ambient air quality - Standard method for the determination of mercury deposition
UNE 82009-2:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD.

API - American Petroleum Institute, calibration method

API MPMS 4.9.1-2005 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers (First Edition)

AASHTO - American Association of State Highway and Transportation Officials, calibration method

TP 72-2008 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)
T 362-2016 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)

Group Standards of the People's Republic of China, calibration method

T/CCAS 025-2022 Method for determination of net mass of China ISO standard sand
T/SDAS 645-2023 Lutein Content Index and Determination Method in Wheat
T/GDPCIA 002-2019 Information technology — Office equipment — Method for the determination of declared yield for toner cartridge
T/CI 003-2022 Index and determination method of phytic acid content in low phytic acid wheat variety
T/SMA 0007-2020 Evaluation Method of Measurement Uncertainty of Variable Head Water Flow Standard Device

German Institute for Standardization, calibration method

DIN CEN/TR 17911:2023-06 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023
DIN EN 15852:2010-11 Ambient air quality - Standard method for the determination of total gaseous mercury; German version EN 15852:2010
DIN CEN/TS 17812:2022-09 Determination of the acoustic properties of markings - The CPX measurement method; German version CEN/TS 17812:2022
DIN ISO 5725-5:2002-11 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN EN 12341:2014-08 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2014 / Note: To be replaced by DIN EN 12341 (2022...
DIN EN 12341:2022-06 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German and English version prEN 12341:2022 / Note: Date of issue 2022-05-...
DIN EN 15853:2010-11 Ambient air quality - Standard method for the determination of mercury deposition; German version EN 15853:2010

ES-UNE, calibration method

UNE-CEN/TR 17911:2023 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content (Endorsed by Asociación Española de Normalización in March of 2023.)

American Society of Mechanical Engineers (ASME), calibration method

ASME B89.1.12M-1990 Methods for performance evaluation of coordinate measuring machines

Professional Standard - Electricity, calibration method

DL/T 1002-2006 Calibration for low-level dissolved oxygen meter.standard gases calibration

Military Standard of the People's Republic of China-General Armament Department, calibration method

GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system

TR-TSE, calibration method

TS 2185-1976 STANDARD DEFINITIONS AND METHODS OF MEASUREMENT FOR PIEZOELECTRIC VIBRATORS OPERATING ?VER THE FREOJJENCY RANGE UP TO 30 MHz

Professional Standard - Electron, calibration method

SJ/Z 9157-1987 Standard definition and method for measurement of piezoelectric vibrator operating in a frequency up to 30MHz

European Committee for Standardization (CEN), calibration method

EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
CEN/TS 17812:2022 Determination of the acoustic properties of markings - The CPX measurement method

British Standards Institution (BSI), calibration method

BS EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS ISO 13053-2:2011 Quantitative methods in process improvement. Six Sigma. Tools and techniques
PD CEN/TR 17911:2023 Stationary source emissions. Guideline for the elaboration of standardized measurement methods. Recommendations for the structure and content
PD CEN/TS 17812:2022 Determination of the acoustic properties of markings. The CPX measurement method
BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS EN 15853:2010 Ambient air quality - Standard method for the determination of mercury deposition
19/30329303 DC BS ISO 5725-4. Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
PD ISO/TS 16393:2019 Molecular biomarker analysis. Determination of the performance characteristics of qualitative measurement methods and validation of methods

American National Standards Institute （ANSI), calibration method

ASTM D5770-23 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing (Standard + Redline PDF Bundle)

Japanese Industrial Standards Committee (JISC), calibration method

JIS Z 8402-5:2002 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method

Professional Standard - Agriculture, calibration method

NY/T 208.1-1992 Quality index of promotion and identification method for agricultural diesel engine

交通运输部, calibration method

JT/T 1363-2020 Coastal navigation mark maintenance quality requirements and assessment methods

International Electrotechnical Commission (IEC), calibration method

IEC 60302:1969 Standard definitions and methods of measurement for piezoelectric vibrators operating over the frequency range up to 30 MHz

CY-CYS, calibration method

CYS 145 Pt.4 Method 401-1985 Cyprus Standard METHOD OF DETERMINATION OF CARBON BLACK CONTENT OF POLYOLEFIN COMPOUNDS

International Organization for Standardization (ISO), calibration method

ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO/AWI 5725-5 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/CD 5725-5:2023 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO Guide 4:1975 Preparation of standard methods of measuring performance of consumer goods (SMMP)
ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

KR-KS, calibration method

KS A ISO 5725-4-2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-2-2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

IT-UNI, calibration method

UNI ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

Korean Agency for Technology and Standards (KATS), calibration method

KS A ISO 5725-4:2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-2:2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, calibration method

GB/T 6379.4-2006 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
GB/T 6379.5-2006 Accuracy (trueness and precision)of measurement methods and results-Part 5:alternative methods for the determination of the precision of a standard measurement method
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method

The American Road & Transportation Builders Association, calibration method

AASHTO T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
AASHTO T 291-1994(R 2018) Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
AASHTO T 290-1995 Standard Method of Test for Determining Water-Soluble Sulfate Ion Content in Soil

Jilin Provincial Standard of the People's Republic of China, calibration method

DB22/T 2285-2015 Yield Identification Method of Peanut Varieties Photosynthetic Index Method

European Committee for Electrotechnical Standardization（CENELEC）, calibration method

EN 61191-6:2010 Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method

KE-KEBS, calibration method

KS 05-33 Pt.1-2-1977 KENYA STANDAfiD DETERMINATION OF THE PRESENCE OF PRESERVATIVES AND PESTICIDE RESIDUES IN DAIRY PRODUCTS

Lithuanian Standards Office , calibration method

LST EN 15853-2010 Ambient air quality - Standard method for the determination of mercury deposition

PK-PSQCA, calibration method

PS 1554-1982 PAKISTAN STANDARD METHOD FOR THE DETERMI-NATION OF ACID CONTENT IN WOOL