ZH
RU
ES

Calibration amount

Calibration amount, Total:353 items.

In the international standard classification, Calibration amount involves: Installations in buildings, Equipment for petroleum and natural gas industries, Earth-moving machinery, Medical equipment, Milk and milk products, Internal combustion engines, Paints and varnishes, Industrial trucks, Products of the chemical industry, Laboratory medicine, Surface treatment and coating, Radiation measurements, Textile fibres, Test conditions and procedures in general, Air quality, Fuels, Inland navigation vessels, Astronomy. Geodesy. Geography, Farming and forestry, Vocabularies, Transport, Nuclear energy engineering, Analytical chemistry, Diagnostic, maintenance and test equipment, Gas and steam turbines. Steam engines, Quality, Products of the textile industry, Edible oils and fats. Oilseeds, Terminology (principles and coordination), Earthworks. Excavations. Foundation construction. Underground works, Lubricants, industrial oils and related products, Ground service and maintenance equipment, Microbiology, Photography, Services, Measurement of volume, mass, density, viscosity, Hydraulic construction, Sensory analysis, Non-destructive testing, Linear and angular measurements, Cans. Tins. Tubes, Tobacco, tobacco products and related equipment, Construction industry, Inks. Printing inks, Jewellery, Inorganic chemicals, Construction materials, Biology. Botany. Zoology, Sociology. Demography, Aids for disabled or handicapped persons, Construction of waterways and ports, Law. Administration, General methods of tests and analysis for food products, Power stations in general, Telecommunication systems, Lamps and related equipment, Wood, sawlogs and sawn timber, Hydraulic energy engineering, Road vehicles in general, Equipment for entertainment, Measurement of time, velocity, acceleration, angular velocity, Metrology and measurement in general, Petroleum, petroleum products and natural gas handling equipment, Water quality, Testing of metals, Road vehicle systems, Company organization and management, Road engineering.


Association Francaise de Normalisation, Calibration amount

  • NF D10-301:1959 SANITARY APPLIANCES. SPECIFICATION FOR HIGH FLUSHING WC CISTERNS WITH NOMINAL CAPACITY OF 10 LITRES.
  • NF C74-212/A1:2001 Radiotherapy equipment - Coordinates, movements and scales.
  • NF C74-212*NF EN 61217:2012 Radiotherapy equipment - Coordinates, movements and scales
  • NF C74-212:1997 Radiotherapy equipment coordinates, movements and scales.
  • NF T30-122:1974 Paints. Determination of dry film thickness. Dial gauge method.
  • NF X43-324-3*NF EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3 : identification and quantification of PCDDs/PCDFs
  • XP CEN/TS 15674:2008 Qualité de l'air - Mesures des émissions de sources fixes - Lignes directrices pour l'élaboration de méthodes normalisées
  • XP X43-378*XP CEN/TS 15674:2008 Air Quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
  • NF X50-805*NF EN 13816:2002 Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • NF X31-071:1983
  • NF EN 13027:2001 Emballage - Emballages métalliques légers - Boîtes rondes serties définies par leur capacité nominale totale
  • NF P98-627:1991 Horizontal road marking. Markings applied on the roads. Organic chlorine determination.
  • NF A70-010*NF EN 28653:1993 Jewellery. Ring-sizes. Definition, mesurage et designations.
  • XP B53-625*XP CEN/TS 12169:2008 Criteria for the assessment of conformity of a lot of sawn timber
  • NF A09-252-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control.
  • NF EN ISO 14096-1:2020 Essais non destructifs - Qualification des systèmes de numérisation des films radiographiques - Partie 1 : définitions, mesures quantitatives des paramètres de qualité d'image, film de référence normalisé et contrôle qualitatif

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calibration amount

  • GB/T 17290-1998 Petroleum measurement systems--Calibration--Temperature corrections for use with volumetric reference measuring systems
  • GB/T 21406-2008 Internal combustion engines.Engine weight(mass)declaration
  • GB/T 25689-2010 Earth-moving machinery.Dumper bodies.Volumetric rating
  • GB/T 25690-2010 Earth-moving machinery.Elevating scrapers.Volumetric ratings
  • GB/T 25691-2010 Earth-moving machinery.Open bowl scraper.Volumetric rating
  • GB/T 19911-2005 Shipbuilding-Inland navigation-Bucket dredgers- Scale of bucket capacities
  • GB/T 19996-2005 Standard for quality assessment of published mapping products
  • GB/T 18820-2011(英文版) General principles of stipulation of water intake norm for industrial product
  • GB/T 21942-2008 Earth-moving machinery-Loader and front loading excavator buckets-Volumetric ratings
  • GBJ 301-1988 Standard for quality inspection and assessment of buiding construction
  • GB/T 21937-2008 Earth-moving machinery.Crawler and wheel tractor dozer blades.Volumetric ratings
  • GB/T 9109.4-1988 Dynamic measurement of crude oil--The operating stipulations of verificating positive displacement meters by pipe prover

RO-ASRO, Calibration amount

  • STAS 7170-1987 Metrology STANDARDIZED BLOCKS FOR HARDNliSS DKTER.MINATION Technical and meltrologycal requirements Calibralion
  • STAS 2880-1984 CALIBRATED STEELS General technical requirements lor quality
  • STAS 3446/2-1976 Land surveys PREFABRICATED CONCRET]-: POSTS FOR TI Iii MATERIAL IZA- TION OF TOPOGRAPHICAL NETWORKS

National Metrological Technical Specifications of the People's Republic of China, Calibration amount

  • JJF 1251-2010 Calibration Specification for Measuring System of Coordinate Position
  • JJF(航空) 030-1987 Calibration method of three-coordinate measuring machine
  • JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway
  • JJF(烟草) 3.1-2008 Evaluation of Uncertainty in Measurement for Parameter of Physical Characteristics of Cigarette Paper.Part 1: Grammage Weight
  • JJF(烟草)3.1-2008 Guidelines for the Evaluation of Uncertainty in Measurement of Physical Properties of Cigarette Paper Part 1: Quantitative
  • JJF(烟草)2.1-2008 Evaluation of Uncertainty in Measurment for Parameter of Physical Characteristics of Cigarettes—Part 1:Mass
  • JJF(烟草) 2.1-2008 Guidelines for the Evaluation of Uncertainty in Measurement of Physical Indexes of Cigarettes - Part 1 Quality
  • JJF(纺织) 034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester.Capacitance Method
  • JJF(纺织)034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester—Capacitance Method
  • JJF(纺织) 034-2006 Calibration specification for measurement verification standard of capacitive dryness meter
  • JJF(烟草) 2.3-2008 Evaluation of Uncertainety in Measurment for Parameter of Physical Characteristics of Cigarettes—Part 3:Draw Resistance
  • JJF(烟草) 2.4-2008 Evaluation of Uncertainty in Measurement for Parameter of Physical Characteristics of Cigarettes.Part 4: Hardness
  • JJF(烟草)2.3-2008 Evaluation of Uncertainety in Measurment for Parameter of Physical Characteristics of Cigarettes—Part 3:Draw Resistance
  • JJF(烟草)2.4-2008 Guidelines for the Evaluation of Uncertainty in the Measurement of Cigarette Physical Parameters Part 4: Hardness

Professional Standard - Construction Industry, Calibration amount

Professional Standard - Machinery, Calibration amount

ZA-SANS, Calibration amount

  • SANS 315:2005 Milk - Determination of fat content - Gravimetric method (Reference method)
  • SANS 318:2005 Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)

British Standards Institution (BSI), Calibration amount

  • BS ISO 7507-1:2004 Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Strapping method
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • BS EN 13816:2002 Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement
  • BS EN 14096-1:2003(2008) Non-destructive testing - Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
  • BS EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
  • BS ISO TR 11776:1992 Light gauge metal containers. Non-round open-top cans. Cans defined by their nominal capacities
  • DD CEN/TS 12169:2008 Criteria for the assessment of conformity of a lot of sawn timber
  • BS PD ISO/TS 21002:2021 Road vehicles. Multidimensional measurement and coordinate systems definition
  • PD ISO/TS 21002:2021 Road vehicles. Multidimensional measurement and coordinate systems definition
  • BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS AU 88a:1985 Recommendations for ratings for light duty cables for automobile use
  • BS ISO/ASTM 52628:2020 Standard practice for dosimetry in radiation processing

AASHTO - American Association of State Highway and Transportation Officials, Calibration amount

  • PP 97-2019 Standard Recommended Practice for Determination of Constant Mass
  • TP 72-2008 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)
  • T 362-2016 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)

AT-ON, Calibration amount

  • ONORM M 1383-1989 Coordinate metrology; uncertainty of measurement
  • ONORM ISO 7451:1985 Earth-moving machinery; Hydraulic excavators; Volumetrie rating for hoe type buckets
  • ONORM ISO 7546:1984 Earth-moving machinery; loader and front loading excavator buckets; Volumetrie rating

Danish Standards Foundation, Calibration amount

  • DS 905:1996 Truck - Nominal and rated capacity - Definition
  • DS 905:1983 Truck. Nominal and rated capacity. Definition
  • DS/EN 13816:2002 Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement
  • DS/CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
  • DS/EN 28 653:1993 Jewellery - Ring-sizes - Definition, measurement and designation
  • DS/CEN/TS 12169:2008 Criteria for the assessment of conformity of a lot of sawn timber

American Society for Testing and Materials (ASTM), Calibration amount

  • ASTM E2966-14 Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
  • ASTM C1203-04 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
  • ASTM D2118-96(2005) Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its'' Products
  • ASTM D2118-05 Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its'' Products
  • ASTM D2118-05(2009) Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its'' Products
  • ASTM D6259-15(2019) Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
  • ASTM E1026-04e1 Standard Practice for Using the Fricke Reference-Standard Dosimetry System
  • ASTM E1026-04 Standard Practice for Using the Fricke Reference Standard Dosimetry System
  • ASTM E2111-12(2018) Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
  • ASTM C1203-91(1996) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
  • ASTM C1203-04(2014) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
  • ASTM C1203-04(2019) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
  • ASTM E2111-12 Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
  • ASTM D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
  • ASTM D629-99 Standard Test Methods for Quantitative Analysis of Textiles
  • ASTM ISO/ASTM 51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
  • ASTM D5770-11(2017) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
  • ASTM E2111-00 Standard Quantitative Carrier Test Method To Evaluate the Bactericidal, Fungicidal, Mycobactericidal and Sporicidal Potencies of Liquid Chemical Germicides
  • ASTM E2111-05 Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemical Microbicides
  • ASTM E2197-17e1 Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
  • ASTM C1005-10 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
  • ASTM E1655-04 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1655-05 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM F2406-04 Standard Practice for Determining Yield of Solid Ink Sticks
  • ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM ISO/ASTM 51900-23 Standard Guidance for Dosimetry for Radiation Research
  • ASTM ISO/ASTM51900-23 Standard Guidance for Dosimetry for Radiation Research
  • ASTM E1584-23 Standard Test Method for Assay of Nitric Acid
  • ASTM F2217-02(2007) Standard Practice for Coating/Adhesive Weight Determination
  • ASTM E1569-93(1998) Standard Test Method for Determination of Oxygen in Tantalum Powder
  • ASTM F2217-02 Standard Practice for Coating/Adhesive Weight Determination
  • ASTM F2035-00(2011) Standard Practice for Measuring the Dark Stability of Ink Jet Prints
  • ASTM C1005-00 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
  • ASTM F3518-21 Standard Guide for Quantitative Measures for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
  • ASTM E2197-17 Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
  • ASTM E1189-00(2016) Standard Specification for Micro-Burets (Koch Style)
  • ASTM E1189-00(2005) Standard Specification for Micro-Burets (Koch Style)
  • ASTM E170-14a Standard Terminology Relating to Radiation Measurements and Dosimetry
  • ASTM E170-15a Standard Terminology Relating to Radiation Measurements and Dosimetry
  • ASTM E170-99e1 Standard Terminology Relating to Radiation Measurements and Dosimetry
  • ASTM D629-08 Standard Test Methods for Quantitative Analysis of Textiles
  • ASTM F2217/F2217M-13(2018) Standard Practice for Coating/Adhesive Weight Determination
  • ASTM D629-15 Standard Test Methods for Quantitative Analysis of Textiles
  • ASTM E2548-07 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
  • ASTM E2548-11e1 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
  • ASTM E170-10 Standard Terminology Relating to Radiation Measurements and Dosimetry
  • ASTM E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM D6259-23 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
  • ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
  • ASTM A630-16a Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
  • ASTM ISO/ASTM 51940-22 Standard Guidance for Dosimetry for Sterile Insect Release Programs
  • ASTM D3731-20 Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
  • ASTM A630-16ae1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
  • ASTM ISO/ASTM51940-22 Standard Guidance for Dosimetry for Sterile Insect Release Programs
  • ASTM D7755-11(2022) Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D6512-07 Standard Practice for Interlaboratory Quantitation Estimate
  • ASTM E371-99 Standard Test Method for the Determination of Boron in Ferroboron
  • ASTM E1927-98(2023) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
  • ASTM D6512-07(2014) Standard Practice for Interlaboratory Quantitation Estimate
  • ASTM F2406-04(2012) Standard Practice for Determining Yield of Solid Ink Sticks
  • ASTM E45-05e3 Standard Test Methods for Determining the Inclusion Content of Steel
  • ASTM ISO/ASTM51939-17(2022) Standard Practice for Blood Irradiation Dosimetry
  • ASTM D8052/D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
  • ASTM D8052/D8052M-22 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies

Professional Standard - Medicine, Calibration amount

  • YY/T 1252-2015 Total IgE quantitative labelling immunoassay kit
  • YY/T 1250-2014 Insulin quantitative labelling immunoassay kit
  • YY/T 1516-2017 Prolactin quantitative labelling immunoassay kit
  • YY/T 1175-2010 Quantitative detection reagent (kit) for tumor markers.Chemiluminescent immunoassay
  • YY/T 1216-2013 Alpha-fetoprotein quantitative labelling immunoassay kit
  • YY/T 1223-2014 Totle T4 quantitative labelling immunoassay kit
  • YY/T 1218-2013 Thyroid-stimulating hormone quantitative labelling immunoassay kit
  • YY/T 1213-2013 Follicle stimulating hormone quantitative labelling immunoassay kit
  • YY/T 1217-2013 Luteinizing hormone quantitative labelling immunoassay kit
  • YY/T 1222-2014 Totle T3 quantitative labelling immunoassay kit
  • YY/T 1214-2013 Human chorionic gonadotrophin quantitative labelling immunoassay kit
  • YY/T 1249-2014 Free prostate specific antigen quantitative labelling immunoassay kit
  • YY/T 1262-2015 Neuron specific enolase quantitative labelling immunoassay kit
  • YY/T 1442-2016 β<下标2>-Microglobulin quantitative detection reagents(kit)

Korean Agency for Technology and Standards (KATS), Calibration amount

  • KS B ISO 6483:2015 Earth-moving machinery — Dumper bodies — Volumetric rating
  • KS B ISO 6483:2005 Earth-moving machinery-Dumper bodies-Volumetric rating
  • KS B ISO 6485:2015 Earth-moving machinery — Tractor-scraper — Volumetric rating
  • KS B ISO 6485:2005 Earth-moving machinery-Tractor-scraper-Volumetric rating
  • KS B ISO 14096-1:2007 Non-destructive testing－Qualification of radiographic film digitisation systems－Part 1：Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
  • KS B ISO 14096-1-2007(2022) Non-destructive testing－Qualification of radiographic film digitisation systems－Part 1：Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative contr
  • KS B ISO 14096-1-2007(2017) Non-destructive testing－Qualification of radiographic film digitisation systems－Part 1：Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative contr
  • KS B ISO 19232-1:2021 Non-destructive testing — Image quality of radiographs —Part 1: Determination of the image quality value using wire-type image quality indicators
  • KS D ISO TR 11776-2004(2014) Light gauge metal containers－Non－round open－top cans－Cans defined by their nominal capacities
  • KS C 7605-2020 Photometric measurement on standard fluorescent lamps
  • KS C 7605-1982 Photometric measurement on standard fluorescent lamps
  • KS I ISO 6145-2-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
  • KS B ISO 19232-2:2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators

International Organization for Standardization (ISO), Calibration amount

  • ISO 6483:1980 Earth-moving machinery; Dumper bodies; Volumetric rating
  • ISO/ASTM 51631:2002 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
  • ISO/ASTM 51631:2003 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
  • ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations
  • ISO 6484:1986 Earth-moving machinery; Elevating scrapers; Volumetric ratings
  • ISO 6485:1980 Earth-moving machinery; Tractor-scraper volumetric rating
  • ISO 4269:2001 Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters
  • ISO 6483:1980/Cor 1:1994 Earth-moving machinery - Dumper bodies - Volumetric rating; Technical Corrigendum 1
  • ISO 14096-1:2005 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
  • ISO 7546:1983 Earth-moving machinery; Loader and front loading excavator buckets; Volumetric ratings
  • ISO 9246:1988 Earth-moving machinery; crawler and wheel tractor dozer blades; volumetric ratings
  • ISO 8653:2016 Jewellery - Ring-sizes - Definition, measurement and designation
  • ISO 8653:1986 Jewellery; Ring-sizes; Definition, measurement and designation
  • ISO/TS 21002:2021 Road vehicles - Multidimensional measurement and coordinate systems definition

API - American Petroleum Institute, Calibration amount

  • API MPMS 4.9.1-2005 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers (First Edition)

机械电子工业部, Calibration amount

German Institute for Standardization, Calibration amount

  • DIN EN 1948-3:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs English version of DIN EN 1948-3:2006-06
  • DIN EN ISO 19232-1:2013-12 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013); German version EN ISO 19232-1:2013
  • DIN CEN/TR 17911:2023-06 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023
  • PAS 1072-2007 Criteria for determining the quality of interpersonal communication and measurement/assessment procedures
  • DIN EN ISO 14096-1:2020-10 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005); German version EN ISO 14...
  • DIN EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control; German version EN 14096-1:2003
  • DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
  • DIN EN ISO 19232-2:2013-12 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013); German version EN ISO 19232-2:2013
  • DIN EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter; German version EN 12341:2014
  • DIN EN 13816:2002 Transportation - Logistics and services - Public passenger transport; Service quality definition, targeting and measurement; German version EN 13816:2002

National Metrological Verification Regulations of the People's Republic of China, Calibration amount

  • JJG 643-2003 Flow Standard Facilities by Master Meter Method
  • JJG 20-2001 Verification Regulation of Standard Capacity Measures(glass)
  • JJG 259-1989 Verification Regulation of Standard Metal Tank
  • JJG(船舶) 13-1996 Verification Regulations for Target Trajectory Measuring Instrument
  • JJG 794-1992 Verification Regulation of Standard Facility for Air Delivery
  • JJG 872-1994 Verification Regulation of Standard Measuring Coils of Magnetic Flux
  • JJG(纺织) 044-1991 Verification Regulations for Capacitive Evenness Meter Metrology Verification Standard Device
  • JJG 164-2000 Verification Regulation of Standard Facilities for Liquid Flowrate
  • JJG(邮电) 016-1992 Specification for verification of scalar quantity network analyzers
  • JJG 887-2014 Standard Tapered Roller Tester
  • JJG 887-1995 Verification Regulation of Standard Tapered Roller Tester
  • JJG 2006-1996 Verification Scheme for Measuring Instruments of Hardness Testing on Shore Scale D
  • JJG 1088-2013 Verification Regulation of Standard Devices for Calibration of Ophthalmometers

RU-GOST R, Calibration amount

  • GOST R 56885-2016 Biomass. Determination of total amount of solids by standard method
  • GOST R 56881-2016 Biomass. Determination of the ash content by standard method
  • GOST 28238-1989 Sunflower. Method for determination of oleic acid mass fraction according to the oil refraction index
  • GOST R 56717-2015 Air quality. Stationary source emission. Guidelines for the elaboration of methods of measurement
  • GOST 8.400-1980 State system for ensuring the uniformity of measurements. Standard metallic gauges. Calibration methods
  • GOST 18848-1973 Vegetable oils. Quality indices. Terms and definitions
  • GOST EN 13804-2013 Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
  • GOST R 55955-2014 Standard practice for determination of gas content of coal
  • GOST R 8.675-2009 State system for ensuring the uniformity of measurements. Electromagnetic flowmeter. Salibration methods

Professional Standard - Petroleum, Calibration amount

  • SY/T 6193-1996 Calibration method of recoverable reserves in heavy oil steam injection development
  • SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
  • SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices

国家食品药品监督管理局, Calibration amount

FI-SFS, Calibration amount

中华人民共和国国家卫生和计划生育委员会, Calibration amount

  • GB 17022-1997 Criteria for quality assessment of field semi-quantitative test kit of salt iodine

SE-SIS, Calibration amount

  • SIS SMS 2231-1973 Gas cylinders for medical use Marking for Identification of the contents
  • SIS SS 02 01 70-1985 Measurement and calibration systems — Specification of system requirements
  • SIS SMS 2230-1973 Gas cylinders for industrial use Marking for Identification of the contents
  • SIS SMS 2231-1965 Gas cylinders for medical gases. Marking for identification of the contents

Professional Standard - Surveying and Mapping, Calibration amount

  • CH 1003-1995 Standard for quality assessment of surveying and mapping products
  • CHB 8.1-1996　 Standards for quality assessment of marine survey results

Group Standards of the People's Republic of China, Calibration amount

  • T/DALN 011-2021 Quality assessment standard for oat silage
  • T/CADBM 9-2019 Quality assessment standard for glass thermal insulation coatings
  • T/DALN 010-2021 Quality assessment standard for alfalfa silage
  • T/SMA 0007-2020 Evaluation Method of Measurement Uncertainty of Variable Head Water Flow Standard Device
  • T/CWHIDA 0001-2017 Standard for quality evaluation on design of water resources and hydropower project
  • T/CCPEF 068-2020 Evaluation Criteria for High Quality Development of Mining Industry
  • T/CCAS 025-2022 Method for determination of net mass of China ISO standard sand
  • T/SRA 002-2019 Standards for Quality Assurance of Human Adipose-derived Mesenchymal Stem Cells
  • T/SRA 003-2019 Standards for Quality Assurance of Human Umbilical Cord Mesenchymal Stem Cells
  • T/SHSFJD 1101-2021 Judicial Appraisal Standards for Construction Engineering Quality
  • T/GDNB 71.6-2021 The whole industry chain standard system of Guangdong characteristic agricultural products Pineapple-General rules for quality evaluation
  • T/ZGZS 10701-2017 Classification and quality evaluation standard for end-of-life vehicle parts
  • T/GAC 5-2019 Jewelry-Bracelet-size of definition, measurement designation
  • T/DAHEB 003-2018 Quality assessment standard for whole plant corn silage in Hebei Province (Trial)
  • T/DALN DALN001-2018 Quality assessment standard for whole plant corn silage in Liaoning Province (Trial)
  • T/DALN 001-2019 Liaoning Province Fresh Milk Bar Raw Milk Quality Evaluation Standard (Trial)
  • T/SDAS 645-2023 Lutein Content Index and Determination Method in Wheat

European Committee for Standardization (CEN), Calibration amount

  • EN 13816:2002 Transportation - Logistic and services - Public passenger transport; Service quality definition, targeting and measurement
  • EN 13798:2002 Hydrometry - Specification for a reference raingauge pit
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
  • EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter

Professional Standard - Nuclear Industry, Calibration amount

  • EJ/T 826-1994 Specifications for the design of the calibration shed for gamma measuring instruments in uranium mines
  • EJ/T 911-1994 Volumetric Method for Determination of Silicon in U3Si2

American National Standards Institute （ANSI), Calibration amount

  • ANSI N13.35-2009 Specifications for the Bottle Manikin Absorption Phantom
  • ANSI N13.41-2011 Criteria for Performing Multiple Dosimetry
  • ASTM D5770-23 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing (Standard + Redline PDF Bundle)
  • ANSI/IEEE 1139:2008 Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology - Random Instabilities

U.S. Military Regulations and Norms, Calibration amount

Society of Automotive Engineers (SAE), Calibration amount

Lithuanian Standards Office , Calibration amount

  • LST EN 13816-2002 Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement
  • LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

AENOR, Calibration amount

  • UNE-EN 13816:2003 Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement.
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • UNE-CEN/TS 15674:2009 EX Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
  • UNE-CEN/TS 12169:2009 EX Criteria for the assessment of conformity of a lot of sawn timber
  • UNE 30001:1957 CHEMICAL PRODUCTS. CLASSIFICATION BY QUALITIES, DEFINITIONS AND STANDARDIZATION.

VN-TCVN, Calibration amount

Military Standard of the People's Republic of China-General Armament Department, Calibration amount

  • GJB 3153-1998 Precision measurement radar calibration and correction
  • GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density
  • GJB/J 3607-1999 Large quality standard system verification procedures
  • GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system

Guangdong Provincial Standard of the People's Republic of China, Calibration amount

  • DB44/T 86-2005 Second of automobile maintains the criteria for evaluation of quality
  • DB4403/T 116-2020 Shenzhen Mayor Quality Award Evaluation Criteria (Economic Category)

CU-NC, Calibration amount

  • NC 20-02-1968 Guide for the elaboration of quality standards for chemical producis
  • NC 99-48-1987 Computing. Reparation and Maintenance Quality Indexes Terms, Definitions and Symbols

Henan Provincial Standard of the People's Republic of China, Calibration amount

  • DB41/T 1488-2017 Appearance quality assessment standard for water conservancy projects

Jiangsu Provincial Standard of the People's Republic of China, Calibration amount

  • DB32/T 4063-2021 Construction Quality Appraisal Standards for Construction Engineering

Shanghai Provincial Standard of the People's Republic of China, Calibration amount

  • DB31/T 127-1994 Standards for evaluating the quality of automobile secondary maintenance

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Calibration amount

  • IEEE 177-1966 STANDARD DEFINITIONS AND METHODS OF MEASUREMENT FOR PIEZOELECTRIC VIBRATORS
  • IEEE 86-1975 STANDARD DEFINITIONS OF BASIC PER-UNIT QUANTITIES FOR ALTERNATING-CURRENT ROTATING MACHINES

Professional Standard - Textile, Calibration amount

  • FZ/T 01074-2000 Regulations on labeling and quality identifying of fusible interlinings for garments

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Calibration amount

  • SP-147-2014 Quality Standard for Steel Castings Used in Standard Class Steel Valves - Sampling Method for Evaluating Casting Quality

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Calibration amount

  • MSS SP-147-2014 Quality Standard for Steel Castings Used in Standard Class Steel Valves - Sampling Method for Evaluating Casting Quality

Professional Standard - Ferrous Metallurgy, Calibration amount

  • YB 9010-1998 Inspection - Acception Regulation and Quality Evaluation Standard of Geotechnical Engineering
  • YB 9010-1998(条文说明) Inspection-Acception Regulation and Quality Evaluation Standard of Geotechnical Engineering(EXPLANATION)
  • YB/T 4253-2011 The Standard of Assessment of the Qulity for Installation of Metallurgical Equipment Project
  • YB/T 9008-1998 Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey
  • YB/T 9008-1998(条文说明) Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey(EXPLANATION)
  • YB/T 9251-1994 Composite steel formwork quality inspection and evaluation standards

Professional Standard - Aviation, Calibration amount

  • HB 4497-1990 Regulations on classifications of vernier caliper qualities
  • HB 6723.4-1993 Regulations on classification of depth vernier caliper qualities
  • HB 4509-1991 Regulations on classification of height vernier caliper qualities

KR-KS, Calibration amount

  • KS A ISO TR 16476-2018(2023) Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials
  • KS B ISO 14096-1-2023 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative
  • KS B ISO 19232-1-2021 Non-destructive testing — Image quality of radiographs —Part 1: Determination of the image quality value using wire-type image quality indicators
  • KS B ISO 19232-2-2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Calibration amount

  • GJB/J 5890-2006 Verification regulation for standard metal tank (1L～5000L)
  • GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method

Beijing Provincial Standard of the People's Republic of China, Calibration amount

  • DB11/T 357-2006 Standard and Evaluation for Service Quality of Accommodation

KE-KEBS, Calibration amount

国家市场监督管理总局、中国国家标准化管理委员会, Calibration amount

  • GB/T 39501-2020 Sensory analysis—Guidelines for the use of quantitative response scales

Professional Standard - Military and Civilian Products, Calibration amount

Jiangxi Provincial Standard of the People's Republic of China, Calibration amount

  • DB36/T 799-2014 Standards for Quality Evaluation of Expressway Greening Projects

Professional Standard - Environmental Protection, Calibration amount

  • HJ 618-2011 Determination of atmospheric articles PM and PM in ambient air by gravimetric method

Association of German Mechanical Engineers, Calibration amount

  • VDI/VDE 2617 Blatt 11-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets
  • VDI 2449 Blatt 3-2001 Measurement methods test criteria - General method for the determination of the uncertainty of calibratable measurement methods
  • VDI/VDE 2617 Blatt 7-2008 Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation

ES-UNE, Calibration amount

  • UNE-CEN/TR 17911:2023 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content (Endorsed by Asociación Española de Normalización in March of 2023.)
  • UNE-EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)

HU-MSZT, Calibration amount

Anhui Provincial Standard of the People's Republic of China, Calibration amount

  • DB34/ 371-2003 Anhui Water Conservancy Project Construction Quality Evaluation Standard

KP-CSK, Calibration amount

  • KPS 10882-2002 Size designation of clothes-Definitions and body measurement procedure

Professional Standard - Traffic, Calibration amount

Professional Standard - Code for Construction and Acceptance of Civil Air Defence Works, Calibration amount

  • RFJ 1(90)-1990 Standard for quality inspection and assessment of civil air defence works

American Society of Mechanical Engineers (ASME), Calibration amount

GOSTR, Calibration amount

  • GOST 18848-2019 Vegetable oils. Organoleptic and physicochemical parameters. Terms and definitions

ETSI - European Telecommunications Standards Institute, Calibration amount

  • EG 201 014-1997 Methods for Testing and Specification (MTS); ETSI Standards-Making; Technical Quality Criteria for Telecommunications Standards (V1.1.1)

Japanese Industrial Standards Committee (JISC), Calibration amount

  • JIS B 7440-2:1997 Coordinate metrology -- Part 2: Performance assessment of coordinate measuring machine
  • JIS S 4700:1998 Jewellery -- Ring-sizes -- Definition, measurement and designation

Professional Standard - Electricity, Calibration amount

  • DL/T 1002-2006 Calibration for low-level dissolved oxygen meter.standard gases calibration

PL-PKN, Calibration amount

  • PN D95000-1993 Round wood. Measurement, determination of cubage and marking
  • PN H84023-04-1989 Steel for determined purposes Standard ?uality Iow carbon steel Grades

Taiwan Provincial Standard of the People's Republic of China, Calibration amount

  • CNS 5197-1980 Photometric Measurement on Standard Fluorescent Lamps

Professional Standard - Aquaculture, Calibration amount

  • SC/T 8017.2-1989 Fishing boat construction quality rating standard Hull quality assessment
  • SC/T 8017.3-1989 Fishing boat construction quality rating standard and engine quality rating
  • SC/T 8017.5-1989 Fishing boat construction quality rating standard piping system quality assessment
  • SC/T 8017.6-1989 Fishing boat construction quality rating standard outfitting quality assessment

Professional Standard - Water Conservancy, Calibration amount

  • SL 521-2013 Standard for quality evaluation on preliminary design of water resources and hydropower project

IX-ICAO, Calibration amount

  • ICAO 9625-2003 Manual of Criteria for the Qualification of Flight Simulators Second Edition

International Electrotechnical Commission (IEC), Calibration amount

  • IEC TR 62434:2006 pH measurements in difficult media - Definitions, standards and procedures

Xinjiang Provincial Standard of the People's Republic of China, Calibration amount

CZ-CSN, Calibration amount

  • CSN ISO 7395:1993 Gas analysis. Preparation of calibration gas mixtures. Masss dynamic method

Institute of Electrical and Electronics Engineers (IEEE), Calibration amount

  • IEEE P1139/D16, November 2021 IEEE Draft Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities

  Solution Calibration, calibration, Calibration procedure, Calibration procedure, Calibration d, Transmission Calibration, Sample Calibration, tire calibration, calibration method, Calibration sample, Measured amount Calibration amount, two-person calibration, calibration method, Calibration amount, Calibration copper, Calibrator, calibration gas, How to calibrate, contour calibration, Calibration Quantitative Standard Method.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved