ZH
RU
ES

calibration method

calibration method, Total:165 items.

In the international standard classification, calibration method involves: Milk and milk products, Fuels, Paints and varnishes, Products of the chemical industry, Surface treatment and coating, Air quality, Plastics, Vocabularies, Non-ferrous metals, Construction materials, Measurement of volume, mass, density, viscosity, Power stations in general, Equipment for petroleum and natural gas industries, Linear and angular measurements, Law. Administration, Products of the textile industry, Lamps and related equipment, Petroleum products in general, Nuclear energy engineering, Lubricants, industrial oils and related products, Farming and forestry, Metrology and measurement in general, Edible oils and fats. Oilseeds, Inorganic chemicals, Analytical chemistry, Organic chemicals, IT terminal and other peripheral equipment, Quality, Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, Transport, Shipbuilding and marine structures in general, Piezoelectric and dielectric devices, Cereals, pulses and derived products, Railway rolling stock, Structures of buildings, Laboratory medicine, Radiation measurements, Road vehicles in general, Test conditions and procedures in general, Thermodynamics and temperature measurements, Refractories, Terminology (principles and coordination).

ZA-SANS, calibration method

SANS 315:2005 Milk - Determination of fat content - Gravimetric method (Reference method)
SANS 318:2005 Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)

National Metrological Technical Specifications of the People's Republic of China, calibration method

JJF(航空) 030-1987 Calibration method of three-coordinate measuring machine

Professional Standard - Petroleum, calibration method

SY/T 6193-1996 Calibration method of recoverable reserves in heavy oil steam injection development

RU-GOST R, calibration method

GOST R 56885-2016 Biomass. Determination of total amount of solids by standard method
GOST R 56881-2016 Biomass. Determination of the ash content by standard method
GOST R 56717-2015 Air quality. Stationary source emission. Guidelines for the elaboration of methods of measurement
GOST 8.400-1980 State system for ensuring the uniformity of measurements. Standard metallic gauges. Calibration methods
GOST R 8.675-2009 State system for ensuring the uniformity of measurements. Electromagnetic flowmeter. Salibration methods
GOST 28238-1989 Sunflower. Method for determination of oleic acid mass fraction according to the oil refraction index
GOST R 56886-2016 Wood Fuels. Determination of moisture content by standard method
GOST R 56888-2016 Wood Fuel. Determination of ash content by standard method
GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 8.235-1977 State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification
GOST R ISO 17258-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Benchmarking
GOST 32206-2013 Special railway rolling stock. Outdoor noise. Measuring standards and methods of determination
GOST R 56883-2016 Biomass. Determination of bulk density by standard method

Association Francaise de Normalisation, calibration method

NF T30-122:1974 Paints. Determination of dry film thickness. Dial gauge method.
XP CEN/TS 15674:2008 Qualité de l'air - Mesures des émissions de sources fixes - Lignes directrices pour l'élaboration de méthodes normalisées
NF X43-351*NF EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury.
NF S92-020*NF EN ISO 15194:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation
XP X43-378*XP CEN/TS 15674:2008 Air Quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
NF M08-019:1996 Refrigerated light hydrocarbon fluids. Calibration of membrane tanks and independent prismatic tanks in ships. Physical measurement.
NF EN 15853:2010 Qualité de l'air ambiant - Méthode normalisée pour la détermination des dépôts de mercure

VN-TCVN, calibration method

TCVN 2370-1987 Raw silk.Method for determination of standard mass

American Society for Testing and Materials (ASTM), calibration method

ASTM E2966-14 Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
ASTM C1203-04 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM C1203-91(1996) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM C1203-04(2014) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM C1203-04(2019) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM D6869-03 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM E1615-05 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-04 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-00 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-16 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-08 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM E1615-22 Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry
ASTM D4530-06e1 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-15(2020) Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-15 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D629-99 Standard Test Methods for Quantitative Analysis of Textiles
ASTM D5770-11(2017) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM E1584-23 Standard Test Method for Assay of Nitric Acid
ASTM E1569-93(1998) Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM D629-08 Standard Test Methods for Quantitative Analysis of Textiles
ASTM D629-15 Standard Test Methods for Quantitative Analysis of Textiles
ASTM E1228-23 Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure
ASTM D7637-10 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM D4530-00 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-03 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D4530-06 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM E371-99 Standard Test Method for the Determination of Boron in Ferroboron
ASTM E45-05e3 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM D3133-01 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D3133-01(2005) Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D4530-07 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM A630-16a Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16ae1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM E45-18 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
ASTM B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM E1569-03 Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM E45-97e2 Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E45-18a Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E45-18a(2023) Standard Test Methods for Determining the Inclusion Content of Steel
ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
ASTM C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM D6505-00(2006) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D6505-00 Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D7959-15 Standard Test Method for Chloride Content Determination
ASTM F2459-12 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
ASTM C1068-03 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C1068-03(2011) Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D8052/D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM D8052/D8052M-22 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM D1603-11 Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM E2966-14(2019) Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
ASTM C1068-21 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D6505-00(2022) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM C1356-07 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM C1356-07(2012) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM E45-97(2002) Standard Test Methods for Determining the Inclusion Content of Steel
ASTM C1068-96e1 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D6259-15(2019) Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
ASTM C1171-96 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM C1171-96(2003) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM C1171-16 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

Professional Standard - Urban Construction, calibration method

CJ 26.7-1991 Water quality inspection method of urban sewage - Determination gravimetric method of standard oil
CJ 26.24-1991 Municipal sewage water quality examination method standard chloride determination silver method
CJ 26.5-1991 Municipal sewage water quality inspection method Standard gravimetric method for total solids
CJ 26.11-1991 Municipal sewage water quality inspection method standard sulfate gravimetric method

National Metrological Verification Regulations of the People's Republic of China, calibration method

JJG 643-2003 Flow Standard Facilities by Master Meter Method

Lithuanian Standards Office , calibration method

LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
LST EN 15853-2010 Ambient air quality - Standard method for the determination of mercury deposition

API - American Petroleum Institute, calibration method

API MPMS 4.9.1-2005 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers (First Edition)

European Committee for Standardization (CEN), calibration method

EN 13798:2002 Hydrometry - Specification for a reference raingauge pit
EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
CEN/TS 17812:2022 Determination of the acoustic properties of markings - The CPX measurement method
EN ISO 8311:1995 Refrigerated Light Hydrocarbon Fluids - Calibration of Membrane Tanks and Independent Prismatic Tanks in Ships - Physical Measurement

Danish Standards Foundation, calibration method

DS/CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DS/EN 15853:2010 Ambient air quality - Standard method for the determination of mercury deposition

AENOR, calibration method

UNE-CEN/TS 15674:2009 EX Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
UNE-EN 15853:2010 Ambient air quality - Standard method for the determination of mercury deposition

Professional Standard - Environmental Protection, calibration method

HJ 618-2011 Determination of atmospheric articles PM and PM in ambient air by gravimetric method

Association of German Mechanical Engineers, calibration method

VDI 2449 Blatt 3-2001 Measurement methods test criteria - General method for the determination of the uncertainty of calibratable measurement methods

Group Standards of the People's Republic of China, calibration method

T/CCAS 025-2022 Method for determination of net mass of China ISO standard sand
T/SHSFJD 1101-2021 Judicial Appraisal Standards for Construction Engineering Quality
T/SDAS 645-2023 Lutein Content Index and Determination Method in Wheat
T/GDPCIA 002-2019 Information technology — Office equipment — Method for the determination of declared yield for toner cartridge
T/CI 003-2022 Index and determination method of phytic acid content in low phytic acid wheat variety
T/SMA 0007-2020 Evaluation Method of Measurement Uncertainty of Variable Head Water Flow Standard Device

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., calibration method

IEEE 177-1966 STANDARD DEFINITIONS AND METHODS OF MEASUREMENT FOR PIEZOELECTRIC VIBRATORS

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., calibration method

SP-147-2014 Quality Standard for Steel Castings Used in Standard Class Steel Valves - Sampling Method for Evaluating Casting Quality

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), calibration method

MSS SP-147-2014 Quality Standard for Steel Castings Used in Standard Class Steel Valves - Sampling Method for Evaluating Casting Quality

Professional Standard - Electricity, calibration method

DL/T 1002-2006 Calibration for low-level dissolved oxygen meter.standard gases calibration

British Standards Institution (BSI), calibration method

BS ISO 7507-1:2004 Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Strapping method
BS EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
BS ISO 13053-2:2011 Quantitative methods in process improvement. Six Sigma. Tools and techniques
PD CEN/TS 17812:2022 Determination of the acoustic properties of markings. The CPX measurement method
PD CEN/TR 17911:2023 Stationary source emissions. Guideline for the elaboration of standardized measurement methods. Recommendations for the structure and content
BS EN 15853:2010 Ambient air quality - Standard method for the determination of mercury deposition
BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method

American Society of Mechanical Engineers (ASME), calibration method

ASME B89.1.12M-1990 Methods for performance evaluation of coordinate measuring machines

Korean Agency for Technology and Standards (KATS), calibration method

KS C 7605-2020 Photometric measurement on standard fluorescent lamps
KS C 7605-1982 Photometric measurement on standard fluorescent lamps
KS M ISO 8311:2003 Refrigerated light hydrocarbon fluids-Calibration of membrane tanks and independent prismatic tanks in ships-Physical measurement
KS M ISO 8311:2013 Refrigerated light hydrocarbon fluids－Calibration of membrane tanks and independent prismatic tanks in ships－Physical measurement

Taiwan Provincial Standard of the People's Republic of China, calibration method

CNS 5197-1980 Photometric Measurement on Standard Fluorescent Lamps

German Institute for Standardization, calibration method

DIN CEN/TR 17911:2023-06 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023
DIN EN 15852:2010-11 Ambient air quality - Standard method for the determination of total gaseous mercury; German version EN 15852:2010
DIN CEN/TS 17812:2022-09 Determination of the acoustic properties of markings - The CPX measurement method; German version CEN/TS 17812:2022
DIN EN 15853:2010-11 Ambient air quality - Standard method for the determination of mercury deposition; German version EN 15853:2010
DIN EN 12341:2014-08 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2014 / Note: To be replaced by DIN EN 12341 (2022...
DIN EN 12341:2022-06 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German and English version prEN 12341:2022 / Note: Date of issue 2022-05-...

ES-UNE, calibration method

UNE-CEN/TR 17911:2023 Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content (Endorsed by Asociación Española de Normalización in March of 2023.)

AASHTO - American Association of State Highway and Transportation Officials, calibration method

TP 72-2008 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)
T 362-2016 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)

Professional Standard - Nuclear Industry, calibration method

EJ/T 911-1994 Volumetric Method for Determination of Silicon in U₃Si₂

Military Standard of the People's Republic of China-General Armament Department, calibration method

GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system
GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, calibration method

GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method

PK-PSQCA, calibration method

PS 1522-1982 PAKISTAN STANDARD METHOD FOR DETERMINATION OF ALKALI CONTENT IN WOOL

International Organization for Standardization (ISO), calibration method

ISO 8311:1989 Refrigerated Light Hydrocarbon Fluids - Calibration of Membrane Tanks and Independent Prismatic Tanks in Ships - Physical Measurement First Edition; (CEN EN ISO 8311: 1995) (Second Edition)
ISO Guide 4:1975 Preparation of standard methods of measuring performance of consumer goods (SMMP)

Professional Standard - Agriculture, calibration method

NY/T 208.1-1992 Quality index of promotion and identification method for agricultural diesel engine

Professional Standard - Petrochemical Industry, calibration method

SH/T 0625-1995 Determination of γ-Al₂O₃ content in silicon-alumina catalyst (X-ray diffraction method)

交通运输部, calibration method

JT/T 1363-2020 Coastal navigation mark maintenance quality requirements and assessment methods

American National Standards Institute （ANSI), calibration method

ASTM D5770-23 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing (Standard + Redline PDF Bundle)

CY-CYS, calibration method

CYS 145 Pt.4 Method 401-1985 Cyprus Standard METHOD OF DETERMINATION OF CARBON BLACK CONTENT OF POLYOLEFIN COMPOUNDS

TR-TSE, calibration method

TS 2185-1976 STANDARD DEFINITIONS AND METHODS OF MEASUREMENT FOR PIEZOELECTRIC VIBRATORS OPERATING ?VER THE FREOJJENCY RANGE UP TO 30 MHz

Professional Standard - Electron, calibration method

SJ/Z 9157-1987 Standard definition and method for measurement of piezoelectric vibrator operating in a frequency up to 30MHz

CZ-CSN, calibration method

CSN ISO 7395:1993 Gas analysis. Preparation of calibration gas mixtures. Masss dynamic method

Jilin Provincial Standard of the People's Republic of China, calibration method

DB22/T 2285-2015 Yield Identification Method of Peanut Varieties Photosynthetic Index Method

KE-KEBS, calibration method

KS 05-33 Pt.1-2-1977 KENYA STANDAfiD DETERMINATION OF THE PRESENCE OF PRESERVATIVES AND PESTICIDE RESIDUES IN DAIRY PRODUCTS

The American Road & Transportation Builders Association, calibration method

AASHTO T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
AASHTO T 291-1994(R 2018) Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil