ZH
RU
ES
carbon plater carbon
carbon plater carbon, Total:500 items.
In the international standard classification, carbon plater carbon involves: Iron and steel products, Surface treatment and coating, Analytical chemistry, Products of non-ferrous metals, Construction of waterways and ports, Electric traction equipment, Ferrous metals, On-board equipment and instruments, Pipeline components and pipelines, Electrical wires and cables, Welding, brazing and soldering, Fasteners for aerospace construction, Non-metalliferous minerals, Medical equipment, Pharmaceutics, Equipment for petroleum and natural gas industries, Coals, Materials for aerospace construction, Extraction and processing of petroleum and natural gas, Electricity. Magnetism. Electrical and magnetic measurements, Diagnostic, maintenance and test equipment, Terminology (principles and coordination), Fuels, Resistors, Environmental testing, Air quality, Non-ferrous metals, Mining equipment, Fasteners, Inorganic chemicals, Rubber and plastics products, Components for aerospace construction, Refractories, Products of the chemical industry, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Alarm and warning systems, Refrigerating technology, Road vehicles in general, Installations in buildings, Farming and forestry, Water quality, Textile fibres, Testing of metals, Petroleum products in general, Lubricants, industrial oils and related products, Organic chemicals, Natural gas, Dentistry, Physics. Chemistry, Domestic, commercial and industrial heating appliances.
Professional Standard - Light Industry, carbon plater carbon
- QB/T 2030-1994 Galvanized, copper-plated low carbon steel flat wire
- QB/T 1925.1-1993 General purpose galvanized low carbon steel wire braided square mesh (galvanized low carbon steel wire cloth)
- QB/T 1925.2-1993 General Purpose Galvanized Low Carbon Steel Wire Woven Mesh Hexagonal Mesh
- QB/T 1925.3-1993 General Purpose Galvanized Low Carbon Steel Wire Woven Mesh Corrugated Square Hole Mesh
Taiwan Provincial Standard of the People's Republic of China, carbon plater carbon
Japanese Industrial Standards Committee (JISC), carbon plater carbon
Society of Automotive Engineers (SAE), carbon plater carbon
- SAE AMS5033-1942 STEEL WIRE, ZINC COATED (Low Carbon)
- SAE AMS7213-2002 Cotter Pins, Medium Carbon Steel Zinc Plated
- SAE AMS5030E-1987 STEEL WELDING WIRE Low Carbon Cold Drawn, Copper Coated
- SAE AMS5036H-2015 Steel Sheet and Strip, Aluminum Coated Low Carbon
- SAE AMS5036G-1994 STEEL SHEET AND STRIP, ALUMINUM COATED Low Carbon
- SAE AMS5036J-2020 Steel Sheet and Strip, Aluminum Coated, Low Carbon
- SAE AS412B-2001 Carbon Monoxide Detector Instruments
- SAE AS412A-1991 CARBON MONOXIDE DETECTOR INSTRUMENTS
- SAE AS412B-2008 Carbon Monoxide Detector Instruments
- SAE AMS3614C-2011 Polycarbonate Sheet and Parts, Optical Grade, Coated
- SAE AS46767-1-1979 AS46767 Nut, Self Locking, Miniature, Double Lug Floating Anchor, Carbon Steel, Cadmium Coated (125 000 lbf/in2) 235°C
- SAE AS22759/6-2007 WIRE, ELECTRICAL, FLUOROCARBON-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
- SAE AS22759/6A-2020 WIRE, ELECTRIC, FLUOROCARBON-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
Korean Agency for Technology and Standards (KATS), carbon plater carbon
- KS D 7011-2002(2022) Zinc-coated low carbon steel wires
- KS D 7011-2002(2017) Zinc-coated low carbon steel wires
- KS D 7003-1991(2002) GALVANIZED LOW CARBON STEEL WIRE STRAND
- KS D 7003-1986 GALVANIZED LOW CARBON STEEL WIRE STRAND
- KS D 7053-1989 Galvanized low carbon steel wire for armouring cables
- KS D 7053-1989(2019) Galvanized low carbon steel wire for armouring cables
- KS R 3033-1984 Simplified carbonmonoxide testers for automobiles
- KS R 3033-2013 Simplified carbonmonoxide testers for automobiles
- KS R 3033-1984(2011) Simplified carbonmonoxide testers for automobiles
- KS C 5116-2003 Fixed carbon composition resistors for use in electronic equipment
- KS B 5358-1987 Continuous analyzer for carbon monoxide in ambient air
- KS B 5358-2001 Continuous analyzer for carbon monoxide in ambient air
- KS B 5358-1982 Continuous analyzer for carbon monoxide in ambient air
- KS D ISO 5950:2004 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- KS B 5357-1981 Continuous analyzers for hydrocarbons in ambient air
- KS B 5358-1987(2022) Continuous analyzer for carbon monoxide in ambient air
- KS B 5358-1987(2017) Continuous analyzer for carbon monoxide in ambient air
- KS C 6597-2007(2018) Installation, operation and maintenance of carbon monoxide detection instruments
- KS B 5357-1981(2021) Continuous analyzers for hydrocarbons in ambient air
- KS D ISO 5950-2004(2019) Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- KS R 1051-2013 Testing methods for simplified carbonmonoxide testers for automobiles
- KS R 1051-2006(2011) Testing methods for simplified carbonmonoxide testers for automobiles
- KS R 1051-1986 Testing methods for simplified carbonmonoxide testers for automobiles
- KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
- KS M 2418-2006 Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
- KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
- KS D ISO 4999:2004 Continuous hot-dip terne(lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
- KS I ISO TR 12148-2011(2021) Natural gas－Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
- KS M ISO 10238:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
- KS M 2418-2006(2016) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
- KS M ISO 10238:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
- KS P ISO 7787-4:2018 Dental rotary instruments — Cutters — Part 4: Miniature carbide laboratory cutters
- KS M 2418-2006(2021) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
Indonesia Standards, carbon plater carbon
- SNI 07-2226-1991 Zinc coated high carbon steel wire stranded
- SNI ISO 9918:2008 Safety requirement of capnometers use for human
- SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers
- SNI 06-2509-1991 Water, Test methods for carbonate pesticide content by gas chromatography apparatus
- SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation
International Federation of Trucks and Engines, carbon plater carbon
GM North America, carbon plater carbon
- GM GM6178M-1991 Aluminum Coated Cold Rolled, Low Carbon Steel Sheet
- GM GM6199M-1991 Aluminum-Zinc Coated Cold Rolled Low Carbon Steel Sheet
- GM GM6029M-1996 Specifications for Covered Mild Steel Electrodes (Shielded Metal Arc Welding) Replaced by AWS A5.1
Professional Standard - Customs, carbon plater carbon
- HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer
American Society for Testing and Materials (ASTM), carbon plater carbon
- ASTM F4-66(1999) Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes
- ASTM A641/A641M-09a(2014) Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
- ASTM A809-08(2013) Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
- ASTM B183-79(2004)e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM B183-18(2022) Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM F4-66(2005) Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes
- ASTM A411-08(2022) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM A641/A641M-09 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
- ASTM A641/A641M-09a Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
- ASTM A818-06 Standard Specification for Coppered Carbon Steel Wire
- ASTM A818-06(2010) Standard Specification for Coppered Carbon Steel Wire
- ASTM B242-99(2020) Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM A818-06(2021) Standard Specification for Coppered Carbon Steel Wire
- ASTM A809-08(2017) Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
- ASTM A411-08 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM A411-08(2013) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM B242-99(2014) Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM B242-99(2014)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM A411-08(2017) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM A809-23 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
- ASTM A411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM A641/A641M-03 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
- ASTM A641/A641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
- ASTM A411-03 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM A641/A641M-19 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
- ASTM B242-99 Standard Guide for Preparation of High-Carbon Steel For Electroplating
- ASTM B242-99(2004)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM B183-79(1997) Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM B183-18 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM B183-79(2014) Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM D5373-93(2002) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM D5373-93(1997) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM D5373-16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
- ASTM D5373-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM D5373-02(2007) Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM B183-79(2009) Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM B242-99(2009) Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM A1057/A1057M-08 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM A1057/A1057M-08(2014) Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated 40;Galvanized41; by the Hot-Dip Process
- ASTM A787/A787M-09 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
- ASTM A787/A787M-14 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
- ASTM A764-07 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
- ASTM A764-07(2012) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
- ASTM C1349-96 Standard Specification for Architectural Flat Glass Clad Polycarbonate
- ASTM C1349-04 Standard Specification for Architectural Flat Glass Clad Polycarbonate
- ASTM C134-95(1999) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
- ASTM C1349-10 Standard Specification for Architectural Flat Glass Clad Polycarbonate
- ASTM A1057/A1057M-08(2019) Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM A764-07(2017) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
- ASTM E1009-95(2006) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
- ASTM D4308-95(2000) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
- ASTM D4308-95 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
- ASTM D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
- ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
- ASTM A1003/A1003M-13b Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM G152-05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5373-08 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
- ASTM A1003/A1003M-01 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-00 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-02 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-09 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-14 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-15 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM G153-04 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G152-04 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
- ASTM A1003/A1003M-13 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-13a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-01 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM G152-00a Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G152-00 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G152-00ae1 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM A562/A562M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
- ASTM A562/A562M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
- ASTM A1003/A1003M-11 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM G153-00a Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-00ae1 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-00 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-92 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D5291-96 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM G152-13(2021) Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-16 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D5291-10(2015) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D5291-09 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM F2329/F2329M-15(2023) Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
- ASTM D5291-02(2007) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
IE-NSAI, carbon plater carbon
Professional Standard - Ferrous Metallurgy, carbon plater carbon
- YB/T 125-1997 Galvanized carbon steel wires for optical fibre cable
- YB/T 5130-1993 Hot-dip lead alloy cold-rolled carbon thin steel plate
- YB/T 5336-2006 Quantitative Analysis of Carbide Phase in High Speed Steel by X-ray Diffraction Method
ET-QSAE, carbon plater carbon
SAE - SAE International, carbon plater carbon
National Metrological Verification Regulations of the People's Republic of China, carbon plater carbon
German Institute for Standardization, carbon plater carbon
- DIN 43264-1:1976 Pantograph carbons; carbons and socket-sections
- DIN EN ISO 14373:2015 Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015); German version EN ISO 14373:2015
- DIN EN ISO 14373:2007 Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2006); English version of DIN EN ISO 14373:2007-09
- DIN 51732:2014 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN 51732:2007 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN EN ISO 21663:2021-03 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020); German version EN ISO 21663:2020
- DIN EN 10131:1992 Cold-rolled uncoated low carbon and high-yield strength steel flats for cold forming; tolerances on size and geometrical tolerances; german version EN 10131:1991
BR-ABNT, carbon plater carbon
IN-BIS, carbon plater carbon
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, carbon plater carbon
- GB/T 346-1984 Galvanized low carbon steel wire for electric communications lines
- GB 346-1984 Galvanized low carbon steel wire for communication lines
- GB/T 3082-1984 Galvanized low carbon steel wire for armouring cables
- GB/T 30733-2014 Determination of total carbon, hydrogen and nitrogen content in coal.Instrumental method
- GB/T 24215-2009 Hot-dip galvanized steel wires for bridge cables wrap
- GB/T 3082-2008 Galvanized or zinc-5％ aluminum-mixed mischumetal alloy-coated low carbon steel wire for armouring cables
- GB/T 5065-2004 Hot-dip lead-tin alloy coated cold rolled carbon steel sheets and strips
- GB/T 8359-1987 Carbides in high speed steel--Quantitative phase analysis--Method of X-ray diffractometer
SG-SPRING SG, carbon plater carbon
- SS 43-1971 SPECIFICATION FOR DOMESTIC REFUSE-BINS MADE FROM GALVANIZED OR UNGALYANIZED MILD STEEL
YU-JUS, carbon plater carbon
未注明发布机构, carbon plater carbon
- BS 3SP 1:2013(2015) Specification − Shackles, carbon steel, cadmium plated for aircraft
- BS 2W 12:1989(2000) Specification for Preformed zinc coated carbon steel wire rope (metric and inch series)
- DIN EN 10142:2000 Continuously hot-dip zinc coated low carbon steel strip and sheet for cold forming — Technical delivery conditions
- BS 1565-2:1973(2000) Specification for Galvanized mild steel indirect cylinders — Annular or saddle - back type — Part 2 : Metric units
- BS 1565-1:1949(2000) Specification for Galvanized mild steel indirect cylinders annular or saddle - back type — Part 1 : Imperial units
CEN - European Committee for Standardization, carbon plater carbon
- EN ISO 14373:2007 Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
- PD CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon@ hydrogen and nitrogen - Instrumental methods
British Standards Institution (BSI), carbon plater carbon
- BS 1140:1993 Specification for resistance spot welding of uncoated and coated low carbon steel
- BS 3SP 1:2013 Specification. Shackles, carbon steel, cadmium plated for aircraft
- BS ISO 4998:2014 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
- BS ISO 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- BS 2W 12:1989 Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
- BS ISO 3575:2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
- BS 417-2:1987 Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders - Metric units
- BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
- BS 2630:1982 Specification for resistance projection welding of uncoated low carbon steel sheet and strip using embossed projections
- BS 6582:2000 Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
- BS EN 15104:2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
- BS ISO 5533:2023 Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
- BS ISO 4999:2014 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
- BS DD CEN/TS 15104:2006 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- BS DD CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
- PD ISO/TR 12148:2009 Natural gas. Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
- BS EN 10142:2000 Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions
- DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
- 22/30448285 DC BS ISO 5533. Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
- BS ISO 3575:2016 Tracked Changes. Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
- BS 7967-5:2010 Carbon monoxide in dwellings and other premises and the combustion performance of gas-fired appliances.Part 5: Guide for using electronic portable combustion gas analysers in non-domestic
premises for the measurement of carbon
monoxide and carbon dioxid
- BS EN ISO 21663:2020 Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
RO-ASRO, carbon plater carbon
- STAS 11607-1981 LOW AND MEDIUM ALLOYED CARBON STEELS Spectrographic analysis
- STAS SR EN 27787-3-1995 Dental rotary instruments. Cutters. Part 3: Carbide laboratory cutters for millirtg machines
AIA/NAS - Aerospace Industries Association of America Inc., carbon plater carbon
- NASM21318-1998 Screw@ Drive@ Round Head@ Type U@ Steel@ Carbon@ Cadmium Plated
- NASM35206-1999 Screw@ Machine-Pan Head@ Cross-Recessed@ Carbon Steel@ Cadmium Plated@ UNC-2A
- NASM21318-2012 SCREW@ DRIVE@ ROUND HEAD@ TYPE U@ STEEL@ CARBON@ CADMIUM PLATED (Rev 1)
- NASM21318-2014 SCREW@ DRIVE@ ROUND HEAD@ TYPE U@ STEEL@ CARBON@ CADMIUM PLATED (Rev 2)
- NASM35207-1999 Screw@ Machine-Pan Head@ Cross Recessed@ Carbon Steel@ Cadmium Plated@ UNF-2A (IN./MM)
- NASM35191-1998 Screw@ Machine - 82 Degree Flat Countersunk Head@ Cross-Recessed@ Carbon Steel@ Cadmium Plated@ UNF-2A
- NASM35207-2004 Screw@ Machine-Pan Head@ Cross Recessed@ Carbon Steel@ Cadmium Plated@ UNF-2A (IN./MM) (Rev 1)
- NASM35190-1998 Screw@ Machine-82 Degree Flat Countersunk Head@ Cross-Recessed@ Carbon Steel@ Cadmiun Plated@ UNC-2A
- NASM35206-2004 Screw@ Machine-Pan Head@ Cross-Recessed@ Carbon Steel@ Cadmium Plated@ UNC-2A (Rev 1)
- NASM35191-2011 SCREW@ MACHINE@ 82° FLAT COUNTERSUNK HEAD@ CROSS-RECESSED@ CARBON STEEL@ CADMIUM PLATED@ UNF-2A (Rev 1)
- NASM35191-2016 SCREW@ MACHINE@ 82° FLAT COUNTERSUNK HEAD@ CROSS-RECESSED@ CARBON STEEL@ CADMIUM PLATED@ UNF-2A (Rev 2)
- NASM35207-2010 SCREW@ MACHINE@ PAN HEAD@ CRUCIFORM RECESS@ CARBON STEEL@ CADMIUM PLATED@ UNF-2A (IN./MM) (Rev 2)
- NASM35207-2015 SCREW@ MACHINE@ PAN HEAD@ CRUCIFORM RECESS@ CARBON STEEL@ CADMIUM PLATED@ UNF-2A (IN./MM) (Rev 3)
- NASM24629-1998 Screw@ Tapping-Thread Cutting@ Types D@F@G@ or T@ Pan Head@ Cross Recessed@ Steel@ Carbon Cadmium Plated
- NASM35190-2015 SCREW@ MACHINE@ 82? FLAT COUNTERSUNK HEAD@ CRUCIFORM RECESS@ CARBON STEEL@ CADMIUM PLATED@ SELF-LOCKING AND NON-LOCKING@ UNC-2A (Rev 3)
- NASM35190-2014 SCREW@ MACHINE@ 82? FLAT COUNTERSUNK HEAD@ CRUCIFORM RECESS@ CARBON STEEL@ CADMIUM PLATED@ SELF-LOCKING AND NON-LOCKING@ UNC-2A (Rev 2)
- NASM35190-2010 SCREW@ MACHINE@ 82 DEGREES FLAT COUNTERSUNK HEAD@ CRUCIFORM RECESS@ CARBON STEEL@ CADMIUM PLATED@ SELF-LOCKING AND NON-LOCKING@ UNC-2A (Rev 1)
AASHTO - American Association of State Highway and Transportation Officials, carbon plater carbon
- M 280-2003 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
- M 280-2009 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
- M 280-2001 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire (HM-22; Part IB; ASTM Designation A 121-99)
- T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- T 217-1987 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- T 217-2002 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- T 217-1996 Standard Specification for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester (Nineteenth Edition)
Professional Standard - Petroleum, carbon plater carbon
- SY/T 6299-1997 Core carbonate content analyser
- SY/T 6842-2011 Through-tube carbon/oxygen logging tool
- SY 6842-2011 Through-tubing carbon-oxygen ratio energy spectrum logging tool
- SY/T 5693-2008 Specification for calibration of the C/O spectrum logging tool
- SY/T 6809-2010 Calibration method for carbonate analyser of rock
- SY 6809-2010 Calibration Methods for Rock Carbonate Analyzers
- SY 5693-2008 Calibration specification for carbon-oxygen ratio energy spectrum logging tool
- SY/T 5693-1995 Technical Regulations for Maintenance and Calibration of Carbon-Oxygen Ratio Spectrum Logging Tool
International Organization for Standardization (ISO), carbon plater carbon
- ISO 4998:2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- ISO 4998:1991 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- ISO 4998:1996 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- ISO 4998:1977 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- ISO 4998:2023 Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality
- ISO 9918:1993 Capnometers for use with humans; requirements
- ISO 4998:2014 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
- ISO 3575:2005 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 5950:1991 Continous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 5950:2008 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 3575:2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 5950:2000 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 5002:1982 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 3575:2016 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
- ISO 3930:1976 Road vehicles — Carbon monoxide analyser equipment — Technical specifications
- ISO 5950:1979 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 5002:1999 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 3575:1976 Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
- ISO/CD 5002:2023 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 5000:2005 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 4999:1991 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 5000:1993 Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 5002:2008 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 5002:2013 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 5000:1980 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 3575:1996 Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
- ISO/TS 12902:2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- ISO/FDIS 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
- ISO/CD 29541:1976 Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method
- ISO 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
- ISO 4999:1978 Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities
- ISO 5000:2011 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 4999:2011 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
- ISO 4999:2005 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
- ISO 4999:2014 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
- ISO 29541:2010 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- ISO/DIS 5533 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
- ISO 4999:1999 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
- ISO/CD 3575:2023 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
- ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
- ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- ISO 21663:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
Qinghai Provincial Standard of the People's Republic of China, carbon plater carbon
- DB63/T 1612-2017 Chemical analysis method for fixed carbon in carbonate-containing graphite ore Nitric acid treatment High-frequency infrared carbon-sulfur analyzer method
European Committee for Standardization (CEN), carbon plater carbon
- EN ISO 14373:2015 Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
- prEN 10139-1992 Cold rolled uncoated mild steel narrow strip for cold forming; technical delivery conditions
- EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- EN 10142:2000 Continuously Hot-Dip Zinc Coated Low Carbon Steels Strip and Sheet for Cold Forming - Technical Delivery Conditions
- EN 10142:1990 Continously hot-dip zinc coated low carbon steel sheet and strip for cold forming; technical delivery conditions
- prEN 2160-1978 Flexible wire ropes for aircraft controls in zinc coated carbon steel; construction, dimensions, loads; Aerospace series
- EN ISO 21663:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
国家市场监督管理总局、中国国家标准化管理委员会, carbon plater carbon
- GB/T 3082-2020 Galvanized or zinc-aluminum alloy-coated low-carbon steel wire for armoured cables
Professional Standard - Machinery, carbon plater carbon
RU-GOST R, carbon plater carbon
- GOST ISO 9918-2012 Capnometers for use with humans. Requirements
- GOST R ISO 9918-1999 Capnometers for use with humans. Requirements
- GOST R 54244-2010 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
- GOST 32979-2014 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
- GOST 803-1981 Hot-rolled strips of carbon high-grade steel for plating. Specifications
- GOST 32985-2014 Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods
- GOST R 54216-2010 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods
- GOST 33513-2015 Solid recovered fuel. Determination of carbon (C), hydrogen (H) and nitrogen (N) content by instrumental method
- GOST R ISO 10238-2015 Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Determination of sulfur content by an instrumental method
National Metrological Technical Specifications of the People's Republic of China, carbon plater carbon
煤炭工业部, carbon plater carbon
- MT 228-1990 Technical conditions of carbon and hydrogen analyzer in coal
国家煤矿安全监察局, carbon plater carbon
- MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal
ZA-SANS, carbon plater carbon
- SANS 4998:2007 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- SANS 3575:2008 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
- SANS 3575:1996 Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
- SANS 12902:2007 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
Defense Logistics Agency, carbon plater carbon
- DLA MS51967 REV D VALID NOTICE 4-2008 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNC-2B(IN./MM)
- DLA MS51968 REV C VALID NOTICE 4-2008 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNF-2B (IN./MM)
- DLA MS51967 REV D NOTICE 3-2003 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNC-2B(IN./MM)
- DLA MS51967 REV D VALID NOTICE 1-1988 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNC-2B(IN./MM)
- DLA MS51967 REV D-1970 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNC-2B(IN./MM)
- DLA MS51968 REV C NOTICE 3-2003 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNF-2B (IN./MM)
- DLA MS51968 REV C VALID NOTICE 1-1988 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNF-2B (IN./MM)
- DLA MS51968 REV C-1970 NUT, PLAIN, HEXAGON-CARBON STEEL, CADMIUM PLATED, UNF-2B (IN./MM)
- DLA MS21316 REV C NOTICE 2-1999 THUMBSCREW (SHOULDERED), FLAT POINT, CARBON STEEL, CADMIUM PLATED, UNC-2A
- DLA MS21316 REV C VALID NOTICE 1-1994 THUMBSCREW (SHOULDERED), FLAT POINT, CARBON STEEL, CADMIUM PLATED, UNC-2A
- DLA MS21316 REV C-1974 THUMBSCREW (SHOULDERED), FLAT POINT, CARBON STEEL, CADMIUM PLATED, UNC-2A
- DLA DS51409 NOTICE 3-1997 SETSCREW, SLOTTED HEADLESS, CONE POINT CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51409 VALID NOTICE 2-1994 SETSCREW, SLOTTED HEADLESS, CONE POINT CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51409 VALID NOTICE 1-1988 SETSCREW, SLOTTED HEADLESS, CONE POINT CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51409-1982 SETSCREW, SLOTTED HEADLESS, CONE POINT CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51410 NOTICE 3-1997 SETSCRFW, SLOTTED HEADLESS, CUP POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51410 VALID NOTICE 2-1994 SETSCRFW, SLOTTED HEADLESS, CUP POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51410 VALID NOTICE 1-1988 SETSCRFW, SLOTTED HEADLESS, CUP POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51410-1982 SETSCRFW, SLOTTED HEADLESS, CUP POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51411 NOTICE 3-1997 SETSCREW, SLOTTED HEADLESS, FLAT POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51411 VALID NOTICE 2-1994 SETSCREW, SLOTTED HEADLESS, FLAT POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51411 VALID NOTICE 1-1988 SETSCREW, SLOTTED HEADLESS, FLAT POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA DS51411-1982 SETSCREW, SLOTTED HEADLESS, FLAT POINT, CARBON STEEL, CADMIUM PLATED, METRIC
- DLA MS35223 REV B NOTICE 1-1997 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM PLATED, NC-2A AND UNC-2A
- DLA MS35223 REV B (1)-1996 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM PLATED, NC-2A AND UNC-2A
- DLA MS35223 REV B-1973 SCREW, MACHINE, PAN HEAD, SLOTTED, CARBON STEEL, CADMIUM PLATED, NC-2A AND UNC-2A
- DLA MIL-DTL-13791/22-2009 MACHINE-PAN HEAD SCREW, CROSS-RECESSED, CARBON STEEL, PROPER PROTECTED COATING PLATED, UNC-2A
- DLA MIL-W-81381/18 VALID NOTICE 4-2013 Wire, Electric, Fluorocarbon/Polyimide Insulated Light Weight, Nickel Coated Copper, 600 Volts Nominal 4.6 Mil Wall
Aerospace Industries Association, carbon plater carbon
- AIA NASM21318-1998 Screw, Drive, Round Head, Type U, Steel, Carbon, Cadmium Plated FSC 5305
- AIA NASM35206-1999 Screw, Machine-Pan Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNC-2A FSC 5305
- AIA NASM35207-1999 Screw, Machine-Pan Head, Cross Recessed, Carbon Steel, Cadmium Plated, UNF-2A (IN./MM) FSC 5305
- AIA NASM35191-1998 Screw, Machine - 82 Degree Flat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNF-2A FSC 5305
- AIA NASM35190-1998 Screw, Machine-82 Degree Flat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmiun Plated, UNC-2A FSC 5305
- AIA NASM24629-1998 Screw, Tapping-Thread Cutting, Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated FSC 5305
The American Road & Transportation Builders Association, carbon plater carbon
- AASHTO M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
- AASHTO T 217-2002(R2006) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- AASHTO T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- AASHTO T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
Xinjiang Provincial Standard of the People's Republic of China, carbon plater carbon
- DB65/T 3831-2015 Low-carbon high-strength hot-dip galvanized steel coil for strapping
Professional Standard - Military and Civilian Products, carbon plater carbon
- WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations
Hunan Provincial Standard of the People's Republic of China, carbon plater carbon
KE-KEBS, carbon plater carbon
- KS 06-75-1978 KENYA STANDARD SPECIFICATION FOR GALVANIZED MILD STEEL DUSTBINS
Professional Standard - Electricity, carbon plater carbon
- DL/T 1865-2018 Calibration procedures for trace total organic carbon analyzers
VN-TCVN, carbon plater carbon
- TCVN 6525-2008 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- TCVN 7859-2008 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
Aerospace Industries Association/ANSI Aerospace Standards, carbon plater carbon
- AIA/NAS NASM21318-2014 SCREW, DRIVE, ROUND HEAD, TYPE U, STEEL, CARBON, CADMIUM PLATED (Rev 2)
- AIA/NAS NAS 1043-1960 Shackle-Chain, Forged Carbon Steel, Screw Pin (for Ground Support Equipment) (Rev. 1)
- AIA/NAS NAS 1046-1956 Clip-Wire Rope, Forged Carbon Steel (for Ground Support Equipment)
- AIA/NAS NAS 1042-1978 Shackle-Anchor, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2)
- AIA/NAS NAS 1044-1978 Shackle-Chain, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2)
- AIA/NAS NASM35191-2016 SCREW, MACHINE, 82° FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNF-2A (Rev 2)
- AIA/NAS NASM35191-2011 SCREW, MACHINE, 82° FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNF-2A (Rev 1)
- AIA/NAS NAS 1047-1996 Turnbuckle Assembly, Forged Carbon Steel, Jaw and Jaw (for Ground Support Equip) Rev. 4
- AIA/NAS NAS 1051-1994 Safety Hook, Forged Carbon Steel, Snap, Direct Eye (for Ground Support Equipment) (Rev. 2)
- AIA/NAS NASM35207-2015 SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, CADMIUM PLATED, UNF-2A (IN./MM) (Rev 3)
- AIA/NAS NASM24629-2011 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G, OR T, PAN HEAD, CRUCIFORM RECESSED, CARBON STEEL, CADMIUM PLATED (Rev 1)
- AIA/NAS NASM35190-2014 SCREW, MACHINE, 82? FLAT COUNTERSUNK HEAD, CRUCIFORM RECESS, CARBON STEEL, CADMIUM PLATED, SELF-LOCKING AND NON-LOCKING, UNC-2A (Rev 2)
- AIA/NAS NASM35190-2015 SCREW, MACHINE, 82? FLAT COUNTERSUNK HEAD, CRUCIFORM RECESS, CARBON STEEL, CADMIUM PLATED, SELF-LOCKING AND NON-LOCKING, UNC-2A (Rev 3)
CZ-CSN, carbon plater carbon
- CSN 42 0669 Cast.6-1985 Chemical analysis of non-ferrous metals and alloys. Cobalt. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 42 0691 Cast.4-1985 Chemical analysis of non-ferrous metals and alloys. Titanium. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 70 4241-1967 Glass apparatus for the determination of carbon in technical iron
- CSN 42 0620 Cast.16-1981 Chemical analysis of non-ferrous metals and alloys. Brasses. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 42 0622 Cast.20-1981 Chemical analysis of non-ferrous metals and alloys. Bronzes. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 42 0641 Cast.11-1984 Chemical analysis of non-ferrous metals and alloys. Nickel alloys. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
Professional Standard - Traffic, carbon plater carbon
- JT/T 1013-2015 Vehicle fuel consumption instrument based on carbon balance method
Group Standards of the People's Republic of China, carbon plater carbon
- T/CSEA 22-2022 Technical specifications for nickel carbide composite electroplating for pump barrels of oil well pumps
- T/NAIA 0208-2023 Determination of Stable Isotope Ratio of Carbon and Nitrogen in Lycium Barbarum by Stable Isotope Analyzer Method
Professional Standard - Non-ferrous Metal, carbon plater carbon
- YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium
Professional Standard - Coal, carbon plater carbon
- MT/T 228-2005 General specification for carbon and hydrogen analyzer-Gravimetric method
- MT/T 939-2005 General specification for carbon and hydrogen analyzer-coulometric and gravimetric method
Professional Standard - Environmental Protection, carbon plater carbon
- HJ/T 104-2003 The technical requirement for water quality automatic analyzer of total organic carbon
KR-KS, carbon plater carbon
- KS C 6597-2007(2023) Installation, operation and maintenance of carbon monoxide detection instruments
- KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
- KS P ISO 7787-4-2018 Dental rotary instruments — Cutters — Part 4: Miniature carbide laboratory cutters
- KS I ISO TR 12148-2022 Natural gas Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
ES-AENOR, carbon plater carbon
Canadian Standards Association (CSA), carbon plater carbon
American National Standards Institute （ANSI), carbon plater carbon
- ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector
国家质量监督检验检疫总局, carbon plater carbon
- SN/T 4764-2017 Elemental analyzer method for determination of carbon, hydrogen, nitrogen and sulfur content in coal
Association Francaise de Normalisation, carbon plater carbon
- NF A37-501:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
- NF A37-501:1997 Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions.
- NF X34-117:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods.
- NF A46-402*NF EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
- NF X34-220:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- NF A46-402:1992 Cold rolled uncoated low carbon and high yeld strength steel flat products for cold forming. Tolerances on dimensions and shape.
- NF EN ISO 21663:2020 Combustibles solides de récupération - Méthodes de détermination de la teneur en carbone (C), hydrogène (H), azote (N) et soufre (S) par la méthode instrumentale
Professional Standard - Aviation, carbon plater carbon
- HB/Z 5099.4-2000 Analysis method for silver plating solution Determination of potassium carbonate content in hard silver solution through potentiometric titration
- HB/Z 5099.3-2000 Analytical method of electroplating silver solution Potentiometric titration determination of potassium carbonate content in electroplating silver solution
- HB 7407-1996 Minimum performance requirements for civil aircraft carbon monoxide detectors
- HB/Z 5086.4-2000 Analytical method for cyanide electroplating copper solution Potentiometric titration for determination of sodium carbonate content
- HB/Z 5084.3-2000 Analytical method of cyanide electroplating zinc solution for determination of sodium carbonate content by potentiometric titration
- HB/Z 5085.4-1999 Analytical method of cadmium electroplating solution for cyanide electroplating Determination of sodium carbonate content by potentiometric titration
- HB/Z 5095.3-2004 Methods for analysis of cyaniding plating brass solutions-part 3:Determination of sodium carbonate content by potentiometric titrimetric method
NEMA - National Electrical Manufacturers Association, carbon plater carbon
- NEMA HP 100.1-1985 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS
(U.S.) Ford Automotive Standards, carbon plater carbon
- FORD ESB-M1A34-A-2002 STEEL, LOW CARBON STAPLING WIRE - GALVANIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD FLTM BA 113-1-2001 SPOT WELDING ACCEPTANCE TEST FOR ZINC, ZINC/IRON AND ZINC/ALLOY COATED LOW CARBON STEEL SHEET (Replaces FLTM BA 013-01)
- FORD WSS-M4D813-B1-2012 POLYCARBONATE + ABS BLEND, (PC+ABS) PLATING GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D813-B1-2016 POLYCARBONATE + ABS BLEND, (PC+ABS) PLATING GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD FLTM BU 101-07-2000 DETERMINATION OF SHEAR ADHESION OF POLYCARBONATE FILM INSTRUMENT DIAL APPLIQUES
- FORD WSB-M4D813-A-2012 POLYCARBONATE + ABS BLEND, (PC+ABS) HIGH IMPACT, PLATING GRADE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
SE-SIS, carbon plater carbon
- SIS SS-EN 10 142-1991 Continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming — Technical delivery conditions
Guangxi Provincial Standard of the People's Republic of China, carbon plater carbon
- DB45/T 2517-2022 Oxidation-capture coupled treatment of carbon steel galvanized pickling waste acid technical regulations
ISA - International Society of Automation, carbon plater carbon
Danish Standards Foundation, carbon plater carbon
- DS/ISO 29541:2011 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- DS/EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- DS/ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- DS/EN ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
Lithuanian Standards Office , carbon plater carbon
- LST EN 15104-2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
AT-ON, carbon plater carbon
- ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
- ONORM EN 10142-1991 Contlnuously hot-dip zinc coated low carbon steel sheet and strip for cold forming — Technical delivery conditions
BE-NBN, carbon plater carbon
- NBN-EN 10142-1991 Continously hot-dip zinc coated low carbon steel sheet and strip tor cold torming - Technical delivery conditions
Professional Standard - Petrochemical Industry, carbon plater carbon
- SH/T 0656-1998 Standard test methods for instrumental determination of carbon,hydrogen,and nitrogen in petroleum products and lubricants
Jiangsu Provincial Standard of the People's Republic of China, carbon plater carbon
- DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials
Professional Standard - Energy, carbon plater carbon
- NB/SH/T 0656-2017 Determination of Carbon, Hydrogen and Nitrogen in Petroleum Products and Lubricants Elemental Analyzer Method
国家能源局, carbon plater carbon
- SH/T 0656-2017 Elemental analyzer method for determination of carbon, hydrogen and nitrogen in petroleum products and lubricants
PL-PKN, carbon plater carbon
- PN M69433-1988 Welding Coated steel electrodes for arc welding of high strength Iow carbon and Iow alloy steels
- PN-EN ISO 21663-2021-06 E Solid recovered fuels -- Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
Professional Standard - Commodity Inspection, carbon plater carbon
- SN/T 3005-2011 Test method for instrumental determination of carbon,hydrogen,nitrogen and sulfur in organic chemicals
GM Daewoo, carbon plater carbon
ES-UNE, carbon plater carbon
- UNE-EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
European Association of Aerospace Industries, carbon plater carbon
- AECMA PREN 2160-1985 Aerospace Series Flexible Wire Ropes for Aircraft Controls in Zinc Coated Carbon Steel Construction - Dimensions - Loads Edition 2
Standard Association of Australia （SAA）, carbon plater carbon
IT-UNI, carbon plater carbon
- UNI EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
Aerospace, Security and Defence Industries Association of Europe (ASD), carbon plater carbon
- ASD-STAN PREN 2160-1985 Aerospace Series Flexible Wire Ropes for Aircraft Controls in Zinc Coated Carbon Steel Construction - Dimensions - Loads (Edition 2)
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., carbon plater carbon
- ASHRAE 3973-1996 Laboratory Evaluation of Ozone as a Corrosion Inhibitor for Carbon Steel@ Copper@ and Galvanized Steel in Cooling Water (RP-747)
工业和信息化部, carbon plater carbon
- YS/T 1179.3-2017 Methods for chemical analysis of aluminum slag Part 3: Determination of carbon and nitrogen content Elemental analyzer method
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, carbon plater carbon
- PREN 2160-1985 Aerospace Series Flexible Wire Ropes for Aircraft Controls in Zinc Coated Carbon Steel Construction - Dimensions - Loads (Edition 2)