ZH

RU

ES

Carbon injector

Carbon injector, Total:329 items.

In the international standard classification, Carbon injector involves: Surface treatment and coating, Ferrous metals, Powder metallurgy, Equipment for the chemical industry, Cutting tools, On-board equipment and instruments, Pipeline components and pipelines, Iron and steel products, Analytical chemistry, Electric traction equipment, Diagnostic, maintenance and test equipment, Medical equipment, Pharmaceutics, Equipment for petroleum and natural gas industries, Coals, Extraction and processing of petroleum and natural gas, Electricity. Magnetism. Electrical and magnetic measurements, Terminology (principles and coordination), Linear and angular measurements, Resistors, Environmental testing, Air quality, Wastes, Non-ferrous metals, Products of non-ferrous metals, Mining equipment, Non-metalliferous minerals, Environmental protection, Fuels, Inorganic chemicals, Materials for aerospace construction, Products of the chemical industry, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Fasteners, Alarm and warning systems, Coatings and related processes used in aerospace industry, Protection against fire, Refrigerating technology, Road vehicles in general, Chipless working equipment, Water quality, Textile fibres, Testing of metals, Road engineering, Petroleum products in general, Lubricants, industrial oils and related products, Organic chemicals, Farming and forestry, Paints and varnishes, Non-destructive testing, Particle size analysis. Sieving, Natural gas, Measurement of fluid flow, Optics and optical measurements, Dentistry, Aerosol containers, Physics. Chemistry, Reinforced plastics.


Society of Automotive Engineers (SAE), Carbon injector

AT-ON, Carbon injector

  • ONORM E 1355-1959
  • ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
  • OENORM EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Carbon injector

  • GB/T 26053-2023 Carbide based thermal spray powder
  • GB/T 30733-2014 Determination of total carbon, hydrogen and nitrogen content in coal.Instrumental method
  • GB/T 5237.5-2000 Wrought aluminum alloy extruded profiles for architecture Part 5:PVDF coating profiles
  • GB 5237.5-2004 Wrought aluminium alloy extruded profiles for architecture Part 5:PVDF coating profiles
  • GB 5237.5-2008 Wrought aluminium alloy extruded profiles for architecture.Part 5:PVDF coating profiles
  • GB/T 8359-1987 Carbides in high speed steel--Quantitative phase analysis--Method of X-ray diffractometer
  • GB/T 11190-1989 Operating light-and water-exposure apparatus(carbon-arc type) and testing method for testing paint, varnish, lacquer, and related products
  • GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys--Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus

German Institute for Standardization, Carbon injector

  • DIN 28115:2003 Carbon steel nozzles - PN 10 to PN 40
  • DIN 28115:2003-02 Carbon steel nozzles - PN 10 to PN 40
  • DIN 43264-1:1976 Pantograph carbons; carbons and socket-sections
  • DIN EN ISO 11124-4:1997 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993); German version EN ISO 11124-4:1997
  • DIN EN ISO 11124-3:1997 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993); German version EN ISO 11124-3:1997
  • DIN 51732:2014 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
  • DIN 51732:2007 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
  • DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
  • DIN EN ISO 21663:2021-03 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020); German version EN ISO 21663:2020
  • DIN EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods; German version EN 15104:2011
  • DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments

Professional Standard - Machinery, Carbon injector

  • JB/T 6974-1993 Wirebar spray coated carbon steels and stainless steels
  • JB/T 10988-2010 Special products of silicon carbide-Reaction bonded silicon carbide-Desuphating nozzles
  • JB/T 20178-2017 Pharmaceutical grade water.Total organic carbon analyzer
  • JB/T 6831-1993 Carbon fiber pointer for electric measuring instrument
  • JB/T 5915-2006 Sequential type pulse jet controller for baghouse
  • JB/T 5915-2013 Sequential type pulse jet controller for baghouse
  • JB/T 5915-1991 Technical conditions of sequential pulse injection electric controller for bag filter
  • JB/T 8354.4-2015 Metallic abrasives of shot blast cleaning and peening.Part 4: Low carbon cast steel shot
  • JB/T 8354.2-2015 Metal abrasives for shot peening and strengthening - Part 2: High carbon cast steel shot
  • JB/T 8354.3-2015 Metal abrasives for shot peening and strengthening - Part 3: High carbon cast steel grit

National Metrological Verification Regulations of the People's Republic of China, Carbon injector

United States Navy, Carbon injector

Professional Standard - Non-ferrous Metal, Carbon injector

  • YS/T 429.2-2000 Aluminum curtain wall panel Fluorocarbon painted aluminum veneer
  • YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium

Professional Standard - Aviation, Carbon injector

  • HB 7627-1998 Quality Inspection of Wear-resistant Coatings of Tungsten Carbide and Chromium Carbide by Explosive Spraying
  • HB 6813.4-1993 Parts nozzles for measuring tools of pneumatic measuring instruments
  • HB 6813.3-1993 Parts nozzles for measuring tools of pneumatic measuring instruments (D=5~8)
  • HB 6813.10-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)
  • HB 6813.11-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)
  • HB 7407-1996 Minimum performance requirements for civil aircraft carbon monoxide detectors

SAE - SAE International, Carbon injector

  • SAE AS412A-1956 Carbon Monoxide Detector Instruments
  • SAE AMS2431-5B-2018 Peening Media Conditioned Carbon Steel Cut Wire Shot@ Regular Hardness (45 to 52 HRC) (AWCR)
  • SAE AMS2431/3E-2019 Peening Media Conditioned Carbon Steel Cut Wire Shot@ Regular Hardness (45 to 52 HRC) (AWCR)
  • SAE AMS2431/8C-2019 Peening Media Conditioned Carbon Steel Cut Wire Shot@ High Hardness (55 to 62 HRC) (AWCH)
  • SAE AMS2449A-2018 Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels
  • SAE AMS2449-2004 Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels

Japanese Industrial Standards Committee (JISC), Carbon injector

  • JIS G 3454:2017 Carbon steel pipes for pressure service
  • JIS K 0805:1988 Continuous total organic carbon analyzer
  • JIS B 7951:1986 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7951:2004 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7987:2006 Continuous analyzers for carbon monoxide in flue gas
  • JIS M 7605:1993 Detector tube type carbon monoxide measuring instruments (Colour-intensity)
  • JIS B 7986:2006 Continuous analyzers for carbon dioxide in flue gas
  • JIS M 7650:1993 Detector tube type carbon monoxide measuring instruments (Length-of-stain)
  • JIS B 7951:1998 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7753:1993 Light-exposure and light-and-water-exposure apparatus (Open-flame sunshine carbon-arc type)
  • JIS D 1029:1979 Testing method for simplified carbon monoxide testers for automobiles
  • JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

Professional Standard - Customs, Carbon injector

  • HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

Defense Logistics Agency, Carbon injector

Professional Standard - Petroleum, Carbon injector

  • SY/T 6299-1997 Core carbonate content analyser
  • SY/T 6842-2011 Through-tube carbon/oxygen logging tool
  • SY 6842-2011 Through-tubing carbon-oxygen ratio energy spectrum logging tool
  • SY/T 5693-2008 Specification for calibration of the C/O spectrum logging tool
  • SY/T 6809-2010 Calibration method for carbonate analyser of rock
  • SY 6809-2010 Calibration Methods for Rock Carbonate Analyzers
  • SY 5693-2008 Calibration specification for carbon-oxygen ratio energy spectrum logging tool
  • SY/T 5693-1995 Technical Regulations for Maintenance and Calibration of Carbon-Oxygen Ratio Spectrum Logging Tool

National Metrological Technical Specifications of the People's Republic of China, Carbon injector

Professional Standard - Traffic, Carbon injector

  • JT/T 638-2005 Cleaning and detecting instrument for spray nozzles of vehicle engine
  • JT/T 1013-2015 Vehicle fuel consumption instrument based on carbon balance method

RO-ASRO, Carbon injector

  • STAS 11607-1981 LOW AND MEDIUM ALLOYED CARBON STEELS Spectrographic analysis
  • STAS 10539-1976 FUELS FOR JET ENGINES Determination of naphtalenic hydrocarbons by the spectrophotometric method
  • STAS SR EN 27787-3-1995 Dental rotary instruments. Cutters. Part 3: Carbide laboratory cutters for millirtg machines

Indonesia Standards, Carbon injector

  • SNI ISO 9918:2008 Safety requirement of capnometers use for human
  • SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers
  • SNI 06-2509-1991 Water, Test methods for carbonate pesticide content by gas chromatography apparatus
  • SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation

International Organization for Standardization (ISO), Carbon injector

  • ISO 9918:1993 Capnometers for use with humans; requirements
  • ISO 3930:1976 Road vehicles — Carbon monoxide analyser equipment — Technical specifications
  • ISO/TS 12902:2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
  • ISO/FDIS 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
  • ISO/CD 29541:1976 Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method
  • ISO 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
  • ISO 29541:2010 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
  • ISO/DIS 5533 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
  • ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
  • ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
  • ISO 21663:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
  • ISO 8252:1987 Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus

RU-GOST R, Carbon injector

  • GOST ISO 9918-2012 Capnometers for use with humans. Requirements
  • GOST R ISO 9918-1999 Capnometers for use with humans. Requirements
  • GOST R 54244-2010 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
  • GOST 32979-2014 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
  • GOST 17750-1972 Jet fuel. Method for the determination luminometric number on the PLCHT instrument
  • GOST 17749-1972 Iet fuel. Spectrophotometric method for the determination of dicycles aromatic (naphthalene hydrocarbons) content
  • GOST 32985-2014 Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods
  • GOST R 54216-2010 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods
  • GOST 22091.2-1984 X-ray devices. The methods of measuring of the current and the voltage of injection of X-ray betatrons
  • GOST 33513-2015 Solid recovered fuel. Determination of carbon (C), hydrogen (H) and nitrogen (N) content by instrumental method
  • GOST R ISO 10238-2015 Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Determination of sulfur content by an instrumental method
  • GOST 8.586.3-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements

煤炭工业部, Carbon injector

  • MT 228-1990 Technical conditions of carbon and hydrogen analyzer in coal

国家煤矿安全监察局, Carbon injector

  • MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal

ES-AENOR, Carbon injector

Korean Agency for Technology and Standards (KATS), Carbon injector

  • KS R 3033-1984 Simplified carbonmonoxide testers for automobiles
  • KS R 3033-2013 Simplified carbonmonoxide testers for automobiles
  • KS R 3033-1984(2011) Simplified carbonmonoxide testers for automobiles
  • KS C 5116-2003 Fixed carbon composition resistors for use in electronic equipment
  • KS B 5358-1987 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5358-2001 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5358-1982 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5357-1981 Continuous analyzers for hydrocarbons in ambient air
  • KS B 5358-1987(2022) Continuous analyzer for carbon monoxide in ambient air
  • KS B 5358-1987(2017) Continuous analyzer for carbon monoxide in ambient air
  • KS C 6597-2007(2018) Installation, operation and maintenance of carbon monoxide detection instruments
  • KS B 5357-1981(2021) Continuous analyzers for hydrocarbons in ambient air
  • KS R 1051-2013 Testing methods for simplified carbonmonoxide testers for automobiles
  • KS R 1051-2006(2011) Testing methods for simplified carbonmonoxide testers for automobiles
  • KS R 1051-1986 Testing methods for simplified carbonmonoxide testers for automobiles
  • KS M ISO 11124-4:2003 Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives-Part 4:Low-carbon cast-steel shot
  • KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
  • KS M ISO 11124-3:2008 Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives-Part 3:High-carbon cast-steel shot and grit
  • KS M 2418-2006 Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
  • KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
  • KS I ISO TR 12148-2011(2021) Natural gas-Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
  • KS M ISO 10238:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
  • KS M 2418-2006(2016) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
  • KS M ISO 10238:2013 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
  • KS P ISO 7787-4:2018 Dental rotary instruments — Cutters — Part 4: Miniature carbide laboratory cutters
  • KS M 2418-2006(2021) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants

Professional Standard - Military and Civilian Products, Carbon injector

  • WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations

Hunan Provincial Standard of the People's Republic of China, Carbon injector

GM North America, Carbon injector

  • GM GMP.PC.008-1999 Polycarbonate - UV Stabilized, Injection Molding Grade
  • GM GMP.ASA+PC.001-2011 ASA+PC - Weatherable, Injection Molding Grade (Issue 4; Do Not Use on New Programs; Replaced by GMW15583)

U.S. Air Force, Carbon injector

American Water Works Association (AWWA), Carbon injector

Military Standard of the People's Republic of China-General Armament Department, Carbon injector

  • GJB 10016-2021 Radiographic real-time imaging detection method of carbon/carbon throat lining products for solid rocket motor nozzles
  • GJB 8711-2015 Specification for carbon fiber integrally braided composite linings for long tail nozzle convergence sections

Professional Standard - Electricity, Carbon injector

  • DL/T 1865-2018 Calibration procedures for trace total organic carbon analyzers

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Carbon injector

  • GB/T 5237.5-2008 Wrought aluminium alloy extruded profiles for architecture - Part 5: PVDF coating profiles

CZ-CSN, Carbon injector

  • CSN 42 0669 Cast.6-1985 Chemical analysis of non-ferrous metals and alloys. Cobalt. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 42 0691 Cast.4-1985 Chemical analysis of non-ferrous metals and alloys. Titanium. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 70 4241-1967 Glass apparatus for the determination of carbon in technical iron
  • CSN 42 0620 Cast.16-1981 Chemical analysis of non-ferrous metals and alloys. Brasses. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 42 0622 Cast.20-1981 Chemical analysis of non-ferrous metals and alloys. Bronzes. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 42 0641 Cast.11-1984 Chemical analysis of non-ferrous metals and alloys. Nickel alloys. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN EN 50053-1-1994 Requirements for selection,installation and use of electrostatic spraying equipment for flammable materials.Part 1:Hand-held electrostatic paint spray guns with an energy limit of 0,24 mj and their associated apparatus

Qinghai Provincial Standard of the People's Republic of China, Carbon injector

  • DB63/T 1612-2017 Chemical analysis method for fixed carbon in carbonate-containing graphite ore Nitric acid treatment High-frequency infrared carbon-sulfur analyzer method

GM Holden Ltd, Carbon injector

Group Standards of the People's Republic of China, Carbon injector

  • T/CAEPI 6-2017 Technical specifications of Pulse Jet Controller for Baghouse
  • T/NAIA 0208-2023 Determination of Stable Isotope Ratio of Carbon and Nitrogen in Lycium Barbarum by Stable Isotope Analyzer Method
  • T/SPSTS 013-2019 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
  • T/CSTM 00340-2020 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
  • T/NAIA 0135-2022 Determination of carbon, hydrogen and nitrogen in coal-based Fischer-Tropsch synthetic liquid fuel oil and chemicals Elemental analyzer method

European Committee for Standardization (CEN), Carbon injector

  • EN ISO 11124-3:2018 Preparation of Steel Substrates before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 3: High-Carbon Cast-Steel Shot and Grit
  • EN ISO 11124-3:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 3: High-Carbon Cast-Steel Shot and Grit
  • EN 15767-2:2009 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 2: Water nozzles
  • EN ISO 11124-4:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 4: Low-Carbon Cast-Steel Shot
  • EN 50053-1:1987 Requirements for the selection, installation and use of electrostatic spraying equipment for flammable spraying materials. Part 1: Hand-held electrostatic paint spray guns with an energy limit of O.24 mJ and their associated apparatus
  • EN 50053-2:1989 Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials; part 2: hand-held electrostatic powder spray guns with an energy limit of 5 mJ and their associated apparatus
  • EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
  • EN 50053-3:1989 Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials; part 3: hand-held electrostatic flock spray guns with an energy limit of 0,24 mJ or 5 mJ and their associated apparatus
  • EN ISO 21663:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
  • EN ISO 8503-2:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Proce

American Society for Testing and Materials (ASTM), Carbon injector

  • ASTM D5373-93(2002) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
  • ASTM D5373-93(1997) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
  • ASTM D5373-16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
  • ASTM D5373-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
  • ASTM D5373-02(2007) Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
  • ASTM D7055-04 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
  • ASTM D7649-10 Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis
  • ASTM D1735-14 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
  • ASTM D7055-09 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
  • ASTM D7055-14 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
  • ASTM E1009-95(2006) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
  • ASTM D4308-95(2000) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4308-95 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM G152-05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM D5373-08 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
  • ASTM D7055-19 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
  • ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
  • ASTM G153-04 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-04 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM E1260-95 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
  • ASTM G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM D5291-01 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM G152-00a Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-00 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G152-00ae1 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM D5291-10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM E2872-14 Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
  • ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
  • ASTM G153-00a Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G153-00ae1 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G153-00 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM D5291-92 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM D5291-96 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM G152-13(2021) Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM D5291-16 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM D5291-10(2015) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM D5291-09 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM E1260-03 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
  • ASTM E1260-03(2020) Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
  • ASTM E2872-14(2019) Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
  • ASTM F1978-12 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  • ASTM D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
  • ASTM D5291-02(2007) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
  • ASTM E191-64(2005) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM E1009-95(2000) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel

Professional Standard - Coal, Carbon injector

  • MT/T 228-2005 General specification for carbon and hydrogen analyzer-Gravimetric method
  • MT/T 939-2005 General specification for carbon and hydrogen analyzer-coulometric and gravimetric method

Professional Standard - Environmental Protection, Carbon injector

  • HJ/T 104-2003 The technical requirement for water quality automatic analyzer of total organic carbon

Aerospace Industries Association/ANSI Aerospace Standards, Carbon injector

  • AIA/NAS NAS 1043-1960 Shackle-Chain, Forged Carbon Steel, Screw Pin (for Ground Support Equipment) (Rev. 1)
  • AIA/NAS NAS 1046-1956 Clip-Wire Rope, Forged Carbon Steel (for Ground Support Equipment)
  • AIA/NAS NAS 1042-1978 Shackle-Anchor, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2)
  • AIA/NAS NAS 1044-1978 Shackle-Chain, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2)
  • AIA/NAS NAS 1047-1996 Turnbuckle Assembly, Forged Carbon Steel, Jaw and Jaw (for Ground Support Equip) Rev. 4
  • AIA/NAS NAS 1051-1994 Safety Hook, Forged Carbon Steel, Snap, Direct Eye (for Ground Support Equipment) (Rev. 2)

KR-KS, Carbon injector

  • KS C 6597-2007(2023) Installation, operation and maintenance of carbon monoxide detection instruments
  • KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
  • KS P ISO 7787-4-2018 Dental rotary instruments — Cutters — Part 4: Miniature carbide laboratory cutters
  • KS I ISO TR 12148-2022 Natural gas Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)

Professional Standard - Petrochemical Industry, Carbon injector

  • SH/T 0616-1995 Method for Determination of Water Separation Index of Jet Fuel (Portable Separator Method)
  • SH/T 0656-1998 Standard test methods for instrumental determination of carbon,hydrogen,and nitrogen in petroleum products and lubricants

Canadian Standards Association (CSA), Carbon injector

American National Standards Institute (ANSI), Carbon injector

  • ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector

国家质量监督检验检疫总局, Carbon injector

  • SN/T 4764-2017 Elemental analyzer method for determination of carbon, hydrogen, nitrogen and sulfur content in coal

IT-UNI, Carbon injector

  • UNI EN 5-1979
  • UNI EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method

Taiwan Provincial Standard of the People's Republic of China, Carbon injector

  • CNS 11177-1989 Hoses, Nozzles, Nozzle Valves and Hoses Reel for Moveable Carbon Dioxide,Halon and Dry Chemical Power of Fire Extinguise

NEMA - National Electrical Manufacturers Association, Carbon injector

  • NEMA HP 100.1-1985 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS

British Standards Institution (BSI), Carbon injector

  • BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
  • BS EN 15104:2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
  • BS ISO 5533:2023 Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
  • BS DD CEN/TS 15104:2006 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
  • BS DD CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
  • PD ISO/TR 12148:2009 Natural gas. Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
  • DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
  • 22/30448285 DC BS ISO 5533. Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
  • BS EN ISO 11124-4:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
  • BS EN ISO 21663:2020 Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
  • 20/30366878 DC BS EN ISO 21663. Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method

GB-REG, Carbon injector

  • REG NASA-TP-2047-1982 Effect of shot peening on surface fatigue life of carburized and hardened AISI 9310 spur gears

CEN - European Committee for Standardization, Carbon injector

  • EN ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot
  • PD CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon@ hydrogen and nitrogen - Instrumental methods

Association Francaise de Normalisation, Carbon injector

  • NF X34-117:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods.
  • NF P98-707:2009 Road construction and maintenance equipment - Hydrocarbon binder spreader/sprayer - Terminology and nomenclature.
  • NF T35-505-3:1997 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 3 : high-carbon cast-steel shot and grit.
  • NF X34-220:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
  • NF EN ISO 21663:2020 Combustibles solides de récupération - Méthodes de détermination de la teneur en carbone (C), hydrogène (H), azote (N) et soufre (S) par la méthode instrumentale

ISA - International Society of Automation, Carbon injector

Danish Standards Foundation, Carbon injector

  • DS/ISO 29541:2011 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
  • DS/EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
  • DS/ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
  • DS/EN ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)

Lithuanian Standards Office , Carbon injector

  • LST EN 15104-2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
  • LST EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)

ZA-SANS, Carbon injector

  • SANS 12902:2007 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods

Professional Standard - Ferrous Metallurgy, Carbon injector

  • YB/T 5336-2006 Quantitative Analysis of Carbide Phase in High Speed Steel by X-ray Diffraction Method

Jiangsu Provincial Standard of the People's Republic of China, Carbon injector

  • DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

Professional Standard - Energy, Carbon injector

  • NB/SH/T 0656-2017 Determination of Carbon, Hydrogen and Nitrogen in Petroleum Products and Lubricants Elemental Analyzer Method

国家能源局, Carbon injector

  • SH/T 0656-2017 Elemental analyzer method for determination of carbon, hydrogen and nitrogen in petroleum products and lubricants

American Gas Association, Carbon injector

  • AGA TOMS-2003 The Theory and Operations of Meter Shop Sonic Nozzle Proving Systems for the Natural Gas Industry

(U.S.) Ford Automotive Standards, Carbon injector

Professional Standard - Commodity Inspection, Carbon injector

  • SN/T 3005-2011 Test method for instrumental determination of carbon,hydrogen,nitrogen and sulfur in organic chemicals

IN-BIS, Carbon injector

ES-UNE, Carbon injector

  • UNE-EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)

American Gear Manufacturers Association, Carbon injector

  • AGMA 98FTM3-1998 Basic Studies on Fatigue Strength of Case-Hardened Gear Steel - Effects of Shot Peening and/or Barrelling Processes

The American Road & Transportation Builders Association, Carbon injector

  • AASHTO T 217-2002(R2006) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
  • AASHTO T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
  • AASHTO T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester

AASHTO - American Association of State Highway and Transportation Officials, Carbon injector

  • T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
  • T 217-1987 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
  • T 217-2002 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
  • T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
  • T 217-1996 Standard Specification for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester (Nineteenth Edition)

Standard Association of Australia (SAA), Carbon injector

  • AS 3580.7.1:2011
  • AS 3580.7.1:2011/Amdt 1:2012
  • AS 3580.7.1:1992 Methods for sampling and analysis of ambient air - Determination of carbon monoxide - Direct-reading instrumental method
  • AS 2365.2:1993 Methods for the sampling and analysis of indoor air - Determination of carbon monoxide - Direct-reading portable instrument method
  • AS 3580.7.1:2023 Methods for sampling and analysis of ambient air, Method 7.1: Determination of carbon monoxide — Direct-reading instrumental method
  • AS 2365.2:1993(R2014)
  • AS 1038.6.4:2005 Coal and coke - Analysis and testing - Higher rank coal and coke - Ultimate analysis - Carbon, hydrogen and nitrogen - Instrumental method

工业和信息化部, Carbon injector

  • YS/T 1179.3-2017 Methods for chemical analysis of aluminum slag Part 3: Determination of carbon and nitrogen content Elemental analyzer method

PL-PKN, Carbon injector

  • PN-EN ISO 21663-2021-06 E Solid recovered fuels -- Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)

SE-SIS, Carbon injector

  • SIS SS-EN 50 053-2-1990 Requirements for the selection, installation anduse of electrostatic spraying equipment for flammable materials Part 2. Hand-held electrostatic powderspray guns with an energy limit of 5 mJ and their associated apparatus
  • SIS SS-EN 50 053-1-1990 Requirements for the selection, installation anduse of e/ectrostatic spraying equipment for flammable materials Part 1. Hand-held e/ectrostatic paint spray guns with an energy limit of 0,24 mJ and their associated apparatus

CH-SNV, Carbon injector

  • SN EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved