ZH
RU
ES
carbon meter carbon line
carbon meter carbon line, Total:500 items.
In the international standard classification, carbon meter carbon line involves: Analytical chemistry, Iron and steel products, Electric traction equipment, On-board equipment and instruments, Pipeline components and pipelines, Springs, Water quality, Non-metalliferous minerals, Medical equipment, Pharmaceutics, Equipment for petroleum and natural gas industries, Coals, Testing of metals, Electrical wires and cables, Extraction and processing of petroleum and natural gas, Electricity. Magnetism. Electrical and magnetic measurements, Diagnostic, maintenance and test equipment, Terminology (principles and coordination), Fuels, Components for aerospace construction, Insulation, Resistors, Environmental testing, Air quality, Materials for aerospace construction, Materials for the reinforcement of composites, Non-destructive testing, Surface treatment and coating, Products of the textile industry, Non-ferrous metals, Mining equipment, Inorganic chemicals, Environmental protection, Products of the chemical industry, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Fasteners, Alarm and warning systems, Optics and optical measurements, Refrigerating technology, Road vehicles in general, Products of non-ferrous metals, Ferroalloys, Packaging materials and accessories, Textile fibres, Refractories, Mechanical testing, Welding, brazing and soldering, Power stations in general, Fluid power systems, Natural gas, Petroleum products in general, Lubricants, industrial oils and related products, Organic chemicals, Farming and forestry, Heat treatment, Semiconducting materials, Power transmission and distribution networks, Reinforced plastics, Energy and heat transfer engineering in general, Ferrous metals, Metalliferous minerals, Dentistry, Coatings and related processes used in aerospace industry, Wastes, Packaging machinery, Physics. Chemistry, Domestic, commercial and industrial heating appliances.
Professional Standard - Customs, carbon meter carbon line
- HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer
National Metrological Verification Regulations of the People's Republic of China, carbon meter carbon line
Taiwan Provincial Standard of the People's Republic of China, carbon meter carbon line
German Institute for Standardization, carbon meter carbon line
- DIN 43264-1:1976 Pantograph carbons; carbons and socket-sections
- DIN 43186:1964 Pantograph carbons for tramways
- DIN EN ISO 13002:1999-01 Carbon fibre - Designation system for filament yarns (ISO 13002:1998); German version EN ISO 13002:1998
- DIN 51732:2014 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN 51732:2007 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
- DIN EN ISO 21663:2021-03 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020); German version EN ISO 21663:2020
Aerospace Industries Association/ANSI Aerospace Standards, carbon meter carbon line
- AIA/NAS NAS 1046-1956 Clip-Wire Rope, Forged Carbon Steel (for Ground Support Equipment)
- AIA/NAS NAS 1043-1960 Shackle-Chain, Forged Carbon Steel, Screw Pin (for Ground Support Equipment) (Rev. 1)
- AIA/NAS NAS 1042-1978 Shackle-Anchor, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2)
- AIA/NAS NAS 1044-1978 Shackle-Chain, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2)
- AIA/NAS NAS 1047-1996 Turnbuckle Assembly, Forged Carbon Steel, Jaw and Jaw (for Ground Support Equip) Rev. 4
- AIA/NAS NAS 1051-1994 Safety Hook, Forged Carbon Steel, Snap, Direct Eye (for Ground Support Equipment) (Rev. 2)
Society of Automotive Engineers (SAE), carbon meter carbon line
- SAE AS412B-2001 Carbon Monoxide Detector Instruments
- SAE AS412A-1991 CARBON MONOXIDE DETECTOR INSTRUMENTS
- SAE AS412B-2008 Carbon Monoxide Detector Instruments
- SAE AMS-QQ-W-428-1998 Wire, Steel, Carbon (High Carbon, Round, For Mechanical Springs, General Purpose)
- SAE AMS-QQ-W-428A-2013 Wire, Steel, Carbon (High Carbon, Round, For Mechanical Springs, General Purpose)
- SAE AMS5115-1942 STEEL SPRING WIRE Heat Treated - Carbon
- SAE AMS-QQ-W-428/1A-2003 Wire, Steel, High Carbon, Round, Type I
- SAE AMS-QQ-W-428/2A-2003 Wire, Steel, High Carbon, Round, Type III
- SAE AMS-QQ-W-428/1-2001 Wire, Steel, High Carbon, Round, Type I
- SAE AMS-QQ-W-428/1A-2013 Wire, Steel, High Carbon, Round, Type I
- SAE AMS-QQ-W-428/2-2001 Wire, Steel, High Carbon, Round, Type III
- SAE AMS-QQ-W-428/2A-2013 Wire, Steel, High Carbon, Round, Type III
- SAE AMS5061F-2004 Steel, Low Carbon, Bars and Wire 0.08 to 0.20 C
- SAE AMS5115H-1999 Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered
- SAE AMS5115G-1994 WIRE, CARBON STEEL 0.60 - 0.75C Hardened and Tempered
- SAE AMS5115H-2013 Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered
- SAE J316-1988 OIL TEMPERED CARBON STEEL SPRING WIRE AND SPRINGS
- SAE AMS5061G-2013 Steel, Low Carbon Bars, and Wire 0.08 - 0.20
- SAE AMS5061E-2000 Steel, Low Carbon, Bars and Wire 0.08 to 0.20 C
- SAE AMS-QQ-W-428/1A-2001 (Noncurrent)Wire, Steel, High Carbon, Round, Type I
- SAE AMS-QQ-W-428/2A-2001 (Noncurrent)Wire, Steel, High Carbon, Round, Type III
- SAE AMS5061G-2009 Steel, Low Carbon, Bars and Wire 0.08 to 0.20 C
- SAE J1268-2010 Hardenability Bands for Carbon and Alloy H Steels
- SAE AMS5112G-1977 CARBON STEEL WIRE Spring Quality Music Wire 0.70 - 1.00C
- SAE J351-1988 OIL TEMPERED CARBON STEEL VALVE SPRING QUALITY WIRE AND SPRINGS
- SAE AMS2431/8A-2006 Peening Media (AWCH) Conditioned Carbon Steel Cut Wire Shot, High Hardness
- SAE AMS3892B-2005 Fibers, Carbon, Tow and Yarn For Structural Composites
- SAE AMS3380C-1983 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
- SAE AMS3380B-1974 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
- SAE AMS3380A-1965 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
- SAE AMS3380-1960 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
- SAE AMS5110H-2001 Carbon Steel, Wire and Springs 0.75 0.88C (SAE 1080) Spring Temper, Cold Drawn
- SAE AMS5110J-2011 Carbon Steel, Wire and Springs 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn
- SAE AMS3380D-2012 Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced
- SAE AMS3380E-2019 Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced
- SAE AMSW21425A-2003 Wire, Steel, High Carbon, Square, Uncoated, For Mechanical Springs (General Purpose)
- SAE AMSW21425B-2005 Wire, Steel, High Carbon, Square, Uncoated, for Mechanical Springs (General Purpose)
- SAE AMSW21425-1999 Wire, Steel, High Carbon, Square, Uncoated, For Mechanical Springs (General Purpose)
- SAE AMS2431/3C-2006 Peening Media (AWCR) Conditioned Carbon Steel Cut Wire Shot, Regular Hardness (45 to 52 HRC)
- SAE AMS2431/8-1996 Peening Media (AWCH) Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 HRC)
- SAE AMS4776G-2005 Nickel Alloy, Brazing Filler Metal 73Ni 4.5Si 14Cr 3.1B 4.5Fe (Low Carbon) 1790 to 1970°F (977 to 1077°C) Solidus-Liquidus Range
SAE - SAE International, carbon meter carbon line
Japanese Industrial Standards Committee (JISC), carbon meter carbon line
TH-TISI, carbon meter carbon line
Defense Logistics Agency, carbon meter carbon line
- DLA QQ-W-414 B (1)-2002 WIRE, STEEL, CARBON: BOOKBINDER
- DLA QQ-W-414 B-1967 WIRE, STEEL, CARBON: BOOKBINDER
- DLA MIL-W-8957 A NOTICE 3-1997 WIRE, STEEL, CARBON, HIGH STRENGTH
- DLA MIL-W-8957 A REINST NOTICE 2-1984 WIRE, STEEL, CARBON, HIGH STRENGTH
- DLA MIL-W-8957 A-1966 WIRE, STEEL, CARBON, HIGH STRENGTH
CZ-CSN, carbon meter carbon line
- CSN 42 6450-1963 Carbon steel spring wire
- CSN 42 0669 Cast.6-1985 Chemical analysis of non-ferrous metals and alloys. Cobalt. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 42 0691 Cast.4-1985 Chemical analysis of non-ferrous metals and alloys. Titanium. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 70 4241-1967 Glass apparatus for the determination of carbon in technical iron
- CSN 42 0620 Cast.16-1981 Chemical analysis of non-ferrous metals and alloys. Brasses. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 42 0622 Cast.20-1981 Chemical analysis of non-ferrous metals and alloys. Bronzes. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
- CSN 42 0641 Cast.11-1984 Chemical analysis of non-ferrous metals and alloys. Nickel alloys. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
Korean Agency for Technology and Standards (KATS), carbon meter carbon line
- KS D 3554-2019 Low carbon steel wire rods
- KS D 3559-2007(2017) High carbon steel wire rods
- KS D 3554-1999 Low carbon steel wire rods
- KS D 3554-1986 Low carbon steel wire rods
- KS R 3033-1984 Simplified carbonmonoxide testers for automobiles
- KS R 3033-2013 Simplified carbonmonoxide testers for automobiles
- KS R 3033-1984(2011) Simplified carbonmonoxide testers for automobiles
- KS C 5116-2003 Fixed carbon composition resistors for use in electronic equipment
- KS B 5358-1987 Continuous analyzer for carbon monoxide in ambient air
- KS B 5358-2001 Continuous analyzer for carbon monoxide in ambient air
- KS B 5358-1982 Continuous analyzer for carbon monoxide in ambient air
- KS B 5357-1981 Continuous analyzers for hydrocarbons in ambient air
- KS B 5358-1987(2022) Continuous analyzer for carbon monoxide in ambient air
- KS B 5358-1987(2017) Continuous analyzer for carbon monoxide in ambient air
- KS D 7033-2008(2018) Carbon steels for cold heading－Part 2：Wires
- KS D 3592-2008(2018) Carbon steels for cold heading－Part 1：Wire rods
- KS C 6597-2007(2018) Installation, operation and maintenance of carbon monoxide detection instruments
- KS B 5357-1981(2021) Continuous analyzers for hydrocarbons in ambient air
- KS R 1051-2013 Testing methods for simplified carbonmonoxide testers for automobiles
- KS R 1051-2006(2011) Testing methods for simplified carbonmonoxide testers for automobiles
- KS R 1051-1986 Testing methods for simplified carbonmonoxide testers for automobiles
- KS M ISO 14420:2011 Carbonaceous products for the production of aluminium-Baked anodes and shaped carbon products-Determination of the coefficient of linear thermal expansion
- KS M ISO 14420:2016 Carbonaceous products for the production of aluminium－Baked anodes and shaped carbon products－Determination of the coefficient of linear thermal expansion
- KS M ISO 14420:2021 Carbonaceous products for the production of aluminium —Baked anodes and shaped carbon products —Determination of the coefficient of linear thermal expansion
- KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
- KS L ISO 10618:2018 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
- KS M 2418-2006 Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
- KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
- KS I ISO 6974-5:2006 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 5:Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons fora laboratory and on-line process application using three columns
- KS I ISO 6974-5:2015 Natural gas — Determination of composition and associated uncertainty by gas chromatography —Part 5: Isothermal method for nitrogen, carbon dioxide,C1 to C5 hydrocarbons and C6＋ hydrocarbons,
- KS I ISO TR 12148-2011(2021) Natural gas－Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
- KS M ISO 10238:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
- KS M 2418-2006(2016) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
- KS M ISO 10238:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
- KS P ISO 7787-4:2018 Dental rotary instruments — Cutters — Part 4: Miniature carbide laboratory cutters
- KS M 2418-2006(2021) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
GM Daewoo, carbon meter carbon line
RO-ASRO, carbon meter carbon line
- STAS 11607-1981 LOW AND MEDIUM ALLOYED CARBON STEELS Spectrographic analysis
- STAS SR EN 27787-3-1995 Dental rotary instruments. Cutters. Part 3: Carbide laboratory cutters for millirtg machines
IN-BIS, carbon meter carbon line
GM North America, carbon meter carbon line
Professional Standard - Petroleum, carbon meter carbon line
- SY/T 6299-1997 Core carbonate content analyser
- SY/T 6842-2011 Through-tube carbon/oxygen logging tool
- SY 6842-2011 Through-tubing carbon-oxygen ratio energy spectrum logging tool
- SY/T 5693-2008 Specification for calibration of the C/O spectrum logging tool
- SY/T 6809-2010 Calibration method for carbonate analyser of rock
- SY 6809-2010 Calibration Methods for Rock Carbonate Analyzers
- SY 5693-2008 Calibration specification for carbon-oxygen ratio energy spectrum logging tool
- SY/T 5693-1995 Technical Regulations for Maintenance and Calibration of Carbon-Oxygen Ratio Spectrum Logging Tool
Indonesia Standards, carbon meter carbon line
- SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers
- SNI ISO 9918:2008 Safety requirement of capnometers use for human
- SNI 07-0075-2006 Low carbon steel wire rods for electrical welded core wire
- SNI 06-2509-1991 Water, Test methods for carbonate pesticide content by gas chromatography apparatus
- SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation
Qinghai Provincial Standard of the People's Republic of China, carbon meter carbon line
- DB63/T 1612-2017 Chemical analysis method for fixed carbon in carbonate-containing graphite ore Nitric acid treatment High-frequency infrared carbon-sulfur analyzer method
Professional Standard - Machinery, carbon meter carbon line
- JB/T 20178-2017 Pharmaceutical grade water.Total organic carbon analyzer
- JB/T 6831-1993 Carbon fiber pointer for electric measuring instrument
- JB/T 6974-1993 Wirebar spray coated carbon steels and stainless steels
- JB/T 4278.17-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 17: Carbon black content test device
- JB/T 10896-2008 Technical requirement of heat treatment for pusher type controlled atmosphere carburizing line
International Organization for Standardization (ISO), carbon meter carbon line
- ISO 9918:1993 Capnometers for use with humans; requirements
- ISO 10120:1991 Carbon fibre; determination of linear density
- ISO 3930:1976 Road vehicles — Carbon monoxide analyser equipment — Technical specifications
- ISO 14420:2005 Carbonaceous products for the production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion
- ISO 14420:2020 Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion
- ISO/TS 12902:2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- ISO/FDIS 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
- ISO/CD 29541:1976 Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method
- ISO 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
- ISO 29541:2010 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- ISO/DIS 5533 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
- ISO 6974-5:2000 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line process application usi
- ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
- ISO 16574:2015 Determination of percentage of resolvable pearlite in high carbon steel wire rod
- KS I ISO 6974-4:2006 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 4:Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
- ISO 6974-4:2000 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxyde and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line measuring system using
- ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
RU-GOST R, carbon meter carbon line
- GOST ISO 9918-2012 Capnometers for use with humans. Requirements
- GOST R ISO 9918-1999 Capnometers for use with humans. Requirements
- GOST 28008-1988 Constructional carbon yarn. Specifications
- GOST R 54244-2010 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
- GOST 32665-2014 Carbon fibre. Designation system for filament yarns
- GOST 32979-2014 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
- GOST R ISO 14420-2014 Carbonaceous materials used in the production of aluminium. Prebaked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion
- GOST 32666-2014 Carbon fibre. Determination filament's diameter and cross-sectional area
- GOST R 54253-2010 Carbon materials. Test method for linear thermal expansion coefficient
- GOST 32985-2014 Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods
- GOST R 54216-2010 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods
- GOST 33513-2015 Solid recovered fuel. Determination of carbon (C), hydrogen (H) and nitrogen (N) content by instrumental method
- GOST R ISO 10238-2015 Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Determination of sulfur content by an instrumental method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, carbon meter carbon line
- GB/T 30733-2014 Determination of total carbon, hydrogen and nitrogen content in coal.Instrumental method
- GB/T 8359-1987 Carbides in high speed steel--Quantitative phase analysis--Method of X-ray diffractometer
- GB/T 3640-1988 Plain carbon steel pipes for electric wire
- GB/T 346-1984 Galvanized low carbon steel wire for electric communications lines
- GB 346-1984 Galvanized low carbon steel wire for communication lines
- GB/T 15247-1994 Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
- GB/T 4701.8-2009 Ferrotitanium-Determination of carbon content-The infrared absorption method
- GB/T 5059.7-2014 Ferromolybdenum.The determination of carbon content.Infrared absorption method
- GB/T 24583.4-2009 Vanadium.Nitrogen alloy.Determination carbon of content.The infrared absorption method
- GB/T 8705.1-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
- GB/T 4701.8-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of carbon content
- GB/T 4333.10-1990 Methods for chemical analysis of ferrosilicon--The infrared absorption method for the determination of carbon content
- GB/T 7731.10-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content
- GB/T 5059.7-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of carbon content
- GB/T 5687.5-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of carbon content
- GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
- GB/T 13193-1991 Water quality--Determination of TOC by nondispersive infrared absorption method
- GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
- GB 13193-1991 Determination of total organic carbon (TOC) in water by non-dispersive infrared absorption method
- GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- GB/T 4700.5-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method for the determination of carbon content
- GB/T 5686.5-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content
- GB/T 8704.1-2009 Ferrovanadium-Determination of carbon content-The infrared absorption method and the gasometric method
- GB/T 4699.4-1988 Methods for chemical analysis of silicochromium The infrared absorption method for the determination of carbon content
National Metrological Technical Specifications of the People's Republic of China, carbon meter carbon line
- JJF 2031-2023
- JJF 1405-2013 Program of Pattern Evaluation of Total Organic Carbon Analyzers
- JJF 1523-2015 Program of Pattern Evaluation of Carbon Monoxide and Carbon Dioxide Infrared Gas Analyzers
- JJF 1721-2018 Calibration Specification for Carbonization Depth Measuring Instruments and Calipers
煤炭工业部, carbon meter carbon line
- MT 228-1990 Technical conditions of carbon and hydrogen analyzer in coal
国家煤矿安全监察局, carbon meter carbon line
- MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal
Professional Standard - Ferrous Metallurgy, carbon meter carbon line
- YB/T 5336-2006 Quantitative Analysis of Carbide Phase in High Speed Steel by X-ray Diffraction Method
- YB/T 5305-2008 Carbon structural steel pipes for electric wire
- YB/T 5305-2006 Ordinary carbon steel wire casing
- YB/T 098-2012 Carbon steel wire strands for optical fiber cable tension members
- YB/T 5339-2015 Ferrophosphorus.Determination of carbon content.The infrared absorption method
- YB/T 910-2000 Method for the detedrmination of the baked linear shrinkage (or linear expansion) ratio of self-baking carbon block
- YB/T 4312-2012 Molybdenum oxide.Determination of carbon content.The infrared absorption method
- YB/T 109.6-2012 Silicon barium alloy.Determination of carbon content.The infrared absorption method
- YB/T 5339-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- YB/T 109.6-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the determination of carbon content
- YB/T 5316-2006 Calcium silicon alloy chemical analysis method Infrared absorption method for determination of carbon content
GM Europe, carbon meter carbon line
- GME QK 000198-1983 Polycarbonat -Formmasse, UV-stabilisiert Polycarbonate - Moulding Compounds, UV Stabilized
- GME QK 000169-1983 Polycarbonat - Formmasse, UV- und thermostabilisiert Polycarbonate - Moulding Compounds, UV- and Thermo Stabilized German
Hebei Provincial Standard of the People's Republic of China, carbon meter carbon line
Professional Standard - Military and Civilian Products, carbon meter carbon line
- WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations
Hunan Provincial Standard of the People's Republic of China, carbon meter carbon line
American Society for Testing and Materials (ASTM), carbon meter carbon line
- ASTM D5373-93(2002) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM D5373-93(1997) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM D5373-16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
- ASTM D5373-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM D5373-02(2007) Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
- ASTM A805-08 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
- ASTM A805/A805M-09(2021) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
- ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM B649-04 Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
- ASTM A805-93(2002) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
- ASTM A411-08(2017) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM D6317-98(2004) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D6317-98 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D6317-98(2009) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D5173-15 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
- ASTM A411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM A411-03 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM A411-08(2022) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM D5904-96 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D5904-02 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D5904-02(2009) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D5173-15(2023) Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
- ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D6317-15 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM E1009-95(2006) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
- ASTM D5997-96(2005) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D5997-96(2009) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D6745-06(2011) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
- ASTM D6745-01 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
- ASTM D6745-06 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
- ASTM A411-08 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM D6745-11 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
- ASTM D6745-11(2015) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
- ASTM A411-08(2013) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM D4308-95(2000) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
- ASTM D4308-95 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
- ASTM D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
- ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
- ASTM B649-95 Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
- ASTM F2191-02 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
- ASTM F2191-02(2008) Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
- ASTM D5173-97(2001) Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both or by High Temperature Combustion Followed by Gas Phase NDIR or by Electr
- ASTM F2191/F2191M-13 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
- ASTM G152-05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5373-08 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
- ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM B649-02 Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
- ASTM A1023/A1023M-02 Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
- ASTM G153-04 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G152-04 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
- ASTM D4839-94 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM G152-06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-01 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM G152-00a Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G152-00 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G152-00ae1 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM A1064/A1064M-18a Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A510-06 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
- ASTM G153-00a Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-00ae1 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-00 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-92 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D5291-96 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM G152-13 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-13 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM G152-13(2021) Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM D5291-16 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D5291-10(2015) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM D5291-09 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
International Federation of Trucks and Engines, carbon meter carbon line
- NAVISTAR CEMS A-1-2015 VOID - Hot Rolled Steel, Carbon And Alloy Bars And Carbon Wire Rods (Includes Appendix)
Professional Standard - Construction Industry, carbon meter carbon line
PL-PKN, carbon meter carbon line
- PN M80055-1973 Spring wires Carbon steel round wires
- PN H92608-1970 Carbon and alloy steel S?uare wire rod Dimensions
- PN C82055-13-1990 Test methods of pres&ed carbon products Determination of coefficient of linear thermal expansion
- PN C97085-1986 Carbochemical products UV Spectrophotometric determination of naphihalene in coal tar and coal tar oils
- PN C97089-1989 Carbochemical products UV spectrophotometric determination of anthracene in coal tar and coal tar oils
AIA/NAS - Aerospace Industries Association of America Inc., carbon meter carbon line
Professional Standard - Electricity, carbon meter carbon line
- DL/T 1865-2018 Calibration procedures for trace total organic carbon analyzers
- DL/T 2311-2021 Carbon fiber technical specification for composite core wire
- DL/T 5284-2012 Guide for construction and acceptance of carbon fibre complex core aluminium stranded wire
- DL/T 5284-2019 Guidelines for construction technology of overhead conductors with carbon fiber composite core
- DL/T 1615-2016 Technical guidelines for operation and maintenance of overhead conductors with carbon fiber composite core
British Standards Institution (BSI), carbon meter carbon line
- BS 2S 201:2004 Carbon steel wire rod, patented cold drawn carbon steel wire and springs - High duty unground wire - Specifcation
- BS 2S 201:2004+A1:2011 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty unground wire. Specification
- BS 2S 202:2004 Carbon steel wire rod, patented cold drawn carbon steel wire and springs - High duty ground wire - Specification
- BS 2S 202:2004+A1:2011 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty ground wire. Specification
- BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
- BS ISO 14420:2005 Carbonaceous products for the production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion
- BS ISO 14420:2020 Tracked Changes. Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion
- BS EN 15104:2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
- BS ISO 5533:2023 Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
- BS DD CEN/TS 15104:2006 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- BS DD CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
- PD ISO/TR 12148:2009 Natural gas. Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
- BS EN ISO 10618:2000 Carbon fibre - Determination of tensile properties of resin-impregnated yarns
- BS 7658-2:1993 Carbon fibre - Method for determination of linear density
- DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
- 22/30448285 DC BS ISO 5533. Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
- BS 7967-5:2010 Carbon monoxide in dwellings and other premises and the combustion performance of gas-fired appliances.Part 5: Guide for using electronic portable combustion gas analysers in non-domestic
premises for the measurement of carbon
monoxide and carbon dioxid
Association Francaise de Normalisation, carbon meter carbon line
- NF T25-103:1987 Carbon fibers. Determination of linear density.
- NF A04-111:1980 Iron and steel. Micrographic determination of the extent of decarburisation of non alloy high carbon steel wire rod.
- NF T25-110*NF EN ISO 13002:1999 Carbon fibre. Designation system for filament yarns.
- NF EN ISO 13002:1999 Fibres de carbone - Système de désignation des fils continus.
- NF X34-117:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods.
- NF EN ISO 10618:2005 Fibres de carbone - Détermination des propriétés en traction sur fils imprégnés de résine
- NF X34-220:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- NF A06-391*NF EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
- NF A54-106*NF ISO 7524:2020 Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
- NF EN ISO 21663:2020 Combustibles solides de récupération - Méthodes de détermination de la teneur en carbone (C), hydrogène (H), azote (N) et soufre (S) par la méthode instrumentale
Professional Standard - Traffic, carbon meter carbon line
- JT/T 1013-2015 Vehicle fuel consumption instrument based on carbon balance method
KR-KS, carbon meter carbon line
- KS D 7033-2008(2023) Carbon steels for cold heading－Part 2：Wires
- KS D 3592-2008(2023) Carbon steels for cold heading－Part 1：Wire rods
- KS C 6597-2007(2023) Installation, operation and maintenance of carbon monoxide detection instruments
- KS M ISO 14420-2016 Carbonaceous products for the production of aluminium－Baked anodes and shaped carbon products－Determination of the coefficient of linear thermal expansion
- KS M ISO 14420-2021 Carbonaceous products for the production of aluminium —Baked anodes and shaped carbon products —Determination of the coefficient of linear thermal expansion
- KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
- KS L ISO 10618-2018 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
- KS P ISO 7787-4-2018 Dental rotary instruments — Cutters — Part 4: Miniature carbide laboratory cutters
- KS I ISO TR 12148-2022 Natural gas Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
Group Standards of the People's Republic of China, carbon meter carbon line
- T/SQIA 055-2023 Technical requirements for carbon footprint assessment of antenna
- T/SQIA 056-2023 Technical requirements for carbon footprint assessment of information and communication technology cables
- T/ZGZS 0505-2023 Carbon footprint accounting method for recycled cotton yarn products
- T/GDPIA 45-2022 Ground calcium carbonate used for polyvinyl chloride(PVC) wire and cable
- T/TSSS 1-2022 General rules for carbon footprint evaluation of cable materials supply chain
- T/CEC 524.1～524.2-2021 Carbon fiber composite core wire supporting hardware technical conditions
- T/CIET 181-2023 Industrial Carbon Neutral Green Technology Evaluation Specification Magnet Wire
- T/IAWBS 016-2022 X-ray double crystal rocking curve FWHM test method for silicon carbide single wafer
- T/JSEE 011-2023 Technical specifications for X-ray detection of composite core damage of carbon fiber composite core conductors
- T/CEC 686-2022 Technical specifications for carbon monoxide online monitoring system for coal-fired boilers
- T/NAIA 0208-2023 Determination of Stable Isotope Ratio of Carbon and Nitrogen in Lycium Barbarum by Stable Isotope Analyzer Method
- T/CAS 454-2020 Technical Requirements for Online Monitoring of Carbon Dioxide Emissions in Thermal Power Plants
Professional Standard - Non-ferrous Metal, carbon meter carbon line
- YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium
- YS/T 447.2-2011 Alloy wires used for the grain refiner for aluminium and aluminium alloys.Part 2:Al-Ti-C wires
Professional Standard - Coal, carbon meter carbon line
- MT/T 228-2005 General specification for carbon and hydrogen analyzer-Gravimetric method
- MT/T 939-2005 General specification for carbon and hydrogen analyzer-coulometric and gravimetric method
Professional Standard - Environmental Protection, carbon meter carbon line
- HJ/T 104-2003 The technical requirement for water quality automatic analyzer of total organic carbon
HU-MSZT, carbon meter carbon line
Danish Standards Foundation, carbon meter carbon line
- DS/EN ISO 13002:1999 Carbon fibre - Designation system for filament yarns
- DS/ISO 29541:2011 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- DS/EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- DS/ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- DS/EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
Heilongjiang Provincial Standard of the People's Republic of China, carbon meter carbon line
- DB23/T 3461-2023 Technical Specifications for Baseline Investigation of Carbon Sequestration Resources
ES-AENOR, carbon meter carbon line
Canadian Standards Association (CSA), carbon meter carbon line
American National Standards Institute （ANSI), carbon meter carbon line
国家质量监督检验检疫总局, carbon meter carbon line
- SN/T 4764-2017 Elemental analyzer method for determination of carbon, hydrogen, nitrogen and sulfur content in coal
Military Standard of the People's Republic of China-General Armament Department, carbon meter carbon line
- GJB 10016-2021 Radiographic real-time imaging detection method of carbon/carbon throat lining products for solid rocket motor nozzles
Jiangsu Provincial Standard of the People's Republic of China, carbon meter carbon line
- DB3212/T 1125-2022 Specifications for the Construction of Carbon Emissions Online Monitoring System
- DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials
NEMA - National Electrical Manufacturers Association, carbon meter carbon line
- NEMA HP 100.1-1985 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS
Professional Standard - Aviation, carbon meter carbon line
- HB 7407-1996 Minimum performance requirements for civil aircraft carbon monoxide detectors
国家市场监督管理总局、中国国家标准化管理委员会, carbon meter carbon line
- GB/T 4333.10-2019 Ferrosilicon—Determination of carbon content—Infrared absorption method
- GB/T 7731.10-2021 Ferrotungsten—Determination of carbon content—Infrared absorption method
- GB/T 24583.4-2019 Vanadium-nitrogen—Determination of carbon content—Infrared absorption method
- GB/T 40789-2021 Gas analysis—Online automated measuring systems for content of carbon monoxide , carbon dioxide and oxygen—Determination of performance characteristics
- GB/T 14949.11-2021 Manganese ores—Determination of carbon content—Gravimetric method and infrared absorption method
- GB/T 40361-2021 Beer, carbonated beverage cans filling production line—General technical specifications
European Committee for Standardization (CEN), carbon meter carbon line
- EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
CEN - European Committee for Standardization, carbon meter carbon line
- PD CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon@ hydrogen and nitrogen - Instrumental methods
ISA - International Society of Automation, carbon meter carbon line
Lithuanian Standards Office , carbon meter carbon line
- LST EN 15104-2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- LST EN ISO 13002:2000 Carbon fibre - Designation system for filament yarns (ISO 13002:1998)
- LST EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
ZA-SANS, carbon meter carbon line
- SANS 12902:2007 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
American Petroleum Institute (API), carbon meter carbon line
- API RP 1133-2017 Guidelines for Onshore Hydrocarbon Pipelines Affecting High Consequence Floodplains
AENOR, carbon meter carbon line
AT-ON, carbon meter carbon line
- ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
- ONORM M 3215 Teil.1-1974 Broad strip steel; hot rolled mild steel coils; dimensions and masses; permissible deviations
(U.S.) Ford Automotive Standards, carbon meter carbon line
- FORD ESB-M99J357-A-2012 COATING, FLUOROCARBON, COIL COATED ALUMINUM STAINLESS STEEL OR LOW CARBON STEEL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD FLTM BU 101-07-2000 DETERMINATION OF SHEAR ADHESION OF POLYCARBONATE FILM INSTRUMENT DIAL APPLIQUES
KE-KEBS, carbon meter carbon line
- KS 04-290-1981 KENYA STANDARD SPECIFICATION FOR MILD STEEL WIRE FOR ARMOURING OF ELECTRIC CABLES
工业和信息化部, carbon meter carbon line
- YB/T 4566.8-2016 Determination of carbon content of vanadium iron nitride by infrared absorption method
- YB/T 4582.10-2017 Determination of carbon content in silicon ferronitride by infrared absorption method
- YB/T 4726.8-2021 Determination of carbon content in iron dust mud by infrared absorption method
- YB/T 5316-2016 Determination of carbon content of calcium silicon alloy by high frequency combustion infrared absorption method
- YS/T 1179.3-2017 Methods for chemical analysis of aluminum slag Part 3: Determination of carbon and nitrogen content Elemental analyzer method
American Society of Mechanical Engineers (ASME), carbon meter carbon line
- ASME SEC II B SB-649-2001 Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire ASTM B649-95
Professional Standard - Petrochemical Industry, carbon meter carbon line
- SH/T 0656-1998 Standard test methods for instrumental determination of carbon,hydrogen,and nitrogen in petroleum products and lubricants
Professional Standard - Energy, carbon meter carbon line
- NB/SH/T 0656-2017 Determination of Carbon, Hydrogen and Nitrogen in Petroleum Products and Lubricants Elemental Analyzer Method
国家能源局, carbon meter carbon line
- SH/T 0656-2017 Elemental analyzer method for determination of carbon, hydrogen and nitrogen in petroleum products and lubricants
Aerospace Industries Association, carbon meter carbon line
- AIA NAS 1046-1956 Clip-Wire Rope, Forged Carbon Steel (for Ground Support Equipment) R(1994)
Professional Standard - Commodity Inspection, carbon meter carbon line
- SN/T 3005-2011 Test method for instrumental determination of carbon,hydrogen,nitrogen and sulfur in organic chemicals
未注明发布机构, carbon meter carbon line
- DIN EN 13002-2:1999 Carbon fiber yarns – Part 2: Test methods and general specifications
- BS 2S 203:2004(2011) Carbon steel wire rod, wire and springs — High duty unground wire — Hardened and tempered — Specification
ES-UNE, carbon meter carbon line
- UNE-EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
SE-SIS, carbon meter carbon line
- SIS MNC 990-1990 Welding electrodes — Tubular wires for gas metal are welding and metal are welding of carbon steels, carbon-manganese steels and microalloyed steels — Summary
IECQ - IEC: Quality Assessment System for Electronic Components, carbon meter carbon line
The American Road & Transportation Builders Association, carbon meter carbon line
- AASHTO T 217-2002(R2006) Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- AASHTO T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- AASHTO T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
AASHTO - American Association of State Highway and Transportation Officials, carbon meter carbon line
- T 217-2014 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- T 217-1987 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- T 217-2002 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
- T 217-2013 Standard Method of Test for Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester
Standard Association of Australia （SAA）, carbon meter carbon line
IT-UNI, carbon meter carbon line
- UNI EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
European Association of Aerospace Industries, carbon meter carbon line
- AECMA PREN 2962-1987 Aerospace Series Carbon Fibre Filament Yarn (Polyacrylonitrile Precursor) Technical Specification