ZH
RU
ES

steel3-point bending

steel3-point bending, Total:463 items.

In the international standard classification, steel3-point bending involves: Materials for aerospace construction, Paper and board, Glass, Plastics, Farming and forestry, Reinforced plastics, Adhesives, Rubber and plastics products, Inorganic chemicals, Refractories, Construction equipment, Ceramics, Products of the textile industry, Testing of metals, Paints and varnishes, Solar energy engineering, Medical equipment, Structures of buildings, Valves, Pipeline components and pipelines, Iron and steel products, Welding, brazing and soldering, Construction materials, Road vehicle systems, Insulating materials, Mechanical testing, Footwear, Textile machinery, Linear and angular measurements, Construction industry, Shipbuilding and marine structures in general, Waxes, bituminous materials and other petroleum products, Aerosol containers, Products of the chemical industry, Wood-based panels, Plant and equipment for the food industry, Materials for the reinforcement of composites, Magnetic materials, Raw materials for rubber and plastics, Coatings and related processes used in aerospace industry, Fasteners, Technical drawings, Earthworks. Excavations. Foundation construction. Underground works, Paper products, Electronic display devices.

German Institute for Standardization, steel3-point bending

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003
DIN EN ISO 899-2:2015-06 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015 / Note: To be replaced by DIN EN ISO 899-2 (2023-03) (in preparation).
DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 18800-3:2008-11 Steel structures - Part 3: Stability - Buckling of plates
DIN EN ISO 899-2:2023-03 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO/DIS 899-2:2023); German and English version prEN ISO 899-2:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN ISO 899-2 (2015-06).
DIN 9003-1:1984-10 Aerospace; bending of sheets, plates and strips of steel and heat-resisting alloys, bending radii, directions for design
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; English version of DIN EN 1966:2009-07
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN 18800-2:1990 Structural steelwork; analysis of safety against buckling of linear members and frames
DIN EN 2831:1993-04 Aerospace series; hydrogen embrittlement of steels; test by slow bending; german version EN 2831:1993
DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
DIN EN 2831:1993 Aerospace series; hydrogen embrittlement of steels; test by slow bending; german version EN 2831:1993
DIN 2916:1975 Bending Radii for Seamless and Welded Steel Tubes; Design Sheet
DIN 9003-1:1984 Aerospace; bending of sheets, plates and strips of steel and heat-resisting alloys, bending radii, directions for design
DIN ISO 7884-7:1998 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 18800-2:2008 Steel structures - Part 2: Stability - Buckling of bars and skeletal structures
DIN ISO 7884-7:1998-02 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN EN 10111:1998 Continuously hot-rolled low carbon steel sheet and strip for cold bending - Technical delivery conditions; German version EN 10111:1998
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN ISO 7884-4:1998 Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending (ISO 7884-4:1987)
DIN EN ISO 899-2:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015

British Standards Institution (BSI), steel3-point bending

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS ISO 5628:2019 Tracked Changes. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 2831:1993 Hydrogen embrittlement of steels - Test by slow bending
23/30449747 DC BS EN ISO 899-2. Plastics. Determination of creep behaviour - Part 2. Flexural creep by three-point loading
BS EN 1966:2002 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method
BS EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
BS ISO 11485-3:2014 Glass in building. Curved glass. Requirements for curved tempered and curved laminated safety glass
BS 7034-7:1988 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
PD IEC/TR 63114:2018 Electrical steel. Reverse bend test method for electrical steel strip and sheet
BS EN 524-3:1997 Steel strip sheaths for prestressing tendons - Test methods - To-and-fro bending test
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS ISO 11093-6:2007 Paper and board - Testing of cores - Determination of bending strength by the three-point method
BS EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Flexural creep by three-point loading
BS 8666:2000 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 8666:2005 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete — Specification
BS 7034-4:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS IEC 61747-40-2:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)
BS ISO 22389-2:2020 Timber structures. Bending applications of I-beams - Component performance and manufacturing requirements
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS 7034-7:1989 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
20/30403583 DC BS 8666. Scheduling, dimensioning, cutting and bending of steel reinforcement for concrete. Specification

FI-SFS, steel3-point bending

SFS-ISO 6602 E:1986 This standard is approved in English
SFS 5426-1988 In case of interpretation disputes the Finnish text applies

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, steel3-point bending

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

American Society for Testing and Materials (ASTM), steel3-point bending

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM F2606-08 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM F2606-08(2014) Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2021) Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D3061-97(2003) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
ASTM D3061-97e1 Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
ASTM D3061-97(2008) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
ASTM D3061-97(2013) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM D7250/D7250M-20 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM E1315-93 Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM E2948-16a Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E2948-22 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

AENOR, steel3-point bending

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
UNE-EN 2831:1996 AEROSPACE SERIES. HYDROGEN EMBRITTLEMENT OF STEELS. TEST BY SLOW BENDING.
UNE-EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
UNE 7306:1974 PREPARATION OF STEEL TEST PIECES WITH COL DEFORMATION AGEING FOR IMPACT BENDING TEST.

American National Standards Institute （ANSI), steel3-point bending

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/TAPPI T836 om-2013 Bending stiffness, four point method
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
ANSI/AISI S911-2008 Method For Flexural Testing Cold-formed Steel Hat Shaped Beams
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending
ANSI/AISI S910-2013 Test Method for Distortional Buckling of Cold-Formed Steel Hat Shaped Compression Members

RU-GOST R, steel3-point bending

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 19771-1993 Roll-formed steel equal leg angles. Dimensions
GOST 11474-1976 Bent-steel sections. Specifications
GOST 19771-1974 Roll-formed steel equal leg angles. Dimensions
GOST 19772-1993 Roll-formed steel unequal leg angles. Dimensions
GOST 19772-1974 Roll-formed steel unequal leg angles. Dimensions
GOST 8283-1993 Bent steel hat equal sections. Dimensions
GOST 8283-1977 Cold-formed equal omega-shaped steel. Range
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 30456-1997 Metal production. Rolled steel and tubes. Methods of blow bending tests
GOST 30245-2003 Steel bent closed welded square and rectangular section for building constructions. Specifications
GOST 30245-1994 Steel bent closed welded square and rectanqular section for building. Specifications
GOST 30245-2012 Steel bent closed welded square and rectangular section for building. Specifications
GOST 25577-1983 Steel bent closed welded square and restangular sections. Specifications

Association Francaise de Normalisation, steel3-point bending

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
NF EN 1966:2009 Adhésifs structuraux - Caractérisation d'une surface par mesure de l'adhérence au moyen de la méthode de la flexion en trois points
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF A03-157:1978 IRON AND STEEL. BEND TEST ON STEEL.
NF T76-143*NF EN 1966:2009 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
NF T54-606:1987 Structures sandwich à base de plastiques - Essai de flexion.
NF A03-402:1983 Iron and steel. Fatigue test by rotary flexion.
NF T51-103-2/A1*NF EN ISO 899-2/A1:2015 Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading - Amendment 1
NF EN ISO 899-2/A1:2015 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points - Amendement 1
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF A49-858:1988 Steel tubes. Bend test on test pieces taken from tubes.
NF A49-031:1979 Steel tubes. Bending radii. Recommended minimum values for unalloyed steel tubes.
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF L10-113*NF EN 2831:1993 Aerospace series. Hydrogen embrittlement of steels. Test by slow bending.
NF EN 2831:1993 Série aérospatiale - Fragilisation des aciers par l'hydrogène - Essai par flexion lente
NF P78-217-3*NF ISO 11485-3:2014 Glass in building - Curved glass - Part 3 : requirements for curved tempered and curved laminated safety glass
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)
NF EN 2746:1998 Série aérospatiale - Plastiques renforcés au verre textile - Essai de flexion. Méthode des trois pannes.
NF A03-158:1978 IRON AND STEEL. SIMPLE BEND TEST ON STEEL SHEET AND STRIP UNDER 3 MM THICK (FROM AND INCLUDING 0,5 MM UP TO BUT EXCLUDING 3 MM).
NF A03-159:1978 IRON AND STEEL. REVERSE BEND TEST ON STEEL SHEET AND STRIP UNDER 3 MM THICK (FROM AND INCLUDING 0,5 MM UP TO BUT EXCLUDING 3 MM).

European Committee for Standardization (CEN), steel3-point bending

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN ISO 899-2:1996 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 1993
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN ISO 899-2:2003 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 2003
prEN ISO 899-2 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO/DIS 899-2:2023)
EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
EN 1966:2002 Structural adhesives Characterisation of a surface by measuring adhesion by means of the three point bending method Supersedes ENV 1966: 1995
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN 2831:1993 Aerospace series; hydrogen embrittlement of steels; test by slow bending
prEN 524-3-1991 Steel strip sheaths for prestressing tendons; methods of test, to-and-frobending test
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)

Danish Standards Foundation, steel3-point bending

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/ISO 5177:1982 Fusion welded butt joints in steel. Transverse side bend test
DS/EN 2831:1993 Aerospace series. Hydrogen embrittlement of steels. Test by slow bending
DS/ISO 5173:1982 Fusion welded butt joints in steel. Transverse root and face bend test
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Lithuanian Standards Office , steel3-point bending

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
LST EN 2831-2001 Aerospace series - Hydrogen embrittlement of steels - Test by slow bending
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

International Organization for Standardization (ISO), steel3-point bending

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO/R 167:1960 Bend test on steel tubes
ISO/R 85:1959 Bend test for steel
ISO 10065:1990 Steel bars for reinforcement of concrete - Bend and rebend tests
ISO/DIS 899-2:1968 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 899-2:2003/Amd 1:2015 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
ISO 144:1973 Steel - Reverse bend testing of wire
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 5177:1981 Fusion welded butt joints in steel; Transverse side bend test
ISO/R 87:1959 Simple bend testing of steel sheet and strip less than 3 mm thick
ISO/R 88:1959 Reverse bend testing of steel sheet and strip less than 3 mm thick
ISO 2851:1973 Metal pipes and fittings — Stainless steel bends and tees for the food industry
ISO 2851:1993 Stainless steel bends and tees for the food industry
ISO 11485-3:2014 Glass in building - Curved glass - Part 3: Requirements for curved tempered and curved laminated safety glass
ISO 5173:1981 Fusion welded butt joints in steel; Transverse root and face bend test

AT-ON, steel3-point bending

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
ONORM B 4650 Teil.7-1980 Steel structures; buckling of spherical Shells
ONORM B 4650 Teil.4-1977 Steel structures; buckling of circular cylindrical Shells
ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)
ONORM M 3124 Teil.1-1973 Sheet (sheet and strip) of soft unalloyed steel; Drawing quality; Quality Specifications.
ONORM EN 2831-1993 Aerospace series - Hydrogen embrittlement of steels -Test by slow bending
ONORM A 6220-2001 Reinforced concrete constructions - Construction drawings for reinforcement bars - Representation, bending shapes, steel scheduling
ONORM M 3124 Teil.2-1973 Sheet (sheet and strip) of soft unalloyed steel; cold rolled in a certain tensile strength; Quality Specifications.w
ONORM B 4650 Teil.5-1980 Steel structures; buckling of circular cylindrical Shells with gradually varying thickness
ONORM M 9535 Teil.4-1985 Steel wireropes; mining ropes; number of bendings of round wires for used winding ropes in shafts for man winding

Korean Agency for Technology and Standards (KATS), steel3-point bending

KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS D ISO 10065-2002(2007) Steel bars for reinforcement of concrete?Bend and rebend tests
KS M ISO 899-2-2016(2021) Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS D ISO 10065:2002 Steel bars for reinforcement of concrete &##8211;Bend and rebend tests
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS D 3869-2009 Bending and cutting of steel bars for reinforced concrete
KS L 2401-1995 Testing method for annealing point and strain point of glass by beam bending
KS D 3869-2009(2019) Bending and cutting of steel bars for reinforced concrete
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS L 2401-2009(2019) Testing method for annealing point and strain point of glass by beam bending
KS D ISO 2851:2005 Stainless steel bends and tees for the food industry
KS D ISO 2851:2011 Stainless steel bends and tees for the food industry
KS B ISO 2851-2003(2008) Stainless steel bends and tees for the food industry
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method
KS C IEC TR 63114:2021 Electrical steel — Reverse bend test method for electrical steel strip and sheet
KS L ISO 7884-7:2014 Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
KS L ISO 7884-7-2014(2019) Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
KS B ISO 2851:2003 Stainless steel bends and tees for the food industry
KS B ISO 2851:2013 Stainless steel bends and tees for the food industry
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS L ISO 7884-4:2003 Glass－Viscosity and viscometric fixed points－Part 4：Determination of viscosity by beam bending
KS L ISO 7884-4-2003(2018) Glass－Viscosity and viscometric fixed points－Part 4：Determination of viscosity by beam bending
KS R ISO 13216-1-2015(2020) Road vehicles－Anchorages in vehicles and attachments to anchorages for child restraint systems－Part 1：Seat bight anchorages and attachements

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, steel3-point bending

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)
PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

国家市场监督管理总局、中国国家标准化管理委员会, steel3-point bending

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method

Professional Standard - Construction Industry, steel3-point bending

JG/T 5081-1996 Reinforcing bar bending machines

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, steel3-point bending

GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 12347-1996 Steel wire rope--Bending fatigue testing
GB/T 12347-2008 Steel wire ropes.Bending fatigue testing
GB/T 21472-2008 Stainless steel bends and tees for the food industry

BE-NBN, steel3-point bending

NBN 117.32-1963
NBN T 41-002-1977 Glass reinforced plastics - Determination of flexural properties - Three point method
NBN E 29-318-1989
NBN I 10-205-1986
NBN 927-1971
NBN 816-F-1969

CU-NC, steel3-point bending

NC 04-17-1968 Bend test for steel
NC 04-18-1968 Simple bending of steel Thickness less than 3 mm

PK-PSQCA, steel3-point bending

PS 244-1964 BEND TEST FOR STEEL
PS 245-1963 REVERSE BEND TESTING OF STEEL WIRE
PS 608-1967 PAKISTAN STANDARD SPECIFICATION FOR BEND TEST ON STEEL TUBES
PS 532-1965 SIMPLE BEND TESTING OF STEEL SHEET AND STRIPLESS THAN 3mm THICK (18")

SE-SIS, steel3-point bending

SIS 11 26 26-1966 Bend testing of reinforcing steel bar
SIS SS 11 26 27-1981 Steel — Reinforcing bar — Reverse bend testing
SIS SS 81 26 82-1989 Reinforcement bars — Bending — Nominal radii and diameters of bending tools
SIS 11 26 27-1965 Reverse bend testing of reinforcing steel bar

Professional Standard - Ferrous Metallurgy, steel3-point bending

YB/T 5126-2003 Steel bars for reinforcement of concrete-Bend and rebend tests
YB/T 5126-1993 Steel bars for reinforcement of concrete-Bend and rebend tests
YB/T 4288-2012 Steel wire ropes for elevators.Bending fatigue testing

Group Standards of the People's Republic of China, steel3-point bending

T/JNMIA 002-2020 CNC Rebar Bending Machine
T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/ZZB 2342-2021 Exposed curved steel pipe element
T/QYSJLXH 003-2020 Technical specification for steel bar bending testing machine
T/CMA YJ069-0201 Technical Requirements for Measurement of Steel Bar Bending Testing Machine

Professional Standard - Medicine, steel3-point bending

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

Malaysia Standards, steel3-point bending

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

KR-KS, steel3-point bending

KS M ISO 899-2-2016 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS D ISO 2851-2005 Stainless steel bends and tees for the food industry
KS C IEC TR 63114-2021 Electrical steel — Reverse bend test method for electrical steel strip and sheet

VN-TCVN, steel3-point bending

TCVN 6287-1997 Steel bars for reinforcement of concrete.Bend and rebend tests

RO-ASRO, steel3-point bending

STAS SR ISO 10065:1995 Steel bars for reinforcement of concrete. Bend and rebend tests
STAS 10897/3-1982 BRAZED JOINTS IMPACT BENDING TEST
STAS 1177-1974 Tests of metals REVERSE BEND TESTING OF STEEL WIRES
STAS 8979-1971 Tests of metals SIMPLE BENDING TEST OF STEEL SHEETS AND STRIPS
STAS 5540/8-1988 MECHANICAL TESTS OF FRICTION WELDED BUTT JOINTS Bending test
STAS 1303-1971 Forged steel threaded fittings NP 100 ELBOWS, TEES, CROSSES Dimensions

CEN - European Committee for Standardization, steel3-point bending

DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method

未注明发布机构, steel3-point bending

DIN EN 1966:2003 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

ET-QSAE, steel3-point bending

ES G.B8.311-1973

Indonesia Standards, steel3-point bending

SNI 07-4076-1996 Method of free bend test for butt welded joint
SNI 07-4599-1998 Zinc coated welded steel wire net bending fences

ZA-SANS, steel3-point bending

SANS 282:2004 Bending dimensions and scheduling of steel reinforcement for concrete
SANS 6112:1988 Bending modulus of steel shanks for footwear

TH-TISI, steel3-point bending

TIS 2246.2-2005 Plastics.determination of creep behaviour.part 2: flexural creep by three.point loading

Society of Automotive Engineers (SAE), steel3-point bending

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J524-2007 Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
SAE J524-1996 Seamless Low-Carbon Steel Tubing Annealed for Bending and flaring
SAE J524-1986 SEAMLESS LOW CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J2613-2002 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE J525-2007 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for bending and Flaring
SAE J525-1999 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for bending and Flaring
SAE J525-1986 WELDED AND COLD DRAWN LOW CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J526-2010 Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming and Brazing
SAE J2467-2008 Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring
SAE J526-2022 Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming, and Brazing

European Association of Aerospace Industries, steel3-point bending

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1
AECMA PREN 2831-1990 Aerospace Series Hydrogen Embrittlement of Steels Test by Slow Bending Edition 1

PT-IPQ, steel3-point bending

NP EN 524-2-2000 Steel strip sheaths for prestressing tendons Test methods Part 2:Determination of flexural behaviour
NP 850-1985
NP EN 524-3-2000 Steel strip sheaths for prestressing tendons Test methods Part 3:To-and-fro bending test

American Gear Manufacturers Association, steel3-point bending

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 2003-C10-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth

AGMA - American Gear Manufacturers Association, steel3-point bending

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
09FTM13-2009 Bending Fatigue@ Impact and Pitting Resistance of Ausform Finished P/M Gears

AR-IRAM, steel3-point bending

IRAM 2582-1962

HU-MSZT, steel3-point bending

VE-FONDONORMA, steel3-point bending

ESDU - Engineering Sciences Data Unit, steel3-point bending

ESDU 71027 A-2013 Endurance of high strength steels (in bending)
ESDU 71027 A-1974 Endurance of high strength steels (in bending).
STRUCT 01.06.03-1956 Form factors for angle@ tee and channel sections under combined bending and axial load.
ESDU 81007-1981 Fatigue strength in bending of steel I-beams with welded attachments.
ESDU 81007-2013 Fatigue strength in bending of steel I-beams with welded attachments
ESDU 78023 A-2013 Fatigue strength of transverse fillet welded joints and attachments in steels under bending loading
ESDU 78023 A-1982 Fatigue strength of transverse welded joints and attachments in steels under bending loading.

PL-PKN, steel3-point bending

PN H04405-1962 Double bend test wi?h additional reverse bending for s?eel sheets
PN H04407-1990 Metals Reverse bend testing of sheet and strip
PN H54118-1964 Chassis de moulage en profils plies Trous ?Pair
PN H54113-1964 Chassis de moulage en profils plies Elements de transport
PN H54117-1964 Chassis de moulage en profils plies Armements
PN H54119-1964 Chassis de moulage en profils plies Dispositions de jonction
PN H54120-1964 Ch§ssis de moulageen profils plies Spec?fications techni?ues
PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

Defense Logistics Agency, steel3-point bending

DLA MIL-W-12133/5 A VALID NOTICE 3-2013 Washer, Spring Tension, Curved, Spring Steel

Professional Standard - Textile, steel3-point bending

FZ/T 90076-1995 Bending radius of pipes, plates, and round bars
FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

Professional Standard - Machinery, steel3-point bending

JB/T 7716-1995 Four-point bending fatigue test method for welded joints
JB/T 12076-2014 Building construction machinery and equipment.Rebar bending machines

The American Road & Transportation Builders Association, steel3-point bending

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

AASHTO - American Association of State Highway and Transportation Officials, steel3-point bending

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
LRFD BOX GIRDER-2005 AASHTO-LRFD DESIGN EXAMPLE HORIZONTALLY CURVED STEEL BOX GIRDER BRIDGE - FINAL REPORT
LRFD I-GIRDER-2005 AASHTO-LRFD DESIGN EXAMPLE HORIZONTALLY CURVED STEEL I-GIRDER BRIDGE - FINAL REPORT

Professional Standard - Railway, steel3-point bending

TB/T 1354-1979 Rail bending fatigue test method
TB/T 2485-1994 High manganese steel frog bending fatigue test method
TB/T 2706.3-1996 Three-side roof plate of cold-formed steel series for railway passenger cars

Professional Standard-Ships, steel3-point bending

CB/T 3522-1993 Test method for transverse bending of marine steel pipes
CB/T 3522-2016 Test method for transverse bending of marine steel pipes
CB/Z 181-1998 Specification for bending and heat.treatment of 921A bulb flats by means of MF induction

Aerospace, Security and Defence Industries Association of Europe (ASD), steel3-point bending

ASD-STAN PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)
ASD-STAN PREN 2949-1986 Aerospace Series Washer, Bent Tab Heat Resisting Steel (Issue P 1)

Japanese Industrial Standards Committee (JISC), steel3-point bending

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS Z 2288:2003 Methods of tensile shear test and bend test for thin clad steel sheets

IN-BIS, steel3-point bending

CZ-CSN, steel3-point bending

CSN 42 0046-1973 Cold rolled, drawn, or bent steel products. Terminology
CSN 42 6881-1977 Steel bent sheet sections with trapeoid-shaped corrugation. Dimensions
CSN 42 6882-1977 Steel bent sheet sections with trapezoid-shaped cormgation. Dimensions
CSN 42 6880-1977 Steel bent sheet sections with trapezoid-shaped eorrugation. Dimensions
CSN 42 0405-1978 Reverse bend test for sheets and strips of thickness to 3 mm
CSN ISO 7884-4:1994 Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending

Professional Standard - Aquaculture, steel3-point bending

SC/T 8062-2000 Test method for overall longitudinal bending of glass fiber reinforced plastics fishing vessel

工业和信息化部, steel3-point bending

YB/T 4731-2019 Repeated bending test method for electrical steel strips (sheets)

Professional Standard - Agriculture, steel3-point bending

GB 2760-2014增补公告2019年第2号 Announcement on 24 kinds of "three new foods" including Lactobacillus benthus

Professional Standard - Aviation, steel3-point bending

HB 4-55-1983 Minimum bend radii for steel and aluminum alloy conduit
HB 4-55-1976 Minimum bend radii for steel and aluminum alloy conduit

KE-KEBS, steel3-point bending

KS 02-106-1983 KENYA STANDARD SPECIFICATION FOR BENDING DIMENSIONS AND SCHEDULING OF BARS FOR REINFORCEMENT OF CONCRETE

Professional Standard - Aerospace, steel3-point bending

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

Association of German Mechanical Engineers, steel3-point bending

DVS 3101-2-1999

YU-JUS, steel3-point bending

JUS C.T3.054-1984 Fusion welded buttjoints in steel — Transversa sida bend test
JUS U.E7.101/1-1989 Stability of steel constructions. Lateral buckling ofgirders. Amendments

SAE - SAE International, steel3-point bending

SAE J524-1991 Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
SAE J524-2016 Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
SAE J524-1980 Seamless Low Carbon Steel Tubing Annealed for Bending and Flaring
SAE J2613-2017 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE J525-1991 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for bending and Flaring
SAE J525-1996 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for bending and Flaring
SAE J525-1958 Welded and Cold Drawn Low Carbon Steel Tubing Annealed for Bending and Flaring
SAE J525-2016 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring
SAE J525-1980 Welded and Cold Drawn Low Carbon Steel Tubing Annealed for Bending and Flaring
SAE J2467-2020 Welded and Cold-Drawn@ SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring

International Electrotechnical Commission (IEC), steel3-point bending

IEC TR 63114:2018 Electrical steel - Reverse bend test method of electrical steel strip and sheet

IT-UNI, steel3-point bending

UNI 5788-1966
UNI 5294-1978 Mechanical tests of ferrous material. Reverse bend test for steel wires.

TR-TSE, steel3-point bending

TS 3284-1979 Flexnral Strength Of Concrete (Using Simple Beam With Third-Point Loading)
TS 282-1965 TESTING OF STEEL - NOTCHED BEND TEST ON FUSION VVELDED BUTT JOINTS

Taiwan Provincial Standard of the People's Republic of China, steel3-point bending

CNS 1233-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading)

Aerospace Industries Association/ANSI Aerospace Standards, steel3-point bending

AIA/NAS NASM21250-1999 Bolt, Tension, Steel, External Wrenching, Flanged, 12 - Point, 180 KSI Ftu, 450 Degrees F FSC5306
AIA/NAS NASM21133-1999 Nut, Self-Locking, Steel, 180 KSI Ftu, 450 Degrees F, Flanged, MS33787 Wrenching Element

U.S. Air Force, steel3-point bending

AIR FORCE MIL-B-4548 A-1956 BENDING MACHINES, PIPE AND CONDUIT, AIRCRAFT, HYDRAULIC TYPE, FLOOR MOUNTED

WRC - Welding Research Council, steel3-point bending

BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T
BULLETIN 180-1973 ELASTIC-PLASTIC BENDING OF A CONSTRAINED CIRCULAR PERFORATED PLATE UNDER UNIFORM PRESSURE (TRIANGULAR PENETRATION PATTERN)

CH-SNV, steel3-point bending

VSM 18670.11-1964

(U.S.) Telecommunications Industries Association , steel3-point bending

TIA TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

TIA - Telecommunications Industry Association, steel3-point bending

TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

ECIA - Electronic Components Industry Association, steel3-point bending

EIA-364-92-1997 TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
364-92-1997 TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

GOSTR, steel3-point bending

GOST R 58389-2019 Bent steel sheet profiles with trapezoidal corrugations for reinforced concrete structures. Specifications
GOST 7268-1982 Steel. Method for determination of ability to mechanical ageing by impact bend testing

American Welding Society (AWS), steel3-point bending

WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)