ZH
RU
ES

Solid content test method

Solid content test method, Total:498 items.

In the international standard classification, Solid content test method involves: Insulating materials, Paints and varnishes, Telecommunication systems, Iron and steel products, Inorganic chemicals, Plastics, Milk and milk products, Organic chemicals, Software development and system documentation, Structures of buildings, Optoelectronics. Laser equipment, Construction materials, Waxes, bituminous materials and other petroleum products, Products of the chemical industry, Applications of information technology, Measurement of volume, mass, density, viscosity, Analytical chemistry, Road vehicle systems, Beverages, Wastes, Protection against fire, Crude petroleum, Fruits. Vegetables, Farm buildings, structures and installations, Domestic, commercial and industrial heating appliances, Insulating fluids, Galvanic cells and batteries, Refractories, Mechanical testing, Wind turbine systems and other alternative sources of energy, Fuels, Petroleum products in general, Electromechanical components for electronic and telecommunications equipment, Environmental testing, Thermodynamics and temperature measurements, Soil quality. Pedology, Acoustics and acoustic measurements, Natural gas, Protection against dangerous goods, Particle size analysis. Sieving, Components and accessories for telecommunications equipment, Coals, Road engineering, Products of the textile industry, Earthworks. Excavations. Foundation construction. Underground works, Veterinary medicine, Farming and forestry, Non-ferrous metals, Rubber, Corrosion of metals, Fasteners, Fuel cells, Water quality, Air quality, Test conditions and procedures in general, Ceramics, Paint ingredients, Alarm and warning systems, Clothes, Data storage devices, Non-destructive testing, Cereals, pulses and derived products, Tea. Coffee. Cocoa, Sugar. Sugar products. Starch, Chocolate.

Group Standards of the People's Republic of China, Solid content test method

T/QGCML 817-2023 Test method for high solid epoxy insulating varnish
T/QGCML 833-2023 Test method for high solids polyimide paint

Professional Standard - Post and Telecommunication, Solid content test method

YD/T 4413-2023

Association Francaise de Normalisation, Solid content test method

NF L10-213*NF EN 3030:1994 Aerospace series. Test method for dry film lubricants. Solids content.
NF R15-602-3:1991 Road vehicles. Cooling fluids. Test methods. Part 3 : measurement of ash conctent.
NF V05-109:1970 Agricultural products. Fruit and vegetable products. Determination of soluble solids content (refractometric method).
NF EN 3030:1994 Série aérospatiale - Méthode d'essai pour films lubrifiants solides - Teneur en extrait sec
NF X34-112:2011 Solid biofuels - Determination of particle density.
NF U47-016:2010 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test.
NF EN 3032:1994 Série aérospatiale - Méthode d'essai pour films lubrifiants solides - Mesurage de l'épaisseur
NF U47-017:2010 Animal health analysis methods - Detection of antibodies against equine Rhinopneumonia by the Complement Fixation Test
NF P21-384*NF EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners
NF EN 16630:2015 Modules fixes d'entraînement physique de plein air - Exigences de sécurité et méthodes d'essai
NF U47-016:2002 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test.

Professional Standard - Aerospace, Solid content test method

QJ 2289-1992 Solid state relay test method
QJ 914.4-1985 Composite solid propellant (butylene carboxyl system) - Analysis method for moisture content
QJ 2443-1993 Solid strategic missile proficiency test method
QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
QJ 1359-1988 Composite solid propellant detonation heat test method isothermal method
QJ 2610-1994 Test method for solid rocket motor nozzle swing angle
QJ 970-1986 Rigid solid average linear expansion coefficient test method
QJ 1522-1988 Test method for low temperature linear thermal expansion coefficient of rigid solid
QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°
QJ 3236-2005 Measurement Method of Negative Thrust in Static Test of Solid Rocket Motor
QJ 1135A-2002 Vibration test method for solid rocket motors
QJ 1136A-2002 Shock test method for solid rocket motors
QJ 2902-1997 Solid rocket motor temperature test method
QJ 3006-1998 Solid surface (ship) to air missile semi-bomb test method
QJ 2613-1994 Solid rocket motor rotation test method
QJ 1137A-2005 Centrifugal test method for solid rocket motor
QJ 3312-2008 Thrust Vector Measurement Method for Static Test of Solid Rocket Motor
QJ 1360-1988 Method for Determination of Hardness of Composite Solid Propellants
QJ 1360-1988修改单1-1996 Method for Determination of Hardness of Composite Solid Propellants
QJ 1658A-1996 Test method for airtightness of solid rocket motors
QJ 3228-2005 Test method for Poisson's ratio of composite solid propellants
QJ 809-1983 Method for determination of thermal conductivity of solid propellants and solid motor insulation
QJ 2038.1-1991 Test method for bonding strength of solid rocket motor combustor interface Pull-off method
QJ 2038.2-1991 Solid Rocket Motor Combustion Chamber Interface Bonding Strength Test Method Shear Method
QJ 1367-1988 Bending test method for solid rocket motor combustor casing
QJ 1368-1988 External pressure test method for solid rocket motor combustor casing
QJ 1412-1988 Axial compression test method for solid rocket motor combustor casing
QJ 1392A-2005 Test method for internal pressure of solid rocket motor combustor casing
QJ 1392-1988 Test method for internal pressure of solid rocket motor combustor casing

Indonesia Standards, Solid content test method

SNI 07-4616-1998 Chemical test method for cast iron
SNI 06-0480-1989 Solid plastic materials, Test method for density
SNI 06-3268-1994 Solid and liquid paraffin wax, Specification and test method
SNI ISO/IEC 10373-1:2013
SNI 03-0348-1989 Solid concrete bricks, Specification and test method
SNI 06-2413-2002 Test methods for solid matter content in water

American Society for Testing and Materials (ASTM), Solid content test method

ASTM C561-91(2000) Standard Test Method for Ash in a Graphite Sample
ASTM D5310-10(2014) Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography
ASTM C1603-23 Standard Test Method for Measurement of Solids in Water
ASTM C1603-16 Standard Test Method for Measurement of Solids in Water
ASTM D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
ASTM C1603-10 Standard Test Method for Measurement of Solids in Water
ASTM D4359-90(2006) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D7579-09 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D757-77 Standard test method for determination of pyrolysis solids content in pyrolysis liquids by methanol solids filtration method
ASTM E1109-86(2004) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-86(1996) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D4359-90(2000)e1 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D4359-90(2019) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM E1064-16 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D4006-16 Standard Test Method for Water in Crude Oil by Distillation
ASTM D5232-92(1997) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D4359-90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
ASTM D5232-13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM C914-09(2022) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM G134-95(2006) Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM E830-87(1996) Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel
ASTM E830-87(2004) Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel
ASTM D482-07 Standard Test Method for Ash from Petroleum Products
ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D5744-07e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D2766-95(2005) Standard Test Method for Specific Heat of Liquids and Solids
ASTM D2766-95(2000) Standard Test Method for Specific Heat of Liquids and Solids
ASTM D2766-95(2009) Standard Test Method for Specific Heat of Liquids and Solids
ASTM D2766-95 Standard Test Method for Specific Heat of Liquids and Solids
ASTM D4842-90(1996) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM D4842-90(2001) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM G134-95(2001)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM G134-95(2010)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D6980-12 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM E289-99 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM E289-04 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D2780-92(2007) Standard Test Method for Solubility of Fixed Gases in Liquids
ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D3289-17(2022) Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
ASTM D2799-99 Standard Test Method for Microscopical Determination of Volume Percent of Physical Components of Coal
ASTM D2799-09 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D6393-99(2006) Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393-99 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393/D6393M-21 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM D2508-93 Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM E3277-21 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM E3277-22 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D1389-06 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D6773-22 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
ASTM D1389-07 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D70-18 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM E289-04(2010) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM C1892/C1892M-22 Standard Test Methods for Strength of Anchors in Masonry
ASTM D5530-94(1998) Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM D5530-94(2003) Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM D5530-94(2009) Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM D5530-22 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM D4804-03 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-98 Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-09 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-14 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM G72-01 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G72-82(1996)e1 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM D7579-09(2013) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM D6627-01(2006) Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM D6627-01 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM D6627/D6627M-11 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D2780-92(2002)e1 Standard Test Method for Solubility of Fixed Gases in Liquids
ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM G125-00 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2015) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2023) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM D5232-92(2003) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM D374/D374M-16 Standard Test Methods for Thickness of Solid Electrical Insulation
ASTM D374/D374M-23 Standard Test Methods for Thickness of Solid Electrical Insulation
ASTM D4804-19 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D5231-92(1998) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D4804-19a Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D3926-05(2019) Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM D4804-20 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D5744-96(2001) Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D5550-94 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D5550-00 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D2780-92(1997) Standard Test Method for Solubility of Fixed Gases in Liquids
ASTM D3429-93(2002)e1 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3429-93(2007) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3429-93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3523-92(2012) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
ASTM D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D7506/D7506M-09 Standard Test Method for Pocket Reinforcement
ASTM D3523-92(2002) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
ASTM D3523-92(2007) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

American National Standards Institute （ANSI), Solid content test method

ANSI/ASTM C561:2000 Test Method for Ash in a Graphite Sample
ANSI/ASTM D369:1996 Test Method for Specific Gravity of Creosote Fractions and Residues
ANSI/ASTM D4804:1998 Test Method for Determining the Flammability Characteristics of Non-Rigid Solid Plastics (08.03)
ANSI/EIA 448-24:1993 Test Method 24 Solid State Switch Transfer Tests
ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens

British Standards Institution (BSI), Solid content test method

BS EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Determination of non-fat solids content (Reference method)
BS EN ISO 3727-1:2002 Butter - Determination of moisture, non-fat solids and fat contents - Determination of moisture content (Reference method)
DD CEN/TS 15883:2009 Residential solid fuel burning appliances. Emission test methods
BS ISO/IEC 10373-6:2020+A1:2021 Cards and security devices for personal identification. Test methods - Contactless proximity objects
BS ISO/IEC 10373-7:2019 Cards and security devices for personal identification. Test methods - Contactless vicinity objects
BS ISO/IEC 18328-4:2018 Identification cards. ICC-managed devices - Test methods for logical characteristics
BS DD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
BS DD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
BS ISO 24070-1:2021 Building and civil engineering sealants. Determination of cured thickness of one-component sealant - Taper-shaped groove test method
DD CEN/TS 15400:2006 Solid recovered fuels — Methods for the determination of calorific value
DD CEN/TS 15403:2006 Solid recovered fuels — Methods for the determination of ash content
BS EN 1860-1:2013+A1:2017 Appliances, solid fuels and firelighters for barbecueing - Barbecues burning solid fuels. Requirements and test methods
BS 3482-10:1991 Methods of test for desiccants - Determination of bulk density (dry basis)
12/30264502 DC BS ISO/IEC 10373-6 AMD6. Identification cards. Test methods. Part 6. Proximity cards
14/30299961 DC BS ISO/IEC 10373-6 AMD8. Identification cards. Test methods. Part 6. Proximity cards
16/30328639 DC BS ISO/IEC 10373-6 AMD4. Identification cards. Test methods. Part 6. Proximity cards
BS ISO/IEC 18013-4:2019 Personal identification. ISO-compliant driving licence. Test methods
18/30360843 DC BS ISO/IEC 10373-6 AMD1. Identification cards. Test methods. Part 6. Proximity cards
16/30335632 DC BS ISO/IEC 10373-6 AMD5. Identification cards. Test methods. Part 6. Proximity cards
13/30250403 DC BS ISO/IEC 10373-6 AMD5. Identification cards. Test methods. Part 6. Proximity cards
BS DD CEN/TS 15412:2006 Solid recovered fuels - Methods for the determination of metallic aluminium
BS DD CEN/TS 15400:2006 Solid recovered fuels - Methods for the determination of calorific value
BS DD CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium
BS EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD). General requirements and test methods
BS EN 196-3:2005+A1:2008 Methods of testing cement - Determination of setting times and soundness
BS DD CEN/TS 15103:2005 Solid biofuels — Methods for the determination of bulk density
BS DD CEN/TS 15103:2006 Solid biofuels - Methods for the determination of bulk density
DD CEN/TS 15412:2006 Solid recovered fuels — Methods for the determination of metallic aluminium

CU-NC, Solid content test method

NC 26-140-1985 Drugs. Determination of Water by Karl Fisoher Method Testing Method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Solid content test method

GB/T 33138-2016 Levels and test method for storage and backup system
GB/T 33797-2017 Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas

ANSI - American National Standards Institute, Solid content test method

INCITS/ISO/IEC 10373-1:1998 Identification cards - Test methods - Part 1: General characteristics tests
INCITS/ISO/IEC 10373-7:2001 Identification cards - Test methods - Part 7: Vicinity cards (Adopted by INCITS)
INCITS/ISO/IEC 10373-6:2001 Identification cards - Test methods - Part 6: Proximity cards (Adopted by INCITS)
INCITS/ISO/IEC 10373-6 AMD 2:2003 Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 2: Improved RF test methods (Adopted by INCITS)

PH-BPS, Solid content test method

PNS ASTM C1603:2021 Standard Test Method for Measurement of Solids in Water

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid content test method

GB/T 15175-1994 Measurement methods for main parameter of solid-state lasers
GB/T 5597-1999 Test method for complex permittivity of solid dielectric materials at microwave frequencies
GB/T 10064-2006 Methods of test for the determination of the insulation resistance of solid insulating materials
GB/T 21617-2008 Dangerous goods.Test method for oxidizing solids
GB 7265.1-87 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB 7265.1-1987 Test Method for Microwave Complex Permittivity of Solid Dielectric Perturbation Method
GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
GB 7265.2-1987 Test method of microwave complex permittivity of solid dielectric "open cavity" method
GB/T 17473.1-2008 Test method of precious metals pastes used for microelectronics.Determination of solids content
GB/T 21611-2008 Dangerous goods.Test method of spontaneous combustion for flammable solids
GB/T 21612-2008 Dangerous goods.Test method of self heating for flammable solids
GB/T 2295-2008 Determination of the ash content of coking solid products
GB/T 28732-2012 Determination of total sulfur in solid biofuels
GB/T 15175-2012 Measurement methods for main parameter of solid state lasers
GB/T 17473.1-1998 Test methods of precious metal pastes used for thick film microelectronics--Determination of solids content
GB/T 30725-2014 Determination of ash composition in solid biofuels
GB/T 30729-2014 Determination of chlorine in solid biofuels
GB/T 2294-1997 Solid products of coal carbonization--Determination of softening point
GB/T 28734-2012 Determination of carbon and hydrogen in solid biofuels

Military Standard of the People's Republic of China-General Armament Department, Solid content test method

GJB 332A-2004 Test method for linear expansion coefficient of solid materials
GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K
GJB 2365-1995 Solid rocket motor stationary test test method
GJB 772.304-1991 Test methods for explosives - Electrical method for determination of detonation velocity of solid explosives
GJB 1059.1-1990 Phenolic resin test method for ablative materials Solid content test
GJB 2365A-2004 Test method for static test parameters of solid rocket motor
GJB 2365B-2021 Test method for static test parameters of solid rocket motor
GJB 332-1987 Test method for average linear expansion coefficient of rigid solids
GJB 9923-2021 Solid launch vehicle test launch cycle assessment method
GJB 330-1987 Test method for average specific heat capacity of solid materials from room temperature to 800°C
GJB 1059.1A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 1: Solids Content Test
GJB 10238-2021 Solid rocket motor bake-off test method
GJB 5021-2001 Solid rocket motor temperature test method
GJB 9757-2020 Solid rocket motor gunnery test method
GJB 10022-2021 Constant strain test method for composite solid propellants
GJB 604.2-1988 Test methods for explosives used in nuclear weapons - Determination of linear expansion coefficient of solid explosives
GJB 10018-2021 Composite solid propellant fixed load test and equilibrium modulus determination method
GJB 1802-1993 Test method for average linear expansion coefficient of low expansion rigid solid materials
GJB 1264.5-1994 Test methods for aviation turbine engine lubricating oils - Determination of solid particulate impurities
GJB 772.109-1990 Explosives Test Methods Freezing Point Determination
GJB 5026-2003 Fixed station ground and sea clutter test methods

未注明发布机构, Solid content test method

GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
BS 1881-112:1983(1998) Testing concrete — Part 112 : Methods of accelerated curing of test cubes
BS EN 3030:1994(1999) Test method for dry film lubricants — Solids content

Japanese Industrial Standards Committee (JISC), Solid content test method

JIS K 0226:1983 Analytical method for trace water in diluent gas and zero gas
JIS Z 8807:1976 Measuring methods for specific gravity of solid
JIS K 2536 ERRATUM 1:2000 Liquid petroleum products -- Testing method of components (Erratum 1)
JIS Z 2353:2021 Method for measurement of ultrasonic velocity in solids
JIS Z 8807:2012 Methods of measuring density and specific gravity of solid
JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)
JIS C 8841-3:2011 Small solid oxide fuel cell power systems -- Part 3: Performance testing methods and environment testing methods
JIS R 1761:2016 Testing method for gas permeability of porous ceramics using solid oxide fuel cell
JIS Z 2354:2012 Method for measurement of ultrasonic attenuation coefficient of solids

German Institute for Standardization, Solid content test method

DIN 51700:2015-12 Testing of solid fuels - Generalities and index of methods of test
DIN CEN/TS 15883:2010-02*DIN SPEC 1101:2010-02 Residential solid fuel burning appliances - Emission test methods; German version CEN/TS 15883:2009
DIN EN 3030:1994-04 Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994
DIN 51700:2010 Testing of solid fuels - Generalities and index of methods of test
DIN 51700:2015 Testing of solid fuels - Generalities and index of methods of test
DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 15250:2007-06 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 / Note: DIN 18840 (2005-08) remains valid alongside this standard until 2007-09-01.*To be replaced by DIN EN 15250 (2012-10).
DIN EN 15250 Berichtigung 1:2015-05 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007, Corrigendum to DIN EN 15250:2007-06

Danish Standards Foundation, Solid content test method

DS/ISO/IEC 10373-6:2011 Identification cards - Test methods - Part 6: Proximity cards
DS/ISO/IEC 10373-7:2008 Identification cards - Test methods - Part 7: Vicinity cards
DS/ISO/IEC 10373-6/Cor 1:2013 Identification cards - Test methods - Part 6: Proximity cards
DS/ISO/IEC 10373-1:2007 Identification cards - Test methods - Part 1: General characteristics
DS/ISO/IEC 10373-1/A1:2013 Identification cards - Test methods - Part 1: General characteristics
DS/ISO/IEC 10373-6/Amd 2:2013 Identification cards - Test methods - Part 6: Proximity cards - AMENDMENT 2: Test methods for electromagnetic disturbance
DS/CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
DS/CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium

Canadian Standards Association (CSA), Solid content test method

CAN/CSA-ISO/IEC 10373-7:2009 Identification cards - Test methods - Part 7: Vicinity cards
CAN/CSA-ISO/IEC 10373-1:2007 Identification cards - Test methods - Part 1: General characteristics
CAN/CSA-C156.3-M86-1986 Méthodes d'essai des supports isolants (Première édition; Fiche No 1: avril 1988)

Korean Agency for Technology and Standards (KATS), Solid content test method

KS M 0602-2010(2020) Measuring methods for specific gravity of solid
KS M 2115-2017 Testing method for water and sediment in distillate fuel by centrifuge
KS X ISO/IEC 10373-5:2018 Identification cards — Test methods — Part 5: Optical memory cards
KS X ISO/IEC 10373-5-2023 ID Card Test Method Part 5: Optical Memory Card
KS C 2105-2003(2018)
KS C 2004-1998 TEST METHOD FOR THE PROOF TRACKING INDICES OF SOLID ELECTRICAL INSULATING MATERIALS
KS X ISO/IEC 10373-2:2018 Identification cards — Test methods — Part 2: Cards with magnetic stripes
KS C IEC 60167:2002 Methods of test for the determination of the insulation resistance of solid insulating materials
KS C IEC 60167:2017 Methods of test for the determination of the insulation resistance of solid insulating materials
KS B 0533-2005 Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces
KS D 0268-2015(2020) Test method for solid particle impingement erosion
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS C 2127-1996(2016) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS M 3015-2003(2018)
KS D 0268-2005 Test method for solid particle impingement erosion
KS D 0268-2015 Test method for solid particle impingement erosion
KS C 2131-1996(2016) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS B 0143-1991 Method of tightening test for threaded fasteners
KS F 2427-2010 Standard test method for determining the consistency of fresh concrete by Vebe test
KS F 2427-1985 Standard test method for determining the consistency of fresh concrete by Vebe test
KS C 2105-2003 Testing methods for electric strengthof solid insulating materials
KS C 2127-1996(2021) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS B ISO 8573-4-2003(2008) Compressed air－Test methods for solid particle content
KS C 2105-1982 Testing methods for electric strengthof solid insulating materials
KS B 0533-1995 Methods for measurement on ultrasonic velocity of solid by pulse technique using reference test pieces

Professional Standard - Energy, Solid content test method

NB/T 51019-2014 Method of compaction testing of solid backfilling materials
NB/T10820-2021
NB/T10821-2021
NB/T 34025-2015 Test method for solid biofuel of clinkering property

RO-ASRO, Solid content test method

STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength
STAS E 12267-1984 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for the delt rminalion of the flammability in Llic case of exposure In an igniting source
STAS 12065-1982 Solid electrical insulating materials CONBINED FLEXIBLE MATERIALS Methods of test
STAS SR 5267-1995 Solid mineral fuels. Humic acids determination. Voiumetrical method
STAS 10289-1982 Solid electroinsulating materials THERMOSETTING LAMINATED MATERIALS Test methods

CZ-CSN, Solid content test method

CSN 57 0106 Cast.3-1984 Methods for testing oí frozen milk products. Determination of total solids content.
CSN 56 0240 Cast.3-1977 Testing methods for non-alcoholic drinks. Determination of solids by means of refractometer
CSN 44 1377 Z1-1995
CSN IEC 167:1993 Methods of test for the determination of the insultation resistance of solid insultating materials
CSN 01 5185-1972 Determination of specífic suríace areas of solids. Sorption methods
CSN 57 0104 Cast.3-1984 Methods for testing of milk and liquid milk products. Determination of dry matter
CSN 57 0105 Cast.3-1978 Methods for testing of ilk and liquid mllk roducts. Determination f total solids content.
CSN 34 6460-1983 Methods of test for the determination of the d. c. insulation resistance of solid insulating materials
CSN 34 6468-1990 Test methods of solid insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

The American Road & Transportation Builders Association, Solid content test method

AASHTO T 110-2003 Standard Method of Test for Moisture or Volatile Distillates in Hot-Mix Asphalt (HMA)

ES-UNE, Solid content test method

UNE-CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices - Guide to flash point testing (Endorsed by Asociación Española de Normalización in July of 2019.)

KR-KS, Solid content test method

KS X ISO/IEC 10373-5-2018 Identification cards — Test methods — Part 5: Optical memory cards
KS X ISO/IEC 10373-2-2018 Identification cards — Test methods — Part 2: Cards with magnetic stripes
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS B 5361-2008(2023) Emissivity measuring methods for industrial solid materials

AIA/NAS - Aerospace Industries Association of America Inc., Solid content test method

NASM1312-1997 Fastener Test Methods
NASM1312-19-1997 Fastener Test Methods; Method 19 Fastener Sealing
NASM1312-32-1998 Fastener Test Method; Method 32@ Barrel Nut Test
NASM1312-7-1997 Fasteners Test Methods; Method 7 Vibration
NASM1312-20-1997 Fastener Test Methods; Method 20 Single Shear
NASM1312-31-1997 Fastener Test Methods; Method 31@ Torque
NASM1312-3-1997 Fastener Test Methods; Method 3 Humidity
NASM1312-2-1997 Fastener Test Methods; Method 2 Interaction
NASM1312-1-1997 Fastener Test Methods; Method 1 Salt Spray
NASM1312-6-1997 Fastener Test Methods; Method 6 Hardness
NASM1312-27-1997 Fastener Test Methods; Method 27@ Panel Fastener Sheet Pull-Up
NASM1312-30-1997 Fastener Test Methods; Method 30@ Sheet Pull-Up of Blind Fasteners
NASM1312-13-1997 Fastener Test Methods; Method 13 Double Shear Test
NASM1312-13-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
NASM1312-22-1997 Fastener Test Methods; Method 22 Receptacle Push-Out@ Panel Fasteners
NASM1312-19-2012 FASTENER TEST METHODS METHOD 19 FASTENER SEALING (Rev 1)
NASM1312-4-1997 Fastener Test Methods; Method 4 Lap Joint Shear
NASM1312-11-1997 Fastener Test Methods; Method 11 Tension Fatigue
NASM1312-8-1997 Fastener Test Methods; Method 8 Tensile Strength
NASM1312-15-1997 Fastener Test Methods; Method 15 Torque - Tension
NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture
NASM1312-17-1997 Fastener Test Methods; Method 17 Stress Relaxation
NAM1312-107-1997 Fastener Test Methods@ Metric; Method 107 Vibration
NASM1312-9-1997 Fastener Test Methods; Method 9 Stress Corrosion
NAM1312-113-1997 Fastener Test Methods@ Metric; Method 113 Double Shear Test
NASM1312-32-2012 FASTENER TEST METHOD METHOD 32 BARREL NUT TEST (Rev 1)
NASM1312-23-1997 Fastener Test Methods; Method 23 Tensile Strength of Panel Fasteners
NASM1312-28-1997 Fastener Test Methods; Method 28@ Elevated Temperature Double Shear
NASM1312-5-1997 Fastener Test Methods; Method 5 Stress Durability
NAM1312-113-2012 FASTENER TEST METHODS@ METRIC METHOD 113 DOUBLE SHEAR TEST (Rev 1)
NASM1312-27-2012 FASTENER TEST METHODS METHOD 27 PANEL FASTENER SHEET PULL-UP (Rev 1)
NASM1312-14-1997 Fastener Test Methods; Method 14 Stress Durability Internally Threaded Fasteners
NASM1312-16-1997 Fastener Test Methods; Method 16 Clamping Force for Installation Formed Fasteners
NASM1312-24-1997 Fastener Test Methods; Method 24 Receptacle Torque-Out@ Panel Fasteners
NASM1312-26-1997 Fastener Test Methods; Method 26 Structural Panel Fastener Lap Joint Shear
NASM1312-30-2012 FASTENER TEST METHODS METHOD 30 SHEET PULL-UP OF BLIND FASTENERS (Rev 1)
NASM1312-2012 FASTENER TEST METHODS (Rev 1)

AENOR, Solid content test method

UNE-CEN/TS 15883:2010 Residential solid fuel burning appliances - Emission test methods
UNE 21306:1976 METHODS OF TEST FOR THE DETERMINATION OF THE INSULATION RESISTANCE OF OLID INSULATING MATERIALS.
UNE-EN 3030:1996 AEROSPACE SERIES. TEST METHOD FOR DRY FILM LUBRICANTS. SOLIDS CONTENT.
UNE-EN 12815:2002 Residential cookers fired by solid fuel. Requirements and test methods.
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.

API - American Petroleum Institute, Solid content test method

API TR 10TR5 KAZAKH-2008 Methods for Testing of Solid and Rigid Centralizers (First Edition**)

国家能源局, Solid content test method

NB/T 10820-2021 Solid oxide fuel cell single cell test method
NB/T 10821-2021 Solid oxide fuel cell stack test method

European Committee for Electrotechnical Standardization（CENELEC）, Solid content test method

HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials
EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD) - General requirements and test methods

Aerospace Industries Association/ANSI Aerospace Standards, Solid content test method

AIA/NAS NASM1312-32-2012 FASTENER TEST METHOD METHOD 32 BARREL NUT TEST
AIA/NAS NASM1312-30-2012 FASTENER TEST METHODS METHOD 30 SHEET PULL-UP OF BLIND FASTENERS
AIA/NAS NASM1312-13-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
AIA/NAS NASM1312-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
AIA/NAS NASM1312-9-1997 Fastener Test Methods; Method 9 Stress Corrosion
AIA/NAS NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture
AIA/NAS NASM1312-28-2012 FASTENER TEST METHODS METHOD 28 ELEVATED TEMPERATURE DOUBLE SHEAR
AIA/NAS NASM1312-32-1998 Fastener Test Method; Method 32, Barrel Nut Test
AIA/NAS NAM1312-113-2012 FASTENER TEST METHODS, METRIC METHOD 113 DOUBLE SHEAR TEST (Rev 1)
AIA/NAS NASM1312-19-1997 Fastener Test Methods; Method 19 Fastener Sealing
AIA/NAS NASM1312-27-2012 FASTENER TEST METHODS METHOD 27 PANEL FASTENER SHEET PULL-UP (Rev 1)
AIA/NAS NASM1312-2012 FASTENER TEST METHODS (Rev 1)

IN-BIS, Solid content test method

IS 3396-1979
IS 12402 Pt.2-1988
IS 10083-1982
IS 2720 Pt.21-1977
IS 11622-1986
IS 101 Pt.8/Sec.6-1993 Methods of sampling and test for paints, varnishes and related products. Part 8: Tests for pigments and other solids. Section 6: Volume solids
IS 9316 Pt.4-1988
IS 9405-1980

Professional Standard - Military and Civilian Products, Solid content test method

WJ 2396-1997 Test method for maximum range extinction ratio of solid-state pulsed laser range finder

International Electrotechnical Commission (IEC), Solid content test method

IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials

NO-SN, Solid content test method

NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles

PL-PKN, Solid content test method

PN E04404-1986 Solid insulation materials Methods of test for electric strength at power frequencies
PN G04525-1990 Solid fuels Method for the determination of carbon and hydrogen

Standard Association of Australia （SAA）, Solid content test method

AS 1580.301.2:1990(R2013)
AS 1683.2:2001 Methods of test for elastomers - Latex, rubber - Determination of total solids content
AS 1012.14:2018 Methods of testing concrete, Method 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume

SE-SIS, Solid content test method

SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
SIS SS 404 09 24-1992 Solid insulating materials - Methods of test for electric strength of solid insulating materials

Aerospace Industries Association, Solid content test method

AIA NASM1312-19-1997 Fastener Test Methods; Method 19 Fastener Sealing FSC 53GP
AIA NASM1312-32-1998 Fastener Test Method; Method 32, Barrel Nut Test FSC 53GP
AIA NASM1312-1997 Fastener Test Methods FSC 53GP
AIA NASM1312-7-1997 Fasteners Test Methods; Method 7 Vibration 53GP
AIA NAM1312-113-1997 Fastener Test Methods, Metric; Method 113 Double Shear Test FSC 53GP
AIA NASM1312-27-1997 Fastener Test Methods; Method 27, Panel Fastener Sheet Pull-Up FSC 53GP
AIA NASM1312-20-1997 Fastener Test Methods; Method 20 Single Shear FSC 53GP
AIA NASM1312-31-1997 Fastener Test Methods; Method 31, Torque FSC 53GP
AIA NASM1312-1-1997 Fastener Test Methods; Method 1 Salt Spray FSC 53GP
AIA NASM1312-2-1997 Fastener Test Methods; Method 2 Interaction FSC 53GP
AIA NASM1312-3-1997 Fastener Test Methods; Method 3 Humidity FSC 53GP
AIA NASM1312-6-1997 Fastener Test Methods; Method 6 Hardness FSC 53GP
AIA NASM1312-9-1997 Fastener Test Methods; Method 9 Stress Corrosion
AIA NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture
AIA NASM1312-30-1997 Fastener Test Methods; Method 30, Sheet Pull-Up of Blind Fasteners 53GP
AIA NASM1312-15-1997 Fastener Test Methods; Method 15 Torque - Tension 53GP
AIA NASM1312-22-1997 Fastener Test Methods; Method 22 Receptacle Push-Out, Panel Fasteners FSC 53GP

Professional Standard - Electron, Solid content test method

SJ/T 10143-1991 Detail specification for electronic components--Semiconductor integrated circuits--CT54LS112/CT74LS112 dual J-K negative-edge flip-flop
SJ/T 11790-2021 Solid State Disk Energy Consumption Test Method

RU-GOST R, Solid content test method

GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample
GOST R ISO 8573-4-2005 Compressed air. Part 4. Test methods for solid particle content
GOST R 54225-2010 Solid recovered fuels. Determination of bulk density
GOST R 54225-2010(2019) Solid recovered fuels. Determination of bulk density
GOST 18164-1972 Drinking water. Method for determination of total solids content
GOST 5900-2014 Sonfectionery. Methods for determination of moisture and solids
GOST 33977-2016 Fruit and vegetable products. Methods for determination of total solids content
GOST R 52911-2008 Solid mineral fuels. Methods for determination of total moisture
GOST R 55120-2012 Solid recovered fuels. Methods for the determination of metallic aluminium

Lithuanian Standards Office , Solid content test method

LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
LST HD 568 S1-2002 Methods of test for the determination of the insulation resistance of solid insulating materials (IEC 60167:1964)

YU-JUS, Solid content test method

JUS N.R2.503-1983 Aluminium electrolytic capacitors with solid and non-solid electrolyte. Selection of methods of test and general reguiremen ts
JUS M.A5.013-1991 Cone. Methods for testing of internat and external cones
JUS N.R2.601-1980 Fixed tantahim capacitors with liquid or solid electrolyte. Sekction of methods of test and general reguirements

Electronic Components, Assemblies and Materials Association, Solid content test method

ECA EIA-448-24-1994 Test Method 24 Solid State Switch Transfer Tests
ECA 448-24-1994 Test Method 24 Solid State Switch Transfer Tests

ECIA - Electronic Components Industry Association, Solid content test method

EIA-448-24-1994 Test Method 24 Solid State Switch Transfer Tests

Professional Standard - Aviation, Solid content test method

HB 6743-1993 Test method for determination of non-volatile content of room temperature vulcanizing sealants

工业和信息化部, Solid content test method

YD/T 3154-2016 Network electronic identity eID verification service interface testing method
YD/T 3155-2016 Test method for network electronic identity eID mobile application interface
YD/T 3156-2016 Test method for network electronic identity eID desktop application interface

European Committee for Standardization (CEN), Solid content test method

PD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
PD CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium

Malaysia Standards, Solid content test method

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

AASHTO - American Association of State Highway and Transportation Officials, Solid content test method

T229-1985 Standard Method of Test for Density of Solid Pitch and Asphalt (Displacement Method) (R 1993)
T 333-2007 Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems
T 103-2008 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing
T 103-2007 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing
T 103-1991 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing

GOSTR, Solid content test method

GOST R 59161-2020 Solid mineral fuels. Method for determination of phosphorus
GOST 29027-1991 Moisture meters for solid and dry substances. Specifications and testing methods

Professional Standard - Commodity Inspection, Solid content test method

SN/T 2880-2011 Method for Determination of Flammability of Solid Chemicals
SN/T 2172-2008 Determination of spontaneous combustion dangerous goods of flammable solide
SN/T 2173-2008 Determination of self heating for dangerous goods of flammable solids

国家质量监督检验检疫总局, Solid content test method

SN/T 4898-2017 Test methods for solid oxidation properties of dangerous goods Gravimetric method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Solid content test method

GJB 5420-2005 Fall off test method for solid rocket motor

International Organization for Standardization (ISO), Solid content test method

ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content

PT-IPQ, Solid content test method

NP 2874-1985

ES-AENOR, Solid content test method

PK-PSQCA, Solid content test method

PS 1373-1975 SPECIFICATION FOR METHOD FOR DETERMINATION OF ASH OF SOLID MINERAL FUELS

CEN - European Committee for Standardization, Solid content test method

PD CEN/TS 15400:2006 Solid recovered fuels - Methods for the determination of calorific value
PD CEN/TS 14918:2005 Solid Biofuels - Method for the determination of calorific value
PD CEN/TS 15412:2006 Solid recovered fuels - Methods for the determination of metallic aluminium

Defense Logistics Agency, Solid content test method

DLA MIL STD 750 3-2012 TEST METHOD STANDARD TRANSISTOR ELECTRICAL TEST METHODS FOR SEMICONDUCTOR DEVICES PART 3: TEST METHODS 3000 THROUGH 3999

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Solid content test method

PREN 3030-1992 Aerospace Series Test Method for Dry Film Lubricants Solids Content (Edition 1)

Taiwan Provincial Standard of the People's Republic of China, Solid content test method

CNS 14820-2004 Method of test for measuring toxic gases generated by solid material flammability － Gas detector tube

CO-ICONTEC, Solid content test method

ICONTEC 3224-1991

Society of Automotive Engineers (SAE), Solid content test method

SAE J426-1988 LIQUID PENETRANT TEST METHODS
SAE J426B-1974 LIQUID PENETRANT TEST METHODS
SAE J426C-1978 LIQUID PENETRANT TEST METHODS

SAE - SAE International, Solid content test method

SAE J426-1983 Liquid Penetrant Test Methods
SAE J426-2018 Liquid Penetrant Test Methods

国家市场监督管理总局、中国国家标准化管理委员会, Solid content test method

GB/T 36355-2018 Information technology—Test method of solid state disk