ZH
RU
ES

How to test solid

How to test solid, Total:499 items.

In the international standard classification, How to test solid involves: Plastics, Structures of buildings, Optoelectronics. Laser equipment, Construction materials, Waxes, bituminous materials and other petroleum products, Measurement of volume, mass, density, viscosity, Paints and varnishes, Analytical chemistry, Beverages, Wastes, Protection against fire, Farm buildings, structures and installations, Domestic, commercial and industrial heating appliances, Insulating fluids, Galvanic cells and batteries, Refractories, Mechanical testing, Insulating materials, Environmental testing, Soil quality. Pedology, Particle size analysis. Sieving, Components and accessories for telecommunications equipment, Coals, Road engineering, Products of the chemical industry, Products of the textile industry, Earthworks. Excavations. Foundation construction. Underground works, Veterinary medicine, Farming and forestry, Milk and milk products, Non-ferrous metals, Rubber, Protection against dangerous goods, Fuel cells, Water quality, Ceramics, Paint ingredients, Alarm and warning systems, Rubber and plastics products, Raw materials for rubber and plastics, Fuels, Leather technology, Non-destructive testing, Acoustics and acoustic measurements, Linear and angular measurements, Meat, meat products and other animal produce, Lubricants, industrial oils and related products, Paper production processes, Packaging materials and accessories, Adhesives, Mining equipment, Kitchen equipment, Shipbuilding and marine structures in general, Installations in buildings, Packaging and distribution of goods in general, Special purpose vehicles, Inks. Printing inks, Testing of metals, Nuclear energy engineering, Miscellaneous domestic and commercial equipment, Protective equipment, Lubrication systems, Electrical engineering in general, Thermodynamics and temperature measurements, Electricity. Magnetism. Electrical and magnetic measurements.

Professional Standard - Aerospace, How to test solid

QJ 2289-1992 Solid state relay test method
QJ 2443-1993 Solid strategic missile proficiency test method
QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
QJ 1359-1988 Composite solid propellant detonation heat test method isothermal method
QJ 2610-1994 Test method for solid rocket motor nozzle swing angle
QJ 970-1986 Rigid solid average linear expansion coefficient test method
QJ 1522-1988 Test method for low temperature linear thermal expansion coefficient of rigid solid
QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°
QJ 3236-2005 Measurement Method of Negative Thrust in Static Test of Solid Rocket Motor
QJ 3312-2008 Thrust Vector Measurement Method for Static Test of Solid Rocket Motor
QJ 2038.1-1991 Test method for bonding strength of solid rocket motor combustor interface Pull-off method
QJ 2038.2-1991 Solid Rocket Motor Combustion Chamber Interface Bonding Strength Test Method Shear Method
QJ 3279-2006 Test method for constant load performance of solid rocket motor liner interface bonding
QJ 3036-1998 Measurement method of temperature and noise in static test space of solid rocket motor
QJ 1469-1988 Test method for electrostatic spark sensitivity of composite solid propellants and other explosives
QJ 2038.1A-2004 Test method for interface bonding strength of solid rocket motor chamber--Part 1: Unstick test for rectangular specimen

Indonesia Standards, How to test solid

SNI 06-0480-1989 Solid plastic materials, Test method for density
SNI 06-3268-1994 Solid and liquid paraffin wax, Specification and test method
SNI 03-0348-1989 Solid concrete bricks, Specification and test method
SNI 06-1839-1990 Black liquor, Test method for total solid substances, total alkali and active alkali
SNI 06-6989.26-2005 Water and wastewater - Part 26: Test methods of total solid content by gravimetric analysis
SNI 06-6989.27-2005 Water and wastewater - Part 27: Test methods of total dissolved solid content by gravimetric analysis
SNI 7184.4-2010

PH-BPS, How to test solid

PNS ASTM C1603:2021 Standard Test Method for Measurement of Solids in Water

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to test solid

GB/T 15175-1994 Measurement methods for main parameter of solid-state lasers
GB/T 5597-1999 Test method for complex permittivity of solid dielectric materials at microwave frequencies
GB/T 10064-2006 Methods of test for the determination of the insulation resistance of solid insulating materials
GB 7265.1-87 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB 7265.1-1987 Test Method for Microwave Complex Permittivity of Solid Dielectric Perturbation Method
GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
GB 7265.2-1987 Test method of microwave complex permittivity of solid dielectric "open cavity" method
GB/T 17473.1-2008 Test method of precious metals pastes used for microelectronics.Determination of solids content
GB/T 17473.1-1998 Test methods of precious metal pastes used for thick film microelectronics--Determination of solids content
GB/T 9534-1988 Test method for complex permittivity of solid dielectric materials at millimeter wave frequencies using "Quasi-Optic cavity" technique
GB/T 9533-1988 Test method for dielectric properties of microwave solid dielectric materials Coaxial terminal short circuit method
GB/T 22689-2008 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges

American Society for Testing and Materials (ASTM), How to test solid

ASTM C1603-23 Standard Test Method for Measurement of Solids in Water
ASTM C1603-16 Standard Test Method for Measurement of Solids in Water
ASTM D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
ASTM C1603-10 Standard Test Method for Measurement of Solids in Water
ASTM D4359-90(2006) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D7579-09 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D757-77 Standard test method for determination of pyrolysis solids content in pyrolysis liquids by methanol solids filtration method
ASTM E1109-86(2004) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-86(1996) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D4359-90(2000)e1 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D4359-90(2019) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM D5232-92(1997) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D4359-90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
ASTM D5232-13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM C914-09(2022) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM G134-95(2006) Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D5744-07e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D4842-90(1996) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM D4842-90(2001) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM G134-95(2001)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM G134-95(2010)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E289-99 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM E289-04 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D6393-99(2006) Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393-99 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393/D6393M-21 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM D2508-93 Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM E3277-21 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM E3277-22 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D1389-06 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D6773-22 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
ASTM D1389-07 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D854-06e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D70-18 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM E289-04(2010) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D4804-03 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-98 Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-09 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-14 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM G72-01 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G72-82(1996)e1 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM G125-00 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2015) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2023) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM D5232-92(2003) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM D4804-19 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D5231-92(1998) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D4804-19a Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D3926-05(2019) Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
ASTM D4804-20 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D5744-96(2001) Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D4892-89(2004) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM C1241-00(2009) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D854-00 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-00e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D854-02 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D4906-95(2006) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
ASTM D4906-95 Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D4906-95(2001) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM C1241-00 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C1241-14 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D4892-14 Standard Test Method for Density of Solid Pitch 40;Helium Pycnometer Method41;
ASTM E289-17 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-11 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D7217-11 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5231-92(2003) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM F1307-90 Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM D5231-92(2008) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D4906-95(2017) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D5744-18 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5231-92(2016) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D4906-95(2023) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D3801-19a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM E662-18 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D5744-96 Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell
ASTM E662-21a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D3801-20 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM E662-05 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-09 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-17a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-17 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-19 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D7490-13(2022) Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D4713-92(1997)e1 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
ASTM D5744-07 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D495-99(2004) Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM E228-95 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Vitreous Silica Dilatometer
ASTM F1307-02 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM F1307-02(2007) Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM D495-99 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM D4713-92(2007) Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
ASTM E228-22 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM D4713-12(2020) Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D6866-20 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D2625-20 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
ASTM D7217-16 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5657-95 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D6343-14(2018) Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
ASTM E1225-04 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM D3801-06 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D2621-87(2000) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM E228-06 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM D2621-87(1995)e1 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM E1225-20 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM D2621-87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM E1225-09 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM E1225-13 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM D6502-10(2022) Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
ASTM D7309-21a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D7309-21 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D7309-20 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D7309-19 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D7309-19a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D6502-10 Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
ASTM D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM E2618-13(2019) Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
ASTM E2618-08 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
ASTM D6502-10(2015) Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
ASTM D5368-93(2001) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D6402-99(2009) Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
ASTM D5368-93 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D5368-93(2006) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D5368-13 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D5568-01 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
ASTM D5568-95 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
ASTM D6316-00 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

Military Standard of the People's Republic of China-General Armament Department, How to test solid

GJB 332A-2004 Test method for linear expansion coefficient of solid materials
GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K
GJB 2365-1995 Solid rocket motor stationary test test method
GJB 772.304-1991 Test methods for explosives - Electrical method for determination of detonation velocity of solid explosives
GJB 1059.1-1990 Phenolic resin test method for ablative materials Solid content test
GJB 2365A-2004 Test method for static test parameters of solid rocket motor
GJB 2365B-2021 Test method for static test parameters of solid rocket motor
GJB 332-1987 Test method for average linear expansion coefficient of rigid solids
GJB 9923-2021 Solid launch vehicle test launch cycle assessment method
GJB 330-1987 Test method for average specific heat capacity of solid materials from room temperature to 800°C
GJB 1059.1A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 1: Solids Content Test
GJB 604.2-1988 Test methods for explosives used in nuclear weapons - Determination of linear expansion coefficient of solid explosives
GJB 10018-2021 Composite solid propellant fixed load test and equilibrium modulus determination method
GJB 1802-1993 Test method for average linear expansion coefficient of low expansion rigid solid materials
GJB 1264.5-1994 Test methods for aviation turbine engine lubricating oils - Determination of solid particulate impurities
GJB 771.103-1989 Gunpowder performance test method Double base solid propellant powder shape and size measurement
GJB 772.305-1991 Explosives test methods Determination of polygonal index of detonation products of solid explosives Free surface velocity method
GJB 772.306-1991 Explosives Test Methods Determination of Critical Temperature of Calorimetric Explosion of Small Charges of Solid Explosives
GJB 771.108-1993 Test methods for gunpowder performance. Thermomechanical measurement method for glass transition temperature test of solid propellant and coating.

未注明发布机构, How to test solid

GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
BS 1881-112:1983(1998) Testing concrete — Part 112 : Methods of accelerated curing of test cubes
DIN EN 1860-1:2017 Grilling appliances, solid fuels and lighting aids – Part 1: Solid fuel grilling appliances – Requirements and test methods
BS EN 1860-3:2003(2006) Appliances, solid fuels and firelighters for barbecuing — Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances — Requirements and test methods

German Institute for Standardization, How to test solid

DIN 51700:2015-12 Testing of solid fuels - Generalities and index of methods of test
DIN CEN/TS 15883:2010-02*DIN SPEC 1101:2010-02 Residential solid fuel burning appliances - Emission test methods; German version CEN/TS 15883:2009
DIN EN 3030:1994-04 Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994
DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 15250:2007-06 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 / Note: DIN 18840 (2005-08) remains valid alongside this standard until 2007-09-01.*To be replaced by DIN EN 15250 (2012-10).
DIN EN 15250 Berichtigung 1:2015-05 Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007, Corrigendum to DIN EN 15250:2007-06
DIN EN 1860-1:2018-09 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods; German version EN 1860-1:2013+A1:2017+AC:2017
DIN EN 1860-1:2018 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
DIN EN 16510-1:2023 Residential solid fuel burning appliances - Part 1: General requirements and test methods
DIN 65467:1999-03 Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method
DIN EN IEC 62372:2023-03 Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution (IEC 62372:2021); German version EN IEC 62372:2022
DIN 51908:2022-10 Testing of carbonaceous materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
DIN EN 1860-4:2022 Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods; German and English version prEN 1860-4:2022
DIN EN 1860-4:2023-08 Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods; German version EN 1860-4:2023
DIN EN 60243-2:2001 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001); German version EN 60243-2:2001
DIN EN 957-6:2014-06 Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods; German version EN 957-6:2010+A1:2014 / Note: DIN EN 957-6 (2011-02) remains valid alongside this standard until 2014-10-31.
DIN EN ISO 20957-7:2021-09 Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO 20957-7:2020); German version EN ISO 20957-7:2021 / Note: To be replaced by DIN EN ISO 20957-7 (2022-05).
DIN 51045-2:2009-04 Determination of linear thermal expansion of solids - Part 2: Testing of fired fine ceramic materials using the dilatometer method

Professional Standard - Energy, How to test solid

NB/T 51019-2014 Method of compaction testing of solid backfilling materials
NB/T10820-2021
NB/T10821-2021
NB/T 10670-2021 Solid Oxide Fuel Cell Electrolyte Membranes Test Methods Part 1: Self-supporting Membranes
NB/T10670-2021

RO-ASRO, How to test solid

STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength
STAS E 12267-1984 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for the delt rminalion of the flammability in Llic case of exposure In an igniting source
STAS 12065-1982 Solid electrical insulating materials CONBINED FLEXIBLE MATERIALS Methods of test
STAS 9484/14-1974 SILICA-ALUMINA MINING PRODUCTS Methods of physical and mechanical tests. Determination of volume constancy
STAS 10369-1975 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the relative resistance to breakdown by surface discharges
STAS 10368-1982 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the electrolytic corrosion of metals in the presence of electrical insulating materials

CZ-CSN, How to test solid

CSN 57 0106 Cast.3-1984 Methods for testing oí frozen milk products. Determination of total solids content.
CSN 56 0240 Cast.3-1977 Testing methods for non-alcoholic drinks. Determination of solids by means of refractometer
CSN IEC 167:1993 Methods of test for the determination of the insultation resistance of solid insultating materials
CSN 57 0104 Cast.3-1984 Methods for testing of milk and liquid milk products. Determination of dry matter
CSN 57 0105 Cast.3-1978 Methods for testing of ilk and liquid mllk roducts. Determination f total solids content.
CSN 34 6460-1983 Methods of test for the determination of the d. c. insulation resistance of solid insulating materials
CSN 34 6468-1990 Test methods of solid insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing
CSN 57 0152-1986 Testing methods for meat products and canned sterilized food. Determination of solid and fluid particles and soluble free fat
CSN 66 8102 Cast.12-1978 Smokeless powders. Methods of teating. Determination of diphenylamine and centralite I in a single sample
CSN 57 0105-3-2003 Testing methods for dried milk and condensed milk products - Part 3: Evaporated and sweetened condensed milk. Determination of total solids content
CSN 46 3204-1986 Fresh citrus fruits. Testing methods for juice content, solids content, acidity and stage of maturity

ES-UNE, How to test solid

UNE-CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices - Guide to flash point testing (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN IEC 62372:2022 Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 16510-1:2019 Residential solid fuel burning appliances - Part 1: General requirements and test methods
UNE-EN 1860-1:2013+A1:2018 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods. (Consolidated version)
UNE-EN ISO 20957-7:2021 Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO 20957-7:2020)
UNE-EN 957-6:2011+A1:2014 Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
UNE-CEN/TS 16811-3:2015 Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods (Endorsed by AENOR in January of 2016.)

American National Standards Institute （ANSI), How to test solid

ANSI/ASTM D4804:1998 Test Method for Determining the Flammability Characteristics of Non-Rigid Solid Plastics (08.03)
ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ANSI/ASTM E662 REV A:2021 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
BS EN 1860-4:2023 Appliances, solid fuels and firelighters for barbecuing Single use barbecues burning solid fuels. Requirements and test methods (British Standard)
ANSI/ASTM D6097a:2001 Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ANSI/ASTM D2275:2001 Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01)

Danish Standards Foundation, How to test solid

DS/CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DS/EN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
DS/IEC 243-2:1991 Methods of test for electric strength of solid insulating materials. Part 2: Additional requirements for tests using direct voltage
DS/EN 13229/A2:2004 Inset appliances including open fires fired by solid fuels - Requirements and test methods
DS/EN 13229/A1:2003 Inset appliances including open fires fired by solid fuels - Requirements and test methods
DS/EN 13229:2001 Inset appliances including open fires fired by solid fuels - Requirements and test methods
DS/EN 1860-4:2005 Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
DS/EN 1860-3/A1:2006 Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods
DS/EN 1860-3:2004 Appliances, solid fuels and firelighters for barbecueing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods
DS/EN IEC 62282-7-2:2021 Fuel cell technologies – Part 7-2: Test methods – Single cell and stack performance tests for solid oxide fuel cells (SOFCs)

AENOR, How to test solid

UNE-CEN/TS 15883:2010 Residential solid fuel burning appliances - Emission test methods
UNE 21306:1976 METHODS OF TEST FOR THE DETERMINATION OF THE INSULATION RESISTANCE OF OLID INSULATING MATERIALS.
UNE-EN 3030:1996 AEROSPACE SERIES. TEST METHOD FOR DRY FILM LUBRICANTS. SOLIDS CONTENT.
UNE-EN 12815:2002 Residential cookers fired by solid fuel. Requirements and test methods.
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
UNE-EN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
UNE-EN 13229:2002/A2:2005 Inset appliances including open fires fired by solid fuels -Requirements and test methods
UNE-EN 1860-3:2004/A1:2006 Appliances, solid fuels and firelighters for barbecuing - Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods
UNE-EN 13229:2002 Inset appliances including open fires fired by solid fuels. Requirements and test methods.
UNE-EN 13229/A1:2003 Inset appliances including open fires fired by solid fuels. Requirements and test methods
UNE-EN 60707:2000 FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS
UNE-EN 1860-4:2005 Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
UNE-EN 1860-3:2004 Appliances, solid fuels and firelighters for barbecuing - Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods

API - American Petroleum Institute, How to test solid

API TR 10TR5 KAZAKH-2008 Methods for Testing of Solid and Rigid Centralizers (First Edition**)

Korean Agency for Technology and Standards (KATS), How to test solid

KS C 2105-2003(2018)
KS C 2004-1998 TEST METHOD FOR THE PROOF TRACKING INDICES OF SOLID ELECTRICAL INSULATING MATERIALS
KS C IEC 60167:2002 Methods of test for the determination of the insulation resistance of solid insulating materials
KS C IEC 60167:2017 Methods of test for the determination of the insulation resistance of solid insulating materials
KS B 0533-2005 Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS C 2127-1996(2016) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C 2131-1996(2016) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS B 0533-1995 Methods for measurement on ultrasonic velocity of solid by pulse technique using reference test pieces
KS C 2130-1996(2016) Testing method for high-voltage, low-current, dry arc resistance of solid electrical insulation
KS B 0533-2005(2010) Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces
KS B ISO 10774-2005(2010) Solid fuelled heaters－Test method for determining allowable clearances from combustible surfaces
KS C 2003-2003 TEST METHOD FOR DIELECTRIC STRENGTH AND TEMPERATURE DEPENDANCES OF SOLID ELECTRICAL INSULATING MATERIALS
KS C 2001-1998(2018)
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS M ISO 787-11-2007(2017) General methods of test for pigments and extenders－Part 11：Determination of tamped volume and apparent density after tamping
KS C 0291-2002 Environmental testing－Flammability of solid non－metallic materials when exposed to flame sources-list of test methods
KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS C 2003-1998 TEST METHOD FOR DIELECTRIC STRENGTH AND TEMPERATURE DEPENDANCES OF SOLID ELECTRICAL INSULATING MATERIALS

British Standards Institution (BSI), How to test solid

DD CEN/TS 15883:2009 Residential solid fuel burning appliances. Emission test methods
BS EN 1860-1:2013+A1:2017 Appliances, solid fuels and firelighters for barbecueing - Barbecues burning solid fuels. Requirements and test methods
BS EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD). General requirements and test methods
DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
12/30260516 DC BS EN 15250. Slow release appliances fired by solid fuel. Requirements and test methods
BS EN 60243-2:2001 Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage
BS 5350-B2:1976 Methods of test for adhesives - Adhesives - Determination of solids content
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS 3900-B10:1986 Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of hexavalent chromium content of solid matter
22/30447524 DC BS EN 50724. Fixed Ultrasonic Gas Leak Detectors (UGLD). General requirements and test methods
BS EN IEC 62372:2022 Nuclear instrumentation. Housed scintillators. Test methods of light output and intrinsic resolution
19/30386356 DC Stationary training equipment — Part 7: Rowing equipment, additional specific safety requirements and test methods. Part 7. Rowing equipment, additional specific safety requirements and test methods
BS PD IEC/TS 62282-7-2:2014 Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
BS EN IEC 62282-7-2:2021 Tracked Changes. Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells
22/30443216 DC BS EN 1860-4. Appliances, solid fuels and firelighters for barbecuing - Part 4. Single use barbecues burning solid fuels. Requirements and test methods
BS EN ISO 13982-2:2004 Protective clothing for use against solid particulates - Test method of determination of inward leakage of aerosols of fine particles into suits
21/30431519 DC BS EN 16510-1. Residential solid fuel burning appliances. Part 1. General requirements and test methods

国家能源局, How to test solid

NB/T 10820-2021 Solid oxide fuel cell single cell test method
NB/T 10821-2021 Solid oxide fuel cell stack test method
NB/T 51069-2017 Test method for thermal safety performance of polymer materials used in coal mine reinforcement of coal and rock mass

European Committee for Electrotechnical Standardization（CENELEC）, How to test solid

HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials
EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD) - General requirements and test methods
HD 441-1983 Methods of Test for the Determination of the Flammability of Solid Electrical Insulating Materials When Exposed to an Igniting Source
HD 541 S1-1991 Methods of Test for the Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to Electrically Heated Wire Sources
EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)

IN-BIS, How to test solid

IS 3396-1979
IS 12402 Pt.2-1988
IS 10083-1982
IS 2720 Pt.21-1977
IS 101 Pt.8/Sec.6-1993 Methods of sampling and test for paints, varnishes and related products. Part 8: Tests for pigments and other solids. Section 6: Volume solids
IS 9316 Pt.4-1988
IS 101 Pt.8/Sec.5-1993

Professional Standard - Military and Civilian Products, How to test solid

WJ 2396-1997 Test method for maximum range extinction ratio of solid-state pulsed laser range finder

International Electrotechnical Commission (IEC), How to test solid

IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials

NO-SN, How to test solid

NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles

PL-PKN, How to test solid

PN E04404-1986 Solid insulation materials Methods of test for electric strength at power frequencies
PN E04414-1986 Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source

Standard Association of Australia （SAA）, How to test solid

AS 1580.301.2:1990(R2013)
AS 1683.2:2001 Methods of test for elastomers - Latex, rubber - Determination of total solids content
AS 1012.14:2018 Methods of testing concrete, Method 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS 2300.1.1:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of total solids and moisture
AS 2300.1.1:2008
AS ISO 20957.7:2021 Stationary training equipment, Part 7: Rowing machines, additional specific safety requirements and test methods
AS ISO 20957.6:2021 Stationary training equipment, Part 6: Treadmills, additional specific safety requirements and test methods
AS 2300.2.11:1990 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of density and estimation of solids-not-fat (SNF) - Hydrometer method
AS 2300.1.2.2:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of nitrogen - Nitrogen fractions from milk

SE-SIS, How to test solid

SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
SIS SS IEC 243:1982 Recommended methods of test for electric strength of solid insulating materials at power frequencies
SIS SS 404 09 89-1992 Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
SIS SS-ISO 6962:1984 Standard method for testing the long term alpha irradiation stability of solidi- fied high-level radioactive waste forms

Professional Standard - Electron, How to test solid

SJ/T 10143-1991 Detail specification for electronic components--Semiconductor integrated circuits--CT54LS112/CT74LS112 dual J-K negative-edge flip-flop
SJ 20512-1995 Test methods for permittivity and permeability of microwave high loss solid materials

RU-GOST R, How to test solid

GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample
GOST R ISO 8573-4-2005 Compressed air. Part 4. Test methods for solid particle content
GOST R ISO 8573-8-2007 Compressed air. Part 8. Test methods for solid particle content by mass concentration
GOST R 50695-1994 Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source
GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity

Lithuanian Standards Office , How to test solid

LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
LST HD 568 S1-2002 Methods of test for the determination of the insulation resistance of solid insulating materials (IEC 60167:1964)
LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
LST HD 429 S1-2002 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980)
LST EN 1860-1-2003 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
LST EN 1860-1-2003/A1-2006 Appliances, solid fuels and firelighters for barbecuing - Part 1: Barbecues burning solid fuels - Requirements and test methods
LST EN 13229-2003 Inset appliances including open fires fired by solid fuels - Requirements and test methods
LST EN 13229-2003/A2-2004 Inset appliances including open fires fired by solid fuels - Requirements and test methods
LST EN 13229-2003/A1-2003 Inset appliances including open fires fired by solid fuels - Requirements and test methods
LST EN 13229-2003/AC-2006 Inset appliances including open fires fired by solid fuels - Requirements and test methods
LST EN 13229-2003/A2-2004/AC-2007 Inset appliances including open fires fired by solid fuels - Requirements and test methods
LST EN 1860-3-2004/A1-2006 Appliances, solid fuels and firelighters for barbecuing - Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods
LST EN 1860-4-2005 Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
LST EN 1860-3-2004 Appliances, solid fuels and firelighters for barbecuing - Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods

YU-JUS, How to test solid

JUS N.R2.503-1983 Aluminium electrolytic capacitors with solid and non-solid electrolyte. Selection of methods of test and general reguiremen ts
JUS N.R2.601-1980 Fixed tantahim capacitors with liquid or solid electrolyte. Sekction of methods of test and general reguirements
JUS N.R2.302-1983 Fixed multilayer ceramic chip capacitors. Selection of method of test and general requirements

Malaysia Standards, How to test solid

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

AASHTO - American Association of State Highway and Transportation Officials, How to test solid

T229-1985 Standard Method of Test for Density of Solid Pitch and Asphalt (Displacement Method) (R 1993)
T 333-2007 Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems
T 103-2008 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing
T 103-2007 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing
T 103-1991 Standard Method of Test for Soundness of Aggregates by Freezing and Thawing

Association Francaise de Normalisation, How to test solid

NF U47-016:2010 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test.
NF EN 3032:1994 Série aérospatiale - Méthode d'essai pour films lubrifiants solides - Mesurage de l'épaisseur
NF U47-017:2010 Animal health analysis methods - Detection of antibodies against equine Rhinopneumonia by the Complement Fixation Test
NF P21-384*NF EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners
NF EN 16630:2015 Modules fixes d'entraînement physique de plein air - Exigences de sécurité et méthodes d'essai
NF U47-016:2002 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test.
NF EN 16510-1:2022 Appareils de chauffage domestiques à combustion solide - Partie 1: exigences générales et méthodes d'essai
NF D37-101-1/IN1*NF EN 1860-1/IN1:2017 Appliances, solid fuels and firelighters for barbecueing - Part 1 : barbecues burning solid fuels - Requirements and test methods
NF D37-101-1*NF EN 1860-1+A1:2017 Appliances, solid fuels and firelighters for barbecueing - Part 1 : barbecues burning solid fuels - Requirements and test methods
NF D32-305-1*NF EN 16510-1:2018 Residential solid fuel burning appliances - Part 1 : general requirements and test methods
NF E51-308*NF ISO 8573-8:2004 Compressed air - Part 8 : test methods for solid particle content by mass concentration
NF EN 846-4:2002 Méthodes d'essai des composants accessoires de maçonnerie - Partie 4 : détermination de la résistance et de la rigidité des brides de fixation
NF EN 846-4/A1:2005 Méthodes d'essai des composants accessoires de maçonnerie - Partie 4 : détermination de la résistance et de la rigidité des brides de fixation
NF P30-317:2006 Travaux de couverture et de bardage - Éléments de fixation - Revêtements d'étanchéité et isolants-supports fixés mécaniquement - Méthode d'essai conventionnelle de la caractéristique "solide au pas" des fixations
NF EN 1860-1/IN1:2017 Appareils, combustibles solides et allume-feu pour la cuisson au barbecue - Partie 1 : barbecues utilisant les combustibles solides - Exigences et méthodes d'essai
NF EN 1860-1+A1:2017 Appareils, combustibles solides et allume-feu pour la cuisson au barbecue - Partie 1 : barbecues utilisant les combustibles solides - Exigences et méthodes d'essai
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF C26-227:1992 METHODS OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS. PART 2 : ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE.
NF U47-017:2002 Animal health analysis methods - Detection of antibodies against equine Rhinopneumonia by the Complement Fixation Test.
NF EN 1860-3:2004 Appareils, combustibles solides et allume-barbecue pour la cuisson au barbecue - Partie 3 : allume-feu pour l'allumage des combustibles solides dans les appareils de cuisson au barbecue - Exigences et méthodes d'essai
NF EN 1860-3/A1:2006 Appareils, combustibles solides et allume-barbecue pour la cuisson au barbecue - Partie 3 : allume-feu pour l'allumage des combustibles solides dans les appareils de cuisson au barbecue - Exigences et méthodes d'essai
NF EN ISO 20957-4:2017 Équipement d'entraînement fixe - Partie 4 : bancs pour haltères, exigences spécifiques de sécurité et méthodes d'essai supplémentaires
NF EN 957-6+A1:2014 Appareils d'entraînement fixes - Partie 6 : tapis de course, méthodes d'essai et exigences de sécurité spécifiques supplémentaires
NF EN 957-6/IN1:2014 Appareils d'entraînement fixes - Partie 6 : tapis de course, méthodes d'essai et exigences de sécurité spécifiques supplémentaires
NF C26-220:1980 Method of testing insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions.
NF C56-282-7-2*NF EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2 : test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
NF EN ISO 12224-2:1999 Fils d'apport de brasage, pleins et à flux incorporé - Spécifications et méthodes d'essai - Partie 2 : détermination de la teneur en flux.

International Organization for Standardization (ISO), How to test solid

ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content
ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration

PT-IPQ, How to test solid

NP 2874-1985

Japanese Industrial Standards Committee (JISC), How to test solid

JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)
JIS C 8841-3:2011 Small solid oxide fuel cell power systems -- Part 3: Performance testing methods and environment testing methods
JIS R 1761:2016 Testing method for gas permeability of porous ceramics using solid oxide fuel cell
JIS Z 2353:2003 Method for measurement on ultrasonic velocity of solid by pulse technique using reference test piece
JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration

KR-KS, How to test solid

KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

ES-AENOR, How to test solid

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to test solid

PREN 3030-1992 Aerospace Series Test Method for Dry Film Lubricants Solids Content (Edition 1)

GOSTR, How to test solid

GOST 29027-1991 Moisture meters for solid and dry substances. Specifications and testing methods

BE-NBN, How to test solid

NBN-EN 3030-1994 Aerospace series - Test method for dry film lubricants - Solids content

CEN - European Committee for Standardization, How to test solid

PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
PREN 13229-2011 Inset appliances including open fires fired by solid fuels - Requirements and test methods
EN 1860-4:2004 Appliances@ solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods

US-ACEI, How to test solid

IPC TM-650 2.3.34-1995 Solids Content, Flux; Revision B - January 1995(Test Methods Manual)

工业和信息化部/国家能源局, How to test solid

JB/T 12928-2016 Pressure wave test method for space charge distribution in solid insulating materials
JB/T 12927-2016 Electroacoustic pulse test method for space charge distribution in solid insulating materials

Guangdong Provincial Standard of the People's Republic of China, How to test solid

DB44/T 1232-2013 Test Method for Determination of Surface Tension of Solid Coatings, Substrates, and Pigments Contact Angle Method

SG-SPRING SG, How to test solid

SS 73 Pt.21-1992 Methods for sampling and testing of mineral aggregates,sand and fillers Part 21: Methods for determination of soundness

NZ-SNZ, How to test solid

NZS 4402.2.7.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils
NZS 4402.2.7.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils

Professional Standard - Automobile, How to test solid

QC/T 29105.3-1992 Sampling of test method for solid pollution degree of hydraulic oil in special automobile hydraulic system
QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system
QC/T 29105.4-1992 Test method for solid pollution degree of hydraulic oil in hydraulic system of special purpose vehicles Microscopic particle counting method
QC/T 29105.1-1992 Terminology and definition of test method for solid pollution degree of hydraulic oil in special automobile hydraulic system

Anhui Provincial Standard of the People's Republic of China, How to test solid

DB34/T 2334-2015 Test method for safety performance of polymer materials used in coal mines to strengthen coal and rock mass

CU-NC, How to test solid

NC 96-00-05-1989 Standards System for Fire Protection. Determination of Combustibility of Solid Materials and Substances. Testing Methods

European Committee for Standardization (CEN), How to test solid

HD 441 S1-1983 Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source
EN 16510-1:2018 Residential solid fuel burning appliances - Part 1: General requirements and test methods
prEN 16510-1-2021 Residential solid fuel burning appliances - Part 1: General requirements and test methods
EN 16510-1:2022 Residential solid fuel burning appliances - Part 1: General requirements and test methods
EN 1860-4:2023 Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
EN 464:1994 Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test)

AT-ON, How to test solid

OENORM EN 16510-1-2021 Residential solid fuel burning appliances - Part 1: General requirements and test methods

CENELEC - European Committee for Electrotechnical Standardization, How to test solid

EN 60707:1999 Flammability of Solid Non-Metallic Materials when Exposed to Flame Sources - List of Test Methods

Canadian General Standards Board （CGSB), How to test solid

CGSB 9.2 NO. 1-94-CAN/CGSB-1994 Methods of Testing Pulp and Paper Mill Effluents and Water Determination of Solids Contents of Pulp and Paper Mill Effluents
CGSB 9.2 NO.2-94-CAN/CGSB-1994 Methods of Testing Pulp and Paper Mill Effluents and Water Determination of Biochemical Oxygen Demand (BOD)

Professional Standard - Machinery, How to test solid

JB/T 3282-1999 Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges

US-FCR, How to test solid

FCR FED QSSSWS 1-1973 QUANTITY OF SOLUBLE SULFATE IN SOLID (SOIL OR ROCK) AND WATER SAMPLES, METHOD OF TEST FOR DETERMINING THE