ZH
RU
ES

Solid Test Method

Solid Test Method, Total:67 items.

In the international standard classification, Solid Test Method involves: Plastics, Farm buildings, structures and installations, Structures of buildings, Non-ferrous metals, Protection against fire, Products of the chemical industry, Optoelectronics. Laser equipment, Particle size analysis. Sieving, Water quality, Measurement of volume, mass, density, viscosity, Wastes, Construction materials, Road engineering, Domestic, commercial and industrial heating appliances.

Professional Standard - Aerospace, Solid Test Method

• QJ 2289-1992 Solid state relay test method
• QJ 2443-1993 Solid strategic missile proficiency test method
• QJ 1359-1988 Composite solid propellant detonation heat test method isothermal method
• QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
• QJ 970-1986 Rigid solid average linear expansion coefficient test method
• QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
• QJ 2610-1994 Test method for solid rocket motor nozzle swing angle

IN-BIS, Solid Test Method

• IS 10083-1982

Military Standard of the People's Republic of China-General Armament Department, Solid Test Method

• GJB 1059.1-1990 Phenolic resin test method for ablative materials Solid content test
• GJB 332A-2004 Test method for linear expansion coefficient of solid materials
• GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K
• GJB 332-1987 Test method for average linear expansion coefficient of rigid solids
• GJB 2365-1995 Solid rocket motor stationary test test method

Korean Agency for Technology and Standards (KATS), Solid Test Method

• KS B 0533-2005 Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Solid Test Method

• PREN 3030-1992 Aerospace Series Test Method for Dry Film Lubricants Solids Content (Edition 1)

Indonesia Standards, Solid Test Method

• SNI 06-0480-1989 Solid plastic materials, Test method for density
• SNI 03-0348-1989 Solid concrete bricks, Specification and test method

CZ-CSN, Solid Test Method

• CSN 57 0106 Cast.3-1984 Methods for testing oí frozen milk products. Determination of total solids content.

American Society for Testing and Materials (ASTM), Solid Test Method

• ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
• ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
• ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
• ASTM C1603-23 Standard Test Method for Measurement of Solids in Water
• ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
• ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
• ASTM D6393-99(2006) Standard Test Method for Bulk Solids Characterization by Carr Indices
• ASTM D6393-99 Standard Test Method for Bulk Solids Characterization by Carr Indices
• ASTM D6393/D6393M-21 Standard Test Method for Bulk Solids Characterization by Carr Indices
• ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
• ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
• ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
• ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
• ASTM C1603-16 Standard Test Method for Measurement of Solids in Water
• ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
• ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
• ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
• ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
• ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
• ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
• ASTM C1603-10 Standard Test Method for Measurement of Solids in Water

PH-BPS, Solid Test Method

• PNS ASTM C1603:2021 Standard Test Method for Measurement of Solids in Water

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid Test Method

• GB/T 17473.1-2008 Test method of precious metals pastes used for microelectronics.Determination of solids content
• GB/T 17473.1-1998 Test methods of precious metal pastes used for thick film microelectronics--Determination of solids content
• GB/T 15175-1994 Measurement methods for main parameter of solid-state lasers

American National Standards Institute （ANSI), Solid Test Method

• ANSI/ASTM D4804:1998 Test Method for Determining the Flammability Characteristics of Non-Rigid Solid Plastics (08.03)

Japanese Industrial Standards Committee (JISC), Solid Test Method

• JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)

RU-GOST R, Solid Test Method

• GOST R ISO 8573-4-2005 Compressed air. Part 4. Test methods for solid particle content

German Institute for Standardization, Solid Test Method

• DIN 51700:2015-12 Testing of solid fuels - Generalities and index of methods of test
• DIN EN 3030:1994-04 Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994
• DIN CEN/TS 15883:2010-02*DIN SPEC 1101:2010-02 Residential solid fuel burning appliances - Emission test methods; German version CEN/TS 15883:2009

Professional Standard - Automobile, Solid Test Method

• QC/T 29105.3-1992 Sampling of test method for solid pollution degree of hydraulic oil in special automobile hydraulic system
• QC/T 29105.1-1992 Terminology and definition of test method for solid pollution degree of hydraulic oil in special automobile hydraulic system
• QC/T 29105.4-1992 Test method for solid pollution degree of hydraulic oil in hydraulic system of special purpose vehicles Microscopic particle counting method
• QC/T 29105.2-1992 Test method for solid pollution degree of hydraulic oil in special automobile hydraulic system, device and cleaning of the device

RO-ASRO, Solid Test Method

• STAS E 12267-1984 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for the delt rminalion of the flammability in Llic case of exposure In an igniting source
• STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength

未注明发布机构, Solid Test Method

• GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K

International Organization for Standardization (ISO), Solid Test Method

• ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
• ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content

Professional Standard - Energy, Solid Test Method

• NB/T 51019-2014 Method of compaction testing of solid backfilling materials

API - American Petroleum Institute, Solid Test Method

• API TR 10TR5 KAZAKH-2008 Methods for Testing of Solid and Rigid Centralizers (First Edition**)

AENOR, Solid Test Method

• UNE-EN 3030:1996 AEROSPACE SERIES. TEST METHOD FOR DRY FILM LUBRICANTS. SOLIDS CONTENT.
• UNE-CEN/TS 15883:2010 Residential solid fuel burning appliances - Emission test methods

ES-UNE, Solid Test Method

• UNE-CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices - Guide to flash point testing (Endorsed by Asociación Española de Normalización in July of 2019.)

European Committee for Electrotechnical Standardization（CENELEC）, Solid Test Method

• HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials

Lithuanian Standards Office , Solid Test Method

• LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles

Danish Standards Foundation, Solid Test Method

• DS/CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods

British Standards Institution (BSI), Solid Test Method

• DD CEN/TS 15883:2009 Residential solid fuel burning appliances. Emission test methods

Others:   Solid Density Test Method, Solid Density Test, Solid Density Test Method, Solid Concentration Method, Solid Density Test, Test Solid UV, Solid UV test method, How to test solid, testing solid samples, Solid UV test method, Solid flammability test method, Solid content test method, Solid Surface Test Method, Test Solid UV, Solid Test Method, Solid content test, Solid Test Analysis, solid test, Solid flammability test method, Solid UV test.