ZH
RU
ES

peak area and

peak area and, Total:499 items.

In the international standard classification, peak area and involves: Buildings, Lubricants, industrial oils and related products, Fasteners, Screw threads, Construction industry, Iron and steel products, Raw materials for rubber and plastics, Shop fittings, Inorganic chemicals, Products of the chemical industry, Products of the textile industry, Vocabularies, Kitchen equipment, Packaging materials and accessories, Materials for the reinforcement of composites, Packaging and distribution of goods in general, Testing of metals, Paper and board, Nuclear energy engineering, Wood-based panels, Protective equipment, Road engineering, Water quality, Reinforced plastics, Analytical chemistry, Particle size analysis. Sieving, Linear and angular measurements, Measurement of fluid flow, Fuels, Refractories, Plastics, Road vehicle systems, Tyres, Fluid power systems, Elements of buildings, Technical drawings, Structures of buildings, Rubber and plastics products, Services, Installations in buildings, Cinematography, Surface treatment and coating, Agricultural machines, implements and equipment, Sports equipment and facilities, Construction technology, Non-textile floor coverings, Non-ferrous metals, Leather technology, Radiation measurements, Construction materials, Rubber, Farming and forestry, Geology. Meteorology. Hydrology, Insulating materials, Insulating fluids, Insulation, Paints and varnishes, Protection of and in buildings, Telecommunication systems, Cans. Tins. Tubes, Graphical symbols, Astronomy. Geodesy. Geography, Powder metallurgy, Materials for aerospace construction, Electrical equipment for working in special conditions, Road vehicles in general, Construction of airports, Ceramics, Soil quality. Pedology, IT terminal and other peripheral equipment, Manufacturing processes in the rubber and plastics industries.

German Institute for Standardization, peak area and

DIN 277-2:2005 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277:2021-08 Areas and volumes in building construction
DIN 277:2021 Areas and volumes in building construction
DIN 55520 Berichtigung 1:2018-11 Position areas for shipping packages, derived from the position areas 800 mm × 1200 mm and 1000 mm × 1200 mm; Corrigendum 1
DIN 277-1:2016 Areas and volumes of buildings - Part 1: Building construction
DIN 277-1:2005 Areas and volumes of buildings - Part 1: Terminology, bases of calculation
DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN 55520:1985 Position areas for shipping packages, derived from the position areas 800 mm × 1200 mm and 1000 mm × 1200 mm
DIN 1229:1996 Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas
DIN EN ISO 10352:2020-12 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN EN 1529:2000 Door leaves - Height, width, thickness and squareness - Tolerance classes; German version EN 1529:1999
DIN 68792:2016 Large area shuttering panels of veneer plywood for concrete and reinforced concrete
DIN 68792:1979 Large area shuttering panels of veneer plywood for concrete and reinforced concrete
DIN EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1
DIN EN ISO 2286-2:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-...
DIN EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
DIN EN ISO 25178-2:2012-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012); German version EN ISO 25178-2:2012 / Note: To be replaced by DIN EN ISO 25178-2 (2020-02).
DIN EN ISO 25178-700:2023-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022); German version EN ISO 25178-700:2023
DIN ISO 9119:1991 Cross-country skis; binding mounting area; requirements and test methods; identical with ISO 9119:1990
DIN 65571-3:1992-11 Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section
DIN EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998
DIN EN 14971:2006-04 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area; German version EN 14971:2006
DIN EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-2:2
DIN EN ISO 2420:2017-05 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017); German version EN ISO 2420:2017
DIN 68791:2016 Large area shuttering panels of core plywood for concrete and reinforced concrete
DIN 68791:1979 Large area shuttering panels of core plywood for concrete and reinforced concrete
DIN EN 15221-6:2011-12 Facility Management - Part 6: Area and Space Measurement in Facility Management; German version EN 15221-6:2011 / Note: To be replaced by DIN EN 15221-6 (2018-12).
DIN 68791:2016-08 Large area shuttering panels of core plywood for concrete and reinforced concrete
DIN 19580:2010-07 Drainage channels for vehicular and pedestrian areas - Durability, mass per unit area and evaluation of conformity / Note: Applies in conjunction with DIN EN 1433 (2005-09).
DIN 65571-1:1992 Aerospace; reinforcement fibres; determination of filament diameter and cross-sectional area of filament yarns; calculation method
DIN EN ISO 2286-3:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016); German version EN ISO 2286-3:2016
DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
DIN EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area; English version of DIN EN 14971:2006-04
DIN 68792:2016-08 Large area shuttering panels of veneer plywood for concrete and reinforced concrete
DIN V 19580:2003 Drainage channels for vehicular and pedestrian areas - Weathering resistance, mass per unit area and third party control
DIN 65571-3:1992 Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section
DIN 65571-1:1992-11 Aerospace; reinforcement fibres; determination of filament diameter and cross-sectional area of filament yarns; calculation method
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN ISO 25178-2:2023-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021); German version EN ISO 25178-2:2022
DIN 19580:2010 Drainage channels for vehicular and pedestrian areas - Durability, mass per unit area and evaluation of conformity
DIN 53220:1978 Paints, varnishes and similar coating materials; paint consumption required for coating an area, concepts and parameters
DIN 66134:1998-02 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)

American Society for Testing and Materials (ASTM), peak area and

ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D6556-19a Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-19 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM UOP425-86 Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
ASTM D6556-03 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-02 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-02a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-09 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-21 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-14 Standard Test Method for Carbon Blackmdash;Total and External Surface Area by Nitrogen Adsorption
ASTM UOP944-96 Surface Area of Fresh and Regenerated Catalyst
ASTM D4365-95(2008) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM D4365-13 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM C1407-98(2011)e1 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM C1407-98(2016) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM C1407-98 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
ASTM D4365-19 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM C1407-98(2005) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM C1407-23 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM B489-85(2003) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM D6556-17 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM B633-11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B633-13 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM D3663-03 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM B767-88(2021) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E2619-08 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E261-16 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM F870-23 Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM F870-94(2000) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM F870-94(2016) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM D6556-16 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(1994) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2001) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2016) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM B489-85(2013) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM D6556-10 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-04 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D5625-97(2002) Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM D5625-97 Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM D6556-00a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-01a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-01 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-07 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM A780/A780M-09 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM F2036-05e1 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM F2036-05 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM F2036-04 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM B200-85(1999) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
ASTM C1339-02(2008) Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

Korean Agency for Technology and Standards (KATS), peak area and

KS B 0249-2003 Stress area and bearing area for threaded fasteners
KS B 0249-1988 Stress area and bearing area for threaded fasteners
KS B 0249-2003(2018)
KS L 6804-2012 Carbon fibre-Determination of the tensile properties of the single-filament specimens
KS M ISO 11605:2008 Paper and board－Calibration of variable-area flowmeters
KS M ISO 11605:2003 Paper and board－Calibration of variable-area flowmeters
KS M ISO 2286-2:2012 Rubber- or plastics-coated fabrics-Determination of roll characteristics-Part 2:Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS M ISO 2286-2:2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS B ISO 7181-2006(2011) Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS A ISO 4069:2001 Building and civil engineering drawings－Representation of areas on sections and views－General principles
KS A ISO 4069:2006 Building and civil engineering drawings－Representation of areas on sections and views－General principles
KS M ISO 2286-2-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS B ISO 7181:2006 Hydraulic fluid power-Cylinders-Bore and rod area ratios
KS E 0005-1988(2003) GRAPHICAL SYMBOLS FOR USE ON GEOLOGICAL MAPS AND CROSS-SECTIONS(REPRESENTATION OF SEDIMENTARY ROCKS)
KS L 6804-2022 Carbon fibre — Determination of filament diameter and cross-sectional area
KS B ISO 7181:2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS B ISO 1992-1-2003(2008) Commericial refrigerated cabinets－Methods of test－Part 1：Calculation of linear dimensions, areas and volumes
KS B ISO 1992-1:2003 Commericial refrigerated cabinets-Methods of test-Part 1:Calculation of linear dimensions, areas and volumes
KS A ISO 74-2006(2016) Cinematography－Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film－Positions and dimensions
KS A ISO 74-2006(2021) Cinematography－Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film－Positions and dimensions
KS L ISO 3374:2003 Reinforcement products－Mat and fabics－Determination of mass per unit area
KS B 7853-2013 Testing method for turning area and turning circle of agricultural tractors
KS G ISO 8364-2014(2019) Alpine skis and bindings — Binding mounting area — Requirements and test methods
KS B 7853-2005(2010) Testing method for turning area and turning circle of agricultural tractors
KS K ISO 1763:2022 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
KS K ISO 1763-2010(2020) Carpets－Determination of number of tufts and/or loops per unit length and per unit area
KS K ISO 1763:2010 Carpets－Determination of number of tufts and/or loops per unit length and per unit area
KS F 2234-2016 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
KS E ISO 710-2-2008(2018) Graphical symbols for use on detailed maps, plans and geological cross-sections－Part 2：Representation of sedimentary rocks
KS E 0005-2005 GRAPHICAL SYMBOLS FOR USE ON GEOLOGICAL MAPS AND CROSS-SECTIONS(REPRESENTATION OF SEDIMENTARY ROCKS)
KS L ISO 3374-2003(2018) Reinforcement products－Mat and fabics－Determination of mass per unit area
KS M ISO 10352-2012(2017) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS A ISO 2907-2010(2020) Cinematography－Maximum projectable image area on 35 mm motion-picture film－Position and dimensions
KS M ISO 10352-2012(2022) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area

KR-KS, peak area and

KS B 0249-2003(2023)
KS M ISO 2286-2-2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
KS M ISO 11605-2003 Paper and board－Calibration of variable-area flowmeters
KS A ISO 4069-2001 Building and civil engineering drawings－Representation of areas on sections and views－General principles
KS B ISO 25178-2-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
KS K ISO 1763-2022 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
KS E ISO 710-2-2008(2023) Graphical symbols for use on detailed maps, plans and geological cross-sections－Part 2：Representation of sedimentary rocks
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS A ISO 8567-2015(2023) Cinematography — Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints — Position and dimensions

NO-SN, peak area and

NS 3940-2007 Areas and volumes of buildings
NS 3940-2012 Calculation of areas and volumes of buildings
NS 4476-1977 Machinery and equipment for bakeries - Sanitary requirements to volume measuring equipment

NL-NEN, peak area and

NEN 2320-1988 Areas and volumes of residential buildings and dwellings

HU-MSZT, peak area and

American Gear Manufacturers Association, peak area and

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair
AGMA 91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, peak area and

GB/T 16823.1-1997 Stress area and bearing area for theraded fasteners
GB/T 10722-2003 Carbon black-Determination of total and external surface area by nitrogen adsorption
GB/T 10722-2014 Carbon black.Determination of total and external surface area.Nitrogen adsorption test method
GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
GB/T 5816-1995 Catalysts and adsorvents--Determination of surface area
GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
GB/T 29762-2013 Carbon fibre.Determination of filament diameter and cross-section area
GB/T 29556-2013 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution,analysis area,and sample area viewed by the analyser
GB/T 4669-1995 Textiles--Woven fabrics--Determination of mass per unit length and mass per unit area
GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 1410-1989 Methods of test for volume resistivity and surface resistivity of solid insulating materials
GB/T 14645-1993 Textile fabrics. Burning behaviour. The 45°test determination of damaged area and ignition times
GB/T 4669-2008 Textiles.Woven fabrics.Determination of mass per unit length and mass per unit area
GB/T 14645-2014 Textiles.Burning behaviour.45° test determination of damaged area and ignition times
GB/T 11107-1989 Metallic and its compound powder--Determination of specific surface and particle size by air permeating method
GB/T 15964-2008 Carpets.Determination of number of tufts or loops per unit length and per unit area
GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results

AT-ON, peak area and

ONORM B 1800-2002 Determination of areas and volumes of buildings
OENORM EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
ONORM ISO 7181:1992 Hydraulic fluid power - Cylinders -Area ratios between bores and rods
ONORM EN 723-1996 Cooper and copper aoolys-Combustion method for determination of carbon on the inner surface of copper tubes or fittings

ESDU - Engineering Sciences Data Unit, peak area and

ESDU 02007 A-2003 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007 B-2009 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007-2002 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 03005-2003 AMOPS: Computer program for the calculation of area and moments of area of planar shapes.
TM 119-2002 Calculation of planar area and moment properties – theoretical background
TD MEMO 6511 A-1969 A method for estimating the pressure distribution between the crest and the trailing edge on the surface of an aerofoil section in a sonic stream.
TM 170-2012 Falcon 20: rolling on dry and snow-covered surfaces
ESDU 05024 A-2007 Flow through sudden contractions of duct area: pressure losses and flow characteristics
ESDU 05024-2005 Flow through sudden contractions of duct area: pressure losses and flow characteristics

Society of Automotive Engineers (SAE), peak area and

SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE J345A-1969 Wet or Dry Pavement Passenger Car Tire Peak and Locked Wheel Braking Traction
SAE J345-1969 WET OR DRY PAVEMENT PASSENGER CAR TIRE PEAK AND LOCKED WHEEL BRAKING TRACTION

SE-SIS, peak area and

SIS SS 02 10 51-1987 Area and volume of buildings - Terminology and measurement
SIS SS 02 10 52-1989 Area and volume of buildings -Terminology and measurement
SIS SS 81 73 21-1979 Doorsets — Testing — Dimensions and squarness
SIS SMS 2502-1974 Refrigerators for household use. Determination of externat dimensions, interna/ volumes and storage areas
SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio
SIS 83 25 11-1973 Carpets. Determination of number of tufts or loops per unit length and per unit area
SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
SIS SS 25 12 69-1981 Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area

International Organization for Standardization (ISO), peak area and

ISO 18852:2005 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 18852:2012 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures
ISO 11567:1995 Carbon fibre - Determination of filament diameter and cross-sectional area
ISO 11567:2018 Carbon fibre - Determination of filament diameter and cross-sectional area
ISO 7181:1991 Hydraulic fluid power; cylinders; bore and rod area ratios
ISO 1992-1:1974 Commercial refrigerated cabinets; methods of test; part 1: calculation of linear dimensions, areas and volumes
ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area
ISO 4287:1997/Amd 1:2009 Geometrical Product Specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Amendment 1: Peak count number
ISO 9836:2011 Performance standards in building - Definition and calculation of area and space indicators
ISO 9836:1992 Performance standards in building; definition and calculation of area and space indicators
ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
ISO 9836:2017 Performance standards in building - Definition and calculation of area and space indicators
ISO 1763:1986 Carpets; Determination of number of tufts and/or loopsn per unit length and per unit area
ISO 1763:1973 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
ISO 14309:2019 Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity
ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
ISO 2420:2017 | IULTCS/IUP 5 Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 3801:1977 Textiles; Woven fabrics; Determination of mass per unit length and mass per unit area
ISO 10352:1997 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 14309:2011 Rubber, vulcanized or thermoplastic - Determination of volume and/or surface resistivity
ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
ISO 3320:2013 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series
ISO 2106:1982 Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method
ISO 710-2:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections; Part II : Representation of sedimentary rocks
ISO/TR 10194:1989 Non-round general use light gauge metal containers — Nominal filling volumes and nominal cross-sections
ISO 23363:2020 Electrodeposited coatings and related finishes — Electroless Ni-P-ceramic composite coatings
ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 10352:1991 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
ISO 6719:1986 Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
ISO 1088:1985 Liquid flow measurement in open channels; Velocity-area methods; Collection and processing of data for determination of errors in measurement

British Standards Institution (BSI), peak area and

BS ISO 18852:2012 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS ISO 18852:2015 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS EN 441-3:1995 Refrigerated display cabinets - Linear dimensions, areas and volumes
BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
BS ISO 16900-12:2016 Respiratory protective devices. Methods of test and test equipment. Determination of volume-averaged work of breathing and peak respiratory pressures
BS EN ISO 10352:2020 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
19/30336188 DC BS EN ISO 10352. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN ISO 2286-2:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
20/30404177 DC BS EN ISO 25178-700. Geometrical product specifications (GPS). Surface texture: Areal. Part 700. Calibration, adjustment and verification of areal topography measuring instruments
BS EN ISO 25178-2:2012 Geometrical product specifications (GPS). Surface texture. Areal. Terms, definitions and surface texture parameters
BS ISO 11567:1995 Carbon fibre - Determination of filament diameter and cross-sectional area
BS ISO 11567:1996 Carbon fibre - Determination of filament diameter and cross-sectional area
BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
BS ISO 11567:2018 Carbon fibre. Determination of filament diameter and cross-sectional area
BS 5550 SubSec.2.2.3:1980 Cinematography. 16 mm film. Image areas. Specification for positions and dimensions of picture image area and photographic sound record on 16 mm motion-picture release prints
PD CLC/TR 50480:2011 Determination of cross-sectional area of conductors and selection of protective devices
BS EN 15221-6:2011 Facility management. Area and space measurement in facility management
BS EN 951:1999 Door leaves - Method for measurement of height, width, thickness and squareness
BS EN ISO 25178-2:2022 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal. Terms, definitions and surface texture parameters
BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
BS ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area
BS 2866:1984 Methods for determination of the mass of warp and weft per unit area of fabric
BS 7641:1993 Performance standards in building - Definition and calculation of area and space indicators
BS ISO 9836:2011 Performance standards in building. Definition and calculation of area and space indicators
BS ISO 14309:2011 Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
BS EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets
BS EN 1849-2:2010 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets
BS EN ISO 2420:2017 Leather. Physical and mechanical tests. Determination of apparent density and mass per unit area
19/30397789 DC BS EN ISO 25178-2. Geometrical product specifications (GPS). Surface texture: Areal. Part 2. Terms, definitions and surface texture parameters
BS EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit of length and unit area
BS EN ISO 4528:2000 Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
BS EN ISO 4528:2009 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles
BS ISO TR 10194:1989 Non-round general use light gauge metal containers - Nominal filling volumes and nominal cross-sections
BS ISO TR 10194:1996 Non-round general use light gauge metal containers. Nominal filling volumes and nominal cross-sections
BS 2471:2005 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
BS 5293-12:1996 Sampling and testing carbon black for use in the rubber industry - Methods for determination of surface area by surfactant adsorption
BS ISO 3320:2013 Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
BS EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
BS EN ISO 10352:2010 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
BS ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
BS EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique
BS EN 13036-1:2002 Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique

BR-ABNT, peak area and

ABNT P-MB-329-1971

Standard Association of Australia （SAA）, peak area and

AS 1731.3:2003/Amdt 1:2005
AS 1731.3:2003(R2013)
AS 1731.3:2003 Refrigerated display cabinets - Linear dimensions, areas and volumes
AS/NZS 1301.426s:1994 Methods of test for pulp and paper - Determination of thickness and apparent bulk density or apparent sheet density
AS 1731.3/AMD 1:2005 Amendment No.1 to AS 1731.3-2003 Refrigerated display cabinets Part 3: Linear dimensions,areas and volumes
AS/NZS 4257.3:1994 Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit area of sheet
AS/NZS 2111.3:1996 Textile floor coverings - Tests and measurements - Determination of mass per unit area

Danish Standards Foundation, peak area and

DS 13000:2007 Measurement of buildings, concepts of area and volume
DS 13000:2021 Measurement of buildings, concepts of area and volume – CORRECTIONS 1
DS/EN ISO 4287/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number
DS 2111.9:1982 Building and civil engineering drawings. Representation of areas on views and sections
DS/EN ISO 2286-2:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DS/EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
DS/EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
DS/EN 15221-6:2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
DS/EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
DS/INF 49:1990 Non-round general use light gauge metal containers. Nominal filling volumes and nominal cross-sections
DS/EN 1849-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets

BE-NBN, peak area and

NBN B 06-002-1983
NBN-ISO 9836:1992 Performance standards in building - Definition and calculation of area and space indicators

Association Francaise de Normalisation, peak area and

NF T45-023*NF ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
NF ISO 18852:2015 Ingrédients de mélange du caoutchouc - Détermination de la surface par adsorption d'azote (NSA) et de la surface par épaisseur statistique (STSA) par méthode multipoints
NF B56-013:1980 Panneaux fibragglo - Détermination de la masse volumique et de la masse surfacique
NF T57-511*NF EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
NF D74-005-3:1994 Regrigerated display cabinets. Part 3 : linear dimensions, areas and volumes.
NF G37-102-2*NF EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2 : methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
NF S76-020-12*NF ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12 : determination of volume-averaged work of breathing and peak respiratory pressures
NF T25-106*NF ISO 11567:1997 Carbon fibre. Determination of filament diameter and cross-sectional area.
NF EN 61076-4-001:1997 Fibres de carbone - Détermination du diamètre et de l'aire de la section transversale des filaments
NF ISO 11567:1997 Fibres de carbone - Détermination du diamètre et de l'aire de la section transversale des filaments
NF EN ISO 19712-1:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 1 : classification et spécifications
NF E05-031-2*NF EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2 : terms, definitions and surface texture parameters
NF C15-105:1991 Determination of cross-sectional area of conductors and selection of protective devices
NF G35-004:1987 Carpets. Determination of number of tufts and/or loops per unit length and per unit area.
NF X11-601:1979 Sieving and granulometry. Determination of the area per unit of mass or volume of powders by permeametry. Lea and nurse method.
NF EN 14971:2006 Textiles - Étoffes tricotées - Détermination du nombre de mailles par unité de longueur et unité de surface
NF EN ISO 22553-12:2021 Peintures et vernis - Peintures d'électrodéposition - Partie 12 : sédimentation sur des surfaces horizontales
NF G52-011*NF EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
NF EN 16074:2019 Peintures et vernis - Détermination de la teneur en matière non volatile et du rendement superficiel spécifique de revêtements pour prélaquage
NF G07-169*NF EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area.
UTE C15-105U*UTE C15-105:2003 Determination of cross-sectional area of conductors and selection of protective devices - Pratical methods
NF G38-108:1995 Geotextiles and geotextiles and geotextile-related products. Determination of mass per unit area.
NF A91-155*NF EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
NF ISO 3320:2014 Transmissions et composants hydrauliques et pneumatiques - Alésages des vérins et diamètres des tiges de piston et rapports de surfaces - Série métrique
NF E48-019*NF ISO 3320:2014 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
UTE C17-205U-1999 Public lighting installation - Determination of cross-sectional Area of conductors and selection of protective devices.
FD C17-205/A1:2019 Outdoor electrical installation - Determination of the cross-sectional area of conductors and selection of protective devices
NF EN ISO 10352:2020 Plastiques renforcés de fibres - Mélanges à mouler et préimprégnés - Détermination de la masse surfacique et de la masse des fibres par unité de surface
NF A91-488*NF EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
NF T57-511:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area.
NF T57-511:1997 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area.
NF G07-169:1994 Textiles. Tests for knitted fabrics. Determination of number of stiches per unit length and unit surface.

BG-BDS, peak area and

BGC EN 441-3-2000 Refrigerated display cabinets - Part 3: Linear dimensions, areas and volumes

European Committee for Standardization (CEN), peak area and

EN 441-3:1994 Refrigerated Display Cabinets - Part 3: Linear Dimensions, Areas and Volumes
prEN 441-3-1991 Commercial refrigerated cabinets; part 3: calculation of linear dimensions, areas and volumes
EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
EN ISO 2286-2:1998 Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass Per Unit Area, Mass Per Unit Area of Coating and Mass Per Unit Area of Substrate ISO 2286-2:1998
FprEN ISO 25178-2:2021 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO/FDIS 25178-2:2021)
EN 951:1998 Door leaves - Method for measurement of height, width, thickness and squareness
EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
prEN 965-1992 Geotextiles and geotextile-related products; determination of mass per unit area
EN 965:1995 Geotextiles and Geotextile-Related Products - Determination of Mass per Unit Area
EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
EN 2557:1997 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
EN 1007-3:2002 Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area
EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
EN ISO 10352:1997 Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area
EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)

Professional Standard - Energy, peak area and

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst

未注明发布机构, peak area and

BS EN 441-3:1995(1999) Refrigerated display cabinets — Part 3 : Linear dimensions, areas and volumes
BS ISO 11567:2018(2020) Carbon fibre — Determination of filament diameter and cross - sectional area
BS ISO 9836:2011(2013) Performance standards in building — Definition and calculation of area and space indicators
DIN EN ISO 10352:1997 Fiber-reinforced plastics – molding compounds and prepregs – determination of the basis weight

Group Standards of the People's Republic of China, peak area and

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/JCMS 0007-2022 Determination of the ultimate aerobic biodegradability of polylactic acid biodegradable materials under controlled composting conditions —Method by calculating the peak area of terahertz wide spectrum
T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method

Japanese Industrial Standards Committee (JISC), peak area and

JIS R 7607:2000 Carbon fibre -- Determination of filament diameter and cross-sectional area
JIS K 6217-7:2008 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
JIS K 6217-7:2013 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
JIS B 8611-1:1999 Commercial refrigerated cabinets -- Methods of test -- Part 1: Calculation of linear dimensions, areas and volumes
JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate
JIS K 6271:2001 Rubber, vulcanized or thermoplastics -- Determination of volume and surface resistivity
JIS K 6271:2008 Rubber, vulcanized or thermoplastic -- Determination of volume and surface resistivity
JIS H 8688:2013 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings

PL-PKN, peak area and

PN H04185-1992 Refractory materials. Determination of bulk density, apparent porosity, true porosity and water absorbability
PN B02365-1970 Surface area of buildings. Classification, definitions and methods of measurement
PN-EN ISO 10352-2021-02 E Fibre-reinforced plastics--Moulding compounds and prepregs--Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
PN C89652-1987 Porous materials and powders The BET method for the determination of the specific surface area
PN C04404-11-1988 Pigments for paints General methods of test Determination of the specific surface area and texture
PN B20106-2020-12 P Thermal insulation of buildings equipment and industrial installations -- Methods for determining the area of thermal insulation

Canadian General Standards Board （CGSB), peak area and

CGSB 200.2-M79-CAN/CGSB-1979 Common Image Area for Paper Sizes P4 and A4
CGSB 148.1 NO.2-M85-CAN/CGSB-1985 Methodes D'Essai Pour Geotextiles Et Geomembranes Masse Surfacique

CZ-CSN, peak area and

CSN 49 0162-1975 Testing of physical and mechanical pro- perties of chipboards. Volume weight and square weight
CSN 50 0311-1983 Paper testing. Determination of thiokness, pparent density and speciíic volume
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities

PT-IPQ, peak area and

American National Standards Institute （ANSI), peak area and

ANSI/TAPPI T410 om-2013 Grammage of paper and paperboard (weight per unit area)
ANSI N13.12-2013 Surface and Volume Radioactivity Standards for Clearance
ANSI X3.117-1984 Information Systems - Text and Facsimile Communication Equipment - Printable/ Image Areas
ANSI/ASTM E2619:2009 Practice for Measuring and Calculating Building Loss Features that Take Up Floor Area in Buildings
ANSI/ASABE S593.1-2011 Terminology and Definitions for Biomass Production, Harvesting and Collection, Storage, Processing, Conversion and Utilization
ANSI/ASAE S422-1995 Mapping Symbols and Nomenclature for Erosion and Sediment Control Plans for Land Disturbing Activities

IT-UNI, peak area and

UNI EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
UNI 4288-1972
UNI 4870-1961

ES-UNE, peak area and

UNE-EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
UNE 16507-3:1999 ERRATUM Guide for determination of cross-sectional area of conductors and selection of protective devices.
UNE-EN ISO 25178-2:2023 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 2420:2018 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017)

AASHTO - American Association of State Highway and Transportation Officials, peak area and

DIVISION I 10.9-1996 Effective Area of Angles and Tee Sections in Tension (Interim 2000)

IN-BIS, peak area and

IPC - Association Connecting Electronics Industries, peak area and

IPC TM-650 2.5.17.1A-1994 Volume and Surface Resistivity of Dielectric Materials
IPC TM-650 2.5.17E-1998 Volume Resistivity and Surface Resistance of Printed Wiring Materials
IPC TM-650 2.5.17D-1986 Volume Resistivity and Surface Resistance of Printed Wiring Materials

Association of German Mechanical Engineers, peak area and

VDI/VDE 3513 Blatt 3-1989 Variable-area flowmeters; selection and installation recommendations

CH-SNV, peak area and

SN EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test

Lithuanian Standards Office , peak area and

LST EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
LST EN ISO 2286-2:2000 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
LST EN ISO 4287:2007/A1:2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)
LST ISO 3801:1998 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
LST EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
LST EN 14971-2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
LST EN 15221-6-2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
LST EN 1849-2-2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets

SAE - SAE International, peak area and

SAE J345-1968 WET OR DRY PAVEMENT PASSENGER CAR TIRE PEAK AND LOCKED WHEEL BRAKING TRACTION
SAE J345-2018 WET OR DRY PAVEMENT PASSENGER CAR TIRE PEAK AND LOCKED WHEEL BRAKING TRACTION

RU-GOST R, peak area and

GOST 26666.7-1989 Man-made knitted fur. Method for determination of linear dimensions and area
GOST 32666-2014 Carbon fibre. Determination filament's diameter and cross-sectional area
GOST R 55398-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of thickness and mass per unit area
GOST 24229-1980 70-, 35- and 16-mm motion-picturi cameras. Printed areas. Dimensions and position. Control methods
GOST 5862-1979 Ceramic insulators and covers for voltage over 1000 V. General specifications
GOST 25937-1983 Materials for shoes. Method for determination of specific volume and surface resistance
GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
GOST EN 1849-1-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Methods for determination of thickness and mass per unit area

API - American Petroleum Institute, peak area and

API PUBL 4540-1992 Area and Volume Source Air Quality Model Performance Evaluation Phase II Final Report

Universal Oil Products Company (UOP), peak area and

UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

GM Europe, peak area and

GME17009-2013 Porosities and Surface-Discontinuities Forks Shift / Transmission M1x Porosit鋞en und Oberfl鋍hen-Fehlstellen Schaltgabeln / Getriebe M1x Issue 1; English/German; Includes Appendix A and B

AENOR, peak area and

UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
UNE-EN ISO 4287:1999/A1:2010 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)
UNE 40339:2002 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area.
UNE 202002:2000 IN Guide for determination of cross-sectional area of conductors and selection of protective devices.
UNE 40258:1996 CARPETS. DETERMINATION OF NUMBER OF TUFS AND/OR LOOPS PER UNIT LENGTH AND PER UNIT AREA.
UNE-EN ISO 25178-2:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
UNE-EN 14971:2006 Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
UNE 22601:1974 SEDIMENTARY ROCK REPRESENTATION, IN GEOLOGICAL SECTIONS AND DETAIL COLUMNS. GRAPHYCAL SYMBOLS.
UNE-EN 15221-6:2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
UNE 60510:2013 Gaseous fuels. Sizes, connections and superficial finishes of the diaphragm volume gas meters.
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
UNE-EN 1849-2:2010 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
UNE 40600-6:1996 TEXTILES. WOVEN FABRICS. CONSTRUCTION. METHODS OF ANALYSIS. PART 6: DETERMINATION OF THE MASS OF WARP AND WEFT PER UNIT AREA OF FABRIC.

Professional Standard - Chemical Industry, peak area and

HG/T 3050.2-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 2:Method for determination of total mass per unit area,mass per unit area of coating and mass per unit area of substrate
HG/T 3331-1978 Method of determining volume resistivity and surface resistivity of insulating paint film
HG/T 3331-2012 Determination of volume resistivity and surface resistivity of insullac films
HG 2-59-1978 Method for determination of volume resistivity and surface resistivity of insulating paint film

工业和信息化部, peak area and

HG/T 3050.2-2020 Determination of properties of whole rolls of rubber or plastic coated fabrics Part 2: Methods for determination of total mass per unit area, coating mass per unit area and mass of base fabric per unit area

VN-TCVN, peak area and

TCVN 7180-1-2002 Commercial refrigerated cabinets.Methods of test.Part 1: Calculation of linear dimensions, areas and volumes
TCVN 7837-2-2007 Rubber.or plastics-coated fabrics.Determination of roll characteristics.Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

European Committee for Electrotechnical Standardization（CENELEC）, peak area and

CLC/TR 50480:2011 Determination of cross-sectional area of conductors and selection of protective devices

Indonesia Standards, peak area and

SNI 03-7012-2004 Smoke management systems in malls, atria and large areas
SNI ISO 3801:2010 Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area)

RO-ASRO, peak area and

STAS 8750/3-1972 CARPETS AND MOQUETTES Determination of mass per unit area
STAS 12708-1989 WOVEN FABRICS Determination of mass of warp and weft per unit area of fabric
STAS 6107-1981 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for volume and sur- face resistivity and of insution resistance
STAS 8750/9-1974 TEXTILE FLOOR COVERINGS Determination of 'number of tufts or loops per unit length and per unit area

Professional Standard - Textile, peak area and

FZ/T 01033-1993 Determination of the mass per unit area and the amount of pile (cover) of pile fabrics
FZ/T 01033-2012 Test method of mass per unit area and pile percent of pile fabric

US-CFR-file, peak area and

CFR 7-718.102-2014 Agriculture. Part 718:Provisions applicable to multiple programs. SubpartB:Determination of Acreage and Compliance. Section718.102:Acreage reports.

ISA - International Society of Automation, peak area and

ISA RP16.6-1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters)
ISA RP16.4-1960 Nomenclature and Terminology for Extension - Type Variable Area Meters (Rotameters)

国家市场监督管理总局、中国国家标准化管理委员会, peak area and

GB/T 39500-2020 Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area
GB/T 40719-2021 Rubber,vulcanized or thermoplastic—Determination of volume and/or surface resistivity
GB/T 11107-2018 Metallic and its compound powder—Determination of specific surface and particle size—Air permeating method

Canadian Standards Association (CSA), peak area and

CSA Z804-08 UPD 1-2009 Sustainable forest management for woodlots and other small area forests First Edition
CSA Z804-2008 Sustainable forest management for woodlots and other small area forests (First Edition)
CSA Z804 UPD 1-2009 Sustainable forest management for woodlots and other small area forests (First Edition)

AGMA - American Gear Manufacturers Association, peak area and

91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method

农业农村部, peak area and

NY/T 2894-2016 Determination of backfat thickness and eye muscle area in living pigs using B-type ultrasonic method

国家能源局, peak area and

SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution

CU-NC, peak area and

NC 53-133-1984 Construction Design Elaboration Surfaces and Volumes in Buildings Classification and Calculation Methods

CEN - European Committee for Standardization, peak area and

EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
PREN 15221-6-2018 Facility Management - Part 6: Area and Space Measurement in Facility Management

International Electrotechnical Commission (IEC), peak area and

IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

(U.S.) Ford Automotive Standards, peak area and

FORD FLTM EU-BS 050-2-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS
FORD FLTM EU-BS 050-02-2000 DETERMINATION OF DENSITY AND THICKNESS OF BOARDS AND WEIGHT PER UNIT AREA OF COATED BOARDS

YU-JUS, peak area and

JUS U.A9.201-1988 Spatial needs of disabled people in buildings and environment. Flat-surface irculation areas. Access and passing spaces
JUS U.A9.203-1988 Spatial needs of disabled people ±n bu?ldings and environment. Flat-surface irculation areas. Slope and beight of curbstone
JUS Z.M0.505-1991 Packaging - Position areas for shipping packages, derived from the position areas 800 mm x 1200mm and 1000mm x 1200mm
JUS U.A9.202-1988 Spatial needs of disable? people in buildings and environment. Fiat surface circu- ation areas. Pedestrian crossings and zones

VE-FONDONORMA, peak area and

COVENIN 747-1974

PK-PSQCA, peak area and

PS 143-1961 DETERMINATION OFWEIGHT PER UNIT LENGTH AND WEIGHT PER UNIT AREA OF WOVEN OR KNITTED FABRICS

FI-SFS, peak area and

SFS 3192-1974

US-FCR, peak area and

FCR COE CERC-92-7 FINAL REPORT-1992 LONG-TERM PROFILE AND SEDIMENT MORPHODYNAMICS: FIELD RESEARCH FACILITY CASE HISTORY

ZA-SANS, peak area and

SANS 147:1986 Carpets - Determination of number of tufts and/or loops per unit length and per unit area

Taiwan Provincial Standard of the People's Republic of China, peak area and

CNS 8759-1987 Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens

The American Road & Transportation Builders Association, peak area and

AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens

Society of Motion Picture and Television Engineers (SMPTE), peak area and

SMPTE ST 211M-2001 Motion-Picture Film - 16- and 35-mm Variable-Area Photographic Audio Records - Signal-to-Noise Ratio

IX-SA, peak area and

AS 1587:1973

ES-AENOR, peak area and

American Welding Society (AWS), peak area and

WRC 478:2003 Stress Intensity And Crack Growth Opening Area Solutions For Through-Wall Cracks In Cylinders And Spheres