ZH
RU
ES
Indoor Air Testing Equipment
Indoor Air Testing Equipment, Total:189 items.
In the international standard classification, Indoor Air Testing Equipment involves: Air quality, Construction industry, Installations in buildings, Environmental testing, Miscellaneous domestic and commercial equipment, Environmental protection, Acoustics and acoustic measurements, Ventilators. Fans. Air-conditioners, Heat pumps, Services, Occupational safety. Industrial hygiene, Alarm and warning systems, Electrical equipment for working in special conditions, Internal combustion engines for road vehicles, Civil engineering in general, Insulation, Explosion protection, Mechanical structures for electronic equipment, Passenger cars. Caravans and light trailers, Small craft, Domestic, commercial and industrial heating appliances, Road vehicle systems, Shipbuilding and marine structures in general, Kitchen equipment, Switchgear and controlgear, Construction of railways, Construction equipment, Measurement of volume, mass, density, viscosity, Protective equipment.
RU-GOST R, Indoor Air Testing Equipment
- GOST ISO 16000-30-2017 Indoor air. Part 30. Sensory testing of indoor air
- GOST ISO 16000-29-2017 Indoor air. Part 29. Test methods for VOC detectors
- GOST ISO 16000-21-2016 Indoor air. Part 21. Detection and enumeration of moulds. Sampling from materials
- GOST R ISO 16000-16-2012 Indoor air. Part 16. Detection and enumeration of moulds. Sampling by filtration
- GOST R ISO 16000-18-2013 Indoor air. Part 18. Detection and enumeration of moulds. Sampling by impaction
- GOST ISO 16000-20-2017 Indoor air. Part 20. Detection and enumeration of moulds. Determination of total spore count
- GOST R ISO 16000-17-2012 Indoor air. Part 17. Detection and enumeration of moulds. Culture-based method
- GOST 31338-2006 Acoustics. Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
- GOST R 52137-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 2. Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
- GOST R 52138-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 3. Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Indoor Air Testing Equipment
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Indoor Air Testing Equipment
British Standards Institution (BSI), Indoor Air Testing Equipment
- 12/30262107 DC BS ISO 16000-30. Indoor air. Part 30. Sensory testing of indoor air
- BS ISO 16000-18:2011 Indoor air. Detection and enumeration of moulds. Sampling by impaction
- BS ISO 16000-16:2009 Indoor air. Detection and enumeration of moulds. Sampling by filtration
- BS ISO 16000-21:2014 Indoor air. Detection and enumeration of moulds. Sampling from materials
- BS ISO 16000-16:2008 Indoor air - Detection and enumeration of moulds - Sampling by filtration
- BS ISO 16000-21:2013 Indoor air. Detection and enumeration of moulds. Sampling from materials
- BS ISO 16000-20:2014 Indoor air. Detection and enumeration of moulds. Determination of total spore count
- BS 8494:2007 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air - Requirements and test methods
- BS ISO 27327-1:2010 Fans. Air curtain units. Laboratory methods of testing for aerodynamic performance rating
- BS ISO 27327-1:2009 Fans - Air curtain units - Laboratory methods of testing for aerodynamic performance rating
- BS EN 13779:2007 Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems
- BS EN 13779:2007(2014) Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems
- BS EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
- BS EN 50056:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100% (V/V) methane in air
- BS EN 50055:1991 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
- BS EN 50055:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
- BS EN 50244:2016 Tracked Changes. Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
- BS EN 13141-1:2004 Ventilation for buildings - Performance testing of components/products for residential ventilation - Externally and internally mounted air transfer devices
- BS EN IEC 62610-6:2020 Mechanical structures for electrical and electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Air recirculation and bypass of indoor cabinets
- BS EN 45544-2:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Performance requirements for apparatus used for measuring concentrations in the region of limit values
Group Standards of the People's Republic of China, Indoor Air Testing Equipment
- T/CASME 849-2023 Technical requirements for indoor air detection
- T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard
- T/CECS 569-2019 Standard for measurement method of indoor air radon
- T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
- T/ZS 0314-2022 Operating rules for indoor air quality inspection of civil buildings
- T/GZZH 006-2023 Instructions for use of indoor air pollution on-site detection instruments
- T/GDBX 063-2022 On-line fast detection method of trace components in vehicle cabin air
- T/CCBD 9-2020 Brand evaluation —Testing organizations of indoor air quality and related product
- T/CECS 539-2018 Standard for determination of benzene and its analogies and total volatile organic compounds in indoor air
- T/CEC 514-2021 72.5kV～252kV gas insulated metal-enclosed switchgear internal overheating infrared detection technical specification
TR-TSE, Indoor Air Testing Equipment
- TS 2386-1976 SAFETY REQUIREMENTS FOR THE ELECTRICAL EQUIPMENT OF ROOM AIR CONDITIONERS
未注明发布机构, Indoor Air Testing Equipment
-
- BS EN 50543:2011(2014) Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and / or carbon monoxide in indoor ambient air — Requirements and test methods
- BS ISO 16000-17:2008(2010) Indoor air Part 17 : Detection and enumeration of moulds — Culture - based method
American National Standards Institute （ANSI), Indoor Air Testing Equipment
Korean Agency for Technology and Standards (KATS), Indoor Air Testing Equipment
- KS I ISO 16000-17:2012 Indoor air－Part 17：Detection and enumeration of moulds－Culture-based method
- KS I ISO 16000-16:2012 Indoor air－Part 16：Detection and enumeration of moulds－Sampling by filtration
- KS B ISO 13261-2-2002(2017) Sound power rating of air－conditioning and air－source heat pump equipment－Part 2：Non－ducted indoor equipment
- KS B ISO 13261-2:2002 Sound power rating of air－conditioning and air－source heat pump equipment－Part 2：Non－ducted indoor equipment
- KS B ISO 13261-2-2002(2022) Sound power rating of air－conditioning and air－source heat pump equipment－Part 2：Non－ducted indoor equipment
- KS I ISO 16000-18:2013 Indoor air ― Part 18: Detection and enumeration of moulds ― Sampling by impaction
- KS I ISO 16000-17-2012(2017) Indoor air－Part 17：Detection and enumeration of moulds－Culture-based method
- KS I ISO 16000-16-2012(2022) Indoor air－Part 16：Detection and enumeration of moulds－Sampling by filtration
- KS I ISO 16000-17-2012(2022) Indoor air－Part 17：Detection and enumeration of moulds－Culture-based method
- KS I ISO 16000-16-2012(2017) Indoor air－Part 16：Detection and enumeration of moulds－Sampling by filtration
- KS I ISO 16000-21-2014(2019) Indoor air — Part 21: Detection and enumeration of moulds — Sampling from materials
- KS I ISO 16000-18-2013(2018) Indoor air ― Part 18: Detection and enumeration of moulds ― Sampling by impaction
- KS I ISO 5219:2007 Air distribution and air diffusion-Laboratory aerodynamic testing and rating of air terminal devices
- KS I ISO 16000-21:2014 Indoor air — Part 21: Detection and enumeration of moulds — Sampling from materials
- KS R ISO 5011:2008 Inlet air cleaning equipment for internal combustion engines and compressors－Performance testing
- KS R ISO 5011:2018 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
- KS I ISO 4872-2002(2017) Acoustics－Measurement of airborne noise emitted by construction equipment intended for outdoor use－Method for determining compliance with noise limits
- KS I ISO 4872:2002 Acoustics－Measurement of airborne noise emitted by construction equipment intended for outdoor use－Method for determining compliance with noise limits
Danish Standards Foundation, Indoor Air Testing Equipment
- DS/ISO 13261-2:2002 Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment
- DS/ISO 16000-16:2009 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration
- DS/ISO 16000-18/Cor. 1:2012 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction
- DS/ISO 16000-18:2011 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction
- DS/EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- DS/ISO 16000-17/Corr. 1:2009 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method
- DS/ISO 16000-17:2009 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method
- DS/EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements
- DS/EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
HU-MSZT, Indoor Air Testing Equipment
Association of German Mechanical Engineers, Indoor Air Testing Equipment
- VDI 6022 Blatt 6-2013 Ventilation and indoor-air quality - Air humidification on decentralised devices - Planning, construction, operation, maintenance
- VDI 2100 Blatt 4-2015 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Methods of preparing calibration gases and calibration solutions
- VDI 6022 Blatt 6 Berichtigung-2016 Ventilation and indoor-air quality - Air humidification on decentralised devices - Planning, construction, operation, maintenance - Corrigendum concerning standard VDI VDI 6022 Blatt 6:2013-12
Professional Standard - Construction Industry, Indoor Air Testing Equipment
- JG/T 498-2016 Simple sampling instrument detection method for indoor air pollution in buildings
VN-TCVN, Indoor Air Testing Equipment
- TCVN 7327-2-2003 Sound power rating of air-conditioning and air-source heat pump equipment.Part 2: Non-ducted indoor equipment
Association Francaise de Normalisation, Indoor Air Testing Equipment
- NF ISO 16000-6:2021 Air intérieur - Partie 6 : dosage des composés organiques (COTV, COV, COSV) dans l'air intérieur et l'air de chambre d'essai par prélèvement actif sur tubes à sorbant, désorption thermique et chromatographie en phase gazeuse avec détection M...
- NF ISO 16000-18:2011 Air intérieur - Partie 18 : détection et dénombrement des moisissures - Échantillonnage par impaction
- NF ISO 16000-17:2009 Air intérieur - Partie 17 : détection et dénombrement des moisissures - Méthode par culture
- NF ISO 16000-21:2014 Air intérieur - Partie 21 : détection et dénombrement des moisissures - Échantillonnage à partir de matériaux
- NF ISO 16000-16:2009 Air intérieur - Partie 16 : détection et dénombrement des moisissures - Échantillonage par filtration
- NF X43-404-21*NF ISO 16000-21:2014 Indoor air - Part 21 : detection and enumeration of moulds - Sampling from materials
- NF ISO 16000-20:2015 Air intérieur - Partie 20 : détection et dénombrement des moisissures - Détermination du nombre total de spores
- NF X43-404-20*NF ISO 16000-20:2015 Indoor air - Part 20 : detection and enumeration of moulds - Determination of total spore count
- NF EN 50543:2011 Matériels électroniques portables et transportables de détection et de mesure du dioxyde de carbone et/ou du monoxyde de carbone dans l'air ambiant intérieur des locaux - Exigences et méthodes d'essai
- NF X43-404-18*NF ISO 16000-18:2011 Indoor air - Part 18 : detection and enumeration of moulds - Sampling by impaction.
- NF X43-007:2008 Air quality - Ambient air - Determination of the mass of dry atmospheric depositions - Sampling on deposit plates - Preparation and treatment.
- NF C23-543*NF EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods.
- NF EN 50194-1:2009 Matériels électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Partie 1 : méthodes d'essai et exigences d'aptitude à la fonction
- NF EN ISO 16000-10:2006 Air intérieur - Partie 10 : dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Méthode de la cellule d'essai d'émission
- NF EN 50244:2016 Appareils électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Guide de sélection, d'installation, d'utilisation et de maintenance
- NF EN ISO 16000-11:2006 Air intérieur - Partie 11 : dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Échantillonnage, conservation des échantillons et préparation d'échantillons pour essai
- NF EN ISO 16000-9:2006 Air intérieur - Partie 9 : dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Méthode de la chambre d'essai d'émission
- NF EN 50291-1:2018 Détecteurs de gaz - Appareils électriques pour la détection de monoxyde de carbone dans les locaux à usage domestique - Partie 1 : méthodes d'essai et exigences de performances
- NF EN 50194-2:2019 Matériels électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Partie 2 : matériels électriques en fonctionnement continu et en installation fixe dans les véhicules de loisir et locaux similaires - Méthodes d...
- NF F90-272-2*NF EN 16272-2:2013 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: intrinsic characteristics - Airborne sound insulation in the laboratory under diffuse s
- NF C23-560-2:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 2 : performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air.
- NF C23-560-3:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 3 : performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air.
- NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
Japanese Industrial Standards Committee (JISC), Indoor Air Testing Equipment
- JIS C 9815-2:2013 Sound power rating of air-conditioning and air-source heat pump equipment.Part 2: Non-ducted indoor equipment
- JIS C 62610-6:2021 Mechanical structures for electrical and electronic equipment -- Thermal management for cabinets -- Part 6: Air recirculation and bypass of indoor cabinets
International Organization for Standardization (ISO), Indoor Air Testing Equipment
- ISO 16000-18:2011 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction
- ISO 16000-16:2008 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration
- ISO 16000-21:2013 Indoor air.Part 21: Detection and enumeration of moulds.Sampling from materials
- ISO 5219:1984 Air distribution and air diffusion; Laboratory aerodynamic testing and rating of air terminal devices
- ISO 16000-20:2014 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count
- ISO 5011:2020 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
- ISO/DIS 16000-22:2023 Indoor air — Part 22: Detection and quantification of fungal biomass by fungal β-N-acetylhexosaminidase enzyme activity
- ISO 4872:1978 Acoustics; Measurement of airborne noise emitted by construction equipment intended for outdoor use; Method for checking compliance with noise limits
- ISO 4872:1978/Cor 1:1979 Acoustics; Measurement of airborne noise emitted by construction equipment intended for outdoor use; Method for checking compliance with noise limits
- ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
German Institute for Standardization, Indoor Air Testing Equipment
- DIN ISO 16000-18:2012-01 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011)
- DIN ISO 16000-21:2014-05 Indoor air - Part 21: Detection and enumeration of moulds - Sampling from materials (ISO 16000-21:2013)
- DIN ISO 16000-16:2009-12 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration (ISO 16000-16:2008)
- DIN ISO 16000-20:2015-11 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
- DIN ISO 16000-18:2012 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011)
- DIN ISO 16000-17:2010-06 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method (ISO 16000-17:2008)
- DIN EN 50291:2002 Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements; German version EN 50291:2001
- DIN ISO 16000-20:2015 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
- DIN ISO 16000-21:2014 Indoor air - Part 21: Detection and enumeration of moulds - Sampling from materials (ISO 16000-21:2013)
American Society for Testing and Materials (ASTM), Indoor Air Testing Equipment
- ASTM E2320-04 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
- ASTM E2320-04(2012) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
- ASTM D6306-98(2003) Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
- ASTM D6306-98 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
Anhui Provincial Standard of the People's Republic of China, Indoor Air Testing Equipment
- DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air
AENOR, Indoor Air Testing Equipment
- UNE 100710:1992 AIR DISTRIBUTION AND AIR DIFFUSION. LABORATORY AERODYNAMIC TESTING AND RATING OF AIR TERMINAL DEVICES.
- UNE-EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- UNE-EN 50244:2001 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.
- UNE-EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
European Committee for Standardization (CEN), Indoor Air Testing Equipment
- EN 50194:2000 Electrical Apparatus for the Detection of Gases in Domestic Premises - Test Methods and Performance Requirements
Henan Provincial Standard of the People's Republic of China, Indoor Air Testing Equipment
- DB41/T 1785-2019 Safety code for inspection and testing of confined spaces inside special pressure equipment
Lithuanian Standards Office , Indoor Air Testing Equipment
- LST EN 50543-2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- LST EN 50543-2011/AC-2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- LST EN 50244-2002 Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
- LST EN 50194-1-2009 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements
- LST EN 624-2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
European Committee for Electrotechnical Standardization（CENELEC）, Indoor Air Testing Equipment
- EN 50543:2011/AC:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- EN 50194-1:2023 Electrical apparatus for the detection of flammable gases in household premises - Part 1: Test methods and performance requirements
- EN 45544-2:1999 Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 2:Performance Requirements for Apparatus Used for Measuring Concentrations in the Region of Limit Values
未注明发布机构, Indoor Air Testing Equipment
-
- BS EN 50543:2011(2014) Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and / or carbon monoxide in indoor ambient air — Requirements and test methods
- BS ISO 16000-17:2008(2010) Indoor air Part 17 : Detection and enumeration of moulds — Culture - based method
ES-UNE, Indoor Air Testing Equipment
- ESPECIFICACION UNE 0068:2020 Safety requirements for UV-C equipment used for room air disinfection and surfaces
- UNE-EN 50291-1:2018/AC:2021-01 Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements (Endorsed by Asociación Española de Normalización in February of 2021.)
- UNE-EN 50291-1:2018 Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements (Endorsed by Asociación Española de Normalización in June of 2018.)
SE-SIS, Indoor Air Testing Equipment
- SIS SS IEC 710:1984 Nuclear instrumentation — Radiation protection equipment for the measuring and monitoring of airborne tritium
- SIS SS-ISO 5011:1991 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
- SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air
KR-KS, Indoor Air Testing Equipment
- KS R ISO 5011-2018 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
International Electrotechnical Commission (IEC), Indoor Air Testing Equipment
- IEC TR2 61462:1998 Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations
- IEC 61779-2:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
- IEC 61779-3:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
RO-ASRO, Indoor Air Testing Equipment
- STAS 11300-1983 SYNTHETIC RESIN INSULATING PARTS FOR INDOOR ELECTRICAL EQUIPMENT Umidity and under condensation test
SG-SPRING SG, Indoor Air Testing Equipment
- SS 146 Pt.2-6-1986 SPECIFICATION FOR Safety Of Household And Similar Electrical Appliances Part 2:6: Particular Requirements For Room Air Conditioners
Professional Standard - Machinery, Indoor Air Testing Equipment
- JB/T 50128-1999 3.6 ~ 40.5kV AC high voltage switchgear used vacuum interrupter product quality inspection guidelines (internal use)
CENELEC - European Committee for Electrotechnical Standardization, Indoor Air Testing Equipment
- EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements
- EN 61779-3:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 100% Methane in Air
ZA-SANS, Indoor Air Testing Equipment
- SANS 8561:1995 Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods
- SANS 50250:2003 Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking
PT-IPQ, Indoor Air Testing Equipment
- NP 3222-1989 Acoustics Measurement of airborne noise emitted by constructíon equipment intended for outdoor use
BE-NBN, Indoor Air Testing Equipment
- NBN-ISO 4872:1992 Acoutics - Measurement of airborne noise emitted by construction equipment intended for outdoor use - Method for checking compliance with noise limits
Professional Standard - Commodity Inspection, Indoor Air Testing Equipment
- SN/T 1843.4-2014 Rules for the inspection of electrical equipment for measurement,control,and laboratory use for import and export.Part 4:Insulation resistance meter